NOT for SALE - LILJA Warranty reference only. MAY 7, 2024 - Fifth anniversary. News Update; By acquiring a quality bore scope, I was able to see the problem with barrel. The rifling lands in front of the chamber had separated from barrel for about 1.25" and 1 land was protruding into bore. Cut off 2" of barrel chamber end. Machined new barrel end to fit receiver tighter by .002" and rechambered for 22 short only. At range gun shot 1/4" - 5 shot group at 50 yds. shooting CCI 22 short - 27 gr. HP. Seems the rifling is not shot out but can not understand rifling land separation. UNIQUE -- NO WARRANTY or REFUND from LILJA. Call phone or e-mail only. No messages. Aug. 27/24: Over the past 3 years I just added 3817 rds. of CCI 22 shorts to round count. Still shooting 1/4" groups at 50 yds.

categories:GunsSporting Goods

221430 impressions

17945 views

10) Winchester pre 64 Model 94 / 1894 - Saddle Ring Stud & Ring - $95.00 11) Winchester pre 64 Model 94 / 1894 - Saddle Ring Only - $85.00 Screws 14) 6-48 Filler Screws (4) - Blue $20.00 15) Win 1890-06-62 Tang Screw - 40.00 16) Win 1894-1892-1873 PG Tang Screw - 60.00 17) Win 1876-1886 Tang Screw - 40.00 18) Win 1894-1892-1873-1895 Tang Screw - 40.00 19) Win 1894-1892-1873-1895 Upper Tang Plug Screw - 35.00 20) Win 1894 (pre 64) Magazine Plug Screw Short - 35.00 21) Win 1894 (pre 64) Magazine Plug Screw Long - 35.00 22) Win 1894 (pre 64) Finger lever pin stop screw - 45.00 23) Win 1894 (pre 64) Link Pin Stop Screw - 40.00 24) Win 1894 (pre 64) Loading gate screw - 40.00 26) Win 1892 -1894 Forend Cap Screw (2) - 45.00 27) Win 1892 -1894 SRC Front Band Screw - 40.00 28) Win 1892 -1894 SRC Rear Band Screw - 40.00 29) Win 1885 Low Wall Tang Screw - 35.00 30) Win 1885 High Wall Tang Screw - 35.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads.

categories:GunsSporting Goods

68848 impressions

1649 views

Clearing out the following mags..... CZ 452 17 HMR 10 round, NEW $45.00 CZ 512 22LR, 25 round, have 2 $35.00 each Ruger 77 22LR $30.00 Ruger 77 22mag/17hmr $30.00 A-Bolt 280 Rem $75.00 X-Bolt 6.5 creedmore $60.00 X-Bolt standard long action $65.00 Marlin 89 22LR $40.00 Savage 99 243/308 $175.00 Tikka LSA 55 308, have 2 $200.00 each XPR standard short action $30.00 Mossberg 14A 22LR $30.00 Tikka T3 6.5 PRC extended $85.00 CIL 830, 222Rem $50.00 A-Bolt 7mm Mag $75.00 Remington 760 308 $75.00 Remington 7600 30-06 SOLD A-Bolt 260 Rem NIB $100.00 Marlin 17 HMR silver, 2 of them $35.00 each A-Bolt 204 Ruger $SOLD Shipping is on you!

categories:GunsSporting Goods

17925 impressions

842 views

1) Winchester pre 64 M94 - Carbine Blade Gold Beaded Insert - $95.00 2) Winchester pre 64 Model 94 - Front Sight Hood - $40.00 3) Winchester pre 64 Model 94 - Front Sight Beaded Insert - $75.00 4) Winchester pre 64 Model 94 - 22B Rear Sight - $350.00 6) Older Original 1A - 1B - 1C Elevators - $60.00 7) Winchester pre 64 Model 94 - 22G Rear Sight - $250.00 8) Winchester Model 94 - Rear Sight 3C - 6 Step Elevator - $50.00 9) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45.00 10) Winchester pre 64 Model 94 / 1894 - Saddle Ring Stud & Ring - $95.00 12) Winchester 1873 - 1892 Saddle Ring Staple (only) - $65.00 Screws 14) 6-48 Filler Screws (4) - Blue   $20.00 15) Win 1890-06-62 Tang Screw  - 40.00 16) Win 1894-1892-1873 PG Tang Screw - 60.00 17) Win 1876-1886 Tang Screw  -  40.00 20) Win 1894 (pre 64) Magazine Plug Screw Short - 35.00 21) Win 1894 (pre 64) Magazine Plug Screw Long -   35.00 22) Win 1894 (pre 64) Finger lever pin stop screw - 40.00 23) Win 1894 (pre 64) Link Pin Stop Screw - 40.00 24) Win 1894 (pre 64) Loading gate screw - 40.00 26) Win 1892 -1894 Forend Cap Screw (2) -  45.00 27) Win 1892 -1894 SRC Front Band Screw  - 40.00 28) Win 1892 -1894 SRC Rear Band Screw - 40.00 29) Win 1885 Low Wall Tang Screw - 40.00 30) Win 1885 High Wall Tang Screw - 40.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

129074 impressions

7776 views

1) Win post 64 M70 Rear Sight w/ 2 screws - $135.00 2) Win post 64 M70 Front Sight w/ Insert, Hood & Screws - $175.00 3) Win post 64 Model Front Sight Hood - Short (only) - $75.00 4) Win post 64 Model Front Sight Hood - Long (only) - $75.00 5) Win post 64 Pistol Grip Cap with Red "W" Insert - 0.735" x 1.16" - $100.00 6) Win post 64 Pistol Grip Cap "W" Insert Only - 0.735" x 1.16" - $75.00 7) Winchester Pistol Grip Cap Scroll Insert Only - $30.00 --- 21) Win pre 64 M70 - 22G Rear Sight w/o Elevator - $275 22) Win 3C - 6 Step Elevator - $50 23) Win pre 64 M70 Folding Rear Sight - .47" H - $100 24) Win pre 64 M70 - Front Sight Insert - $75 25) Win pre 64 M70 - Front Sight Hood - $40 26) Winchester Marksman - Target Stock - Sling Swivels - $150.00 27) Win pre 64 M70 - Trigger, Bolt Stop & Sear Assembly - (without Pins) - $155 28) Win pre 64 M70 - Trigger, Bolt Stop & Sear Assembly - (with Pins) - $175 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

56039 impressions

1047 views

Here's a replacement trigger guard in case yours is broken! It seems to basically fit all the cooey 22s, you can definitely check with me to make sure. There are a long and a short version available. Please measure the distance between the screw holes to make sure. Cooey 39/60/600/?64?

categories:GunsSporting Goods

72922 impressions

5498 views

Brand new Non-restricted Caliber.22 LR Action: Lever-Action (Take Down) Barrel Length: 12″ Capacity: 9 Rounds Feed System: Magazine Tube Trigger System: Single Stock: Wood Rear Sight: Short Buckhorn Twist Rate: 1:16 Material: Alloy Frame, Steel Barrel Net Weight: 2.00 lb Finish: Black Extraction: Auto 920.441 Made in Italy

categories:GunsSporting Goods

1240 impressions

115 views

Brand new never shot 7mm rem mag. Have 3boxes of ammo to go with it. Will trade for a pair of either .22 or short action hunting rifles. Ie savage axis or ruger 10/22. May trade for other interesting non restricted as well

categories:GunsSporting Goods

71854 impressions

6122 views

Shotgun adapters are back on hand now! Free shipping Canada wide on all orders over $250! Convert your 12ga shotgun to fire pistol ammunition! These are RIFLED adapters! We have various calibers and we have both short compact adapters and full length ones. The short ones are far lighter and great for plinking/bug out bag. The longer adapters are quite accurate and can even be used for small game hunting. We sell these in 22LR, 9mm, 40S&W, 45ACP, 357MAG, 44MAG. https://partsonly.ca/product-category/shotgunadapters/ Please head to our website to check stock status or make a purchase. You can reach out directly to info@partsonly.ca with any questions. All major credit cards accepted, e-transfer accepted.

categories:GunsSporting Goods

16371 impressions

706 views

For sale is a Strikefire II red dot system from Vortex optics. This sight features a 30mm tube design, providing a larger field of view and the ability to conveniently mount it at any height using common 30mm rings. It has a 4 MOA dot that is easy to acquire quickly, and is switchable between red / green. There are 10 adjustable brightness settings, chosen with the rear facing controls. The last chosen level is where the unit powers up to. The included cantilever mount is ideal for AR platforms, as it places the optics bore center 40mm above the base surface. Although it is not limited to AR's, this versatile sight will work just as well across countless other applications that require rapid target acquisition. Shockproof construction with a high recoil rating, due to its robust design, making it ideal for a long list of calibres. Waterproof and fog-proof, thanks to nitrogen gas purging. Includes flip-up lens covers, and a cantilever ring mount. This sight is not brand new, but it's in great shape, and was well taken care of. Every aspect of it functions like it should, right off the shelf. If used optics are a concerning area to you,fear not, as this sight is covered by the industry leading VIP Unconditional Lifetime Warranty from Vortex. I have also got a pair of rail mounted, offset, folding BUIS (back up iron sights), which serve as a great last resort, in the event the battery dies on the sight. These are definitely better suited for a long, flat top rail as opposed to a short section on top of a shotgun. They sit on a 45° axis when deployed, have 2 options for the adjustable rear sight ring size, and an adjustable front pin height. The springs are very strong in these, and they firmly snap into position at the push of a button. Asking $225 for the red dot alone, or $275 including the BUIS. Located near Hardisty, AB Can ship at buyers expense, quote available upon request. Will be right around $25 within Alberta.

categories:GunsSporting Goods

1133 impressions

89 views

Sake Short Action Stock Excellent Condition Next to no scuffs or cracks or see scratches Pachmyer Recoil pad See Pics for Details Came off a .308 Asking $200 Or Best Offer Msg Me or Txt Me at 587-969-9228 if interested.

categories:GunsSporting Goods

2140 impressions

192 views

MDT Magazine Extender Polymer Add +2 capacity to your AICS metal short action magazines and gain an advantage in high round count competitions. Lightweight and durable, only minutes to install. COMPATIBILITY Tested and compatible with MDT, AICS and Accurate-Mag AICS pattern 3.050 length metal magazines. IMPORTANT NOTES When used with MDT 10-round metal magazines, a longer spring/follower combination must be used (available separately on the MDT website), as the existing spring is not long enough to provide sufficient force on the follower when the extender is installed. This will work with all other known metal 10 round 308 AICS magazines. This extender will not work with any magazine that has any inserts like our 6BR magazine or a metal 223 mag with polymer inserts. HARDWARE INCLUDED * Ships with 4 screws, used to secure extender to your existing magazine

categories:Sporting Goods

5051 impressions

332 views

MDT Magazine Metal short action AICS 308win / 6.5 Creedmoor 12 round on binder Plate 2.960 Max COAL These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard. Available with or without the front binder plate. See details below for benefits and limitations of each version. DETAILS MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction. SPECIFICATIONS * 3.055” Outside Length * 2.870” max cartridge overall length (COAL) with binder plate * 2.960” max cartridge overall length (COAL) without binder plate (see limitations below) * 4.61” Rear Height COMPATIBILITY These magazines will need to be slightly modified to function with Howa 1500 SA rifles. * 308WIN * 6mm Creedmoor * 243WIN * 260 Rem * 6.5 Creedmoor * 7mm-08 Win * 308/7.62x51 NATO * 22 - 250 Rem (will work at a reduced capacity) BINDER PLATE DETAILS * The magazines with front binder plates are compatible with all rifles equipped with AICS-pattern bottom metal or chassis systems. The binder plate holds the cartridges back from the front of the magazines and guides them past the bottom of the feed ramp. The maximum cartridge overall length (COAL) that will fit in this magazine is 2.870”. * The magazines without front binder plates allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp (see photo below).

categories:Sporting Goods

13281 impressions

325 views

I have over 30,000 once fired brass cases of many different calibers and head stamps for sale. Prices are as follows, followed by approximate amounts available. I can ship up to 5kg or 11 lbs anywhere in Canada for $20 flat rate. That would be (300 +-) 300 Win Mag cases and more of smaller cases. Check this ad periodically as brass will be added when available or deleted when sold out. 300 Win Mag $1.00 each (3,000 +- available) 7mm Rem Mag $1.00 each (2,200 +- available) 300 Win Short Mag $1.00 each (350 +- available) 7mm Win Short Mag $1.00 each (174 +- available) 270 Win Short Mag $1.00 each (SOLD OUT) 30-06 Springfield $.50 each (2,600 +- available) 308 Win $.50 each (1850 +- available) 270-Win $.50 each (1,650 +- available) 7mm-08 $.50 each (SOLD OUT) 243 Win $.50 each (800 +- available) 303 British $.75 each (350 +- available) 22-250 $.75 each (200 +- available) 30-30 Win $.75 each (500 +- available) 6.5 Creedmoor $.75 each (SOLD OUT) 350 Legend $.50 each (75 +- available) 223/556 $.25 each (5,000 +- available) 9mm Luger $.06 each (1,000 +- available) Some other smaller lots available. Text or email is best. Text: 780-876-5050 or email: jdwill1951@gmail.com

categories:GunsSporting Goods

153223 impressions

4094 views

This is a short action firing pin and spring out of a 222 cal. Remington.

categories:GunsSporting Goods

8901 impressions

291 views

I'm back to printing and selling my 3d printed ammo cases! Each case holds 100rds. The standard cases are for 22lr / short and are unmarked (unless added on), and the .17HMR and .22 WMR cases have sunken in labeling on the side. Colours can be mixed and matched to make them as custom as you’d like, nothing beats an ammo case that matches the rifle! Each case consists of 1 box, 2 inserts and 1 lid. ————pricing———— 50rd .22LR cases - 8$ each (minimum of 2 required). +1$ each for ammo type or brand printed on lid. .22lr /.17Mach2 case - 12$ each. +2$ each for ammo type or brand printed on lid. +2 for Labels on sides or ends. 200rd .22LR cases - 24$ each. Comes with 4 inserts. +3$ each for ammo type or brand printed on lid. +2$ each to fill labeling with black or white epoxy. .17HMR / .22WMR - 14$ each. +2$ each to fill labeling with black or white epoxy. +2$ each for ammo type or brand printed on lid. Custom Designs, Filament types and other add-ons can be discussed as well! The more custom, the better! Bulk rates available on larger orders. Most orders will be printed on demand so please allow a few days to get everything printed and shipped out. Bigger orders take more time and custom requests of ammo brand or type on lid take extra time to design and print. Shipping is on buyer. I generally use Canada post flat rate boxes but I can do up a quote based on postal code to get the best price. If you have any questions please reach out or if you’d like some photos of something not pictured. Check my ads in the near future for more 3d printed firearm items as I aim to have an inventory of handy shooting items or fun and useful projects!

categories:GunsSporting Goods

26157 impressions

749 views

Selling a cadex strike nuke chassis for Tina t3x short action. It has a 223 magazine id like to sell as a package. The chassis new is $700 + and the mag is $100

categories:GunsSporting Goods

2138 impressions

216 views

Selling firewood bucked or split. Poplar, Spruce/Pine, tamarack and Birch. Your choice. Pick-up or Delivery to the Edson, Niton, Evansburg, Whitecourt and Hinton areas. Sold in cords, half cords, box loads long or short. Poplar- bucked: 175 split: 200 Pine/spruce- bucked: 225 split: 250 Birch- bucked: 425 split: 450 Tamarack- bucked:375 split: 400 *NEW* We now even do bundles $5.00ech And kindling for 5.00 per bundle DELIVERY IS EXTRA 50 per cord within 45km. Txting is best but can call as well. 7807286547 We help load up your truck or unload on deliveries for free.

categories:FirewoodYard and Garden

9518 impressions

1503 views

Selling firewood bucked or split. Poplar, Spruce, Pine, tamarack, and Birch. Your choice. Delivery to the Edson, Peers, Niton, Evansburg, Whitecourt and Hinton area. Sold in cords, half cords, box loads long or short. Poplar- bucked: 175 split: 200 Pine/spruce- bucked: 225 split: 250 Birch- bucked: 425 split: 450 Tamarack- bucked: 375 split: 400 Kindling bundles - 5 each Free large chopping block with every order. Delivery is extra 35$ per cord, up to 45km. Txting is best but can call as well. 7807286547

categories:FirewoodYard and Garden

83711 impressions

8479 views

This 2018 Ram 1500 Big Horn is an extremely rare find, it only has 16,609 KMS! It was owned by an elderly gentleman who only drove it on occasion. It has extensive service records and was only ever serviced at our dealership. I made a video of the vehicle so feel free to copy and paste the link below to view! VIDEO: https://youtube.com/shorts/14k3pL2Bh3g?si=CkEul6MfT8Mnzdzd The CarFax is completely clean, feel free to message and ask for it. $0 Down, We specialize in all credit situations, build your credit today! ✅ Bad Credit ✅ No Credit ✅ Repossession ✅ Bankruptcy ✅ Foreclosure ✅ SSI ✅ Disability ✅ Government Assistance YOU'RE APPROVED! Kilometers: 16,543 km Stock #: P-2115 VIN: 1C6RR7LT7JS224598 Drive train: Four-wheel drive Transmission: Automatic Fuel: Gas Truck bed length: 67" Towing capacity up to: 4612kg Engine: 5.7 L Cylinders: V8

categories:Auto and TrailersTrucks

6883 impressions

383 views

I got a rare little semi automatic,22 for sale, it’s a right handed Winchester model 190 and 22 cal. This is a tube fed unit, shoots, shorts, or long range ammo. It’s been a fun little rifle. Condition I would give it an 8-9/10. Comes with a Tasco scope and the rings two. Reason why I’m selling is to fund another project. Dog not included lol Valid pal No trades unless Will ship and purchase a gun lock on buyers dime. No cod Text is the ultimate way to get a hold of me or a phone call, as I don’t check my emails very often.

categories:GunsSporting Goods

4187 impressions

525 views