Remington Model 580 Single Shot Smooth Bore (1967) - 22 Rimfire Shot Shell, 24" Barrel, Bolt Action, Original Bead Sight. . Model 580 Single Shot Rifles had a total production of 60,0000 Rifles (1967 - 1977) - Only 3000 were made as Smooth Bore. . $750.00 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:GunsSporting Goods

12918 impressions

401 views

1) Winchester Post 64 M94 - Rear Sporting Leaf Sight w/ Elevator - $170.00 2) Winchester Post 64 M94 - Elevator for Rear Sight - $50.00 3) Winchester Post 64 M94 - Front Sight Silver Beaded Insert - 80.00 4) Winchester Post 64 M94 - Front Sight Hood - $40.00 5) 6) Winchester Post 64 M94 - Finger Lever Pin Stop Screw - $40.00 7) Winchester Post 64 M94 - Link Pin Stop screw - $35.00 10) Winchester Post 64 M94 SRC Front Band Screw - 40.00 11) DT-1 Marble's 3/8" Dovetail - Curved Top - $45.00 12) 6-48 Filler Screws (2) - Blue - $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

70281 impressions

2732 views

Hand Stop and 3 pt Sling Swivels - Winchester Marksman Target Rifle - Models 52 - 70 - 75 Excellent Condition $100.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

50489 impressions

856 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

12396 impressions

436 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

19898 impressions

731 views

Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

12318 impressions

375 views

Remington Model 788 30-30 Win Magazine. Shipping is only available on buyers expense. It would be an additional $20 flat rate. Price is firm.

categories:GunsSporting Goods

34934 impressions

1877 views

Pioneer water pump Model: SC88S12L71-EO311 Year: 2011 Hours: 7637 Engine: John Deere 4045T 10 inch suction 8 inch discharge Flow rate: 4500 USgpm / 1040m3/H Head max height: 200 Feet / 60 Meters Handling: 3 inch solids Good running condition Silent enclosed box Finance / Leasing and shipping can be arranged PLUS GST OBO TAGS: JLG , Genie , Caterpillar , D9 , Hitachi , Kubota, Doosan, Wacker neuson , John deere , Isuzu , Bobcat, Grader , 140G , Komatsu , Bell , 140H , DOZER , CAT, JLG , Genie , Caterpillar , D9, D9T , D6 , Hitachi , Kubota, Doosan, Wacker neuson , John deere , Isuzu , Bobcat , Bomag , Hamm , Skyjack Backup power, Standby generator ,Construction, generator, Light plant, Light tower Wacker , Mq, Multiquip , Terex, Caterpillar , Cummins ,Isuzu, Genrac, IR, Honda, Yamaha , Mitsubishi ,John Deere, Gold mining

categories:Tools and Equipment

591 impressions

73 views

Cal: .455 Webley Finish: Finish is grey Mechanics: Functions well in both single and double action. Bore: Bore on the 6” barrel is dark with sharp lands and a small amount of freckling. Stock: Grip is in nice condition, possibly a replacement. This model was used by the northwest mounted police. Price includes shipping. Will come with an RCMP FRT report with this guns serial number showing status.

categories:GunsSporting Goods

18098 impressions

705 views

For sale is my old faithful .45/90 WCF, model 1886. I’ve owned it for over 40 years! Built in 1892. It is a bare bones, plain Jane rifle, bought to shoot. I added a peep site to it, and it shoots as well as I can. Fair warning, it kicks! Come and see it…its a solid work horse. Asking $2000, obo.

categories:GunsSporting Goods

2804 impressions

380 views

Winchester model 1912 20 gauge full pump shotgun S/n 788 Ask g 2500.00 obo Very good shape

categories:GunsSporting Goods

6936 impressions

491 views

If you are looking for a reliable, sturdy, and protective holster for your collectible handguns, I can help. Don't go out into the bush or backcountry without a way to protect and safeguard your valuables! I have hand-made and custom fit holsters that work the following models, and more. Webley Mk 1-6, Webley WG, Smith & Wesson no. 3 variants, French MAS 1873 and 1874 models, Reichsrevolvers, Colt 1877 Thunderer, Colt 1878, Small and large frame Nagant types, Bodeo, Remington and Colt Cap & Ball Revolvers. Inquire with your model information and I'll do my best to match you with something that fits to your liking or money back after return. Prices range from $75-$150 I also have scarce period accurate Japanese Service Type 26 Shaped Top "Ham holsters" with removable shoulder strap and 12 round ammo pouch Designed for Japanese Type 26 revolver in 9mm/.38 cal And German Service Reichsrevolver M/1883 Holsters with 12 round ammo pouch designed for Reichsrevolver Model 1883 10.55 mm/.44 Russian Ships Canada wide. I don't like drama, and offer a money back guarantee of satisfaction.

categories:GunsSporting Goods

14488 impressions

567 views

Selling to get some cash flow, this is an antique, all matching and fully operational Smith & Wesson top break double action new model #3 revolver. These were the first double action guns ever made by S&W, driven by demand to increase rapid performance at close quarters while still having the choice to shoot with more accuracy in single action. These were mostly chambered in the popular .44 Russian round. These can be purchased in cowboy loads from myself as part of the deal, found online, or easily reloaded with .44 russian, magnum, or special brass. As an antique, this handgun requires no licensing or registration to buy or own in Canada. Do your own legal research! This gun is serial number 35XXX, dating its manufacture to the late 1880s. As a nearly 140 year old gun, the mechanical condition is strong, with all three positions of the hammer exactly as desired and both single and double action trigger pulls nice and light. Indexing is reliable with a lockup of both the cylinder and the top break hatch having less than 1mm wiggle room. The original hard black grips are still sturdy and nice. The 6 inch barrel on this bad boy still has loads of accurate lead to deliver. Ejector functions perfectly. Visually, the overall look is a peppered patina. Very little of the original nickel remains, with a mottled "in the white" surface being most dominant. No severe or active oxidation can be found. All of the two line address and patent info are clearly visible on the top strap, with the S&W stylized logo featured strongly on the right side. An dependable example from a world renowned manufacturer. No PAL, must be 18 Ships Canada Comes with digital FRT report Check my ads for more antiques! I make no claims about the safety of firing ANY antique gun. Check with a gunsmith!

categories:GunsSporting Goods

13142 impressions

942 views

For sale is my a mechanically great, all matching, 1880 production short barrel "Shopkeeper" Colt Thunderer in .41 LC. Selling because cash is tight. As an Antique, this handgun is exempt from Canadian licensing and registration requirements, and can be used anywhere a nonrestricted firearm would be legal. Black powder or light load smokeless .41 Long Colt rounds can be purchased online or worked into deal. The 1877 line of revolvers was Colt's first double action model ever produced. They made almost 170,000 from 1877 to 1909 with three main designations: the Colt "Lightning" in .38 LC, the "Thunderer" in .41 LC, and the "Rainmaker" in .32. However, due to Canada's laws, only the .41 caliber ones are designated as "antique". This is luckily one of those guns, and it needs no registration or licensing to own. These models are highly collectible handguns, particularly the short barrelled "Shopkeeper" model due to its easy to stow nature. Arizona Wild West gunslinger Doc Holiday carried one of these. This particular example, SN 22261, was produced rather early in 1880 and has a short but accurate 3.5" barrel. All parts match, and the exterior retains an excellent 85% of the original nickel. The internal mechanics are incredibly clean and original. The bore is fair with strong defined rifling. Grips are nice like-new repros with rampaging Colt medallions. All hammer clicks are present, lockup is rock solid, and the trigger pull is pleasant in both SA and DA. The barrel is stamped with the Hartford Connecticut Colt address and the acid etched "COLT D.A. 41" is still visible. The left side of the frame displays the 3 line 1871, 1874, and 1875 patents. It reads "41 CAL" on the trigger guard. Can work ammo into deal with PAL No PAL required for revolver Must be 18 Comes with FRT page Ships within Canada Check out my profile for more antique handguns! I make no claims about the safety of firing ANY Antique firearm. Consult with a gunsmith first.

categories:GunsSporting Goods

17811 impressions

1228 views

Mongoose Mayhem MX biker Model 04M088

categories:BicyclesSporting Goods

2376 impressions

312 views

-Model 6088, sells for $449 on Amazon.ca -portable handle design . Beautiful and Functional Injection Molded. Durable use with the solide construction. -Customized Fit Foam -Inside:According to your size of valueds size, configure the interior foam to fit and keep from the shocks and bumps on the road. -50/50 lid-to-base ratio for easy loading and 4 portable Smooth Rolling Polyurethane Wheels:Portable Rolling Wheels provides smooth mobility.Ensure a quiet and effortless trip over a multitude of terrains and conditions. Easy To Open with Latches Design:Smarter and easier to open than traditional cases. Start the release and offers plenty of leverage to open with a light pull in just seconds. -High Performance -Waterproof:Keep your valuables dry with its high performance of watertight. Whether you're caught in rain or our at sea. -Outside Dimension: Length 44.88inches Width 25.31 inches Height 16.5inch.Inside Dimension:42"x22"x15.1".Cover Inner Depth:7.58inch.Bottom Inner Depth:7.3inch.Weight with foam:49.00 lbs

categories:GunsSporting Goods

1744 impressions

538 views

Winchester Model 1886 Sporting Rifle in 33W.C.F. Ref #1033 Winchester Model 1886 Sporting Rifle in 33W.C.F. with 24" round barrel, lever action dated 1910. Factory wood is very good at 98%, stock appears to have been varnished. Bluing is near zero on receiver, barrel and magazine app. 75%. Screws all look excellent. Original sights fully intact. Bore has rifling top to bottom with typical black powder corrosion. No repairs, alterations or additions. Operationally everything appears to be good. Cycles well, strong hammer spring and safety works. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used, and are usually acquired through estate liquidations. I visually inspect them and check basic operation only, and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find, but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competant gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammuntion. Thanks, Darcy Darcy's Sporting Estate Liquidations

categories:GunsSporting Goods

9936 impressions

952 views

All lorex equipment which include : Lorex monitor with remote model#WL2960H Lorex ultra wide 1080p HD Security camera x3 model#LBV2561U-C Lorex SD pro wireless security camera x2 Model#MC2960H Lorex HR Ais indoor outdoor color security camera x2 Model#MC6950 Lorex wireless digital camera x2 Model#MC2110 Nexxtech HDMI Interface with remote and ac power cable x1 Lorex Wireless Reciever x1 HDMI Cable x2 and extension adapter 9x AC Power Wall Plugs for cameras X3 connection cables Going for about $480 average altogether, a asking for about $350-$380, if sold tonight will let it go for $300. Message 7803059888 or email carlsonmike2019@gmail.com thanks

categories:Home ImprovementHousehold Items

1965 impressions

484 views

*Sold* Parting with my Colt 1878 revolver. She's single and double action, chambered in .476 Eley which is interchangeable with .455 Webley. These revolvers were most commonly chambered in .44-40 Winchester and dubbed the "Frontier Model", with the .476 chambering being very scarce. They were introduced in 1878 as a larger frame, larger caliber twist on the new Colt 1877 Thunderer/Lightning model, filling a niche most similar to the 1873 Single Action Army, but this time in double action as well. Selling to clear up some moolah for car repairs. Pre-1898 Canada legal antique. This revolver was made in 1885. It has the desirable Pall Mall one line address on the barrel reading "COLT’S PT.F.A. MFG. CO. HARTFORD CT. U.S.A. DEPOT 14. PALL MALL LONDON" with most words still visible. This address is a rarity and was only put on guns intended for the European markets. Serials match 15xxx, with the last 3 digits stamped on the cylinder. The loading gate is a replacement. This gorgeous revolver has an extremely nice black finish with shiny nickeled highlights on the hammer, trigger, and hammer screw. The visual condition speaks for itself. A stunning piece sure to catch eyes, and assurance that the metal will remain protected. The rifling is still strong and defined, showing some scattered frosting. The grips appear original, and are sturdy with minor holster wear on the high points from time on the hip. The action is great. The internals are shiny in factory condition. The cylinder locks up airtight at firing position. I have never seen an 1878 or 1877 with tighter lockup. In the unique fashion of the 1878 model design, this revolver has no cylinder stop allowing slight backrotation when you disengage the action, but it still generally cycles. The loading gate is a bit wobbly, contributing to backrotation. You can read more here: https://www.americanrifleman.org/content/colt-1878-revolver/ A beautiful collector piece and functional revolver. Don't be a stranger, feel free to call or text if you have any questions. Comes with .455 Webley ammo for $125 if you have PAL. Check my ads for more antiques Ships Canada, 18+, no PAL required Comes with FRT antique report I make no claims about the safety of shooting ANY antique. Check with a gunsmith! Tags: .22, .32, .38, .41, .44, .450, .45, RF, CF, Boxer, Kynoch, ACP, auto, Colt, Smith & Wesson, Remington, Webley, British, America, Canada, Tranter, SAA, Single Action Army, WG, Target, Frontier

categories:GunsSporting Goods

43300 impressions

3371 views

Chiappa 1887 Lever-Action T-Model Shotgun - 12GA, 2-3/4", 18.5" Barrel. 20 rounds down the tube. Valid pal required.

categories:GunsSporting Goods

8651 impressions

692 views

Winchester Model 88 in 308W calbre. Bluing is very good, some handling marks on stock Asking $1275, open to reasonable offers. No trades. Shipping by purchaser. Call/text 780 808 9777 anytime.

categories:GunsSporting Goods

9978 impressions

975 views