See picture for details. Can ship anywhere, Please see my other ads for rare and collectable military.

categories:Sporting Goods

1300 impressions

328 views

Here you have a nice used example of something that was used during the war. Recently gone through and cleaned. Everything operates as it should. The bolt and breach do not match. However, there is a Canadian marked 1942 sling that is original. The markings are very faint. The pistol grip and  stock are marked with  C  arrow. The front site and front  stock  have the LB stamped Steele. This is a five groove barrel in very good and clean condition. C-arrow  is also stamped on the breach. There are a few bumps and bruises to be expected from the age of this rifle. Outside of that you have something that should function and last another very long time. Also comes with a Bayonet and scabbard.  can ship anywhere in Canada,  please see my other ads for rare and collectible, firearms and accessories.

categories:GunsSporting Goods

5760 impressions

253 views

British bayonet for experimental Pattern 1913 .276 rifle overstamped with U.S. & Remington markings and redesignated as a Model 1917. This band fits on the P 14 and P 17 rifles as well as Winchester trench shotguns. So if you’re looking for something completely different and rare, here is an experimental bayonet for your collection. Can ship anywhere in Canada, Please see my other ads for rare and collectable military items.

categories:CollectiblesHousehold Items

1555 impressions

83 views

French Chassepot Model 1866 Yataghan Sword Bayonet This Yataghan Sword Bayonet and Scabbard have matching Serial #’s (M 8093) Manufactured at the French State Arms Plant of St. Etienne in August 1871 The base of the blade on the left side has the number 1 immediately above the guard. The base of the blade on the right side has a B in a circle and an M with a crown above it in a circle immediately above the guard The guard also has 3 marks on the left side in the curve of the guard a star over the letter V, the letter B in a circle and a T under what could be a star   Overall Length – with blade in scabbard  - 27 7/8” Length of Bayonet – 27 3/8” Length of Grip including the Guard – 4 3/4” Blade Length – 22 5/8”   $275.00   Thanks, Phil

categories:GunsSporting Goods

3755 impressions

89 views

French Model 1874 T Back Sword Bayonet for use on the 11mm M1874 Gras rifle Manufactured at the French State Arms Plant of Tulle in August 1878 The Gras was the last of the French sword type bayonets and was manufactured from 1874 until about 1885. The Bayonet and Scabbard have matching Serial numbers 96363 The left side of the guard is engraved with what looks like half a written L and the numbers 96363.  The scabbard has the same mark and numbers on the left side. Above the number on the guard are 2 diamonds each with the letter B in them. The front of the guard just above the top of the blade has the letters L and P The pommel has the number 2 stamped inside at the base along with other stamps I have not identified. The top of the tang has what looks like a C6 stamped in it. The back of the blade is engraved with M d’Armes de Tulle Aout 1878   The Spring Lock works as designed.   Overall Length – with blade in scabbard  - 25 7/8” Length of Bayonet – 25 3/8” The blade has never been sharpened. Length of Grip including the Guard – 4 3/4” Blade Length – 20 3/8”   $250.00   Thanks, Phil

categories:GunsSporting Goods

3888 impressions

103 views

British Pattern 1853 socket bayonet with leather scabbard and a frog This is a British M1853 Socket Bayonet for use with the Enfield, Snider, Martini rifles. This 1853 pattern was the standard bayonet carried by nearly every British infantryman of the mid-19th century and widely used during the Crimean War, Indian Mutiny, and in numerous colonial campaigns. Production of the1853 pattern socket bayonet continued throughout the life of the Enfield Muzzleloader and the Snider rifle and was finally terminated in 1875. The blade has a slight downward curve to allow easier reloading while fixed to the muzzle-loading Enfield rifle. Measuring 44 cm (17 inches), it features a triangular cross-section with fullers on all three sides, tapering to a narrow, down-turned point. Scabbard in good condition and includes a leather frog. The brass tip on the scabbard wiggles a bit but is still solidly attached. The scabbard is stamped W.D. (War Department) below the frog stud with the Broad Arrow symbol above the initials. The top of the blade at the base is stamped with an E over a crown over the number 25 Overall Length – with blade in scabbard - 21 3/4” Length of Bayonet – 20 5/8” Length of Grip including the Guard – 3 5/8” Blade Length – 17” $200.00 Thanks, Phil

categories:GunsSporting Goods

2257 impressions

61 views

Complete enfield barreled action just waiting for a new stock. Full length barrel with bayonet lug intact, not drilled and tapped bore is very good. Everything works as it should. Price is obo.

categories:GunsSporting Goods

8392 impressions

533 views

WW1 French M1886 bayonet for the Lebel rifle. This is the war time simplified version without the quillion (hook) and with the brass handle. This version with the brass handle is of a type produced during the First World War, from the 25th of October 1914 until July of 1917.   The left side of the blade has the initials SG stamped just in front of the guard to identify the Maker.  The "S.G." mark on a French bayonet from the World War I era stands for Sutterlin Lippmann & Cie., a manufacturer located in Saint Étienne. The base of the guard has a stylized letter P with the number 45979 stamped into it. The scabbard has this matching serial number. The base of the grip has the number 11 stamped into it. The release button works as designed.   Overall Length – with blade in scabbard  - 25 3/4” Length of Bayonet – 25 1/8” Length of Grip including the Guard – 4 5/8” Blade Length – 20 1/4”   $250.00   Thanks, Phil

categories:GunsSporting Goods

2490 impressions

81 views

Lee Enfield No. 7 Mk 1 bayonet. The blade is not pitted and in overall good condition. Scabbard is steel. Text or call only!!

categories:GunsSporting Goods

66062 impressions

3468 views

The S8 wraps backwards over the barrel and makes the barrel look like a shorter barreled, suppressed firearm without doing either of those things. It is made out of a corrosion resistant stainless steel, nitrided black, for years of hard professional use. Although the linear compensator does not decrease the sound the firearm makes, it does direct that sound away from the shooter making the shooting experience a bit easier on the ears. The S8 compensator comes in 3 threading patterns: 1/2x28TPI (the .223 standard). 5/8x24TPI 1/2x36TPI The compensator requires a barrel diameter less than 1” with an unobstructed 2” of barrel behind the threads (before thing like gas blocks, front sight towers or bayonet lugs). If you have things like front sight posts that prevent a wrap around comp, consider the S9. The S9 was developed when customers running the ruger PC or the RDB couldn't use the S8 due to its wrap back design. The S9 is threaded in 1/2x28tpi Also shown is the S8 with a few barrel lengths combined with our HG handguards. WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:GunsSporting Goods

78217 impressions

3520 views

British Pattern 1853 socket bayonet with leather scabbard This is a British M1853 Socket Bayonet for use with the Enfield, Snider, Martini rifles. This 1853 pattern was the standard bayonet carried by nearly every British infantryman of the mid-19th century and widely used during the Crimean War, Indian Mutiny, and in numerous colonial campaigns. Production of the1853 pattern socket bayonet continued throughout the life of the Enfield Muzzleloader and the Snider rifle and was finally terminated in 1875. The blade has a slight downward curve to allow easier reloading while fixed to the muzzle-loading Enfield rifle. Measuring 44 cm (17 inches), it features a triangular cross-section with fullers on all three sides, tapering to a narrow, down-turned point. The blade is in good solid condition but is badly tarnished. The scabbard is in fair condition. The bottom brass below the frog hook is pulled free from the leather scabbard. The brass tip on the scabbard wiggles a bit but is still solidly attached. The stitching on the scabbard in the last 3 ½” above the end cap is partially missing but the scabbard is solid and not separating. The scabbard is stamped W.D. (War Department) below the frog stud with the Broad Arrow symbol above the initials. This stamping is difficult to see. The top of the blade at the base is stamped with an E over a crown over the number 25 Overall Length – with blade in scabbard - 21 3/8” Length of Bayonet – 20 3/4” Length of Grip including the Guard – 3 5/8” Blade Length – 17 1/8” $125.00 Thanks, Phil

categories:GunsSporting Goods

648 impressions

33 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

14566 impressions

292 views

This Ross rifle bayonet was converted to a PCMR knife during World War II and issued to rangers to protect the West Coast of Canada as they were expecting an invasion from Japan. I don’t see these too often and they do offer something unique for your collection. Can ship anywhere in Canada, Please see my other ads for collectable military items.

categories:CollectiblesHousehold Items

268 impressions

63 views

This bayonet is in used condition with most of the finish on the blade is missing. The scabbard has rust/ pitting. For a Lee Enfield mrk3 no1 rifle Can ship anywhere in Canada Please see my other ads for rare and collectable military accessories

categories:CollectiblesHousehold Items

1839 impressions

205 views

This bayonet is in high condition has a little bit of grease on the tip of the metal I can easily be wiped off. No rust or pitting. For a Lee Enfield mrk3 no1 rifle Can ship anywhere in Canada Please see my other ads for rare and collectable military accessories

categories:CollectiblesHousehold Items

1645 impressions

217 views

These are Correct battle survivors for your bayonets! These have clearly been heavily used and show good wear. $10each. Can ship anywhere, Please see my other ads for rare and collectible firearms and accessories,

categories:GunsSporting Goods

19857 impressions

328 views

Cal. 303 Brit. S# 94L8460. Bbl. 25 1/2”. Blade front sight with protective ears. MK3 ladder aperture rear sight graduated to 1200m. Mismatched numbers. Left side of the receiver is marked with No. 4 MKI*, Long Branch, and 1950 markings. Arsenal rework Suncoirte finish. Hardwood stock with grooves set with bottom-mounted sling swivels and canvas marked sling. MAG. one 10-rd. CONDITION: stock set has a darkened appearance with a few light, scattered dings, scratches, and handling wear. Metal shows overall fading to gray with a Suncorite and finish. Action functions properly when hand-cycled. Very good to excellent bore. Spiked Bayonet and metal scabbard can be added for an extra $50 Can ship anywhere in Canada, Please my other ads for rare and collectable firearms and accessories.

categories:GunsSporting Goods

51719 impressions

1939 views

Brazilian Model 1908 Mauser Rifle unissued 116 years old! Excellent pre WW1 German craftsmanship and quality. Manufactured under contract to Brazil, left side of the receiver stamped DEUTSCHE WAFFEN-UND/MUNITIIONSFABRIKEN.BERLIN. The right side of the chamber stamped MOD.1908. Complete with bayonet and brass mounted leather scabbard. Excellent un-issued condition. All original matching numbers. 7mm Mauser. Can Ship Anywhere in Canada, Please see my other collectable rifles and accessories.

categories:GunsSporting Goods

60532 impressions

1729 views

FITS LEE ENFIELD NO.4 RIFLES & MKV STEN MG'S, RICASSO MARKED: "NO. 7 MKI / L", CROSS-GUARD MARKED WITH BROAD ARROW, BROWN COMPOSITE GRIPS, METAL POMMEL MARKED WITH BROAD ARROWS, METAL SCABBARD, BLADE APPROX. 8 1/8" & OAL APPROX. 12.5" Can ship anywhere in Canada Please see my other ads for rare and collectable firearms, accessories, and ammunition

categories:Camping and Survival GearSporting Goods

12996 impressions

1039 views

These are extremely rare and very hard to find. This comes with the scabbard in metal as well as the bayonet, of course in good condition. This is meant for the number 4 rifle. I can ship this anywhere, Please see my other items for rare and collectible, firearms and accessories

categories:GunsSporting Goods

20523 impressions

544 views

Very good condition for collecting or shooting. Numbers are mismatched. Comes with an original marked sling with a Cbroard arrow. The overall 8.5 barrel(5Groove) & stock, No repairs. In the wood. A few bumps to be expected however would amazing for any serious collector. Long Branch bayonet can be purchased for $95. Can ship anywhere in Canada, Please see my other adds for rare and collectable firearms & accessories.

categories:Sporting Goods

8110 impressions

636 views