Alberta Buy and Sell / Heavy Barrel Rifle

Browse the latest buy and sell ads across Alberta
Photo of Anschutz MPR 64 22LR, EP5 5-25x56 Rifle Scope
$2700
Anschutz MPR 64 22LR, EP5 5-25x56 Rifle Scope
Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g
categories:Sporting GoodsGuns
87759 impressions
2574 views
Calgary, AB23 hours ago
Photo of Great Deal! Savage 10 Law Enforcement Edition for sale
$1600
Great Deal! Savage 10 Law Enforcement Edition for sale
Hello everyone. I have for sale a Savage 10 Law Enforcement Edition in .308 that has been my go-to hunting rifle for the last 3 years. It has a cheek riser, directional muzzle break, 24 in heavy fluted barrel, 20 MOA rail, long range scope with heavy duty hand lapped rings, 2 proprietary Savage magazines,an extra rubber butt pad to reduce recoil even more, 3 position safety and tactical bolt knob. The stock is with the bedded aluminum chassis for rigidity and precision. The AccuTrigger is adjusted at 2 lb. This is a very very accurate rifle. Here are some bullets tested with a 3 shot group at 100 yards: Sako powerhead blade 162 gr - 0.4 in Herters soft point 150 gr -0.45 in Federal berger hybrid hunter 168 gr - 0.48 in Sellier & Bellot soft point 180 gr - 0.48 in Norma soft point 150 gr - 0.74 in Sako superhammerhead 180 gr - 0.8 in Did load development for it with Barnes TTSX 130 gr and obtained 0.35 in at 100 yards . The scope is a SKW Optics 5x30x56 FFP in 0.5 MIL/click. The scope is high quality and tracks well. It s a 34 mm tube with lots of internal adjustment. It comes with everything already done and researched. You don t have to do anything.The rifle was $900 ,scope was $700 muzzle break $100 ,butt stock pad $40, scope rings $100,scope rings handlapping $50, extra magazine $100,trigger adjustment $50. The rifle is ready to shoot. Doesn't need anything. About 300 rounds through it. Currently sighted at 300 yards. Sold as a package since the scope rings are hand lapped for this rifle. No lowballers. Gun case not sold with the rifle. Willing to ship at owner's expense about $70. Thanks 
categories:Sporting GoodsGuns
38662 impressions
1615 views
Calgary, AB2 years ago
Photo of Ultralight Arms Model 20 Rimfire Left Hand
$3000
Ultralight Arms Model 20 Rimfire Left Hand
This rifle was purchased and imported by me in 2010. I’m the original owner. This is a left hand bolt action .22lr, magazine fed 5 shot repeater. It has a 24” #3 Douglas barrel,OD green Kevlar stock w/cheekpiece. There are a total of 3-5 shot magazines plus one that needs work to function properly. I’ve ruined enough mags to know better than to try to fix it myself. The barrelled action was a satin finish that’s been Ceracoated. It has a Timney trigger and a Talley picatinny 0 degree rail, also two sets of different height 1” ULA proprietary rings also made by Talley. Includes two EB Rifleman 2.8-9X40 green anodized scopes with P4 reticle and target turrets, a wood M40 style stock that has a pillar bedded action and free floated barrel. The Kevlar stock is full length bedded including the barrel. Speaking of the barrel, it’s a 24” chrome/moly not stainless and it’s 0.660” at the muzzle, so it’s heavier than a standard barrel but it’s not as heavy as a varmint weight barrel. It’s for sale because I’m not going to make good use of it at my age. It’s only going to waste in the gun safe. Once again it is a left hand action. Condition and performance? Condition is Excellent and can it shoot? Absolutely. It’s not picky about ammo. Will shoot most standard velocity well, never tried high velocity and absolutely no Stingers. I believe they’ll cause problems due to the type of chamber. Besides, if you use Stingers you don’t need this type of rifle. If you have any other questions or need more photos, let me know.
categories:Sporting GoodsGuns
14827 impressions
786 views
Edmonton, AB7 months ago
Photo of ANTIQUE (no PAL) Compact RARE Galand 7mm / .32 Smith & Wesson Short Model 1868 Revolver
$1650
ANTIQUE (no PAL) Compact RARE Galand 7mm / .32 Smith & Wesson Short Model 1868 Revolver
This is a functional scarce and unique Antique Galand Model 1868 single and double action Revolver. Designed for 7 mm Perrin which gives it antique status, this revolver happens to accept the nearly identical .32 S&W short cartridge which can be reloaded at a low cost, and can even be made from cut down .32 S&W Long brass. There are very few antiques that will accept this caliber, so this is a lucky find. Unlike most antiques which are big and heavy, this is a small frame and compact revolver which still shoots a reliable round. Overall length is 7 inches. Mechanics are fair, with a working action in both single and double action. The hammer is strong and indexing is reliable. The rifling is still strongly defined down the 3" barrel, with evenly scattered patches of inactive oxidation from black powder use. The Galand patented mechanism involves a very unique lever which pulls the barrel and cylinder straight forward while ejecting spent shells. All components of this work fine. As a revolver that's a century and a half old, some wear and wiggle is evident in the lever and hinge mechanism, but it still works consistently and properly. Visually this revolver has an even gray/blue surface with some bits of lustre showing beyond the aged patina. No significant pitting is evident, though scattered dings and scratches are present. The grips are solid, with the left one showing an old crack that could be pretty easily stabilized and closed back up. No PAL, 18+ Ships Canada Check my ads for more antiques. I make no claims about the safety of shooting ANY antique! Check with a gunsmith.
categories:Sporting GoodsGuns
15999 impressions
919 views
Calgary, AB6 months ago
Showing 21 of 48 records