Carl Gustaf 6.5 X 55 with 3-9 X40 scope for sale. $800 obo. Open to offers & trades. Located in Leduc Alberta Must have a current PAL. Text or call 780 554-8780.

categories:GunsSporting Goods

2561 impressions

894 views

Selling my Novritsch SSG24 bolt-action sniper rifle – the most reliable out-of-the-box sniper in airsoft. No upgrades needed – this thing is laser-accurate, durable, and field-ready. Key Features: • 6.01mm precision inner barrel – Deadly accurate at long range • Pre-upgraded internals – Shoots up to 650 FPS with the right spring (interchangeable) • Adjustable hop-up – Easy to dial in for perfect BB flight • Polymer stock & metal barrel – Built tough for any terrain • 28-round magazine – Smooth feeding, even with heavy BBs Condition: Excellent – barely used, well-maintained, and shoots perfectly. No cracks, no issues. Included: SSG24 rifle 1 Magazine (Optional: Scope, bipod, case — if you’re including extras) Bought for 1k selling for 900 – Fair offers considered. DM me if you want a sniper that hits hard and straight every time. First come, first served!

categories:GunsSporting Goods

5569 impressions

828 views

Selling my Remington model 783 chambered in 300 Win Mag. Roughly 300 rounds through the barrel. Got it as a range rifle but it’s a little much for that. Comes with cheap riser, and the mounted Vortex Crossfire 4-12x44. Shoots great, nothing wrong with it. Looking to get $700 but will entertain reasonable offers

categories:GunsSporting Goods

5092 impressions

572 views

1 Case Winchester Super Target. 10 boxes x 25 shotshells/box. Kelowna, BC. No delivery outside of Kelowna City Limits. No Shipping. PAL - valid PAL required. Low Offers will be ignored. Email replies may not be noticed. Text messages and phone calls will be responded to😎👍

categories:GunsSporting Goods

2591 impressions

386 views

Prvi Partizan PPU Ammunition Prvi Partizan PPU ammo is some of the most consistent imported production ammo on the market today. PPU ammo offers you an exception value and high quality cartridge for a variety of calibers. PPU ammo is built in southwestern Serbia where they have been manufacturing ammo for almost 87 years beginning in 1928. PPU also supplies ammunition to armed forces and law enforcement officials throughout the world. Specifications: Caliber: 7x57 Weight: 175 Grain Bullet Style: FMJ-BT Casing: Brass Muzzle Velocity: 2,460 fps Muzzle Energy: 2,325 ft. lbs. Part #: A141 Willing to ship on buyers dime

categories:GunsSporting Goods

6796 impressions

890 views

PMC 45 ACP Bronze 230 Gr FMJ Ammunition Box of 50 Reliable performance shot after shot, PMC Bronze bridges the gap between range ammo costs and premium ammo precision! The commercial ammunition Poongsan Corporation produces for hunting and competition shooting under the brand name “PMC” (precision-made cartridges), is gaining a solid reputation for excellent quality in the global market. To meet the growing demand for sporting ammunition, the company develops and exports over 100 different types of ammunition. Taking pride in the large number of types and zero-defect performance of its ammunition, Poongsan uses carefully-selected, high-quality raw materials and ensures the high performance of sporting ammunition by carrying out stringent quality inspections and target tests. The Bronze family of products offers reliable performace at an affordable price. The Lead core is enclosed by a strong metal jacket on this non-expanding, deep penetrating bullet. Provides smooth, reliable feeding in all types of semi-auto handguns. Features and Specifications: Manufacturer Number: 45A Caliber: .45 ACP Bullet Type: Full Metal Jacket Projectile Bullet Weight: 230 Grain Muzzle Velocity: 830 fps Muzzle Energy: 352 ft/lbs New Reloadable Brass Case 50 Rounds per Box Willing to ship on buyers dime

categories:GunsSporting Goods

7964 impressions

879 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2465 impressions

357 views

Brand new The ROMEO3XL open reflex sight is the ideal sighting solution for MSR rifles, shotguns, carbines, submachine guns, and full-size handguns. The ROMEO3XL features a high transmittance red notch reflector for excellent brightness, light transmittance, and zero distortion. 3 MOA  red dot with multiple intensity settings ensure rapid target engagement under a full range of lighting conditions. The large 35mm lens offers an unparalleled field of view in an open reflex sight. High transmittance red notch reflector for excellent brightness, light transmittance, and zero distortion 3 MOA dot with multiple intensity settings for rapid target engagement under a full range of lighting conditions MOTAC (motion activated illumination system) powers up when it senses motion and powers down when it does not Side loading CR2032 battery Comes with a low-profile M1913 Picatinny mount Aircraft grade CNC alluminum housing Dependable waterproof (IPX-7) and fog proof performance Finish: Black Height: 1.4 Inches Length: 2.1 Inches Style: Reflex Weight: 1.5 Ounce Width: 1.3 Inches Magnification: 1 Adjustment Click Value: 1 MOA Warranty: Sig Sauer Electro Optics Infinite Guarantee Battery Type: CR2032 Reticle Color: Red Housing Material: Aluminum

categories:GunsSporting Goods

4863 impressions

422 views

Brand new Sealed in original package Description: 3 MOA Red-Dot with Adjustable Brightness MOTAC: Motion-Activated Illumination 1x Magnification/30mm Clear Aperture Fully Multi-Coated / Aspheric Lens 100 MOA Windage & Elevation / 1 MOA IPC CNC-Machined Magnesium Housing TruHold Lockless Zeroing System Waterproof, IPX7-Rated Picatinny & KeyMod Mounts Made in the USA Sig Sauer engineered the ROMEO1 1×30 Open Reflex Sight to enhance your firearm’s aiming capabilities. Its 3-MOA holographic illuminated reticle offers a brilliant red dot with adjustable brightness and Motion-Activated Illumination System (MOTAC). You will see your targets with clarity thanks to a specially-designed, aspherical lens that generates flat and distortion-free images. To enhance transmission of light and to eliminate glare, the lens is also treated with high-performance full multi-coatings. To account for wind and ballistics, the windage and elevation adjusters offer 100 MOA ranges with 1 MOA increments. Designed to endure the toughest battlefield conditions, this sight is packaged into a compact, durable, lightweight, and waterproof housing. To increase durability, the housing was CNC-machined from a single piece of magnesium. Another highlight of the construction is a TruHold twin-spring adjustment system. It is designed and endurance-tested to withstand handgun recoil, deliver lock-less zeroing performance, and to return to zero with impeccable repeatability. Reticle: Red-Dot reticle: 3 MOA 1 MOA impact point correction 100 MOA windage and elevation adjustment range MOTAC: Motion-Activated Illumination Optical Performance: Magnification: 1x Molded glass aspheric lens High-performance coatings Unlimited eye relief Mounting Compatibility: Picatinny rails KeyMod panels Construction: CNC-machined magnesium body TruHold twin adjustment springs ensure a lock-less zeroing and repeatability Waterproof and fogproof Shock-resistant $520 shipped Not interested in trade Thanks

categories:Guns

15297 impressions

1536 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

3947 impressions

443 views

Brand new XT™ Rail Panels offer low-profile 1913 Picatinny rail coverage. The semi-rubbery material offers improved control and rail protection. Easily cut for custom lengths, sections can mount next to each other to form a visually continuous cover. Each panel fits one side of a carbine-length rail.  One panel per package.

categories:GunsSporting Goods

1581 impressions

325 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2493 impressions

421 views

BNIB HBI-10237-01 Buyers pay the shipping, contact me for an estimate. CZ Bren 2 Handguard 13.8″ M-Lok (GEN 2) The HBI 13.8″ handguard for the Bren 2 MS is ideal for 14″ barrel models in both 556/223 and 7.62×39 calibers. Our 13.8″ handguards are designed to truly “free float” the barrel and provide the operator with over 3x the support hand area and over 7x the M-Lok positions as compared to the factory Bren 2 MS handguard. PEQ-15/ATPIAL type IR sight systems and peripheral switches are easily mounted out front above your support hand thanks to a full length continuous 1913/picatinny top rail. Our extended Bren 2 MS handguards feature a window at the gas block that has been carefully designed to allow operator access to gas system adjustments while in use. The gas block window is bridged with a removable 1913 plate. With the 1913 plate removed, the gas block and regulator are exposed for complete disassembly and cleaning. This two piece design allows access to the gas system without having to remove the handguard shroud from the weapon. Additionally, the use of two countersunk screws to secure the 1913 plate means that sighting systems mounted the to 1913 plate WILL retain zero when the plate is removed/reinstalled after cleaning. Every handguard includes an integrated QD mounting plate system for seamless sling integration on either the left or right side. Additionally, we are proud to offer a direct mount light variant compatible with Surefire® 300/600, StreamLight® Protac Rail, Modlite 18650 series, and other popular bodies. The simple and robust mounting design replaces a single M-Lok position with body specific mounting geometry for weapon lights. This light mounting solution offers the simplest, lowest profile, lightest weight, and arguably most rigid light body integration at no additional cost. If your application requires a weapon light, you might want to consider this option. Features 13.8″ M-Lok Handguards for the CZ Bren 2 MS Gen 2 Two Piece Design With Direct Access to Gas Regulator M-Lok Accessory Interface, Full Length 1913 Top Rail QD Mounting Plate Included Optional Direct Mount Light Geometry for select Surefire® and StreamLight® Bodies Total Weight Installed is 12.04 oz (Factory Bren 2 MS Pistol Handguard is 10.27oz) Machined Aluminum 6061, Anodized MIL-A-8625 Type 3 Hard Coat Multiple Patents Pending Designed and Manufactured completely in USA. 922r Compliant.

categories:Guns

8243 impressions

562 views

These are dummy cartridges, shells, assorted projectiles and a couple of dulled arrow heads that I once used for hunter education but no longer required. Some are commercially made (shotgun shells, rimfire ammo and chemically coloured cases) and others were made by me. There is no powder or any primers located in the dummy ammunition. If you teach CFSC in Ontario, most of the brass cases will have to have holes drilled in them to meet FSESO standards for dummy ammunition. $50 for all dummy ammo plus actual shipping. They were stored in a tackle box, if you want it will be an additional $10. The fine print: First "I'll take it" gets the item. I accept EMT and actual shipping charges will be based on Canada Post's shipping calculator. Not interested in trades or offers. YES shipping is expensive and I am not looking for offers of $xx shipped

categories:Guns

1982 impressions

246 views

Once fired brass 29 brass and 38 nickel plated brass, shipping available canada wide by canada post, please text me if interested. Open for offers

categories:Guns

3290 impressions

347 views

Up for sale is a brand new / never fired KM Tactical aftermarket optic-ready complete Glock upper assembly in FDE. It'll fit your standard gen2, gen3 and gen4 G17/G22 frames. Pick up for free in Montreal or in Ottawa RESTRICTED PAL REQUIRED. I know it's not legally required, it's required for my peace of mind. Tracked and insured shipping to anywhere in Canada: 50$ Send inquiries or offers to glockguy87@hotmail.com for quicker response.

categories:GunsSporting Goods

11341 impressions

1494 views

Selling my ar trigger it’s pull is adjustable from 1.5 - 4lb it’s in new shape never used these are known to be the best on the market and rare due to its Color. I need to sell to pay off some bills if you have any questions contact me. Specs are down below. 902 956 3027 Specs Short Two-Stage Action, designed to feel like a 1911 Zero creep Overtravel: less than 0.015" Reset: less than 0.030" Reset Feel: Tactile mid-force Full hammer strike force; not affected by trigger weight 7075 anodized aluminum housing 440C stainless steel functional components Made in Canada! Manufacturer offers 30 days satisfaction guarantee and lifetime warranty

categories:Guns

2161 impressions

162 views

looking to trade this Remington 870 w/ Wilson combat +2 extension. Please message trade offers. I’m pretty open. Firearms? Ammo (556, 45 acp, 762x39)? Cash price is $450

categories:Guns

2252 impressions

202 views

Cooey model 75 .22lr great condition all original un-molested great bore & rifling accurate reliable factory iron sights crisp trigger pull FAC required buyer pays postage no trades no offers message through TOWN POST

categories:Guns

6935 impressions

273 views