Description - Thread Protector with high temperature retaining O-Ring (up to 400°F) - Friction and Compression of the O-Ring retains the Thread Protector and prevents it from loosening off *Extreme rapid discharge will result in temperature exceeding 400°F and loosen the Thread Protector Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Tracked shipping (for an additional cost) available upon request. Brand: Created by Cay (Yes it's my original design) ___________________________________ What's Included - 1x Thread Protector 1/2"x28" - 1x Viton O-Ring Thread Protector Specifications - Material: AISI 4140 Steel - Finish: Knurled Matte Black Oxide (Blued) - Weight: 0.5oz (14g) - Dimensions: OD: 0.728" (18.5mm) / Length: 0.492" (12.5mm) - Weight: 0.5oz (14g) O-Ring Specifications - Material: Viton® Fluoroelastomer Rubber - Finish: Black - Max Temperature: 400°F (204°C) - Hardness: Durometer 75A (Medium) - Dimensions: OD: 0.591" (15mm) / ID: 0.472" (12mm) / Width: 0.060" (1.5mm) - Finish: Black *5/8"x24 coming soon Instructions 1. Check and make sure the firearm is unloaded. 2. Loosen off the stock thread protector or muzzle device in the counter clockwise direction. 3. Clean the thread (if necessary). 4. Install the High Temperature O-Ring over the threaded barrel. Do not overstretch the O-Ring, light pressure is sufficient the slide the O-Ring over the threads. 5. Install the Thread Protector in the clockwise direction. 6. Note that the Thread Protector can be installed in either directions. The smooth direction facing the O-Ring for more compression/friction or the cutout direction facing the O-Ring for a flush/clean connection. ***Video Instructions Coming Soon***

categories:Sporting GoodsGuns

19878 impressions

720 views

Barnes .451” 250grain TTSX for sale. I’ve got 5 full boxes plus opened box containing 14 (almost 6 boxes). Asking $150 picked up in Rocky Mtn. House, or $175 shipped.

categories:Sporting GoodsGuns

3695 impressions

223 views

6 boxes of 264 won mags and I got 5 boxes of brass 250 takes it all

categories:Sporting GoodsGuns

1965 impressions

265 views

1) Marlin 336 - 1894 - 1895 Folding Rear Sight & Elevator - $170 3) Marlin Front Sight Ramp (0.7" C-C) with Screws  -  $85.00 4) Marlin Front Sight Ramp (1.0" C-C) with Screws  -  $85.00 5) Marlin 336 Front Sight Ramp - Sight Insert - (298") - $75 6) Marlin 336 Hood (1972 to Present Day) - $60 7) Marlin 336 Hood (pre 1972 Rifles) - $45 8) Marlin S-27 Rear Sight & Elevator  - $155 9) Marlin Rocky Mountain Rear Sight with Elevator - $295 10) Marlin Fishhook Elevator - $35 11) Marlin 336 - 1894 Front Barrel Band Screw (pre 84) - $45 12) Marlin 336 - 1894 Front Barrel Band Screw (post 84) - $45 13) Marlin 336 - 1894 Rear Barrel Band Screw - $45 14) Marlin Bullseye Stock Inlay  -  $35.00 15) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45.00 16) 8-40 Pan Head Filler Screws (2) - Blue  -  $20.00 17) 6-48 Pan Head Filler Screws (2) - Blue  -  $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

81282 impressions

2144 views

Lee Precision shell holders. Various like 45 Long Colt exc. Numbers are: 2x # 14(5), #2A(3), #6 (3)?, #9 (3)?, 1 x #7A (3), 1 x #7A (5). Price: $ 30.00 each.

categories:Sporting GoodsGuns

64513 impressions

3375 views

Brand New Non-Restricted Action: Lever Action Caliber: .45-70 Govt Barrel Length: 16.5 Inch Mag Capacity: 5 Front Sight – Drift Adjustable Rear Sight – Peep Hole Sight on Picatinny Rail Twist Rate – 1:12″ RH Grooves – 6 Overall Length – 35.50 In. Stock Material – Wood Frame Material – Alloy Steel Model Number: 954570161TB

categories:Sporting GoodsGuns

6981 impressions

398 views

Brand new Non-Restricted Caliber: ..223 Remington / 5.56 Capacity: 5 Action: Semi Automatic Finish: Anodized Safety: Manual Safety Barrel Length: 18.6” Sights: Full Length Top Rail, Optic Ready Trigger Pull: 5-7 lbs. Weight: 6.8 lbs. Comes with Double ended 5rds Magazine x 6

categories:Sporting GoodsGuns

1439 impressions

89 views

1) Sako - Tikka Rear Sight - (0.56" / 9/16" C-C) - $195.00 . 2) Sako - Tikka - Blade Rear Sight - 1 screw - $225.00 . 3) Sako - Tikka - Front Sight w/ Sight Insert & Screws (1.2" / 30mm C-C) - $275.00 . 4) Sako - Tikka - Front Sight Ramp w/ Sight Insert, Hood & Screws (1.2" / 30mm C-C) - $350.00 . 5) Sako Front Sight Ramp (2 screws) - without Sight Insert (0.75" C-C) - $75.00 . 6) Sako 85 Front Sight Hood - $85.00 . 7) Sako / Browning Front Sight Hood - $85.00 . 8) Sako AIII - Finwolf Front Sight Hood - $85.00 . 10) 6-48 Filler Screws (4) - Blue - $20.00 . 11) 6-48 Pan Head Filler Screws (4) - Blue - $20.00 . 12) 6-48 Filler Screws (4) - Stainless - $20.00 . 13) 8-40 Pan Head Filler Screws (2) - $20.00 . 14) 3/8" DT Filler - Curved Top - $45.00 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:Sporting GoodsGuns

103423 impressions

3843 views

Brand New Non-Restricted Action: Semi Auto/ Pump Caliber: 12GA Capacity: 5 Barrel Length: 20" Ghost Ring Iron Sights Dual-Mode Capability Inertia-Driven Operating System Rough texture touchpoints Lifetime Warranty Coming with: Manual and choke tube kit. By using the receiver of an existing non-restricted shotgun we have been able to add M3 style components to achieve the same look, feel and function of the legendary M3 Super 90, but without the prohibited classification. The TAC-12 “M3 Super 90” is a dual-mode semi-automatic and pump action 12GA shotgun. It can be quickly converted from autoloading to pump by simply turning a spring loaded ring located on the end of the forearm. The M3 was developed in the 1980’s for special operations and elite law enforcement units who required a shotgun that could adapt to various tactical roles. It’s dual-mode system allows for effective operation of both standard and special purpose ammunition, (i.e. rubber, tear, flare, etc.) on the fly. The M3 was designed to operate under the most adverse conditions and boasts easy handling, accuracy and a high rate of fire. Notable adopters include the Canadian JTF2, Czech 601st Special Forces Group and French GIGN. The TAC-12 “M3 Super 90” features a 20” barrel threaded for interchangeable chokes. It has a 3” chamber and is fed by a 5-shot tubular magazine (6 shots, 2.75”). The extended magazine tube features a barrel clamp for additional durability. There is a magazine cut-off/chamber-dump button so the shooter can directly chamber a special round without having to cycle through the entire magazine. Fixed on top of the receiver are 3-dot ghost-ring sights for fast target acquisition, and tapped holes for the addition of an optional top picatinny rail. The stock is fixed polymer with non-slip grip checkering, with a rubber buttpad and a sling loop located on both sides. The pump handle is ergonomically shaped with non-slip channels for use with gloves or in wet environments. As the original, it is operated by the proven inertia system. This system delivers unmatched reliability, cleaner operation, and lightning-fast cycling in a lightweight, ultra-durable design. With fewer moving parts and minimal maintenance, it handles the toughest conditions with ease.

categories:Sporting GoodsGuns

4859 impressions

253 views

Brand new Non-restricted Bolt action Caliber: 6.5 Creedmoor Capacity: 4 Magazine: Flush Fit Material: Alloy Steel Stock: Olive Green Synthetic Sights: Weaver Rail Barrel: 22", Cold Hammer Forged Twist: 1:8" RH, 6 Grooves Finish: Matte Black Overall Length: 42" Weight: 7.6 lbs. Equipped with a factory-installed Vortex® Crossfire II® riflescope with the Dead-Hold BDC reticle mounted on one-piece Picatinny scope base. Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user adjustable between 3 and 5 pounds, allowing shooters to make that perfect shot. Ergonomic, lightweight synthetic stock designed for quick, easy handling blends a classic look with modern forend contouring and grip serrations. Soft rubber buttpad is crafted for maximum recoil reduction. The one-piece, three-lug bolt with 70° throw provides ample scope clearance and utilizes a full diameter bolt body and dual cocking cams for smooth, easy cycling from the shoulder. Patented Power Bedding®, integral bedding block system positively locates the receiver and free-floats the barrel for outstanding accuracy. Factory-installed, one-piece Picatinny scope base. Outstanding accuracy helps make every hunt a success. Heavier tapered, threaded barrel with factory-installed thread protector is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity. The visible, accessible and easy-to-actuate tang safety provides instant security. Coming with: Vortex Crossfire II 4-12 x 44 Riflescope w/ Rings 1x Magazine 1x Cable Lock Manual Made in USA

categories:Sporting GoodsGuns

23500 impressions

1009 views

223 1 box of Federal tactical 55 Gr Nosler ballistic tip for $20 303 British 1 box of federal powershok for $75 22 525 round box of Remington golden bullet for $50 Lots of little 50 round boxes of mixes brands for sale 16 gauge 2 boxes of standard velocity Aguila 2-3/4” size 6 birdshot shells for $20 a box Box of 22 shells of imperial 2-3/4” size 4 for $10 3 boxes of federal 2-3/4” rifled slugs for $10 a box 1 box of Winchester Super X 2-3/4” rifled slugs for $5 9MM Luger 1 box of 49 federal 124 gr hydrashok jacketed HPs for $50 1 box of 50 federal 115 JHP for $40 1 box of 50 Winchester SXZ9 115 gr fmj for $20

categories:Sporting GoodsGuns

9790 impressions

780 views

I have 6 pcs ( Amend 2) 18 round magazine pinned to 10 rounds Glock 17 magazines. 5 magazines are brand new and 1 used. $20 For the brand new and $15 for the used one. The reason for selling is I went for the longer mags for my PCC. Thanks for looking.

categories:Sporting GoodsGuns

8777 impressions

729 views

I have the following sets of rings/mounts/rails available. Pickup is on the West end of Edmonton. Please text or call 780-920-6855 as the best way to contact me. Shipping for any items is the expense of the buyer. New in box items are pictured. Items without boxes are in separate bags. Thank you, Tikka T3/T3X 1. Talley Lightweight - 1" - Extra Low - Used, good condition - SOLD 2. Talley Lightweight - 30mm - Low - Used, lapped - SOLD Barrett Fieldcraft These items have been discontinued and are no longer made. 3. Talley Lightweight - 1" - Low - New in box - SOLD 4. Talley Lightweight - 30mm - Low - New in box - SOLD 5. Talley Lightweight - 30mm - Low - Used, good condition (old loctite on screws) - $65 6. Talley Lightweight - 30mm - Medium - New, but no box - $70 7. Talley 0 MOA Rail (Short Action) - New in box - $70 8. Leupold 20 MOA Rail (Short Action) - New in box - SOLD Rings & Levels 9. SWFA SS-Tac 30mm Low Rings with 1" Inserts - New in box - $50 10. SWFA SS-Tac 30mm Bubble Level with 1" Inserts - New in box - $50

categories:Sporting GoodsGuns

22160 impressions

1588 views

Brand New Non-Restricted Action: Lever Action Caliber: .45-70 Govt Barrel Length: 16.5 Inch Mag Capacity: 5 Front Sight – Drift Adjustable Rear Sight – Peep Hole Sight on Picatinny Rail Twist Rate – 1:12″ RH Grooves – 6 Overall Length – 35.50 In. Stock Material – Wood Frame Material – Alloy Steel Model Number: 954570161TB

categories:Sporting GoodsGuns

6079 impressions

265 views

Prices A - Single Sided Kit - $20 B - Double Sided Kit - $30 **$5 off each additional kit for any order combo (2 or more) **Ex. A+B=$50-($5 discount)=$45 Total **3x A=3*$20=$60-2*($5 discount)=$50 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) ___________________________________ Single Sided Specs/Instructions Specifications Black Anodized Stainless Steel Weight: 0.2oz (6g) Length: 0.571" (14.5mm) Equivalent to Magpul Type 1 Sling Mount Kit Kit comes with the following 1x Stainless QD Insert 1x Stainless Washer 1x Stainless Nut 3x Stainless Screws (1/2", 3/4", and 1") What you will need 1/8" Allen Key Wrench 5/16" Socket Screwdriver/Wrench Blue Loctite (Optional) Instructions 1. Insert QD Insert into stock on the desired side 2. Insert one of the 3 screws through the hole on the QD Insert 3. Insert a washer on the opposite side 4. Apply a drop of Loctite on the threads of the nut (optional) 5. Using the Allen Key Wrench and 5/16" Socket fasten the nut on the screw 6. Fasten the assembly until snug using the Allen Wrench ___________________________________ Double Sided Specs/Instructions Specifications - Black Anodized Stainless Steel - Weight: 0.4oz (12g) - Length: 0.571" (14.5mm) *each insert* - Equivalent to Magpul Type 1/Type 2 Sling Mount Kit Kit comes with the following - 2x Stainless QD Insert - 4x Stainless Washer - 3x Stainless Screws (1/2", 3/4", and 1") What you will need - 1/8" Allen Key Wrench - Blue Loctite (Optional) Instructions 1. Insert QD Inserts into stock on both sides of the stock 2. Insert one of the 3 screws through the hole of the unthreaded QD Insert 3. Using the Allen Key Wrench thread the screw and temporally fasten the assembly together 4. Function check using the QD Sling Mount on both sides 5. If the bottom of the screw is protruding too far out, remove the QD Inserts and shim off the QD Inserts with the provided Washers 6. Once the correct Screw and Washer Shims (Optional) is determined, the assembly can be fastened together 7. Apply a drop of Loctite on the threads of the Screw (optional) 8. Fasten the assembly until snug using the Allen Wrench 9. *If the Threaded Insert is spinning on it's own, the Insert can be retained via Retaining Hole with a smaller Allen Wrench (See Last Image)

categories:Sporting GoodsGuns

10622 impressions

1122 views

Unfired, BNIB Browning BLR takedown rifle in 6.5 Creedmoor. It features a 20-inch stainless steel barrel, a laminated gray hardwood stock, a 4-round detachable magazine, and weighs approximately 6.8 pounds. Its unique takedown mechanism allows quick barrel removal without affecting accuracy. Not considering trades, the price is non-negotiable, and PAL verification is required. Prefer FTF sale in Edmonton but can ship at buyer’s cost.

categories:Sporting GoodsGuns

74128 impressions

3491 views

For Sale: Benelli LUPO – 6.5 Creedmoor (Excellent Setup: everything included!) A very accurate and ergonomic precision hunting rifle. The rifle is in excellent condition and comes as a ready-to-shoot package (sighted to 200m). Hits 600m with Hornay 143gr ELD Rifle Features ($1850 + tax) Synthetic black stock with adjustable drop, cast, and trigger reach (shim system with 36 adjustment positions) 24" precision Crio-treated free-floating barrel Factory muzzle brake Detachable double-stack box magazine (5 rounds) Excellent balance and recoil management Optics & Accessories Included (scope $650 + tax, rings with bubble ~$100) Vortex Diamondback 4-16x44 scope ($650 + tax) Vortex rings Bubble level Great setup for long-range shooting, hunting, or precision practice. The scope and accessories are already mounted and zero-friendly.  Cost me around $3000 with bipod and sling, all yours for $2600. Message me if interested or if you’d like more details/photos. NOT intersted in trades!

categories:Sporting GoodsGuns

299 impressions

36 views

Selling, 6.5 mm Krieger Barrel - Palma Rem Varm, 1:8 Twist, 26". Only about of box shells fired. Comes off my 6.5 PRC SAKO Short Action. Comes with muzzle break and thread protector. Will fit Sako and Tikka Action. Barrel finished by Henry. Excellent condition $350 obo.

categories:Sporting GoodsGuns

1092 impressions

53 views

Cadex rifle in 6.5 creedmore. Basically everything you see is new minus 30 rounds down the pipe and it includes 35 boxes of ammo missing 30 rounds total. Price is very firm scope info is in the pictures. No trades. Ammo value is about 2000. scope value 800 mdt rings 250. Pretty good deal for this rifle and its a package deal no i will not sell with out scope or with out ammo. Thank you

categories:Sporting GoodsGuns

6182 impressions

312 views

For sale is my used Tikka T3X Lite stainless in 6.5 Creedmoor. 22.4" barrel, comes with 20 MOA MDT scope rail. Exactly 40 rounds fired, in very good condition. Local deal preferred. Must have valid PAL for transfer. Text or email works best.

categories:Sporting GoodsGuns

8625 impressions

509 views

I have a 1941 XIX 6.5 x52 Carcono single shot for sale. gun is in good working condition, stock is in good condition has some small scratches shown in pictures. bolt is in great condition for age, has been modified to single shot. open to trades. Located in evansburg but make frequent trips to spruce grove .

categories:Sporting GoodsGuns

67019 impressions

3586 views