anyone need .38 special casings i have way too many would like to trade for other casings nw calgary i could use 357 casings or 7.62x39 open to other offers

categories:GunsSporting Goods

6984 impressions

189 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

11648 impressions

520 views

Took off from my Ruger made Marlin Dark Series 30-30 Still brand new No scratches or defects Will accept non-corrosive ammo (12 gauge, 357, 45-70, 308, 7.62x39) in trade/ partial trade Can ship for extra

categories:GunsSporting Goods

14094 impressions

214 views

Price is Firm Brand New, Never used Comes with box and all accessories Lifetime Warranty Premium Quality Made of Aerospace Grade Titanium Very durable Polarized Glass Rear Weight Design 100% UVA and UVB, and UV400 protection Both Black (frame) and Black (Glass) and Black and Blue available. Can ship anywhere in Canada for extra $10 Please follow the link below for further details: https://www.williampainter.com/collections/sunglasses/products/titanium-sunglasses?variant=1088032377 Will accept non-corrosive ammo (12 gauge, 357, 45-70, 308, 7.62x39) in trade/ partial trade

categories:Sporting Goods

6579 impressions

374 views

Took off from my Marlin Dark Series 30-30 Still brand new No scratches or defects Comes with the cheek riser Original Handguard also available (please see my other ad) Will accept non-corrosive ammo (12 gauge, 357, 45-70, 308, 7.62x39) in trade/ partial trade Can ship for extra

categories:GunsSporting Goods

50175 impressions

862 views

Brand New Will accept non-corrosive ammo (12 gauge, 357, 45-70, 308, 7.62x39) in trade/ partial trade Can ship for extra

categories:GunsSporting Goods

43237 impressions

679 views

UTG Accushot SWAT 3-12×44 Barely used Comes with the box, rings and flip up covers Add-on index wheel included Will accept non-corrosive ammo (12 gauge, 357, 45-70, 308, 7.62x39) in trade/ partial trade Price is firm

categories:GunsSporting Goods

42932 impressions

1215 views

In excellent condition Comes with box and accessories Will accept non-corrosive ammo (12 gauge, 357, 45-70, 308, 7.62x39) in trade/ partial trade Can ship for extra

categories:Sporting Goods

5807 impressions

283 views

Just like new Comes with the box and accessories Will accept non-corrosive ammo (12 gauge, 357, 45-70, 308, 7.62x39) in trade/ partial trade Can ship for extra

categories:GunsSporting Goods

30639 impressions

855 views

Brand New Silver Color Will accept non-corrosive ammo (12 gauge, 357, 45-70, 308, 7.62x39) in trade/ partial trade Can ship for extra

categories:GunsSporting Goods

41261 impressions

684 views

Non-restricted Caliber: 7.62x39 Mounted in the ATI Strikeforce SKS TactLite Six Position Adjustable Side-Folding Stock w/ Scorpion Recoil System The gun is a surplus used rifle with a brand new ATI stock which was installed by the supplier Color in Black and FDE The picture is a sample.

categories:GunsSporting Goods

18869 impressions

1639 views

MDT Magazine Metal short action AICS 308win / 6.5 Creedmoor 12 round on binder Plate 2.960 Max COAL These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard. Available with or without the front binder plate. See details below for benefits and limitations of each version. DETAILS MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction. SPECIFICATIONS * 3.055” Outside Length * 2.870” max cartridge overall length (COAL) with binder plate * 2.960” max cartridge overall length (COAL) without binder plate (see limitations below) * 4.61” Rear Height COMPATIBILITY These magazines will need to be slightly modified to function with Howa 1500 SA rifles. * 308WIN * 6mm Creedmoor * 243WIN * 260 Rem * 6.5 Creedmoor * 7mm-08 Win * 308/7.62x51 NATO * 22 - 250 Rem (will work at a reduced capacity) BINDER PLATE DETAILS * The magazines with front binder plates are compatible with all rifles equipped with AICS-pattern bottom metal or chassis systems. The binder plate holds the cartridges back from the front of the magazines and guides them past the bottom of the feed ramp. The maximum cartridge overall length (COAL) that will fit in this magazine is 2.870”. * The magazines without front binder plates allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp (see photo below).

categories:Sporting Goods

10294 impressions

261 views

These are just surplus to my needs. 30 cal 0.308 7.62mm: Berger VLD hunting- 185gn x 100                             SOLD Barnes 168gn TSX BT - Match Grade x30               $25 Speer Hot-Cor 200gn HCSP x28                                 $25 Speer Hot-Cor 110gn SP x99                                       $75 Hornady 180gn SST x99                                                $75 Hornady 130gn SP x99                                                  $75 If you buy in groups I will take off $5 per additional package leading to a group purchase of $255. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

2304 impressions

125 views

Ammo cases 30 (7.62) Cal and 50 Cal Metal Case Cans for long term storage, Water tight. 50 Cal Outside not fancy but inside is fine 12"×6"×7.24"High 30 Cal is in great condition 11" x 3.8" x 7.1" $20 for both

categories:GunsSporting Goods

13096 impressions

479 views

Brand new still in original packaging. Works with any 30 caliber or smaller diameter caliber with a 5/8-24 thread pitch. Retails for $250. $18 for shipping, but also open to local sale.

categories:GunsSporting Goods

1368 impressions

97 views

Caliber: 7.62x39 Bullet weight: 124 gr Full Metal Jacket  Lead Core ( NOT stick to magnetic) Brass Cases Boxer Primmed Non corrosive Per can of 900 rounds   Made in Hungary

categories:GunsSporting Goods

1109 impressions

121 views

Brand new Non-restricted Caliber: 308 WIN (Accepts 7.62 NATO) Action: Bolt Capacity: 4+1 Rounds Barrel: 22″ Fluted Threaded Overall Length: 42.75" Finish: Matte Blued Detachable Magazine Length Of Pull: 13.75" Weight: 9 LBS Rate Of Twist: 1:10" Safety: Two Position Scope: UTG 6-24x50mm Picatinny Rail Stock Finish: OD green Drop box magazine SilencerCo Saker Trifecta muzzle brake Neoprene cheek raising kit with interchangeable inserts Adjustable bipod Trigger: Adjustable LBA Coming with: 1 Magazine 1 UTG Scope 1 Bipod Made in USA

categories:GunsSporting Goods

8258 impressions

520 views

Surplus Non restricted Bolt action Caliber: 7.62x54R Capacity: 5 Made in 1956 by Factory 26 The serial number on bolt does not match The condition is 6/10 and the rifling is dark and dirty The cleaning rod missing  The folding bayonet functions fine Still shootable The trigger is smooth Made in China

categories:GunsSporting Goods

2720 impressions

171 views

Brand new FDE stock and Magazine.

categories:GunsSporting Goods

1947 impressions

141 views

I have 8 brass casings for a 7.62x51 that have been shot once & tumbled clean for $5

categories:GunsSporting Goods

2066 impressions

320 views

Brass (New) and Once Fired - ( $.25 - $.75 @ Casing) (New - $1.00 each) - Total Brass approx 65,000+ (call for break down) - 357 Mag - 44 Mag - 9mm - .308 - 30-06 - 300 Win Mag - 7.62X51 - 7.62X39 - 45/70 Bullets in the thousands - BT Bullets and lead Bullets

categories:Sporting Goods

4823 impressions

379 views