Have to Gauge-mate 410 -22lr cartridges These allow you to shoot 22’s through your 410 shotgun. Only have 2. $50 each. Pickup Edmonton 1 left !!!!

categories:GunsSporting Goods

5245 impressions

192 views

**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. New! TriStar Viper G2 Semi-Auto Shotgun 12 Gauge, 28” vent rib barrel, 3 inch, synthetic stock, righthanded, 5+1 rd, Mobilchoke, and fiber optic front sight.
Comes with length of pull shims and 3 chokes - Full, Improved Cylinder and Modified(factory installed in the barrel). The TriStar Viper G2 is model number 24105. I might be interested in a 243 Win rifle/combo depending on brand and condition. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. First Paid, First Served.
Holds only with deposit. Delivery Negotiable.
Buyer pays for shipping costs and makes arrangements for payment. DESCRIPTION The TriStar Viper Series Semi Automatic Gas Operated Shotguns are reliable, functional and hard working. Synthetic models have 3″ chambers to take 2 3/4″ or 3″ shells. Chambers are chrome lined. Barrels are threaded for the Beretta/Benelli style choke tubes and every gun comes with 3 tubes (IC, M, F) standard. Manual E-Z Load Magazine Cut-Off. Vent Rib with Matted Sight Plane. Fiber Optic Front Sight. 3 Beretta/Benelli Style Chokes (IC, M, F). 5 Round Magazine. Chrome-line Chamber and Barrel. Soft Touch on all Synthetic Models. WEIGHT - 6.9 lbs LENGTH OF PULL - 14.25”

categories:GunsSporting Goods

14820 impressions

428 views

**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have for sale a new Canuck Folding Enforcer 2 Pump-Action 12 Gauge 3” Shotgun - Model CFE2 1212 (Tri-Folding). I am the first owner but haven’t fired this new rifle. It’s got the following features: - 3+1 capacity - 12” Crome lined barrel - Aluminum receiver, extractor - Mobil chokes (F,M,C) - 10” Mobil threaded barrel extension - 1913 Rail Fore End
 - Fore End Handle **SEE MY OTHER RIFLE COMBO, BINOCULARS, AMMO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. NO TRADES First Paid, First Served.
 Holds only with deposit. Delivery negotiable.
 Buyer pays for shipping costs and makes arrangements for rifle payment. Product video of Canuck Folding Enforcer 2 (at the 8:00mins time stamp) https://youtu.be/K62WCCu8CHc?si=sCNq3hQ6CmBou2Uq PRODUCT DESCRIPTION Canuck specializes in manufacturing high quality hunting and sporting shotguns. They have been producing other well known, brand name shotguns for years, acquiring experience, knowledge, and excellent workmanship in the process, while saving their most innovative ideas for their own line of firearms. The result is a line of stunningly beautiful, masterful, and technically sound firearms. The solidly constructed Canuck Folding Enforcer 2 will more than fulfill your shooting needs. From home defense to backpacking in the wilderness, the Canuck Folding Enforcer 2 is the perfect choice! When it comes to reliability and performance, no other folding pump-action shotgun in its price range compares to the rugged Canuck Enforcer. Model # - CFE2 1212 Gauge - 12 Gauge Chamber - 2-3/4" or 3" Capacity - 3+1 Sight - Fixed Front, Fiber Optic Front Sight Barrel Length - 12" Choke -F,M,C Stock - Tactical Folding (Polymer) Forend - Tactical Ribbed (Polymer) Rails - Picatinny Top Rail For Optics and Forend With Picatinny Rail Overall Length - 34" Overall Length Folded -18" Weight - 5.6 lbs

categories:GunsSporting Goods

28010 impressions

2522 views

**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have for sale a used very good condition Remington 870 12ga, 3” Shotgun that comes with a 28” Field Vent Rib Barrel, and shotgun chokes. (**SOLD - 23” Cantilever Rifled Barrel/Scope has been SOLD, and is no longer available).   **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. First Paid, First Served. Holds only with deposit. Delivery Negotiable.  Buyer pays for shipping costs and makes arrangements for payment.

categories:GunsSporting Goods

12994 impressions

878 views

Modle 31 Jc higgins semi auto tube fed 22lr. Has built in retractable "seat belt" style shoulder sling that functions great. Wood and finish is in pretty good condition as well as the blueing and rest of gun with only minor blemishes. Has adj front sight and scope mounted on. Gun shoots well, but doesn't like the cheap Winchester 22lr amo, so I stick with cci and federal... could be cause I havent cleaned it also lol 375$obo Only selling my collection to fund upcoming collarbone reconstruction, view my other adds! Thanks

categories:GunsSporting Goods

4765 impressions

405 views

Both are made in Brazil, both are fixed full and mod chokes. Several wood only dings in both but no cracks and very little metal wear showing a very low round count. No issues. Selling both at once. 28" is a Condor 1. by IGA What a nice Christmas Gift .... get your buddy into trap shooting over the winter ...  A great Christmas Present .... No cracks or issues.  Please use cell phone text messaging. Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:GunsSporting Goods

1624 impressions

152 views

The word Paragon means, “a model of excellence”. And this is true of this optic series. I see the Paragon as being the technological descendant of the old Bellorussian PK-AS sight, a one power prism sight that through innovative use of lenses, seems to have a nearly non existent edge when you look through it. Thick opaque edges serve only to limit situational awareness. Competing brands and their prism sights are a miss due to large knobs… they are “good enough”. But the nearly invisible edge of the PK-AS and later on the Paragon discarded the idea that “good enough” was actually “good enough” in regards to situational awareness. Unlike the PK-AS, the Paragon is designed to be small and light. All Paragon models also boast the best eye relief when ranked against competing micro prism sights. -------------------------------------------- Vector Optics Paragon x1 The design of he Paragon x1 is as low profile as possible. No opaque protrusions to reduce situational awareness. Controls, windage and elevation adjustments are close to the body of the optic. It is ideal for someone wanting a close quarters optic but not wanting to be at the mercy of batteries. In the cold Canadian climate there is some wisdom in avoiding something battery dependent in the outdoors. The one power paragon has a circle dot reticle which, according to gestalt psychology, draws the eye quickly to the center. It is a reticle type which is faster to acquire than a dot or a crosshair. The Paragon x1 comes with a low mount and a high mount to be optimized for a large variety of firearm types, from the traditional Mossberg shotgun to the 180C. Caliber Range (max): 12ga, 338. Ideal For: Shotguns, PC9, SKS, FX9, Scorpion, Raven 9, Templar, wk180, ws-mcr, tavor -------------------------------------------- Vector Optics Paragon x3 The design of he Paragon x3 is as low profile as possible. No opaque protrusions to reduce situational awareness. Controls, windage and elevation adjustments are close to the body of the optic. The 3 power prism sight is ideal as a battlesight for modern sporting rifles as the 3 power gives a flexibility at close, medium and occasionally longer ranges quite comfortably. 3 power, in my opinion, is the maximum magnification your brain can resolve with 2 eyes open style shooting. 3 power is ideal for people expecting to engage targets at 300 meters or closer. The x3 Paragon is lightweight and small measuring 3" in length weighing only 225g. The reticle has a drop compensator for 223 balistics. Caliber Range (max): 12ga, 338. Ideal For: FX9, Scorpion, Raven 9, Templar, wk180, ws-mcr, tavor, crypto -------------------------------------------- Specter Arms is a dealer for Vector Optics and the x1 Paragon is not the only thing in stock. Red dots, scopes and micro reflex sights are all available on the website. Send a text to 7809079585 for more info. Do you need to outfit your family or survival group? Ask about bulk discounts on multiple quantities of the same product. Maybe you need something a bit more for competition? Check out my ad for red dot and reflex optics. Please click on my user name for other ads and shipping policies. WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:GunsSporting Goods

116782 impressions

3503 views

Left handed Savage, comes with Calibre Specific Cabelas scope installed. Most accurate gun I’ve owned, I’m just getting old and have a lot of pain in my elbows and looking to get an ultra light gun which I’m hoping will be easier on me. Shoots best with the Remington Core-Lokt 130 grain ammo, but I haven’t tried a higher grain with it. Located in Lacombe, AB. I could possibly meet you in Red Deer, Calgary or Edmonton at some point if need be.

categories:GunsSporting Goods

1609 impressions

321 views

NOT for SALE - LILJA Warranty reference only. MAY 7, 2024 - Fifth anniversary. News Update; By acquiring a quality bore scope, I was able to see the problem with barrel. The rifling lands in front of the chamber had separated from barrel for about 1.25" and 1 land was protruding into bore. Cut off 2" of barrel chamber end. Machined new barrel end to fit receiver tighter by .002" and rechambered for 22 short only. At range gun shot 1/4" - 5 shot group at 50 yds. shooting CCI 22 short - 27 gr. HP. Seems the rifling is not shot out but can not understand rifling land separation. UNIQUE -- NO WARRANTY or REFUND from LILJA. Call phone or e-mail only. No messages. Aug. 27/24: Over the past 3 years I just added 3817 rds. of CCI 22 shorts to round count. Still shooting 1/4" groups at 50 yds.

categories:GunsSporting Goods

212379 impressions

17635 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5141 impressions

172 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5238 impressions

147 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

11648 impressions

520 views

Many Czech produced post-war Mausers were made with mostly late war and some newly produced parts. These were sold to various different militaries and on the commercial market many and of these were sold to the Israelis as well. The rifle features many late war stamped parts including the oversized winter trigger guard but does include a half size cleaning rod unlike the Kriegsmodell K98's produced by the Germans. It does not have a stock disk, as it just has a hole drilled in the butt cap for disassembly of the bolt. This particular example has a low serial number, but the serial number ranges are all over because of different contracts. The whole gun matches with the new forced match serial number. It has a scrubbed receiver, and has a beech wood stock and handguard in a nice brown color. The rifle bore is actually in very good shape, but there is some stubborn fouling stuck in there and I don't have a 32 Caliber cleaning brush to remove it but I'm sure if you use the proper brush it should come out pretty easy since it's not rust. Just shooting the rifle might even remove it. The muzzle crown is an excellent condition as pictured. The rifle does have minor some stock damage. It looks like a vice dent or some sort of hammering pattern, but it's only on the one side (pictured). Overall the gun is in very good original condition and the action is nice and smooth and it is unfired by me. This is a nice unique example of a k98 made by Brno, who is very well known for their quality produced firearms. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:GunsSporting Goods

9890 impressions

640 views

$150 Often Specter Arms gets asked for a good scope for a light rifle; a 22 or a 223. With the budget friendly X4 scope, people now have a inexpensive low power variable optic packed with a variety of useful features. Its compact size and weight don't add much in terms of bulk keeping your favorite plinker light and easy to carry. In fact the X4 measures only 9.1" long. Its 1-4 magnification is plenty to shoot out comfortably to 200 meters placing this optic as a viable contender as an entry level 3 gun scope. It uses 1" rings which makes its compatible with a lot of older rifles designed with only 1" rings in mind. Picatinny rings are included. Finally, an illuminated reticle gives a nice contrast when shooting at dark backgrounds or in low light. Caliber Max: 762x39, 223 Appropriate For: Wk180C, WS-MCR, Wk181, Ar-15, Su-16, tm-22, Crypto, Raven, Henry Homesteader, Ruger 10/22 _____________ Specter Arms is a dealer for Victoptics is the sub-brand of Vector Optics. SA has more in stock then just S6s and X4s; red dots, scopes and micro reflex sights are all available on the website. Send a text to 7809079585 for more info. If Canada post is not on strike, shipping is available at actual cost or pick up in SE Edmonton. Please click on my user name for other ads and shipping policies. WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:GunsSporting Goods

70285 impressions

2484 views

Winchester Model 1894 38-55, Ref #1040 Winchester lever action, sporting rifle, octagon barrel, full length magazine. Dated app. 1895. Comes with Winchester letter. Barrel is 26” long with sights intact. Bore shows black powder use. Bluing throughout at about 50%. Screws have seen use. Functionally everything seems very good, follower works, saety is good, hammer drops when trigger pulled. Issues:  Tang has been repaired and there is no firing pin, forend has a crack in it.  Only reasonable offers will be considered. No trades please.   Standard Disclaimer, some items may not apply.  The firearms and accessories I sell may be new or used, and are usually acquired through estate liquidations. I visually inspect them and check basic operation only, and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find, but can not be held responsible for what I may miss.  It is your responsibility to have your  firearm inspected by a competant gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammuntion.  Thanks,  Darcy Darcy's Estate Liquidations

categories:Sporting Goods

848 impressions

88 views

DEPRIMED AND TUMBLED - About 20 or so were fired twice while developing a load.......offered for sale ( case-gards included ) as I no longer shoot 9mm.    I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***

categories:GunsSporting Goods

1211 impressions

66 views

I received this in my Christmas stocking last year ( for a gopher shooting accessory ) but never was able to use it,  having sold my gopher rifle the month before......a good deal for someone who shoots .223 or a similar rifle.    I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.        ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   *** 

categories:GunsSporting Goods

2518 impressions

72 views

NEVER USED...... received as a Christmas gift many years ago ( very much appreciated ) but never used , as it was never part of my BP cartridge shooting regimen, which always worked just fine as it was. Note the rubber sealing ring.....good Buffalo Arms quality item.....total length approx. 19 1/4 inches. I am willing to ship at buyer’s expense ( dependent upon CPC's strike rotations ) , or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

11401 impressions

467 views

16 oz. reloading room/range accessory, which keeps your coffee hot or " other beverage " cold while you are reloading or at the range ..... bought a few of these at a gun show in Denver in the year 2000 but this one was never used, so is in excellent condition. If you have your own pictures, you can unscrew the bottom, remove the photo sheet as a template and replace it with your own pictures. I'm not sure who made it, but the bottom is marked patent pending and matches some of my early Starbucks bottoms that were ( and still are ) all made in China----BOTTOM MARKED " do not microwave" and " hand wash only" also like the Starbucks tumblers and in the same script. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

21732 impressions

606 views

Yildiz Pro White Adjustable 12GAx3″ 32″ barrels with Adjustable Comb Robust Boss locking system reduces felt recoil & muzzle flip 4140 Chromium Molybdenum High-Tensile Steel barrels, action & parts Right hand palm swell Exquisitely-grained  Grade 4 exhibition-grade Turkish walnut furniture Hinge pins are replaceable for ease of maintenance 733 chrome-lined bores for a lifetime of durability and performance Silver soldered ribs for longevity and barrel integrity Fitted Hard Case Comes with 5 chokes In excellent condition (spare a minor scratch on the butt stock shown in one of the photos) Less than 300 rounds through it, shoots great with no issues at all Retails for $5000 plus taxes: https://thegundealer.ca/product/yildiz-pro-white-adjustable-12gax3-32bbls-copy/ Can ship for extra Will entertain partial trades (of particular interest are Beretta 1301, Benelli M4, Beretta Ultima A400, Vortex Fury 5000 AB, Vortex Razor Long Range Scopes and Yugo SKS)

categories:GunsSporting Goods

24395 impressions

995 views

Selling my Canuck wrangler tactical lever action in 357 mag. Bought as a truck/backpack gun and didn’t end up being what i wanted. Put around 100 rounds through it and it was great shooting just not what i need. Looking for 1100$ located in Stony plain. Will need proof of valid PAL and to go through the transfer crap to sell! Text at 7802219040

categories:GunsSporting Goods

713 impressions

88 views