**For Sale: Hornady Lock and Load AP Press** Hornady Lock and Load AP press is in excellent working condition, with only about 500 rounds run through it. While this press is of high-quality and reliable, it doesn’t align with my reloading preferences, as I’m quite particular/anal about various factors that make the auto-progressive feature less suited for my needs. Included with the press are four Lock and Load bushings and a powder measure. There is some minor shipping damage on the powder measure tub, but it operates as intended. price is firm This is a local pickup only in the Edmonton/Sherwood Park area. The item can be locally delivered for a fee of 50.00 Don’t miss out on this great opportunity!.

categories:Tools and Equipment

1753 impressions

295 views

New in Box, decided to go with a different setup. The Hornady Lock-N-Load Classic Reloading Kit comes with everything you need to turn out high-quality, accurate handloads. You get everything listed here, plus complete instructions. The Hornady Handbook of Cartridge Reloading is especially valuable, with hundreds of rifle and pistol loads for every shooting application. Lock-N-Load Classic single-stage press Lock-N-Load Powder Measure Electronic Scale Powder Trickler Funnel The 9th Edition Hornady Handbook of Cartridge Reloading Three Lock-N-Load Die Bushings Primer Catcher Positive Priming System Hand-Held Priming Tool Universal Reloading Block Chamfering and Deburring Tool Primer Turning Plate One Shot Case Lube

categories:Sporting GoodsGuns

7498 impressions

872 views

Now available at Gold'n Loan Outfitters and and Pawn, open 7 days a week to keep you locked and loaded and located conviently on 48st in the Town of Stony Plain. Shop us online or instore for our full selection.

categories:Sporting GoodsGuns

4445 impressions

462 views

Selling my KWA M93R. Asking $300 obo. Open to any offers. Been lightly used. I just don’t have time to air soft anymore. Original plastic barrel was replaced and upgraded to a full metal barrel. On full auto you need some beefy parts to keep it running smooth. Gun works great. Mags have plenty of life left on the seals. Please note that the rate of fire switch actually has 3 rates. In the middle of single and full auto you can toggle the switch for 3 round burst. You really gotta be deliberate with this as the switch does have a small amount of play. Gun comes with original mag plus a high cap mag. Also comes with a nice holster that fits the air soft nicely. Can be formed to almost any setup. No pics of it but CO2 gas, speed loader and 0.25 gg Plastic BB’s included so you can lock and load as soon as it’s in your hands. Can be shipped. But I will require payment/partial payment upfront. Contact me for more info: 403 - 923 - 7452 a/[kz0HiFz](https://imgur.com/a/kz0HiFz)

categories:Sporting GoodsPaintball and Airsoft

5995 impressions

756 views

New in package Hornady Lock And Load AP shell plate # 35. See pictures for fitment.

categories:Sporting GoodsGuns

5606 impressions

680 views

Hornady Lock and Load large pistol case feeder plate. New never used. Will ship anywhere in Canada at buyers expense.

categories:Sporting GoodsGuns

8772 impressions

936 views

Now in stock at Gold'n Loan Outfitters and Pawn, located in Stony Plain and open 7 days a week to keep you locked and loaded

categories:Sporting GoodsGuns

792 impressions

316 views

Private Sale! By the First and Original Owner! 2012 Ford Mustang, 3.7 Liter, V-6, Automatic, Fully loaded with Only 85,000 KM Excellent condition In and Out no accidents, no road collision. Fully loaded, Cruise control, Power Locks and Windows, Power Mirrors, Aux and much more Clean In and Out - No Rust Excellent condition, no smoking vehicle, never pets in All services has been performed always in time - every 5,000 km mark. Last full service just performed recently in October. New Windshield, Fresh synthetic oil, new brakes and rotors, newer 17" Pirelli Tires, new filters, new spark plugs, fresh coolant and brake fluid, new serpentine belt, transmission oil has been changed lately too. Always parked in a heated garage Asking Only $13,900 The Reason of the Sale - got a truck from work on a daily basis. No PayPal, no low ball offers, no trades please Keywords: AWD, Toyota Cadillac Jaguar range rover Volvo Mercedes BMW ford Nissan Infiniti Oldsmobile dodge ram jeep Kia Hyundai Porsche land cruiser Prado Volkswagen Audi smart mini Cooper Honda land cruiser Pajero Montero 4runner

categories:Auto and TrailersCars

2810 impressions

286 views

Hold-On portable Ice Fishing Shack: tow hitch, insulated, propane tank/stove/lantern/heater, 5x 8" access holes, vents, peep hole, locking door. Easy to load on truck and tow with quad/skidoo.

categories:Sporting Goods

3589 impressions

543 views

84-inch Snap-On Epiq toolbox with side cabinet and work center. New in 2019. Power drawer in side cabinet. Key fob to control locks on toolbox, work center and interior light. Key lock on side cabinet. Loaded with mostly Snapon tools. Cordless impacts, saws, lights, temp guns, list goes on.

categories:Tools and Equipment

2544 impressions

481 views

Looking to sell our Overlanding set up. Located in Diamond Valley just Southwest of Calgary. Below are the details broken down. Treeline Ponderosa 4 season roof top tent. The tent boasts a king-sized bed and comes with the upgraded mattress. There was a small leak in one corner that was repaired by Treeline. The tent has been stored in a heated garage every winter and the past two summers. Originally cost over $5500. Leitner designs - ACS forged Rack for 2007 to 2020 Chev Silverado 6’6” bed. The rack bolts on, it does require some drilling for rear support braces. New rivet nuts are required from Leitner for about $28. The rack is rated for 1400 lbs static weight and 800 dynamic on highway. The rear bar can be moved to the front to open space for hauling tall loads and no limiting the truck bed. New these racks run $2999.95 from Modula located in Surrey, BC. We have two Leitner Designs - Gear pod XL. Each pod runs $1099.95 at Modula, when they are in stock. These bins provide convenient storage with sealed gaskets measuring on the interior; 48” wide 14” deep 13” tall (40 gallons or 160 quarts volume). The handles have working locks; the bins also have built in padlock capabilities. Included are Leitner designs flush mount tent brackets. These prevent bolt ends sticking down to catch on if you must climb into the truck bed. All together the setup runs $10,700 before tax, I am asking $7000 for everything as a package. Broken out individually I am asking: Tent alone: $3500 ACS Forged Rack alone: $2500    ACS Forged Rack & Gear pods: $4000 Gear pods: $750/each Due to the size shipping is not an option. Thanks for looking.

categories:Sporting GoodsCamping and Survival Gear

467 impressions

84 views

Leer legend canopy for dodge ram 1500 classic body style 2009-2025 6.4 box. Great condition and loaded with features. Passenger side has windoor with sliding glass and driver side is regular sliding glass window both side have screens. Fully carpet lined with roof cagro hooks installed and cargo rack tracks on top of roof. All brand new locks installed on tailgate window and windoor window. Made for a crew cab with 6.4 bed but i have it on my quad cab 6.4 bed it fits just fine. Brand new with all options and install it would cost $5000 at cap it edmonton. I posted a picture of the options so you can phone to see for yourself. Selling for $2800 text or call 587 974 6580 if interested.

categories:Auto and Trailers

3278 impressions

687 views

6.5 prc Winchester XPR with a mounted Zeiss Conquest v4 scope, 4-16X44 less than 100 shots Included: 3 boxes of ammo Carrying case Bipod Shoulder strap Scope: 4x zoom range • 90% light transmission • ZEISS T* coating is a guarantee of the brilliant, high-contrast images • Tested by exposure to rapid temperature shocks Rifle: Permacote FDE metal finish • Solid steel receiver • Free-floated barrel • M.O.A. Trigger system • 3 locking lugs • Short 60° bolt lift • 2-position thumb safety • Inflex Technology Recoil Pad The Winchester® XPR™ Hunter Bolt-Action Rifle combines proven concepts from Winchester's time-tested Model 70 with modern manufacturing processes and materials to produce a great hunting rifle at an affordable price. This XPR Hunter package comes with a composite stock, featuring full TrueTimber® Strata® camo, and a Permacote® FDE finished barrel and receiver. TrueTimber Strata is an excellent all-purpose camo pattern that blends into nearly any environment at any distance. An innovative Inflex Technology Recoil Pad absorbs recoil considerably. A factory-mounted and bore sighted Vortex Crossfire II 3-9x40mm scope, with a BDC reticle, allows you to obtain the rifle's true accuracy potential. Precision accuracy is ensured with a solid steel receiver that sits solidly in the polymer stock with a cross-mounted recoil lug, and a free-floated, target-crowned barrel. The XPR uses a newly designed M.O.A. Trigger system that's adjustable for both over-travel and pull weight. The bolt on the XPR has 3 locking lugs with a short 60-degree lift. The Winchester XPR Hunter bolt-action rifle has a 2-position thumb safety that locks the bolt when engaged. The bolt can also be cycled when the safety is engaged by using the bolt release button. A cocking indicator on the bolt shroud can be seen or felt by the user to know if the rifle is cocked and ready to fire. A detachable, single-stack magazine facilitates loading and unloading the rifle.

categories:Sporting GoodsGuns

15221 impressions

1005 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2957 impressions

494 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2744 impressions

407 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2776 impressions

492 views

Brand new Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g. The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself. It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA. Dual-Axis Locking AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis. The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis. These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability. Low Axis Over Bore The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed. The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained. Built Rugged As the AK Itself The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics. Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking. No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release. Accessory Side Rail Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories. Compatibility The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder. Greater Optics Versatility. Superior Finish. A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base. The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.

categories:Sporting GoodsGuns

6266 impressions

615 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

4194 impressions

485 views

Get ready to elevate your winter experience with this incredible 2022 Ski-Doo Expedition Sport 600cc ACE! This machine is an absolute beast, equipped to tackle any winter terrain Alberta can throw at it. With low hours and a suite of top-notch add-ons, this sled is built for serious performance and comfort. **Key Specs & Features:** - **600cc ACE Engine**: Known for power, fuel efficiency, and reliability, this engine delivers smooth rides and outstanding performance in all conditions. - **Extended Add-Ons & Upgrades**: - **Stackable Fuel Tank**: Say goodbye to range anxiety! Bring extra fuel for those long-haul adventures. - **2 Programmed Keys**: Including a standard and performance key, so you’re ready for any terrain or riding style. - **Super Clamps**: Added for secure, hassle-free transport of your sled—just lock it in, and you’re good to go! - **NGK Spark Plugs**: Improved spark plugs for consistent performance and reliable starting. - **Performance Drive Belt**: Engineered to withstand extreme conditions and heavy loads, ensuring that your sled runs smoothly on the most challenging trails. - **Locker Key**: Boosts security for peace of mind, keeping your machine safe when parked. - **Tunnel Bag**: Spacious and rugged, perfect for packing gear, extra layers, or snacks for your winter adventures. **Low Kms**: This machine has been meticulous cared for and has barely been used at only 344kms! **Why You’ll Love It:** This Expedition Sport is the ideal mix of utility, comfort, and adventure. It’s in **excellent condition** and ready for both work and play. Whether you’re out in the backcountry, plowing through fresh powder, or heading out for an all-day trail ride, this sled has everything you need. **Price:** $9600 **Location:** SW edmonton **Contact:** Send a message to schedule a time to see it in person! Don’t wait—machines like this, especially fully loaded, don’t last long on the market

categories:Auto and TrailersSnowmobiles

3366 impressions

495 views

Winchester Lever Action Repeating Rifle, .38-40 WCF, mfg. 1890. This is a good honest original ‘73 fresh out of a very old local collection. Standard length 24" octagon barrel retains it’s original dovetailed blade front sight and adjustable buckhorn rear. The metal has a mottled dark gray patina overall with some traces of original bluing remaining within protected areas around the sideplates, trigger, and along the dust cover rail. Sharp edges with generally smooth surfaces throughout. Some very light surface oxidation spotting forming toward the muzzle. The stock retains about 40% factory varnish with the balance worn to a pleasing dark untouched patina. Tight wood-to-metal fit with moderate wear overall and a just really honest, unmolested appearance. There is some very minor chipping along the edges of the butt and a super tight old 1" hairline crack at the front left side of the forearm. Original hammer, trigger, lever & locking nut, loading gate, dust cover, buttplate with trapdoor compartment (cleaning rod absent), forend cap, and magazine tube & band. Screws appear to be original. Crystal clear original barrel address, caliber marking, model designation, and serial number "336159" on lower tang. Action is very smooth, crisp, and secure and functions perfectly. Rifling is worn and pitted at the very tip of the muzzle but otherwise the bore shows good rifling overall with moderate/heavy blackpowder frosting and pinprick pitting scattered throughout. A very solid original '73 Winchester with a great Western look..

categories:Sporting GoodsGuns

8532 impressions

226 views

11-87 12 gauge camo 3 inch. Please read the full ad before contacting me. This is a bit of a project gun. I bought it new in 2008 and shot it casually over the years with almost nothing but lead trap loads. Recently it developed a problem cycling the action after the shot. It will always fire. However, sometimes it will cycle the action, other times the action cycles half way and stops, and still other times it will not cycle at all. Sometimes it picks up a new shell and sometimes it won't. Sometimes is locks up and can only be freed by popping the barrel and the action bars out and re assembling it. I don't have the time or interest to look into it . It might be a simple fix who knows. I already bought a gun to replace it. This isI a package deal only. This includes the gun as it came from the factory, with 1 modified choke tube, a wrench, 27(?) Inch barrel. It will also come with a Remington 20 inch fully rifled 12 gauge barrel that has open sights. This barrel has 11 slugs through it and was used on 1 trip to shoot a moose. I will ship this gun on the buyers dime but I would much prefer a local sale so that the buyer can actually see the problems themselves. Text Jeff at 403 390 2570 for the fastest response. Located in Airdrie

categories:Sporting GoodsGuns

7553 impressions

935 views