WTB Hi everyone, As the ad say’s. I know there are some of these out there, so if you have one you want to sell, please message me. Condition not that important, but MUST be fully functional. Thanks!

categories:GunsSporting Goods

454 impressions

40 views

Remington SPR ( Spartan) Modified choke. New

categories:GunsSporting Goods

5237 impressions

148 views

Remington 597 scope mount rail.

categories:GunsSporting Goods

23894 impressions

554 views

.45 ACP AMMO - 230 GR FMJ FIOCCHI - 500 RDS. - $375 REMINGTON UMC - 800 RDS. - $480 Pick up in Calgary only. Valid PAL is a must. Serious buyers please text: 587-438-7532

categories:GunsSporting Goods

2897 impressions

117 views

Just in time for Christmas , Overall, the condition of this model eight is in good to very good condition. The pictures hopefully speak for themselves. No cracked wood. Everything appears to function as it should. Serial Number: 40571 on receiver and 40571 on the band in front of receiver. *I also have ammunition that can be purchased and shipped separately at additional cost If needed. Can ship anywhere in Canada, Please see my other ads for collectible, firearms, and accessories.

categories:GunsSporting Goods

32211 impressions

858 views

20 rounds of 30 Remington AR 150 grain. I can ship anywhere in Canada. *Please see my other adds for Collectable Rifles, Ammo & Accessories.

categories:GunsSporting Goods

38224 impressions

1184 views

Cal. 30-06. Serial# 4798918. Bbl.24". Marked behind front sight "SC" with a flaming bomb and "10-43." Aperture rear sight graduated to 800 yards. Blade front sight. Swept bolt marked on top of handle "B2" and marking underneath appears as "F." Safety lug is Remington style, as is the bolt shroud. All stamped furniture, including large bow triggerguard and fine checkered trap buttplate. Walnut stock set with two recoil bolts. The grip is marked underneath with encircled "P" proof. Assembly marks are visible ahead of the trigger guard. CONDITION: stock set has a and bruises in its appearance commensurate with extensive service. There are numerous handling marks. The metal retains its original finish with some thinning and wear. Very good, shiny 4-groove bore. also comes with a leather combat sling. Can ship anywhere in Canada, Please see my other ads for rare firearms, accessories, and ammunition.

categories:GunsSporting Goods

14706 impressions

388 views

More modern Hunting ammunition is $65 a box. The collector grade ammunition I have is $85 a box and it’s old. *the 3 boxes of Remington sold in the yellow/green. Can ship anywhere in Canada. Please see my other ads and collectable firearms and accessories.

categories:GunsSporting Goods

8680 impressions

337 views

Wow look at this find! I would say in pretty good condition overall 8+ out of 10 with very few bumps and bruises for its age but no crack stock, Rifling looks very present as well. Comes with original canvas carrying case as well as seen in the pictures. Can ship anywhere in Canada please see my other ads for rare and collectable rifles and accessories,

categories:GunsSporting Goods

40743 impressions

1194 views

Remington 742 BDL 30-06 Semi auto 4 round plus one I also have a set of see through 1” tube rings with direct mount screws with it . Pal ver req. Pick up NW Calgary Prefer local sale Open to trades and offers Asking $825

categories:GunsSporting Goods

8359 impressions

633 views

12 gauge pump action super magnum in mossy oak. Maybe put a dozen rounds through it. Still in great condition. Soft shell case is extra.

categories:GunsSporting Goods

1316 impressions

123 views

Brand new Non-Restricted Calibre: .308 WIN Capacity: 4+1 Action: Bolt Barrel: 22" Overall Length: 41-5/8" Twist Rate: 1:10  Weight: 7-3/8 lb. Sling swivel studs Finish: Blue Stock Material: Synthetic Weaver 3-9×40 scope and rings Made in USA

categories:GunsSporting Goods

5781 impressions

381 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5549 impressions

385 views

Howdy Townpost! I've got a sweet little custom job for sale here. This is a CBC made Remington 812. CIL sold these same shotguns as another model name too. These are really well built shotguns. They're quite beefy and made of a good quality hard steel. Nice and light but not too light at 5.5lbs. It has a 2 3/4 inch chamber and a cylinder bore (obviously). It comes with sling swivels attached and a nice padded leather sling as pictured. The OAL on this bad boy is 26.5" and the barrel measures at 18.4". The legal lengths for a non-restricted firearm are 26"for OAL and 18" for the barrel if you are shortening it on a manual action. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. It's very short when broken down, and is light so it should be relatively inexpensive to ship. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:GunsSporting Goods

9758 impressions

597 views

Total 140 shells 3 boxes 150gr federal hunting 3 boxes 174gr Remington FMJ. 1 box 180gr PPU hunting rounds. $250 for everything Open to offers or trades for other calibres. 22lr, 223, 30-30, 455 Webley, Meet up in Calgary/airdrie

categories:GunsSporting Goods

1343 impressions

97 views

I have a very low round count Remington 700 sps tactical in .223 Remington with the 16” heavy barrel sitting in a fde magpul stock comes with muzzle break, rail,2 10 round mags as well. Shipping is on buyer. Pal a must

categories:GunsSporting Goods

28660 impressions

1394 views

30-30 WIN 1 box (of 20)of Hornady Lever evolution 160 gr FTX 16 rounds of Remington Core-Lokt 30-30 caliber Win 170 Grain Soft Point Cartridges Will prefer to sell all together Local sale only Will consider trading for 12 Ga 2-3/4 Shot Shells (at least 200 shells), 357 Rem Mag or 44-40 WCF Ammo

categories:GunsSporting Goods

23372 impressions

833 views

Alliant 17 powder 1 lbs. $150 IMR 4350 powder 1 lbs. $90 Win. 748 powder 1 lbs. $110 Alliant 23 powder. SOLD IMR 7828 SSC 8 lbs. SOLD Hod. H335 1 lbs. $110. Hod. Varget 1 lbs $110. IMR 4320 1 lbs SOLD Win. 6.5 Staball 1 lbs $100 H380 1 lbs $110 IMR 4895 1 lbs. $110 BLC 2 1 lbs. $110 IMR 4064 1 lbs. $110 Primers: Remington 9 1/2 Mag. 1000 $200.

categories:GunsSporting Goods

11613 impressions

659 views

Remington Magnum Primers 9 1/2 M for sale. $20 per sleeve.

categories:Sporting Goods

16509 impressions

578 views

Remington 783 .308 win, 24" medium profile barrel, black cerakote finish barrel and action, flat dark earth color stock, it comes with a Vector Optics Scope, a picatinny rail, and scope rings. The scope is a Vector Optics Atlas 5-30x56 SFP Long Range Riflescope 35mm Tube, 1/8MOA illuminated, Elevation Range: 85MOA,Windage Range:85 MOA German HD Schott glass. Specification Model: Remington 783 Action: Bolt Magazine Type: Detachable Stock Type: Fixed Trigger Type: CrossFire Muzzle Type: Threaded Magazine Capacity: 4 Caliber/Gauge: 308 Winchester Twist Rate: 1:10″ Receiver Material: Steel Stock Material: Synthetic Barrel Finish: Matte Blue Stock Finish: Flat Dark Earth Barrel Length: 24″ Length of Pull: 13-3/8″ Overall Length: 43-5/8″ Weight: 7 lb Drop at Comb: 1″ Drop at Heel: 1-5/8″ Barrel Type: Medium Profile Button-Rifled To purchase this rifle, must comply with the law, I am required by law to see two pieces of ID: possession of firearms license and a piece of ID. I do offer shipping Canada-wide at the buyer's expense.

categories:GunsSporting Goods

62411 impressions

2508 views

MDT Magazine Metal short action AICS 308win / 6.5 Creedmoor 12 round on binder Plate 2.960 Max COAL These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard. Available with or without the front binder plate. See details below for benefits and limitations of each version. DETAILS MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction. SPECIFICATIONS * 3.055” Outside Length * 2.870” max cartridge overall length (COAL) with binder plate * 2.960” max cartridge overall length (COAL) without binder plate (see limitations below) * 4.61” Rear Height COMPATIBILITY These magazines will need to be slightly modified to function with Howa 1500 SA rifles. * 308WIN * 6mm Creedmoor * 243WIN * 260 Rem * 6.5 Creedmoor * 7mm-08 Win * 308/7.62x51 NATO * 22 - 250 Rem (will work at a reduced capacity) BINDER PLATE DETAILS * The magazines with front binder plates are compatible with all rifles equipped with AICS-pattern bottom metal or chassis systems. The binder plate holds the cartridges back from the front of the magazines and guides them past the bottom of the feed ramp. The maximum cartridge overall length (COAL) that will fit in this magazine is 2.870”. * The magazines without front binder plates allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp (see photo below).

categories:Sporting Goods

10294 impressions

261 views