Please text anytime 6476871484. Fully functional double action revolver in perfect like new condition. No PAL required. Ammo is available but sold separately. Comes with FRT paperwork. Swiss M1882 Service Revolver, 7.5mm/ 32 S&W Swiss Ordnance The Swiss Service Revolver of 1882 was a modification of the Nagant revolver in use since 1878. It was modified by Swiss Colonel Rudolf Schmidt. It employs the Georges Abati cylinder advance system, by which the cylinder can be advanced without raising the hammer when the loading gate is open. This allows the shooter to load and unload the cylinder quickly, without having to touch the hammer. The gun is of typical Swiss quality, with clock-like precision.​ This one is in very fine condition, as restored. The blue is intact. The markings and numbers are sharp. The serial numbers match. There are also several sub-assembly numbers visible. The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 4 1/2 inch barrel is good, with sharp rifling and no signs of use. The gun is chambered for the Swiss 7.5mm cartridge, but will accept a .32 S&W long/short as well. The brown plastic grips are excellent and undamaged. SN 2357, very fine as restored.

categories:GunsSporting Goods

9676 impressions

635 views

Please text anytime 6476871484. Fully functional double action revolver in perfect restored like new condition. No PAL required. Ammo is available but sold separately. This one can soot 3 factory loaded modern types of ammo including original 8mm, 7.5mm Nagant and 32S&W Tested with smokeless powder. Comes with FRT paperwork. French Model 1892 Service Revolver in 8mm lebel caliber, 4.5" barrel, 6 shot. Very well built and robust . Fiocchi manufacturers modern 8mm ammo as well. The action functions excellent in single and double action. Timing and lockup are good. Bore and cylinder walls are very good . Exterior is professionally nickeled . Grips are replaced with new weather resistant ones , lanyard ring is undamaged. Made in 1897. S/N 2167 The Model 1892 revolver (also known as the "Lebel revolver" and the "St. Etienne 8mm") is a French service revolver produced by Manufacture d'armes de Saint-Étienne as a replacement for the MAS 1873 revolver. It was the standard issue sidearm for officers in the French military during the First World War. The Modèle 1892 revolver is a solid frame revolver with the cylinder on a separate frame swinging right for manual reloading. The Modèle 1892 was first fielded in 1893 and was prominent among French military officers during First World War, and later the French police until the mid-1960s.

categories:GunsSporting Goods

18707 impressions

1139 views

For sale is a like-new Ruger-made Marlin Model 1894 lever-action rifle in .44 Rem. Mag. / .44 Spl. This model has a straight-grip checkered walnut stock/forend, with blued metal finish. It has a semi-buckhorn rear sight, with hooded front post. In addition, the receiver is drilled and tapped (from the factory) for mounting a scope. This rifle has the Beartooth Mercantile safety delete installed (the half-cock position safety still works). It is in excellent plus condition with very low round count!

categories:GunsSporting Goods

6854 impressions

291 views

Kimar 22 crimp blanks or 6 mm Blanks Revolver double action. 7 rounds Good for dog training or sport competitions Or props Swing out cylinder and wood style grips Made in Italy New in box

categories:GunsSporting Goods

5164 impressions

439 views

Very good 22 with pistol grip stock and detachable box magazine.Stock appears to be tiger stripped and in good condition.Bluing also good on this older Marlin.

categories:GunsSporting Goods

12539 impressions

804 views

Made in Germany. Really nice shape. All original and functions. Marked Veirnat.B.Suhl comes with factory open sights and redfield scope mounts (1"). Bores are excellent, slight pitting on surface. Trigger gaurd and pistol grip cap are made out of horn. This is a highend hand made firearm that goes way back to ww2. Can ship. Can trade. Located in edmonton.

categories:GunsSporting Goods

1270 impressions

75 views

For sale — complete rifle package (or available separately): Ruger American “Go Wild” — chambered in 7mm-08 installed in an MDT LSS-XL Gen2 chassis with a full set of upgrades. Excellent condition — <100 rounds through the barrel. Price includes shipping (domestic). Package price: $4,284 + tax (itemized below) Willing to sell rifle and scope separately: Rifle (complete) — $2,400; Scope — $1,250. Included / Itemized components & prices Ruger American 7mm-08 “Go Wild” (Bronze Cerakote) — $1,000 Bushnell Yardage Pro 4–12×42 with integrated rangefinder — $1,450 MDT LSS-XL Gen2 chassis — $620 MDT NV bridge — $150 MDT Pistol Grip Elite — $35 MDT 12-rd .308/7mm-08 magazines ×3 — $285 MDT +2 magazine baseplates ×3 — $54 MDT Carbine-to-Fixed-Stock Adapter — $60 MDT Oversized Bolt Knob — $35 Magpul PRS-Lite stock — $175 Magpul aluminum M-LOK Picatinny rail section — $30 Picatinny → Arca-Swiss adapter with integrated QD stud — $70 Vortex 20 MOA top rail — $170 3-chamber muzzle brake — ~$150 Upgraded trigger spring — ~2.0–2.5 lb pull (installed) Notes Rifle has been professionally maintained and is in excellent mechanical condition. Less than 100 rounds fired through the barrel. Photos and serial-number verification available on request for serious buyers. Shipping cost is included Open to reasonable trades with a F-class set up (prefer similar value) or offers of partial trade + cash (300wm, 308, 65cm, 65prc). 

categories:GunsSporting Goods

21109 impressions

1075 views

Brand new never fired gun in original box. Just out of box for taking pictures. Features Caliber: 7mm Remington Magnum Action: Bolt Capacity: 3+1 Finish: High Polished Blued Barrel: 24” Carbon Steel 1:9 25” Twist Length of Pull 13.5" Overall Length 44.5" Blind Internal Magazine X-Mark Pro Externally Adjustable Trigger Drilled and Tapped Receiver The rock-solid receiver is drilled and tapped for scope mounts and houses the externally adjustable X-Mark Pro Trigger 2 Position Safety Weight: 6.5 pounds C-Grade Walnut stock with Fleur de Lis Checkering & Hi-Gloss Finish Classic American Style Engraving and Gold Inlay Bronze Inlayed Commemorative Medallion Grip Cap Sling Swivel Studs Steel Floorplate Limited to Quantity of 2016 Special Serial Number New England Custom Sights Gun Custom Box Shipping and insurance available and on buyer. Open to trades with the same value

categories:GunsSporting Goods

55989 impressions

2417 views

Browning High Grade 1 of 5000 Commemorative Auto 5 12 Gauge Produced in Japan in 1984, with the engraving done in Belgium by Fabrique Nationale. Single nickel bead sight, 12 gauge with a 2 3/4" chamber. 28 inch vent rib barrel. Satin gray receiver, with photo-etched and engraved scrollwork, game scenes and John Browning. Fancy walnut round knob pistol grip stock, with dot-bordered checkering on the forearm and wrist, 14" pull and FN/ Browning buttplate. Pal is a must and will be verified. No trades, thanks. Price is firm. Shipping is only available on buyers expense. Serious inquires only please. If the ad is up, it is available. Will not respond to townpost messager.

categories:GunsSporting Goods

2893 impressions

192 views

Very nice case pair of Antique Remington 41 calibre rim fire Derringers. They are both in very good condition function as designed with good springs and trigger release. The grips appear to be pearl or bone I’m unsure but they in very good condition. I would prefer to sell as a set, but would consider offers for a single one as well.

categories:GunsSporting Goods

5013 impressions

307 views

Tikka T3X 6.5 Creedmoor Varmint, Cadex Defence Chassis System, Apex Rival Rifle scope 4-32x56, MDT Handle Grip, with bipod and muzzle break. ATRS scope rings 34mm. Magazine not included

categories:GunsSporting Goods

89272 impressions

4719 views

Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g

categories:GunsSporting Goods

77975 impressions

2342 views

Savage Elite Precision 300 win mag All accessories are not included No trade Description The 110 Elite Precision is the pinnacle of the Savage’s 110 designs. They’ve begun with the time tested Model 110 action and then rethought every aspect of the rifle. The overhaul includes all of the upgrades demanding shooters make to their long range tack drivers. The 110 Elite Precision has an Adjustable Core Competition chassis from Modular Driven Technologies (MDT). From its full length ARCA rail to its titanium nitride coatings, this is a rifle built for a lifetime of Elite Precision. FEATURES * Savage factory blueprinted action * MDT ACC aluminum chassis with fully adjustable stock * ARCA Rail along the entire length of the chassis * Stainless steel, flash nitride target receiver * Titanium Nitride bolt body * 1.5 – 4 lb user adjustable AccuTrigger * Self timing taper aligned muzzlebrake (Short Action Calibers Only) * MDT Vertical Grip and AICS magazine * Modified Palma contour barrel * 1-Piece 20MOA Rail Action: Bolt Ejection Port: Right Barrel Color: Natural Barrel Finish: Matte Barrel Length (in)/(cm): 30 / 76.200 Barrel Material: Stainless Steel Caliber: 300 WIN MAG Magazine Quantity: 1 Magazine Capacity: 5 Hand: Right Length of Pull (in)/(cm): 14-15.5 / 35.560 Magazine: Detachable Box Magazine Overall Length (in)/(cm): 49.75-50.7 / 126.365 Rate of Twist (in): 1 in 10 Receiver Color: Black Receiver Finish: Matte Receiver Material: Stainless Steel Type: Centerfire Stock Color: Grey Stock Finish: CeraKote Stock Type: Chassis Weight (lb)/(kg): 14.95 / 6.78

categories:GunsSporting Goods

83961 impressions

4799 views

MDT Vertical Grip Premier

categories:GunsSporting Goods

22586 impressions

622 views

Description The Sako 85 Finnlight rifle is for those who foray deep into the wild to reach their goal. Hunters on mountain trails or on long-distance treks prefer high-performance rifles that are full-sized, yet still lightweight. The fluted barrel of the Finnlight is just one of the many features that make it ideal for the hunter seeking a perfectly trimmed light rifle. The Sako 85 Finnlight is also an excellent choice for women and younger shooters. SPECIAL FEATURES BARREL The specially engineered fluted barrel of the Sako 85 Finnlight reduces rifle weight and also accelerates the barrel cooling. STOCK Sako 85 Finnlight has a reinforced black polymer stock with a soft grey pattern on its grip surfaces and a Soft Touch surface treatment. ACTION Sako 85 actions come in six different sizes (CSA), providing reliable functioning for each caliber. All Sako 85 models feature controlled cartridge feed (RCS) to eliminate double feed or cartridge jams. The turn-bolt handle places the hand in a natural position during bolt operation, which allows for rapid repeated firing. BARREL Sako 85 barrels are manufactured with a passion for craftsmanship and the very best knowledge of Sako. Barrel blanks are drilled, honed, cold- hammer forged, finished and finally individually inspected by an optical fine-tuning instrument: the human eye. Twist rates are chosen for each caliber to optimize accuracy and bullet performance. Sako 85 barrels, blued or stainless, have a non-reflecting, satin-like surface – with the exception of the Sako 85 Deluxe and Safari models that have a highly polished finish. MAGAZINE The staggered, two-row magazine of the Sako 85 is made of stainless steel. The detachable magazine can also be loaded through the ejection port. The Total Control Latch (patent pending) of the Sako 85 prevents accidental magazine release. SAFETY The special two-way Sako safety locks both the trigger and the bolt handle. The unique bolt release button of the Sako Safety System allows you to load or remove a cartridge from the chamber while the safety is engaged. SIGHTS Most of the Sako 85 models with a blued finish on the barrel are available with either standard or optional adjustable iron sights. The front bead is adjustable in elevation and the rear blade in windage. STOCK The ergonomics of Sako 85’s walnut and synthetic stocks are built for an optimal shooting posture. The excellent balance and smooth bolt operation of Sako 85 rifles enable fast, straight and accurate operation. TRIGGER The weight of pull of the single- stage Sako 85 trigger unit is adjustable from 1 to 2 kg (2–4 lbs). An optional single-set trigger is available for most Sako 85 models. All Sako 85 rifles have an extremely durable, all-steel trigger guard that protects the trigger. An exception to this are the Finnlight and Carbonlight models, which have a lightweight hard-anodized aluminium trigger guard. *NO HOLDS **Accepted method via Email transfer & cash *** gently USED hunting firearm from my safe. I've used this firearm on a number of hunts in the last two years. It is a well maintained firearm that equipped Sako opilok rings and a Vortex Viper 3-9x40 scope plus a Sako sling. I can deliver to Saskatoon area ONLY

categories:GunsSporting Goods

10586 impressions

326 views

Hogue Grips for Walther P-5

categories:GunsSporting Goods

23581 impressions

496 views

Brand new in box unfired Browning BLR PISTOL GRIP WALNUT STAINLESS 3006. Selling for 2500, plus shipping.  No trades

categories:GunsSporting Goods

2031 impressions

169 views

Original Brazilian Mauser M1908 WW1 Bayonet by W K & CIE Solingen Germany with Scabbard and Frog Used with the 7mm Brazilian Mauser Model 1908 The blade is marked W.K.&Cie Solingen. The Guard and Scabbard hook are stamped with matching serial numbers, M935. There is a B stamped on the left side of the pommel as well as on the back of the blade just in front of the guard. These are the Brazilian Inspector Proofs. The Release Button works as designed. Overall Length – with blade in scabbard - 17 ¾” Length of Grip including the Guard – 5 1/4” Blade Length –11 ¾” $200.00 Thanks, Phil

categories:GunsSporting Goods

16050 impressions

455 views

SOLD PENDING FUNDS____Browning Silver Rifled Deer Ovix camo Semi-Auto Shotgun,22" barrel.3" chamber,Versatile Browning Ovix camo, Durable stock and forearm with textured gripping surfaces,Thick-walled, rifled barrel for slug and sabot ammunition, Cantilever Weaver style scope mount. Ideal for deer, bear and boar. Mint, as new.Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Valid Pal a Must and will be verified for reference number. Please send message to: medal1958@gmail.com

categories:GunsSporting Goods

6456 impressions

356 views

Wow, here is an opportunity to own something truly unique. Overall condition, very good.  Make: MFG FRANCAIS D'ARMES & CYCLES DE ST ETIENNE Model: Joesph Dumonthier Cane Gun Caliber: 9MM FLOBERT RF (have ammunition 50 birdshot, 50 bullets.)  Bore: Very Good, Shiny Comes With: Brass and Lead Muzzle Cover, Steel Butt Stock Action: Single Shot Rimfire Cane Gun  No sights, brown tapered steel barrel, engraved blued receiver, smooth curved horn grip, removable brass plug which allows threaded blued steel shoulder stock to be attached. Metal finish shows some scratches, handling marks and wear. Grip shows some marks, scratches and wear.  Barrel Length: 31"  Serial: 18921 Canadian Antique, No PAL Required Can ship anywhere in Canada, Please see my other ads for rare and collectible, firearms and accessories.

categories:GunsSporting Goods

5866 impressions

248 views

Cal. 30-06. Serial# 4798918. Bbl.24". Marked behind front sight "SC" with a flaming bomb and "10-43." Aperture rear sight graduated to 800 yards. Blade front sight. Swept bolt marked on top of handle "B2" and marking underneath appears as "F." Safety lug is Remington style, as is the bolt shroud. All stamped furniture, including large bow triggerguard and fine checkered trap buttplate. Walnut stock set with two recoil bolts. The grip is marked underneath with encircled "P" proof. Assembly marks are visible ahead of the trigger guard. CONDITION: stock set has a and bruises in its appearance commensurate with extensive service. There are numerous handling marks. The metal retains its original finish with some thinning and wear. Very good, shiny 4-groove bore. also comes with a leather combat sling. Can ship anywhere in Canada, Please see my other ads for rare firearms, accessories, and ammunition.

categories:GunsSporting Goods

20313 impressions

478 views