Have 3 quarts and 1 pint \ of H 4831 powder. Purchased 8lbs. of powder in cardboard container and transfer to jars for proper seal containment. Jar 1- 2.824 lb., Jar 2- 2.838 lb., Jar 3- 2.786 lb. total equals 8.448 lbs. minus empty jar - .872 x 3 = 2.616 lbs. Pint - 1.826 lbs. minus empty jar - .700 lb. equals 1.126 lbs. TOTAL POWDER IS 6.958 lbs. 6.958 divided into $600.00 = $86.23 / lb.

categories:GunsSporting Goods

46515 impressions

1394 views

New, sealed and never used. 3 lbs. of 3031 powder same lot L1478.

categories:GunsSporting Goods

49244 impressions

1442 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

8500 impressions

230 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

8759 impressions

206 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

9352 impressions

560 views

Custom built metal stand to hold presses, powder measures, etc. It can be bolted or clamped to a bench or table to bring your equipment to a comfortable working height. The tubular steel is 5 inches in diameter with a 7 inch diameter base and overall height of 10 inches which has been powder coated in black. The weight is 4 lbs. 12 oz. PLEASE NOTE - the sale is for the STAND ONLY and the press is NOT INCLUDED. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.     *** PLEASE NOTE *** , I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

30099 impressions

1475 views

Alliant Reloader gun powders in numbers: #7-$30/lb and #25-$80/lb and #33-$100/lb, (2lb max per customer). pickup in Devon, no shipping.

categories:GunsSporting Goods

58668 impressions

5615 views

For Sale - Lee Precision 444 Marlin full length sizing 3 die - no crimp die included! Crimp die available in separate sale but can be added to purchase of die set for $40 more. If this ad is up then item is still available!  $90 – firm!  1 set available Brand new in box - Contains:  -full length sizing die  -expanding die  -bullet seating die  -powder scoop  -shell holder  -data, load chart, and instructions  -handy red box & Lee lubricant  EMT or cash - Remote pick up available by appointment only, house drop box or shipped at buyers expense within Canada.  Small package/tracked, all provinces - $22 (small box) via Canada Post Text or email only.  No trades or offers

categories:GunsSporting Goods

3526 impressions

143 views

If this ad is up then item is still available. For Sale - one Lee Precision 6.5 PRC full length steel sizing dies - complete set (with crimp die included) $88 – firm! 1 set available Brand new in box - new manufacture for 6.5 PRC -full length sizing die  -bullet seating die  -powder scoop  -shell holder  -data, load chart, and instructions  -handy red box & lubricant   EMT(shipped) or cash(F2F pickup) - Remote pick up available by appointment only, house drop box or shipped at buyers expense via CP within Canada only. Small package/tracked, all provinces - $22 No trades or offers

categories:GunsSporting Goods

3548 impressions

148 views

Mark7 Revolution International fully automated reloaded for sale. This is the Evolution reloader fully automated with automatic primer feed, case feeder, bullet feeder, laser powder measure, laser bullet sensor, primer orientation sensor. Fully loaded machine. The regular Revolution is not available for export from the USA, so this is the machine for the rest of the world. Used for two seasons of IPSC competition but has not been used for two years now. Comes set up for 9mm but can reload rifle calibres as well. Approximately 100,000 rounds loaded with it. Many spare parts and cover included. Replacement cost is approximately $20k USD before shipping and any tariffs that now apply.

categories:Sporting Goods

3384 impressions

273 views

Antique Copper Powder Flask Brass powder dispensing mechanism and spout, which works properly Removable brass spout Measures 6 ¾” Long and 3 ½” wide at widest portion No visible makers information The flask is missing solder on the bottom and both sides and needs to be repaired before it could be used. An interesting collector piece, sure to generate lots of conversation. There is something small inside which rattles when shaking the flask. This may be some of the missing solder or possibly small clumps of powder. $30.00 or Best Offer Thanks, Phil

categories:GunsSporting Goods

18025 impressions

543 views

Dixon & Sons Early 19th Century Copper and Brass Powder Flask Adjustable spout but missing set/stop screw Measures 7 ¾” Long and 3 ¼” wide at widest portion Original brass flask by Dixon and Sons. An uncommon flask design with a heavy copper body. This is common size flask for servicing a rifle or fowler. Seams are all-intact and the dispensing valve works correctly. Has a number of dents in body. Seams are intact. Collectible or a nice complement to your original rifle or fowler. $50.00 or Best Offer. Thanks, Phil

categories:GunsSporting Goods

15046 impressions

461 views

Alliant 23 -$150 Alliant AR-Comp -$150 IMR 4350 -$90 Varget -$110 N-105 -$170

categories:GunsSporting Goods

5018 impressions

312 views

Alliant 17 powder 1 lbs. $150 IMR 4350 powder 1 lbs. $90 Win. 748 powder 1 lbs. $110 Alliant 23 powder. SOLD IMR 7828 SSC 8 lbs. SOLD Hod. H335 1 lbs. $110. Hod. Varget 1 lbs $110. IMR 4320 1 lbs SOLD Win. 6.5 Staball 1 lbs $100 H380 1 lbs $110 IMR 4895 1 lbs. $110 BLC 2 1 lbs. $110 IMR 4064 1 lbs. $110 Primers: Remington 9 1/2 Mag. 1000 $200.

categories:GunsSporting Goods

13866 impressions

771 views

All-in-one systems boast a powder scale and dispenser with user-friendly touch-screen technology. Quickly dispenses two grains of powder per second with +⁄- 0.1-grain accuracy. Compatible with all types of smokeless powder. Auto-repeat function speeds up the process by dropping charges each time the pan is reset. Compact unit takes up 50% less space than similar models. Ambidextrous unit accommodates left- or right-handed users. Quick-drain system for easily changing powder. Anti-static technology. Universal 115/230-volt adapter. Purchased this a couple years ago and then never had the time and space to start reloading. Save a few bucks off new and upgrade your powder system today! Price is firm.

categories:GunsSporting Goods

1581 impressions

92 views

Variety of both, some boxes are flat. Price is for all.

categories:GunsSporting Goods

13520 impressions

1197 views

3 varieties of berger, all .30; Others sold! 210 grain boat tail match (79 count), 30.00 Trades considered would be towards .30 215 gr berger hunters, 6.5 156 gr Berger EOL, powder (rl15,26, h1000), primers (LR or LRM) or trades towards a Magnetospeed or similar level chronograph. Message or email with offers, worst I can say is no. Open to shipping but buyer pays shipping.

categories:GunsSporting Goods

13722 impressions

961 views

One pound RL22 for 1 pound RL26, looking to trade as I only have a pound and would rather have 3 pounds for load consistency.

categories:GunsSporting Goods

8950 impressions

379 views

1lb Hodgdon H4198 powder. Has been opened but never used. Stored properly. $100

categories:GunsSporting Goods

1018 impressions

80 views

6mm stainless cannon balls Uses black powder and cannon fuse/match Fun and unique

categories:GunsSporting Goods

1565 impressions

129 views

Never used

categories:Sporting Goods

438 impressions

54 views