Brand new Non-restricted Caliber: 300 Win Mag Capacity: 2+1 Bolt Action Barrel length: 620 mm Twist-Rate: 1:11" Weight: 3.450 kg Overall length: 1125 mm ERGO LUX stock in Grade 2 figured walnut Aviation-grade high-alloy aluminum receiver Perfectly placed ergonomic manual cocking slide on the bolt shroud Easily replaceable bolt head makes switching from Standard to Magnum calibers a snap Twin ejectors for a precisely perpendicular ejection pattern 6-lug bolt locks directly into the barrel Jeweled bolt body SAUER Quattro trigger with choice of four trigger pull weights: 550 g (1.2 lbs), 750 g (1.7 lbs), 1000 g (2.2 lbs) and 1250 g (2.7 lbs) Infinitely adjustable trigger blade with 8 mm (0.3 in) adjustment range for length of pull and a left-to-right swivel range of 5 degrees SAUER Universal Mount (SUM) integral to with receiver for an extremely low build height SAUER universal key (SUS) integrated into the front sling swivel for forend and buttstock removal, barrel removal or replacement, and selection of trigger pull weight MagLock magazine safety Made in Germany Not interested in trade Thanks

categories:Sporting GoodsGuns

31939 impressions

3087 views

The shell casing is real brass (once fired) but the bullet is plastic that I 3D printed. $10 for 10 pieces in a carrier I also 3D printed. Colours may vary based on what plastic I have on hand.

categories:Sporting GoodsGuns

7397 impressions

959 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

4383 impressions

510 views

Brand new Snap-on Harmonic Balancer Puller set Never been used, still in box

categories:Tools and Equipment

4504 impressions

737 views

Snap-on 3/8" Impact socket set 11 sockets1/2"- 1 1/4" 1 swivel socket 3 extensions Very good condition Most sockets never used

categories:Tools and Equipment

9705 impressions

1297 views

Snap-on Ratchet wrench set 5 wrenches 1/4"-13/16" Next to new condition

categories:Tools and Equipment

4283 impressions

733 views

Vernier Dial caliper Brand new, still in case 0"-6"

categories:Tools and Equipment

5100 impressions

643 views

Snap-on Tap and Die set 43 Piece set Brand new still in original case

categories:Tools and Equipment

5928 impressions

733 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2979 impressions

526 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2939 impressions

436 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

3271 impressions

552 views

Winchester Model 1894 38-55 Ref #1040 This Winchester is a lever action, sporting rifle, octagon barrel, full mag. Dated 1895 Stock is very good – good. Small tang crack 1” long, and a minor chip gone at tang. Forearm has an app. 2” crack and a few very minor cracks. The stock has typical bang marks. Finish appears original or period correct. Original metal recoil pad fits well. Barrel is 26” long with sights intact, rear sight may have been replaced at one time, again period correct. Bore has black powder corrosion but it’s clean now and has rifling top to bottom. Bluing appears original and app. 75-85% throughout. There are bumps and scratches on metal and evidence of minor surface rusting. Screws have been used, but in very good shape. The lever functions well, safety checks out and the trigger pull, and drop are good. Firing pin is evident and protrudes when pushed on. Ejector is intact and tight, and magazine follower functions correctly. Overall, I grade this firearm as very good and should be fully functional. I did not test with snap caps or fire. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations

categories:Sporting GoodsGuns

25284 impressions

919 views

Winchester Model 1895 30-40 Krag Ref #1047 This Winchester is a lever action, sporting rifle, round barrel, shotgun style rear stock. Dated 1903. Stock is in good shape, forend has a few chips missing next to metal, the rear stock is excellent, finish is period correct. Original metal recoil pad fits well. Barrel is 28” long with period sights intact. Bore is nice and clean with minimal to no corrosion, excellent rifling top to bottom. Bluing appears original and app. 20% throughout. There are very few minor scratches on metal. Screws are mostly unused, one does appear to have seen a screwdriver but is in very good shape. The lever functions well, safety checks out and the trigger pull, and drop are good. Firing pin is evident. Ejector is intact and tight, and magazine follower is correct. Overall, I grade this firearm as very good and should be fully functional. I did not test with snap caps or fire. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations

categories:Sporting GoodsGuns

20217 impressions

821 views

snap-on closing panels for Petsafe Extreme Weather Pet Door, size large, condition new, material plastic, four available

categories:Pets and Animals

564 impressions

325 views

Winchester Model 1894 Ref #1041. Early five digit serial number. Dated 1897. This Winchester is a lever action, sporting rifle, octagon barrel, full mag. Dated 1897 Stock is excellent, appears original. A few marks. Original metal recoil pad fits well. Barrel is 26” long with sights intact. The read sights are intact and appear original. Bore is very nice, no obvious corrosion, does not appear to have ever seen black powder. Rifling throughout. Bluing is 40-50%. There are bumps and scratches on metal expected on a plus 125-year-old firearm. The drivers side receiver has a few light scratches and bangs. Screws have been used but are still usable. There is one on the loading port side that may have been a replacement. The lever functions well, safety checks out and the trigger pull, and drop are good. Firing pin is evident and protrudes when pushed on. Ejector is intact and tight, and magazine follower functions correctly.  Overall, I grade this firearm as good and should be fully functional. I don’t see many from this time frame with bores looking this good. I did not test with snap caps or fire. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations

categories:Sporting GoodsGuns

18745 impressions

1297 views

Crownline 200 LS Razor 20' 6" long 8’ 6” beam (Wide) Razor graphics package. Wake tower with built in Bimini and (board racks not currently on but will come with it). Mercruiser 350 Mag MPI 300 HP with Alpha 1 leg. Mercury High Five 5 blade prop also comes with 2 spare aluminum 4 blade props. Sony stereo system with Sirius satellite radio and CD deck, also has MP3 port Extended swim platform - ladder off of front and rear of boat. EZ Loader tandem axle trailer. Snap in removable carpets like new, have never been used in the boat. Large sun pad over engine compartment. Low hours only 190 Hours Professionally serviced and winterized each year. Second owner, have owner since 2010. Trim button on rear Dual batteries with selector switch Pop up mooring cleats Asking $27,500 OBO

categories:Sporting GoodsBoats

4601 impressions

483 views

Here is a Canadian/British origin and the C broad arrow marking), and cross-referencing the images (including the faint stamping that reads “Z.L.&T. LTD 1940” along with the C broad arrow symbol), this is an original Canadian WWII Pattern 1937 (P37) web pistol holster. Features •  Khaki/tan heavy cotton canvas construction, typical of British/Commonwealth web gear from the era to save on leather due to wartime shortages. •  Flap closure with brass snap (often called a “lift-the-dot” fastener in some variants). •  Brass or metal belt hanger and loops on the back for attachment to P37 web belts or pistol belts. •  Angled design for right-side hip carry, with a reinforced muzzle end. •  Markings: “Z.L.&T. LTD 1940” refers to the manufacturer Zephyr Looms & Textiles Ltd. (Toronto, Canada), a known WWII contractor for Canadian military gear. The “C broad arrow” (often stylized as C↑ or C with an arrow inside) is the Canadian government property/acceptance mark, indicating it was issued for Canadian forces (part of the British Commonwealth system, where the broad arrow denotes ordnance property, and the “C” specifies Canada). This holster was designed primarily for revolvers like the Webley Mk IV .455 or Enfield No. 2 .38, which were standard for Canadian troops early in WWII. However, similar P37 holsters were also used or adapted for the Canadian-made Inglis Browning Hi-Power 9mm pistol (produced from 1944 onward). Original Canadian WWII P37 canvas holsters in good used condition (like this one, with intact hardware and no major tears) typically sell for $150–$350 on sites like eBay, GunsInternational, or militaria forums/auctions. Factors influencing price include: Rarity of the early 1940 date (pre-U.S. entry into the war, during the British Commonwealth’s initial buildup). Clear markings (the C broad arrow and manufacturer stamp add provenance). Condition: This appears solid but field-used, so more toward the $200–$300 range. Recent comparable sales include similar Z.L.&T. Ltd.-made holsters from 1943–1945 fetching $200–$300. Can ship anywhere in Canada Please see my other ads for collectable military accessories.

categories:Sporting GoodsGuns

17802 impressions

346 views

Here is a Canadian/British origin and the C broad arrow marking), and cross-referencing the images (including the faint stamping that reads “Z.L.&T. LTD 1943” along with the C broad arrow symbol), this is an original Canadian WWII Pattern 1937 (P37) web pistol holster. Features •  Khaki/tan heavy cotton canvas construction, typical of British/Commonwealth web gear from the era to save on leather due to wartime shortages. •  Flap closure with brass snap (often called a “lift-the-dot” fastener in some variants). •  Brass or metal belt hanger and loops on the back for attachment to P37 web belts or pistol belts. •  Angled design for right-side hip carry, with a reinforced muzzle end. •  Markings: “Z.L.&T. LTD 1943” refers to the manufacturer Zephyr Looms & Textiles Ltd. (Toronto, Canada), a known WWII contractor for Canadian military gear. The “C broad arrow” (often stylized as C↑ or C with an arrow inside) is the Canadian government property/acceptance mark, indicating it was issued for Canadian forces (part of the British Commonwealth system, where the broad arrow denotes ordnance property, and the “C” specifies Canada). This holster was designed primarily for revolvers like the Webley Mk IV .455 or Enfield No. 2 .38, which were standard for Canadian troops early in WWII. However, similar P37 holsters were also used or adapted for the Canadian-made Inglis Browning Hi-Power 9mm pistol (produced from 1944 onward). Original Canadian WWII P37 canvas holsters in good used condition (like this one, with intact hardware and no major tears) typically sell for $150–$350 on sites like eBay, GunsInternational, or militaria forums/auctions. Factors influencing price include: Invasion date1943 date (pre-U.S. entry into the war, during the British Commonwealth’s initial buildup). Clear markings (the C broad arrow and manufacturer stamp add provenance). Condition: This appears solid but field-used, so more toward the $200–$300 range. Recent comparable sales include similar Z.L.&T. Ltd.-made holsters from 1943–1945 fetching $200–$300. Can ship anywhere in Canada Please see my other ads for collectable military accessories.

categories:Sporting Goods

3915 impressions

191 views

RedHead® Men's Silent Stalker Elite Parka Used 3 times on the tree stand, like new. "Real Tree" Camo. Size 3XLT • BONE-DRY 100% waterproof/windproof/breathable protection • Zip-out liner Shell: • Zip chest pocket • Zip handwarmer pockets • 2 bellows cargo pockets with snap-down storm flaps • Full-zip front with snap storm flap • Cinch waist Liner: • Zip handwarmer pockets with fleece lining • Cinch waist • Full-zip front • Quilted lining • Thermolite Micro Insulation: 200-gram in torso, 150-gram in sleeves The RedHead® Men's Silent Stalker Elite Parka is ready for the coldest hunts, thanks to Thermolite® Micro Insulation — 200-gram in the torso, 150-gram in the sleeves — along with the famous BONE-DRY® 100% waterproof/windproof/breathable protection in the shell and the zip-out liner. Unlike ordinary liners that do little to nothing, ours has the same enhancements as the shell, in a lighter frame, perfect for warmer days or cooling off. The shell of this RedHead hunting parka features a removable hood and includes two bellows cargo pockets with snap-down storm flaps, a zippered chest pocket, two zippered handwarmer pockets with a fleece lining, a full-zip front with a snap-down storm flap, and a cinch waist. The liner inside the RedHead Silent Stalker Elite Parka features zippered handwarmer pockets with a fleece lining, a quilted interior, a full-zip front, and a cinchable waist. Fabric: 100% polyester

categories:Household ItemsClothing and Apparel

924 impressions

251 views

For sale is a Strikefire II red dot system from Vortex optics. This sight features a 30mm tube design, providing a larger field of view and the ability to conveniently mount it at any height using common 30mm rings. It has a 4 MOA dot that is easy to acquire quickly, and is switchable between red / green. There are 10 adjustable brightness settings, chosen with the rear facing controls. The last chosen level is where the unit powers up to. The included cantilever mount is ideal for AR platforms, as it places the optics bore center 40mm above the base surface. Although it is not limited to AR's, this versatile sight will work just as well across countless other applications that require rapid target acquisition. Shockproof construction with a high recoil rating, due to its robust design, making it ideal for a long list of calibres. Waterproof and fog-proof, thanks to nitrogen gas purging. Includes flip-up lens covers, and a cantilever ring mount. This sight is not brand new, but it's in great shape, and was well taken care of. Every aspect of it functions like it should, right off the shelf. If used optics are a concerning area to you,fear not, as this sight is covered by the industry leading VIP Unconditional Lifetime Warranty from Vortex. I have also got a pair of rail mounted, offset, folding BUIS (back up iron sights), which serve as a great last resort, in the event the battery dies on the sight. These are definitely better suited for a long, flat top rail as opposed to a short section on top of a shotgun. They sit on a 45° axis when deployed, have 2 options for the adjustable rear sight ring size, and an adjustable front pin height. The springs are very strong in these, and they firmly snap into position at the push of a button. Asking $225 for the red dot alone, or $275 including the BUIS. Located near Hardisty, AB Can ship at buyers expense, quote available upon request. Will be right around $25 within Alberta.

categories:Sporting GoodsGuns

3551 impressions

273 views

I am downsizing, so up is my prized antique Colt revolver in 45 acp. This gun is dated 1876 as per the low serial number. It was refinished some time in its past life. It has a new barrel, comes with brand new internals and screws. All original parts are included, or at least all the parts that came with the gun when I got it. It also comes with an additional 455 Webley cylinder. This gun was tuned by Rusty wood trading company and has a roughly 2 lb butter smooth trigger pull. The only issue with the gun is the one piece grips don't perfectly fit, so there is some mild overlap on the bottom of the frame as seen in the pictures. Otherwise it is in perfect condition. All four clicks are present on the hammer notches. I am also including some extra goodies. I am including a silicone gun sock, a brand new 45acp classic lee loader listed in another ad, bunch of snap caps, an extra set of two piece wood grips that I was working on trying to fit to the frame, a couple sticks of dragon black powder bullet lube, and a one size fits all nylon holster. This is being sold as a package, no piecemeal. I am now willing to ship through Canada Post using their prepaid boxes. I will get the maximum amount of Insurance they offer and signature required will be included. Not looking for trades but will accept non-refundable payment plans over a reasonable period of time. Cash or EMT only.  ***It should be self-explanatory but do not use factory 45 ACP ammunition in this gun due to the antique iron frame! Lead and black powder only to preserve this history piece please.***

categories:Sporting GoodsGuns

1312 impressions

233 views