Extremely rare Smith & Wesson double action favourite model.  approximately 1000 of these produced this one was sent to Berlin in 1887. This revolver still retains over 90% of the original nickel finish comes with a very nice set of pearl grips, the action functions perfect both in single and double action with excellent lock up and timing. Don’t miss an opportunity to own this extremely rare Smith & Wesson Antique. It comes with the RCMP, FRT document and the Smith & Wesson history letter. 

categories:GunsSporting Goods

8246 impressions

448 views

Smith & Wesson new model double action no 3 .This revolver still retains about 75% of the original nickel finish comes with a very nice set of pearl grips showing a little bit of were but no chips or cracks. The action functions very well in single or double action with good timing and lock up  still  lots of strong visible rifle but minor typical black powder pitting, it has a 6 inch barrel chambered in 44 Russian caliber  as well as a long cylinder , 1-9/16” This is an  revolver and you do not require PAL to purchase it. RCMP, FRT documents included.

categories:GunsSporting Goods

9088 impressions

489 views

Extremely rare Smith & Wesson No 3 chambered in 455 Eley with target sites and a 1-9/16 inch cylinder Was a special order. This revolver still retains about 75% of the original bluing it comes with a 7 1/2 inch barrel checkered walnut grips showing where but good condition no chips or cracks. The trigger set is amazing. This revolver is one of twelve ordered and shipped to Birmingham England in 1905, this revolver frame was produced prior to 1888 as documented and is considered an Antique status in Canada. Smith & Wesson factory letter included. PAL not required

categories:GunsSporting Goods

75114 impressions

4291 views

Located in NW Edmonton, Bald Eagle, Shrouded Forest, print by Daniel Smith, 1993, Signed by Daniel Smith. Approximately 43" x 34" Price is $225 Located in NW Edmonton. Call or text me 780-803-7501. Please view my other ads

categories:CollectiblesHousehold Items

799 impressions

131 views

Bored out factory 375 h&h barrel bt Ron smith Bedded McMillan stock

categories:GunsSporting Goods

4416 impressions

380 views

Pre-WW1 British Pattern 1821 Canadian Artillery Officer's Sword – no Scabbard Savage and Lyman Montreal Sword This company name was used by the Montreal silversmiths Savage and Lyman between 1868-1878. The left side of the blade immediately in front of the guard Is marked Savage & Lyman Montreal Within the engraving on the left side is a Crown.  Believed to be indicative of Queen Victoria. The right side of the blade has a small brass insert which says PROOF.  Wilkinson Sword introduced these Proof Discs in 1844. In the engraving on the right side of the blade is the word ARTILLERY The guard is steel and has fish skin wire bound grips with most of the fish skin having been worn away.   Length of Sword – 40 1/2” Length of Grip including the Guard – 5 1/2” Blade Length – 34 1/2”   Savage & Lyman Montreal (or Savage & Lyman and Company) were manufacturers and suppliers of swords, known for military pattern swords like those for Canadian militia units (e.g., 1st Battalion Chasseurs Canadiens), marking them as producers/sellers, though like many firms, they likely had blades forged elsewhere (perhaps by specialists like J. Martin in Montreal) and then finished, hilted, proofed, and sold by Savage & Lyman in Montreal, a common practice for armsmakers then.  Key Points: Evidence of Manufacturing: Swords clearly marked "SAVAGE & LYMAN MONTREAL" exist in museum collections, showing they were a recognized name in arms. Role: They functioned as an arms dealer and supplier, customizing and selling weapons for Canadian military and militia. Production vs. Supply: While they might not have forged every single blade from raw steel in-house, they were responsible for the final product, including proofing and adding their own markings, as seen on a 1885 Chasseurs Canadiens sword. In short, they were a key player in the Montreal arms trade, making/selling quality military swords, even if blade forging was sometimes outsourced to other specialized smiths.    $500.00 Or Best Offer   Thanks,  Phil

categories:GunsSporting Goods

3202 impressions

122 views

Black, steel. Complete with follower, spring, floor plate off of 30-06 1500

categories:GunsSporting Goods

3379 impressions

276 views

needs to go to a gun smith or used as parts

categories:GunsSporting Goods

744 impressions

90 views

As it reads an active recognition and protection of human rights and fundamental freedoms. Personally, signed by John Diefenbaker, and made out to Coleen Smith. Overall, excellent condition. 30x24” frame Can ship anywhere in Canada, Please see my other ads for rare and collectible, posters, accessories, and firearms.

categories:CollectiblesHousehold Items

5508 impressions

586 views

Cal. 30-06. Serial# 4798918. Bbl.24". Marked behind front sight "SC" with a flaming bomb and "10-43." Aperture rear sight graduated to 800 yards. Blade front sight. Swept bolt marked on top of handle "B2" and marking underneath appears as "F." Safety lug is Remington style, as is the bolt shroud. All stamped furniture, including large bow triggerguard and fine checkered trap buttplate. Walnut stock set with two recoil bolts. The grip is marked underneath with encircled "P" proof. Assembly marks are visible ahead of the trigger guard. CONDITION: stock set has a and bruises in its appearance commensurate with extensive service. There are numerous handling marks. The metal retains its original finish with some thinning and wear. Very good, shiny 4-groove bore. also comes with a leather combat sling. Can ship anywhere in Canada, Please see my other ads for rare firearms, accessories, and ammunition.

categories:GunsSporting Goods

20370 impressions

479 views

Smith Ent - Tempe Arz - 42A Rifle Ladder Sight . Standard 3/8" Dovetail . As new Condition . $325.00 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

854 impressions

47 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

12396 impressions

436 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

19897 impressions

731 views

DeSantis Leather scabbard leather black holster 7 inches tall will fit a smith and Wesson 5946 or large size item, in good condition, rides higher on the belt, quick thumb release, southside pick up, no holds without e transfer and if posted it is available.

categories:Camping and Survival GearSporting Goods

10703 impressions

1067 views

Paul Reed Smith Custom 24 Smoked orange. One owner guitar. Basically it is unplayed/unused. Beth Johnson (PRS Guitars) Oct 31, 2022, 14:46 EDT Serial# 170247 is a 2011 Custom 24, with a Flame Maple 10-top, Mahogany neck with a Standard profile, East Indian Rosewood fretboard with bird inlays, PRS tremolo bridge, 59/09 treble and bass pickups, finished in Smoked Orange, with nickel hardware. Have a great week, Beth Customer Service Paul Reed Smith Guitars 380 Log Canoe Circle Stevensville, MD 21666 www.prsguitars.com Serial# says 2011 build and Bill of sale confirms was sold in 2011. (By my self) (BOS) included with sale. No buckle rash/scratches but has a chip on head stock, right top body side and lower body as shown in 7th 8th and 9th pictures. Other than that it is a top notch guitar. The pictures show weird imperfections that are not there, just crappy pics. I have attached guitar strap locks. All paper work and case. Buyer pays shipping and insurance. Selling all, moving out of Canada next year. No Trades or low ball offers please.

categories:Household ItemsInstruments

13697 impressions

1386 views

Brand New Non Restricted Caliber: .45-70 Govt Capacity 5+1 Barrel:16.5” barrel with 1:20” RH twist 8 groove. 11/16 x 24 threaded barrel with thread protector. Aluminum M-LOK® handguard w/15 M-LOK slots. Forged 416 stainless steel receiver with Armornite® finish. Flat trigger with crisp break. Large Lever loop. Black synthetic stock with textured grip panels. XS Sights® adjustable rear ghost ring sight. HIVIZ® H3 front sight. Part #: 14453 Made in USA

categories:GunsSporting Goods

5437 impressions

315 views

Smith and Wesson 38S&W, double action revolver. For sale or trade (my grandson needs a rifle to start hunting next fall) for 7mm08, 6.5 Creedmoor, Thompson Center prohunter action, or a decent scope.

categories:GunsSporting Goods

2270 impressions

368 views

Brand new This OEM factory original 5.0" barrel is constructed from steel and specifically for the Smith & Wesson M&P 9 M2.0 pistols chambered in 9mm. Featuring a black finish, this barrel is perfect as a spare on the workbench or as an immediate replacement for a lost or damaged component.

categories:GunsSporting Goods

4580 impressions

247 views

- Janis Joplin I Got Dem Ol' Kozmic Blues Again Mama Vintage Vinyl LP '69, Excellent $25 - Zamfir - The Lonely Shepherd (Vinyl Record LP), excellent SOLD - Louis Armstrong all stars - LP Record Vinyl Album 12", Excellent $10 - Nat King Cole - Love Is a Many Splendored Thing (Vinyl Record LP), Excellent $10 - HURRICANE SMITH - HURRICANE SMITH 1972, Like New $10 - The 5th Dimension Special, $5 - The Dean Franconi Strings, Like New Free with any 2 or more above purchase - Kings Road Plays Elton John Hits, Free with any 2 or more above purchase

categories:Household Items

1321 impressions

238 views

Vinyl LP Records AERO SMITH, BRUCE SPRINGSTEEN, ALICE COOPER, DAVID BOWIE, SANTANA - AERO SMITH Rocks $30 - AERO SMITH Draw The Line $5 Fair - BRUCE SPRINGSTEEN Born In The USA $25 - ALICE COOPER Greatest Hits $20 - DAVID BOWIE Lets Dance SOLD - SANTANA Greatest Hits SOLD All in good condition or description

categories:Household Items

1455 impressions

219 views

Brand new Non-restricted Lever Action Caliber: 44 Mag Capacity: 9 Barrel: 19.25″ 11/16-24 Threaded 410 Stainless Steel Sights: Gold bead front sight,XS Sights ghost ring rear sight Accepts mounts compatible with Marlin® 1894 hole patterns Black synthetic stock with textured grip panels M-LOK® synthetic forend with textured grip panels 1:20″ RH Twist 8-Groove Rifling Large loop operating lever Forged 416 SS Receiver Optic Ready Safety: Cross-Bolt Full Length: 36" Weight: 108.8 oz Made in USA

categories:GunsSporting Goods

2504 impressions

135 views