Everyone’s favorite angled grip from Magpul. The Magpul AFG and AFG-2 allow for more precise manipulation of your firearm and serves as a hand stop as well as a barrier stop. Comes with hardware to mount on Picatinny rail or M-Lok depending on option selected. Visit our website to purchase - see our stocks and grips section here: https://partsonly.ca/product-category/stocks-grips/

categories:Guns

5174 impressions

639 views

The Enfield L39A1 is a British military target/match rifle developed in the late 1960s by the Royal Small Arms Factory (RSAF) Enfield. It was essentially the open-sights counterpart to the L42A1 sniper rifle (which used a telescopic sight), both built on converted Lee-Enfield No. 4 actions rechambered and rebarreled for 7.62×51mm NATO (.308 Winchester compatible). This rifles overall commission isn’t very good shape from the wood to the bore. You will not be disappointed in this precision shooting platform. Ready for your collection or the range.  Key Specifications •  Caliber: 7.62×51mm NATO (uses standard 10-round magazines, often Sterling-pattern or Enfield-specific). •  Action: Bolt-action, modified No. 4 receiver (machined for 7.62 magazine clearance, new bolt face/extractor, etc.). •  Barrel: Heavy, free-floating, 27.5 inches, hammer-forged for precision and heat resistance. •  Sights:  Fitted with adjustable aperture target sights the Parker-Hale PH5C (or PH5E4/PH4/47 variants) on the receiver— (PH·5C marking, vernier scale, knurled knobs). •  Stock: Shortened/widened fore-end, often with a standard No. 4 butt (some had high-comb target stocks in commercial versions). •  Weight/Length: Heavier than a standard No. 4 (~10–11 lbs), overall length around 44–45 inches. •  Accuracy: Excellent for its era—sub-MOA potential with good ammo (e.g., 168gr match loads). Can ship anywhere in Canada, Please see my other ads for rare and collectible, firearms and accessories. 

categories:Sporting GoodsGuns

204 impressions

31 views

Here is a bolt and receiver matching 1950  long branch precision shooting target rifle. These rifles are very collectable in the shooting community and  chambered in 7.62. Only a couple thousand of  made and are regarded as incredibly accurate rifles.   Please see picture for details on condition but overall, I would rate this as high condition or very good condition stock as well as bore.  Collectors estimate around 1,500–2,000 authentic CAL/DCRA conversions were done (some sources cite ~1,300–1,982 based on observed numbers and databases compiling photos/serial tracking). These are scarce today, especially pristine examples. Long Branch receivers (like this 1950 one) are preferred for conversions due to better tolerances/magazine fit, but British receivers (e.g., BSA, Fazakerley) were also used (sometimes requiring extra milling). This rifle’s setup (target sights, display with Canadian volunteer theme) aligns with a classic DCRA target configuration— converted 7.62 example used in DCRA events. If it has a stamped conversion number of 24 which is stamped on receiver, that would confirm an official CAL job and tie directly to this limited ~2,000-run series.  Can ship anywhere in Canada, Please see my other ads for rare and collectible, firearms and accessories

categories:Sporting GoodsGuns

280 impressions

39 views

Sadly due to age and declining health I am selling my last 338. This custom 338 Win Mag is built on a Sako L691 action, has 26 inch barrel, composite stock with palm swell, and if a bear swipes the scope off has iron sights. Comes with attached leupold vari X 2-7X33 scope and includes hollow possum bore guide and bore jags and brushes. Has fired 76 rounds doing reloading work up. Complete reloading and ammo package available separately or included as total package. Reloading package includes: Redding deluxe die set, RCBS precision mic, and Lee factory crimp die - 174 once fired casing, sized, flash hole deburred, and some have federal 215 primers, and ammo boxes - around 400 bullets from 180 to 225 grains - 6 full boxes of ammo (see pic) - my documented reloading data. Will sell the complete package above for $2500. Can sell the rifle separately for $2000 with scope, bore guide, and brushes. Can sell the reloading package and ammo for $650 (worth well north of that). Will need copy of PAL, DOB, RCMP email you use for verification, and name and address to complete sale. Cash or E transfer. Contact me via text or email. E transfer will go to my wife’s email (she handles the books).

categories:Sporting GoodsGuns

6177 impressions

428 views

The Outlander from Gear Stock is crafted with a 260mm - 3Cr13 drop point blade for exceptional strength and precision. Full tang. Nylon glass fiber handle with lanyard hole for firm grip and comfort. Matching nylon glass fiber sheath offers easy access and protection . Rigid , secure belt clip/loop designed for tactical belts, pack straps , etc. OAL: 10 inches. Blade: 5.5 inches Brand New in Box

categories:Sporting GoodsCamping and Survival Gear

3023 impressions

425 views

Prices A- Double Tap Trigger Over Travel Limiter - $20 B - Aperture Ghost Ring Sights Set - $20 C/D - Extended Magazine Release (Right and Left Handed) - $25 **$5 off each additional part for any order combo (2 or more) **Ex. A+B=$35-($5 discount)=$30 Total **A+B+C=$20+$20+$25=$65-2*($5 discount)=$55 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) Double Tap Trigger Over Travel Limiter - $20 Replaces the Factory Trigger Spring Plunger Reduce the Over Travel by 85% for Quick and easy "Double Taps" Machined Stainless Steel Aperture Ghost Ring Sights Set - $20 Replaces the Factory Open Sights Comes in a Set of Two (Large/Small Apertures) 1x Plinking Aperture Rear Sight Plate 0.125" (3.2mm) 1x Target Aperture Rear Sight Plate 0.063" (1.6mm) Material: Precision Machined Stainless Steel Finish: Matte Black Oxide (Blued) Weight: 0.02oz (0.4g) **Not compatible with Aftermarket, Fiberoptic, TruGlo, Hiviz, or Rear Sights with the Single Screw Design. See image attached** *Screws not included. Must use original screw(s) provided by Ruger or source new screws.* Extended Magazine Release (Right and Left Handed) - $25 Replaces the Factory Magazine Release No Snag Design (Tab only on one side) Ergonomic Quick Index Finger Mag Release Compatible with the Charger Pistol Material: Precision Machined Aluminum Finish: Matte Black Anodize Weight: 0.56oz (16g) **Not compatible with older Metal Trigger Groups** **Mag Release does not fit certain aftermarket Archangel Stocks**

categories:Sporting GoodsGuns

62228 impressions

2582 views

Selling a brand-new, unfired Benelli Lupo Bolt-Action Rifle chambered in .243 Winchester. This precision rifle features a 22-inch Crio-treated, free-floating barrel. The Lupo's ergonomic design includes a black synthetic stock with Benelli's Progressive Comfort recoil reduction system that offers a customizable fit with an adjustable length of pull ranging from 13.8 to 14.75 inches. It has adjustable trigger pull weight between 2.2 to 4.4 pounds. Not interested in trades, and the price is firm. A valid PAL is required and must be validated.

categories:Sporting GoodsGuns

29508 impressions

1066 views

Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g

categories:Sporting GoodsGuns

88368 impressions

2595 views

M18 7mm Rem Mag | Swarovski Z3 BT Optic | Harris & Browning Upgrades Description: Selling a premium, long-range hunting rig. This Mauser M18 in the hard-hitting 7mm Rem Mag is paired with a world-class Swarovski Z3 optic for ultimate clarity and precision. Package Highlights: Rifle: Mauser M18 with a durable black synthetic stock and soft-grip inlays. Optic: Swarovski Z3 with the Ballistic Turret (BT). Features a "quick set" system that allows you to dial for three different distances instantly. Mounting: High-quality rings on a dedicated Picatinny rail for maximum stability. Bipod: Original Harris Bi-pod for rock-solid stability in the field. Sling: Premium Browning Sling included. Condition: Excellent. Scope not sighted, but ready to go. Will Throw in the 511 carrying case for an extra $50.00

categories:Sporting GoodsGuns

4876 impressions

286 views

For sale, custom silhouette rifle with Remington 700 action, H-S Precision 24 inch heavy stainless steel barrel, Canjar trigger, fibreglass thumb hole stock. A box of bullets as seen in pictures. There are a couple chips in the stock no dents. The rifle and scope are in excellent condition. OBO

categories:Sporting GoodsGuns

4796 impressions

360 views

The Glock Field Knife FM81 is a rugged and reliable tool designed for outdoor enthusiasts, survivalists, and tactical professionals. Built with precision and durability in mind, the FM81 excels in harsh environments, making it a trusted companion for any adventure. We carry these in Black, Green, Flat Dark Earth (brown), and Grey. https://partsonly.ca/?s=glock+knife&post_type=product Please head to the link above to view stock status or make a purchase. You can reach out directly to info@partsonly.ca with any questions. All major credit cards accepted, e-transfer accepted.

categories:Sporting GoodsCamping and Survival Gear

4688 impressions

534 views

Calm under pressure, yet deft and precise, the Fuse is an entirely different kind of hardtail. Featuring an all-new longer, lower, and rowdier chassis and 27.5x2.3 wheels and tires, the Fuse 27.5 handles rough, sketchy descents and steep, technical climbs with absolute confidence. - 130-millimeters of suspension courtesy of an X-Fusion fork. - Highlights include hydraulic disc brakes, a dropper post, and single-ring drivetrain. - Durable 29mm internal width alloy wheelset. retail price 1600 I used twice after that its stock in my storage, never been used busy at work. few scratches paint

categories:Sporting GoodsBicycles

1016 impressions

500 views

Gun is new in box. 243 Win Savage Axis II Compact Kryptek Obscura 20" Barrel 4-Rounds The .243 Winchester is a versatile cartridge that's good for small to medium game. It's accurate, has low recoil, and is a good choice for young hunters. However, it's not recommended for big game like elk, bears, and large hogs. The Savage Axis II Compact in .243 Win is a reliable bolt-action rifle known for its precision and compact design. This rifle features a 20-inch carbon steel barrel with a matte coyote tan finish and a 4-round magazine capacity. The overall length of the rifle is 39.5 inches, and it is designed for right-handed shooters. The rifle boasts a Kryptek Obscura Transitional synthetic stock, combining durability with a distinctive look.

categories:Sporting GoodsGuns

14274 impressions

767 views

New in box 6.5 prc Sauer 100 Cherokee. 5+1 round. The 6.5 Precision Rifle Cartridge (PRC) is a rifle cartridge designed for accuracy, extended range, and flat trajectory. It's a compact cartridge that's used for hunting and has been used to hunt elk, deer, bear, and antelope PREMIUM COMES STANDARD • CERAKOTE coating on barrel, action and bolt knob • Neutral cast for both left- and right-handed shooters • Cold hammer-forged SAUER barrel • Three-position safety • 60-degree bolt lift • EVER REST action bedding • Trigger adjustable from 2.2 – 4.2 lbs • Double-stack magazine • 5+1 round capacity in standard calibers • Suitable for the SAUER HEXALOCK mount • Ultra-rugged MAX synthetic stock • Barrel length: standard 22”, magnum 24” • Taper: standard 0.67“ • Muzzle thread: optional M15 x 1

categories:Sporting GoodsGuns

13586 impressions

559 views

Changing things around, cleaning up my stock pile, up for grabs today is my Athlon Ares ETR UHD 1-10 LPVO Almost Brand new (Mounted it, just sitting in Rings) Asking $1000, Comes with Vtx scope Caps, (also with OEM caps) & a Throw lever & it is sitting in an AERO Precision Uni Mount Shipping is on the buyer, No pal required. Deposits are nonrefundable & Valid for 14days.

categories:Sporting GoodsGuns

5065 impressions

624 views

Custom built RKS 1:7.5 LH gain twist heavy varmint barrel with blue chip precision brake mated to a Cadex Shepherd action with 4 lug bolt, DX2 Evo convertible double stage trigger, Atlas Worxs bottom metal, all aluminum pillar and glass bedded into a Nordic Wolf GRS stock. C/w Mounted Nikon scope (details in picture). Extremely accurate with only 1 box down the barrel.

categories:Sporting GoodsGuns

17432 impressions

1395 views

6.5 prc Winchester XPR with a mounted Zeiss Conquest v4 scope, 4-16X44 less than 100 shots Included: 3 boxes of ammo Carrying case Bipod Shoulder strap Scope: 4x zoom range • 90% light transmission • ZEISS T* coating is a guarantee of the brilliant, high-contrast images • Tested by exposure to rapid temperature shocks Rifle: Permacote FDE metal finish • Solid steel receiver • Free-floated barrel • M.O.A. Trigger system • 3 locking lugs • Short 60° bolt lift • 2-position thumb safety • Inflex Technology Recoil Pad The Winchester® XPR™ Hunter Bolt-Action Rifle combines proven concepts from Winchester's time-tested Model 70 with modern manufacturing processes and materials to produce a great hunting rifle at an affordable price. This XPR Hunter package comes with a composite stock, featuring full TrueTimber® Strata® camo, and a Permacote® FDE finished barrel and receiver. TrueTimber Strata is an excellent all-purpose camo pattern that blends into nearly any environment at any distance. An innovative Inflex Technology Recoil Pad absorbs recoil considerably. A factory-mounted and bore sighted Vortex Crossfire II 3-9x40mm scope, with a BDC reticle, allows you to obtain the rifle's true accuracy potential. Precision accuracy is ensured with a solid steel receiver that sits solidly in the polymer stock with a cross-mounted recoil lug, and a free-floated, target-crowned barrel. The XPR uses a newly designed M.O.A. Trigger system that's adjustable for both over-travel and pull weight. The bolt on the XPR has 3 locking lugs with a short 60-degree lift. The Winchester XPR Hunter bolt-action rifle has a 2-position thumb safety that locks the bolt when engaged. The bolt can also be cycled when the safety is engaged by using the bolt release button. A cocking indicator on the bolt shroud can be seen or felt by the user to know if the rifle is cocked and ready to fire. A detachable, single-stack magazine facilitates loading and unloading the rifle.

categories:Sporting GoodsGuns

15515 impressions

1022 views

Has been a fun gun to shot. Great for long range and never failed on a hunt. Defiance action in 7mm wsm with a long shot precision barrel that is fluted can you reduce some weight. There is a 10° break installed, which relieves almost all kick. It all rests in the McMillan stock with adjustable, cheek rest. For optics it is an nightforce NXS 5.5-22x50 scope. Some brass for reloading will be included

categories:Sporting GoodsGuns

18928 impressions

1686 views

Selling my 308 it has a trigger tech trigger and magpul stock pack as well as magpul detachable 5 round mag , bolt was retimed at e&m precision, rifle has roughly 600 rounds through it now

categories:Sporting GoodsGuns

25352 impressions

2361 views

I'm relocating, and this is one of the last builds I'm selling. This build has not been fired and hasn't been out of the house. Rifle: Savage Model 12 Short Action Caliber: 6.5 Creedmoor - 26" Heavy Barrel Chassis: MDT XRS + Vertical Grip — Have original stock for the rifle included. Mags: 1x Metal MDT Mag & 1x Polymer MDT Mag Scope: Vortex Strike Eagle 5-25x56 FFP Mount: Vortex Precision Extended Cantilever Mount on MDT 20 MOA Picatinny Scope Base Bipod: Magul Bipod Bag: Range Maxx Two Gun Bag Ammo: I'll throw in 60 rounds for whoever purchases this. No low ballers. Will need Pal in order to purchase. I can sell without the scope if needed too.

categories:Sporting GoodsGuns

20810 impressions

1772 views