THANK YOU (6 in.), Sentiments series HN3124, 1st year of issue, 1991, $35 with box DIANA HN2468, (8"), 1985, $75 FLOWER OF LOVE, 1st issue, 1991-1997 HN2460, $60 SUMMER ROSE HN3309 1990, $50 Figure Of The Month MAY (5") Peggy Davies, HN3334, $40 Figure Of The Month MAY (7.5") Peggy Davies, HN2711, $55, last photo Cynthia, green dress yellow top, HN 2440, $65, last photo 1988 Figure Of The Month JUNE HN 2790, $55 ALICE, HN 3368 excellent condition, made in England, 1990, signed by Michael Doulton, $80.00 HER LADYSHIP HN 1977, was issued from 1945 to 1959, made in England, 7" tall, $65.00 NINETTE, yellow, HN 2379, $65.00 SECRET THOUGHTS, green, HN2382, $65.00 MARIE, small purple, HN1370, $30.00 COUNTRY ROSE HN 3221, 1988 Modelled by Peggy Davies, $85 MY LOVE, HN2339, $50 White Dress with rose MARGARET HN2397, $40.00, lady in a white dress and a blue ribbon around her waist DARLING HN1985, $15, boy with blanket Royal doulton flowers in a shell with box, $20

categories:CollectiblesHousehold Items

3049 impressions

512 views

WW1 Swiss Model 1914 Pioneer Sawback Sword bayonet Sawback sword bayonet for use on the 7.5 mm. Schmidt-Rubin M1911 carbine and the M1931 Short Rifle (K31). The M1914 has a swell-point blade profile, where the blade is wider at the point than at the ricasso. The 1914 blade is fullered on only one side. The right side of the blade has the initials HS stamped immediately in front of the guard for the Maker Hans Steimer With the Swiss proof mark stamped below the initials. The back of the blade has an aggressive saw blade which starts 1” in front of the guard and extends to 14” from the guard. The right side of the guard has the number 478681 stamped in it. The release button works as designed. The scabbard is in good condition with the original leather attachment strap included. This bayonet was manufactured by Paillard with their mark stamped on the end of the scabbard. Overall Length – with blade in scabbard - 25” Length of Bayonet – 23 7/8” Length of Grip including the Guard – 5” Blade Length – 19 3/4” The M1914 was issued to select troops. When equipped with K31 rifles, the M1914 bayonet was issued to: —Engineers; —Driver corporals and mounted artillery sergeants; —Blacksmiths, blacksmith private first class or lance corporal, blacksmith sergeants; —Horse transport soldiers, PFCs, corporals and sergeants; —Saddle makers; and, —Drivers for motorized field artillery, howitzers and heavy howitzers. Good Condition $400.00 Thanks, Phil

categories:GunsSporting Goods

7886 impressions

364 views

Hornady #13 shell holder Shell holder #13 fits: • 6.5 x 57mm Rimmed • 7 x 57mm Rimmed • 7 x 65mm Rimmed • 9.3 x 74mm Rimmed purchased by mistake never used pick up in nw calgary

categories:Tools and Equipment

4194 impressions

309 views

Brand New Including Flash Hider or Thread Adapter (CMMG part #57DA53A). Length:10.4″ Material: 4140 Chrome Moly Vanadium Finish: Chrome Lined Maganese Phosphate Coated Barrel Twist: 1:9 Twist Caliber:5.7×28 Chamber Thread: Threaded M12x1.0 LH Item Number: CMMG-57DF1C7

categories:GunsSporting Goods

1337 impressions

56 views

Awesome rifle bought a 7 prc and ended up not using this guy anymore. 40 rounds shot through it so nearly new. Comes with scope rail. Keeping the rings. This thing is a tack driver. Only looking for cash

categories:Sporting Goods

1172 impressions

152 views

I have the following factory ammunition for sale: 2 x rem 45-70-300 grain $45 each 1 x federal 30-30 - 170 grain $45 1 x federal fusion 308 - 180 grain $60 2 x Barnes 7mm rem mag 160 grain $140 (4 rounds short in one box) All boxes are full with the exception of one box of 7 mm ammo which is 4 rounds short. Absolutely will not ship ammo. PAL will be verified.

categories:GunsSporting Goods

7820 impressions

292 views

410 Ammo. Troy Brand. 3”&2.5” #7.5 3

categories:GunsSporting Goods

39427 impressions

1927 views

Description - 3D Printed Free Float Barrel Tray/Stiffener Plate. - Replaces stock Barrel Tray to Free Float the barrel and stiffen the forend of the stock. Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design). Specifications - Material: PLA+ (Polylactic Acid Polymer) - Finish: Black - Weight: 1.1oz (30g) - 3D Printed Fill: 100% (Solid Plastic) - 3D Printed Resolution: 0.008" (0.2mm) - **This is a 3D Printed part, it was constructed via layers of melted plastic. Minor imperfection such as layer lines and start/end seams are to be expected. The part was fully inspected and guaranteed to function as intended. See image attached** - *Screws not included. Must use original screw(s) provided by Savage or source new screws.*

categories:GunsSporting Goods

16407 impressions

494 views

Description - Thread Protector with high temperature retaining O-Ring (up to 400°F) - Friction and Compression of the O-Ring retains the Thread Protector and prevents it from loosening off *Extreme rapid discharge will result in temperature exceeding 400°F and loosen the Thread Protector Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Tracked shipping (for an additional cost) available upon request. Brand: Created by Cay (Yes it's my original design) ___________________________________ What's Included - 1x Thread Protector 1/2"x28" - 1x Viton O-Ring Thread Protector Specifications - Material: AISI 4140 Steel - Finish: Knurled Matte Black Oxide (Blued) - Weight: 0.5oz (14g) - Dimensions: OD: 0.728" (18.5mm) / Length: 0.492" (12.5mm) - Weight: 0.5oz (14g) O-Ring Specifications - Material: Viton® Fluoroelastomer Rubber - Finish: Black - Max Temperature: 400°F (204°C) - Hardness: Durometer 75A (Medium) - Dimensions: OD: 0.591" (15mm) / ID: 0.472" (12mm) / Width: 0.060" (1.5mm) - Finish: Black *5/8"x24 coming soon Instructions 1. Check and make sure the firearm is unloaded. 2. Loosen off the stock thread protector or muzzle device in the counter clockwise direction. 3. Clean the thread (if necessary). 4. Install the High Temperature O-Ring over the threaded barrel. Do not overstretch the O-Ring, light pressure is sufficient the slide the O-Ring over the threads. 5. Install the Thread Protector in the clockwise direction. 6. Note that the Thread Protector can be installed in either directions. The smooth direction facing the O-Ring for more compression/friction or the cutout direction facing the O-Ring for a flush/clean connection. ***Video Instructions Coming Soon***

categories:GunsSporting Goods

16309 impressions

565 views

Prices A- Double Tap Trigger Over Travel Limiter - $20 B - Aperture Ghost Ring Sights Set - $20 C/D - Extended Magazine Release (Right and Left Handed) - $25 **$5 off each additional part for any order combo (2 or more) **Ex. A+B=$35-($5 discount)=$30 Total **A+B+C=$20+$20+$25=$65-2*($5 discount)=$55 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) Double Tap Trigger Over Travel Limiter - $20 Replaces the Factory Trigger Spring Plunger Reduce the Over Travel by 85% for Quick and easy "Double Taps" Machined Stainless Steel Aperture Ghost Ring Sights Set - $20 Replaces the Factory Open Sights Comes in a Set of Two (Large/Small Apertures) 1x Plinking Aperture Rear Sight Plate 0.125" (3.2mm) 1x Target Aperture Rear Sight Plate 0.063" (1.6mm) Material: Precision Machined Stainless Steel Finish: Matte Black Oxide (Blued) Weight: 0.02oz (0.4g) **Not compatible with Aftermarket, Fiberoptic, TruGlo, Hiviz, or Rear Sights with the Single Screw Design. See image attached** *Screws not included. Must use original screw(s) provided by Ruger or source new screws.* Extended Magazine Release (Right and Left Handed) - $25 Replaces the Factory Magazine Release No Snag Design (Tab only on one side) Ergonomic Quick Index Finger Mag Release Compatible with the Charger Pistol Material: Precision Machined Aluminum Finish: Matte Black Anodize Weight: 0.56oz (16g) **Not compatible with older Metal Trigger Groups** **Mag Release does not fit certain aftermarket Archangel Stocks**

categories:GunsSporting Goods

52738 impressions

2289 views

Here is a post war, black, leather flare gun holder that only does it hold the flare gun but also holds extra 37.5 mm flares. See pictures for condition. Also comes with a leather shoulder strap for easy carry. Can ship anywhere, please see my other ads for rare and collectable military items.

categories:Sporting Goods

408 impressions

50 views

British WWII Fairbairn Sykes Fighting Knife with Learher Scabbard Full Length 13 Inches, Blade Length 7 Inches. Also comes with book commandoes and Rangers of World War II. Amazing for year World War II collection, Can ship anywhere, Please see my other ads for rare and collectable World War II Militaria

categories:Sporting Goods

870 impressions

51 views

Top,rugger American 6.5creedmore .new condition.older scope 800$ Middle,browning 7mm rem mag a bolt 1300$. .sold Bottom Remington 700 in7 mm rem mag ,very good condition with scope rail and open sites 1200$

categories:GunsSporting Goods

16415 impressions

2129 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

11641 impressions

520 views

1) Sako - Tikka Rear Sight - (0.56" / 9/16" C-C) - $195.00 2) Sako - Tikka - Blade Rear Sight - 1 screw - $225.00 3) Sako - Tikka - Front Sight w/ Sight Insert & Screws (1.2" / 30mm C-C) - $275.00 4) Sako Front Sight Ramp (2 screws) - without Sight Insert (0.75" C-C) - $75.00 5) Sako 85 Front Sight Hood - $85.00 6) Sako / Browning Front Sight Hood - $85.00 7) Sako AIII - Finwolf Front Sight Hood - $85.00 10) 6-48 Filler Screws (4) - Blue - $20.00 11) 6-48 Pan Head Filler Screws (4) - Blue - $20.00 12) 6-48 Filler Screws (4) - Stainless - $20.00 13) 8-40 Pan Head Filler Screws (2) - $20.00 14) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

84688 impressions

3454 views

100 count M13 links (7.62X51 NATO) These disintegrating links make great mancave ammo belts. 100 links will get you nearly a 5 feet belt. (LINKS ONLY) Local pick up only. Text or call only.

categories:GunsSporting Goods

30694 impressions

911 views

Zeiss v4 4-16x44 with ZMOA-2 Reticle, is beautiful shape. Only mounted on the gun and sighted in. Looking to change everything over to mils. Wanting to go with a nightforce nx8 ffp mil c, If you got one I can add cash on top for it. All original boxing and manuals. Magnification range: 4 to 16x Field of view: 28.5 - 7.1 feet at 100yds Objective diameter: 44 mm Eye relief: 3.5 in Illuminated reticle: Yes Reticle position: Second focal plane Parallax adjustment: 10yds - infinity Ballistic Turrets: ASV-E / CAP-W Turret adjustment increments:1/4 moa Max elevation / windage: 80 x 60 moa Tube size: 30mm Weight: 640g / 22.6oz Length: 355mm / 14in

categories:GunsSporting Goods

11660 impressions

503 views

Ruger M77 Scout (.308 Win) – Compact, Powerful, and Versatile Great all-around rifle based on the scout-rifle idea—light, handy, and built to do pretty much any job. Chambered in .308 Win with a 10-round mag. Barrel is 5/8x24 threaded and comes with the flash suppressor. Has a solid stainless bolt, Mauser-style extractor, hammer-forged barrel, and a tough laminate stock. Peep sight in the back, post in the front. Just a reliable, easy-to-run rifle ready for hunting or whatever you throw at it. Features: The forward-mounted Picatinny rail allows for the mounting of modern optics, like an intermediate eye relief scope (not included), for "both eyes open" sighting and super-fast target acquisition. Also offers a built-in, accurate sighting system with ghost ring adjustable rear aperture sight and a non-glare, protected blade front sight. Detachable box magazine with push-forward magazine release just forward of the trigger guard. Patented integral scope mounts, machined directly on the solid-steel receiver, provide a stable mounting surface for scope rings, eliminating a potential source of looseness and inaccuracy in the field (scope rings included). Soft rubber buttpad with buttpad spacers allows the rifle to be properly sized for different shooters or varying levels of outerwear or defensive gear (three 1/2" spacers included). Free-floated, cold hammer-forged barrel with ultra-precise rifling that provides exceptional accuracy, longevity, and easy cleaning. Rugged and reliable with a glass-reinforced nylon trigger guard and magazine well. Non-rotating, Mauser-type controlled round feed extractor is the most positive case extraction system ever invented, and features a fixed blade-type ejector that positively ejects the empty cases as the bolt is moved fully rearward. Developed with Gunsite, this rifle is "Gunsite Approved" and features the Gunsite name rollmarked on the receiver and engraved on the grip cap of laminate stock models. Caliber: .308 Winchester Capacity: 10 Action: Bolt Stock: Black Laminate Barrel: 16.1", Free-Float, Cold Hammer-Forged, Threaded (5/8"-24) w/ Flash Suppressor Twist: 1:10" RH Safety: Manual Thumb Sights: Adjustable Rear, Protected Blade Front Overall Length: 37" Length of Pull: 12.75" Weight: 7.1 Selling some of my rifles to fund a long range pakcage in 300 wm, 308, 6.5cm and willing to trade accordingly. Shipping availalbe and on the buyer.

categories:GunsSporting Goods

2959 impressions

214 views

If you can see this ad, the item is still available. Therefore, no need to ask, as I won't be responding. Selling a set of Firestone "Winterforce 2" 265/70 R17 115S tires mounted on 4th Gen Toyota 4Runner Sport Edition alloys. This set is fully balanced set. Mount it and you are set for the Winter. Bolt pattern is 6 x 139.7. It is up to you to verify your vehicle's bolt pattern if you are interested and it is not a 4th gen 4Runner. Look at the pictures re: details. The set has been stored and cared for inside when not used. It was used during two winter seasons and has lots of life left. I include this mobile tire rack so you can store your summer wheels properly: https://www.canadiantire.ca/en/pdp/motomaster-roll-on-tire-dolly-w-adjustable-height-300-lb-0091539p.html?rq=tire+storage Item location is Calgary NW re: pick up. This is a local cash-only (no EFT, etc.), pick-up only sale. No holds, first come, first served.

categories:Auto and TrailersAuto PartsTires and Rims

168 impressions

72 views

Specs: Magnification range: 4.5 to 14x Field of view: 4.5x - 19.9 ft / 14x - 7.4 ft @100 yd Objective Clear Aperture: 1.6 in Eye relief: 4.40 - 3.70 in Illuminated reticle: No Turret adjustment increments: .250 moa Tube size: 1 in Weight: 369g / 13 oz Length: 320 mm / 12.6 in

categories:GunsSporting Goods

3657 impressions

279 views

100 Berger 153.5gr hybrid target $60.00 100 Berger 140gr hybrid target. $60.00 Text 780-385-8444

categories:Sporting Goods

5327 impressions

491 views