Looking to buy, guns for restoration projects. Will pay cash. I have my Pal. Looking for rusty, broken or crack stock, working or not working firearms to restore. Let me know what you want to get rid of

categories:GunsSporting Goods

998 impressions

131 views

Using the same principle as electroplating, this system uses a low voltage and chemicals to remove the lead or copper from your barrel and plate it on the sacrificial anode (stainless steel rod) that you insert in the barrel. It did work in my 243 win 1885 but I just don't shoot enough to make it worthwhile. I think if you had some heavily fouled barrels, maybe a cache of military surplus for example this would be alot less work that scrubbing forever. Comes with the controller, the chemicals, the stainless steel rod and the electrochemical isolation doo-dads. Not sure about shipping as the rods are 30" long and there are two chemicals. One for Copper and one for Lead. Cheers, Cody

categories:GunsSporting Goods

2625 impressions

163 views

Clymer 45 ACP.     No Go.            $65 Forster 223 rem.  Field                  $65 I bought these to simply make sure the headspace had not grown too big. I did not get the 'go' gauges as that defines the minimum headspace and I was looking out for headspace growing with usage of the gun. Primarily for when I was searching for guns to purchase.  The field gauges indicate maximum safe headspace in used guns, i.e. slightly larger than the SAAMI as manufactured. If a 'Field' gauge will chamber, don't shoot the gun.  I'm not sure if I ever actually used these. They are in as new condition. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

4885 impressions

224 views

I have for sale a Remington Vest Pocket single shot derringer in .41 rimfire. This little beauty retains approx. 75% of its original nickel finish. Mechanics are excellent with strong springs and crisp action. Bore on the 4″ Barrel is shiny with strong sharp riffling. Saw handle grips are in great condition. Price includes shipping. Comes with an RCMP FRT report with this guns serial number on it showing status.

categories:GunsSporting Goods

23590 impressions

1452 views

Belgium made british bulldog type revolver chambered in 455 webley. Finish is gun metal grey with some blue left in protected areas. Mechanics function well in both double and single action. Bore on the 3" barrel is good with aggressive rifling. Grips are in fair condition with some bruises. No chips, cracks or repairs. It has what appears to be a rack number stamped on it in a couple places ( Z537).Price includes shipping and it will come with an RCMP FRT report with this guns serial number showing status.

categories:GunsSporting Goods

18888 impressions

823 views

Cal: .455 Webley Finish: Finish is grey Mechanics: Functions well in both single and double action. Bore: Bore on the 6” barrel is dark with sharp lands and a small amount of freckling. Stock: Grip is in nice condition, possibly a replacement. This model was used by the northwest mounted police. Price includes shipping. Will come with an RCMP FRT report with this guns serial number showing status.

categories:GunsSporting Goods

18096 impressions

704 views

Chambering: .41LC Finish: Nickel plating is in pristine condition. fully engraved Mechanics: Excellent condition. Distinct 4 clicks of the hammer. Bore:  5 ½“ barrel with great rifling Stock: Ivory grips are in very good condition Additional: Comes with Colt historical letter. Shipping is included in the price. Will come with an RCMP FRT report with this guns serial number detailing status.

categories:GunsSporting Goods

16967 impressions

1245 views

Cal: .41 Rim fire Finish: Retains approx. 40% of its original nickel finish Mechanics: Action functions perfectly Bore: Bore on the 2.5” barrel is in good condition with lots of rifling. Stock: Genuine ivory grips are in good condition. A small chip on the bottom of left panel Price includes shipping. Will come with an RCMP FRT report with this guns serial number outlining status.

categories:GunsSporting Goods

13473 impressions

629 views

Have a gun, a collection or estate to disperse? I am a federally licensed gun dealer in north central Alberta that is always looking to buy. I buy rifles, shotguns, handguns , ammo and all manner of firearms accessories. Top dollar paid. Call for an estimate today.

categories:GunsSporting Goods

38977 impressions

3294 views

Selling my a few dust collectors to find new guns Mossberg 500 comes with long barrel $400 Canuck Sentry $400 Can deliver for additional fee

categories:GunsSporting Goods

42600 impressions

4575 views

Shot a couple times never let me down. Don’t need it as I have other shotguns that use more. Looking to trade or potentially sell for the right price

categories:GunsSporting Goods

6632 impressions

489 views

Moving to a condo, dont have room for this excellent oak gun cabinet. I made it by converting my mom's China cabinet. Room for 8 long guns, and all kinds of other stuff. It has a light to light up the long guns, drawers, and plenty of storage in the bottom. If you have the room, this is a kick ass unit!

categories:GunsSporting Goods

1536 impressions

222 views

30.06 bolt action scope sling case and 1box ammunition

categories:GunsSporting Goods

2636 impressions

601 views

Sniper CTAC 500FPS Upgraded Internals. Works great used around 5-10 battles. Just do not use airsoft guns anymore.

categories:Paintball and AirsoftSporting Goods

2224 impressions

428 views

I’m definitely on the fence about this one, I have a Left Handed Browning medallion Xbolt in 30-06. I bought it used. I haven’t sighted it in a shot a few rounds through it but that’s about it. As for the condition, it’s definitely seen some use, it’s the way I got it when I bought it. I’ll probably give it a 7/10. The only reason why I’m considering selling is I have another rifle project, im looking to fund. The downside of selling this is I also have a shit ton of ammo for it so I’m still on the fence not to mention, Good luck trying to find a left-handed rifle these days. If you found one in a store, you found the holy Grail of rifles. If you find one online used well, everyone thinks their guns are worth $3000 for some reason.I’ve searched everywhere and I can’t find anything anywhere. Prefer local pick up but not a dealbreaker. Valid pal No trades unless it’s another lh browning lol Will ship and add a gun lock on buyer’s dime No COD The ultimate way to contact me is by text or a phone call. I rarely check my emails. I work on a first come first serve basis, so if you send me an email, but someone sends me a text after obviously I’m gonna see the text first. Cash is king,

categories:GunsSporting Goods

8823 impressions

689 views

Looking for a great storage case? This is virtually brand new, very lightly used. Ideal protection & storage for guns, instrumentation, sales presentation packages, test equipment, photographic equipment and other delicate equipment Tough injection molded ABS outer shell will withstand a 7 foot drop to concrete Silicone rubber o-ring seal lasts for years without hardening or crazing to keep out water and corrosive gasses Dual function latches hold the lid tightly closed and equalize pressure when released for easy opening Padded fold-down handle makes for easy carrying Full length hinge, padlock loops and two front latches secure contents during transportation Optional water sealed inner flange provides support for mounting an electronics control panel Materials include UV protected ultra-high impact ABS shell, stainless steel hinge pins, silicone rubber o-ring INTERNAL DIMENSIONS: 17.8 x 12.8 x 6.8 in Available for pickup in Rocky Mountain House.

categories:Sporting Goods

4557 impressions

523 views

I run three Lee 4-Hole Turret Presses for case prep and general reloading. To keep my workspace organized, my disabled daughter and I printed these wall-mounted turret racks — they turned out great, so we printed extras to share. They’re perfect for light-duty use and free up valuable bench space, keeping your turrets neatly displayed and easy to swap out. Available in red, black, and blue. Printed from durable PLA filament. Designed for the Lee 4-Hole Turret Press. 👉 $10 each or 3 for $25 — Veteran printed 🇨🇦 👉 Help support a Canadian Army veteran and his disabled daughter 👉 Check out my other ads: https://townpost.ca/user/younggunscanada

categories:GunsSporting Goods

2371 impressions

290 views

I reload 9 mm, .45 ACP, and .40 S&W on my Lee Pro 1000 together with my disabled daughter. To free up bench space in our little workshop, we printed these wall-mounted turret racks — and they worked beautifully. Printed with PLA, they’re perfect for light-duty use and keeping your turrets organized and out of the way, so your press area stays clear and efficient. Available in Black, Blue, and Red. $10 each or 3 for $25 👉 Help support a Canadian Army veteran and his disabled daughter. 👉 Check out my other ads: https://townpost.ca/user/younggunscanada

categories:GunsSporting Goods

2098 impressions

223 views

I printed this wall rack system together with my disabled daughter to get our magazine collection properly organized. It worked so well we printed extras to share. 3 sizes available, each holds 5–6 mags Fits 1911, Browning Hi-Power, Glock 48, Glock 17, Glock 22, and similar styles Available in black, blue, and red. Made from durable PLA filament — sturdy enough for display use. If your mags are sitting in bins or drawers, this setup turns the clutter into a clean, easy-to-access display. $10 each. $25 for 3. 👉 Help support a Canadian Army veteran and his disabled daughter. 👉 Click here to see my other ads:https://townpost.ca/user/younggunscanada

categories:GunsSporting Goods

4341 impressions

320 views

Offering welding, fabrication, repair and trucking/heavy hauling trade for guns. I do everything from custom fab, aluminum, stainless, cast iron, equipment repairs, toy repair, hard facing, etc.. Also have a semi, step deck, and double drop RGN lowbed. For anything you need hauled.

categories:GunsSporting Goods

11661 impressions

530 views

2019 Ski-doo summit X factory turbo Shot start 3600 kms 165x3" track Kyb shocks Pro taper bars New plugs Ready to ride original owner. **the sled has a new display (still have the old one to go with sled also* Minimum 10k trade value weather is all guns or a partial trade/cash

categories:GunsSporting Goods

14627 impressions

971 views