Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features two classic rings. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 145 g/5.1 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

9902 impressions

411 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-4006 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 34 mm/1.35” Length: 108 mm/4.25” Weight: 154 g/5.4 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

9391 impressions

334 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 147 g/5.2 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

9169 impressions

413 views

Brand new The Hunting Series version of the SP-3022. The SCP-3022 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts feature two separate side clamps and allows the scope to be mounted 70 mm/2.76” further forward than with a non-cantilever mount. 10-degree wedge included 0 MIL/0 MOA Height: 38 mm/1.5” Clearance: 7 mm/.27" (from the bottom of the tube to front of bridge of the mount body) Length: 141 mm/5.55” Weight: 154 g/5.4 oz Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

6114 impressions

365 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3000 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 24.5 mm/1” Clearance: 3.4 mm/.133" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 134 g/4.7 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

8640 impressions

339 views

Brand new High Quality Dehorned Scope Mount Base Based on a decade of experience designing and manufacturing the original Ideal Scope Mount System – including a vast number of accessories – as well as forends and stock assemblies for various firearms The Picatinny Gen2 scope bases feature properly dehorned edges for improved repeatability and a smooth touch. Using 7075 T651 aluminum combining strength and durability with low weight. Rail comes with 6-48x1/4" Torx 10-screws and stainless steel pins for optional pinning of the scope base to the action. Tilt: 6 MIL/20.6 MOA Height: 10 mm/0.39” Length: 155 mm/2.16” Weight: 60 g/2.1 oz (w/ screws - add 0.8 g/0.03 oz for pins) Note: Will also fit Mauser M18. Will not fit rifles threaded for 8-40 scope base screws, such as the Bergara Premier Series. Recommended torque for Torx 10 screws is 15-18 in/lbs.

categories:GunsSporting Goods

6101 impressions

346 views

Brand new No-drill, Picatinny Side Mount for Type 81, manufactured by AK MasterMount USA. The mount was custom engineered and manufactured specifically for the Type 81 rifle and was extensively tested to ensure reliability, durability and zero-holding properties. The side mount installation is completely reversible and does not involve any drilling or permanent alterations to the rifle. Fits all Type 81 versions. This “NO-MOD” steel optic mounting side rail is the perfect accessory for the Type 81 in order to mount optics and accessories. It attaches to the hammer and trigger axis pin holes by the use of threaded axis pins, standard on Type 81 SR and optional as an Optics Ready "OR" model Type 81 SE. Threaded pins are optionally available for rifles without built-in receiver pins. No drilling, tapping, riveting, or gunsmithing needed. This steel side rail is low profile, rock-solid, and parallel to the barrel. The side rail dimensionally is the standard AK pattern, however was specifically designed for the AK MasterMount Optics Mounts for ideal positioning, cheek weld and ergonomics. Made from 1018 steel. The pins are custom manufactured in the USA of Grade 8.8 strength steel.

categories:GunsSporting Goods

10369 impressions

1052 views

Brand new The ROMEO3XL open reflex sight is the ideal sighting solution for MSR rifles, shotguns, carbines, submachine guns, and full-size handguns. The ROMEO3XL features a high transmittance red notch reflector for excellent brightness, light transmittance, and zero distortion. 3 MOA  red dot with multiple intensity settings ensure rapid target engagement under a full range of lighting conditions. The large 35mm lens offers an unparalleled field of view in an open reflex sight. High transmittance red notch reflector for excellent brightness, light transmittance, and zero distortion 3 MOA dot with multiple intensity settings for rapid target engagement under a full range of lighting conditions MOTAC (motion activated illumination system) powers up when it senses motion and powers down when it does not Side loading CR2032 battery Comes with a low-profile M1913 Picatinny mount Aircraft grade CNC alluminum housing Dependable waterproof (IPX-7) and fog proof performance Finish: Black Height: 1.4 Inches Length: 2.1 Inches Style: Reflex Weight: 1.5 Ounce Width: 1.3 Inches Magnification: 1 Adjustment Click Value: 1 MOA Warranty: Sig Sauer Electro Optics Infinite Guarantee Battery Type: CR2032 Reticle Color: Red Housing Material: Aluminum

categories:GunsSporting Goods

4876 impressions

422 views

Brand new Manufacturer: Savage Model: 20005 Caliber:  .22 Long Rifle/.17 Mach 2 Capacity:  10 Rounds  Body: Steel Spring: Heat Treated Spring Wire  Follower:  Polymer Finish: Blued Fits: Savage MKII Rifles chambered In .22 Long Rifle or .17 Mach 2 Made in Canada

categories:Guns

7650 impressions

517 views

Looking for the following: -vortex amg UH 1 gen 2 -Eotech and magnifier x5 prefered -ACOG -Elcan -$$ equivalent bulk 556/223 -110 tatical -10TR 308 -lever action rifles. You get the jyst

categories:Guns

12764 impressions

1225 views

I am a licensed and bonded contractor with a PAL and restricted PAL and I am willing and looking to do renovation work on residential and commercial projects in trade for 9mm, 5.56 and 7.62 rifles. 25 yrs experience in Renovations. Have lots of pictures of past projects. Please email or text if you are interested. Thanks

categories:GunsSporting Goods

4252 impressions

287 views

Looking for a Henry Evil Roy Frontier Carbine. Prefer 22LR but will look at the 22 Mag. https://www.henryusa.com/rifles/henry-frontier-carbine-evil-roy-edition/ Shoot me a text or give me a call if you have one that you'd like to sell.

categories:GunsSporting Goods

3461 impressions

314 views

sold

categories:Guns

2908 impressions

275 views