Like brand new. Only shot to sightin Never hunted with. Text preferred.

categories:GunsSporting Goods

6492 impressions

927 views

The 2020 (P) Silver Eagle is an Emergency Production Issue coin produced by the Philadelphia Mint to help meet demand for the Silver Eagles during the COVID-19 pandemic. These coins were produced between April 8th and April 20th in 2020 - and a total of 240000 were produced. Because there are no "P" mint marks on these coins and they are nearly indistinguishable from West Point silver eagles. The perfect gift for any occasion, the 2020 American Eagle One Ounce Silver Proof Coin is also a collector favorite. The obverse (heads) features Adolph A. Weinman's full-length figure of Liberty in full stride, enveloped in folds of the flag, with her right hand extended and branches of laurel and oak in her left.

categories:CollectiblesHousehold Items

958 impressions

208 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features two classic rings. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 145 g/5.1 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

9900 impressions

411 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-4006 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 34 mm/1.35” Length: 108 mm/4.25” Weight: 154 g/5.4 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

9389 impressions

334 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 147 g/5.2 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

9167 impressions

413 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3000 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 24.5 mm/1” Clearance: 3.4 mm/.133" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 134 g/4.7 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

8638 impressions

339 views

Brand new Slant Compensator for Type 81 LMG. Small, compact and lightweight option to reduce muzzle flip, specifically manufactured for Type 81 LMG. When firing offhand, the rifle will recoil up and away from support hand, therefore the idea for the slant compensator was born to counteract this diagonal movement. This compensator features 3 positions; off-hand right hand shooting, bench/bi-pod shooting and off-hand left hand shooting. Manufactured in USA, Black Oxide Finish. Be Sure to select correct threading for rifle being fitted to. M16 Thread for T81 SR and LMG, serial numbers <20202001 & all 2021 prefix

categories:GunsSporting Goods

7091 impressions

563 views

Brand new Patent-pending design provides more than 98% flash elimination; virtually eliminates muzzle rise Serves as a rock-solid mounting adapter for SureFire SOCOM suppressors Multiple bearing surfaces provide suppressor alignment and prevent tines from ringing inside suppressor Port direction may be timed to optimize for right hand, left hand or neutral Precision machined from U.S. mill-certified, heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Individually inspected for all critical dimensions, including concentricity and alignment DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Installation requires no permanent modifications to weapon Durable construction delivers a long service life Color: Black Model No.: WARCOMP-556-M15x1 Caliber: 5.56x45mm NATO Finish: Matte black DLC coating Fabric/Material: US mill-certified heat-treated stainless steel Threads per Inch: M15x1 Gun Model: Heckler & Koch G36/HK MR223 Length: 3.6 in Weight: 3.9 oz Included Accessories: Suppressor Adapter

categories:GunsSporting Goods

5497 impressions

550 views

All Weather at Home window, triple pane (3 layers of glass) with 6.5" jamb, comes with 2 inch wide 'black' brick mold exterior, NEW. White pvc inside and out. OSM of window 445mm (17.5inches) wide x 953mm (37.5inches) tall. Opens to the left if standing on the outside, to an angle of 60 degrees. Crank handle is white, white screen. Triple glazed 2 x Low E. Energy rating of 40. Can deliver around Red Deer. Ideal for new construction, renovation, sheds, garage or lake cottages.

categories:Home ImprovementHousehold Items

1912 impressions

599 views

Brand new The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4 GEN 2. Made from precision cast black Melonite™ finished steel and compatible with both mil-spec and commercial-spec carbine receiver extensions. Features: Accepts any push-button QD sling swivel as well as the Magpul QDM Durable steel construction Case hardened and finished with Melonite™ for extreme resistance to wear and corrosion Works with both mil-spec and commercial-spec carbine receiver extensions (buffer tubes) NOTE: The ASAP QD is NOT compatible with A1/A2 fixed stocks as well as any other similarly mounted stock such as the Magpul PRS®, UBR®, and MOE® Rifle Stocks.

categories:GunsSporting Goods

4584 impressions

380 views

Looking to purchase a Browning Citori 20 gauge O/U shotgun suitable for sporting clays.Must be in good condition. Would consider another left hand 20 gauge O/U for sporting clays.

categories:GunsSporting Goods

11734 impressions

578 views