For sale is a brand new Browning Maxus II semi-auto (gas-operated) shotgun. It is the 'Wicked Wing' (burnt-bronze cerakote) edition, with Mossy Oak camo. It is a 12 gauge model, with 3" chamber, and 26" barrel (rare). It has a raised (& ventilated) top rib (w/ red fiber optic front & white mid bead). It has rubber over-molded stock/forend grips. It has the Browning 'Inflex' interchangeable recoil pad. This model also has the magazine cut-off switch. It comes with 3× Browning Invector Plus "Goose-Band" extended chokes (F, M, IC). The factory take-down hard case, and all other original accessories (owner's manual, warranty card, cable lock, choke removal key, stock spacers & shims etc.) are included as well! It is in excellent plus condition, and has never been fired! It is the perfect shotgun for waterfowl hunting due to the rust proof finish! P.S. this shotgun retails for $2,750 + Tax (i.e., over $3,100 new). Save yourself over $600 dollars on a brand new shotgun!

categories:GunsSporting Goods

16784 impressions

548 views

Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Ammo is available but sold separately. This one can soot 3 factory loaded modern types of ammo including original 8mm, 7.5mm Nagant and 32S&W Tested with smokeless powder. Comes with FRT paperwork. French Model 1892 Service Revolver in 8mm lebel caliber, 4.5" barrel, 6 shot. Very well built and robust . Fiocchi manufacturers modern 8mm ammo as well. The action functions excellent in single and double action. Timing and lockup are very good. Lanyard ring is undamaged. The gun is in excellent condition, with 99% of the arsenal blue intact. There is no surface pitting. The markings are sharp and complete. The action is tight and accurate, and the cylinder indexes and locks properly with no play. The bore of the 4 1/2 inch barrel is excellent and bright. The rifling is sharp and uninterrupted. The walnut grips are very good and undamaged, showing no wear. SN G10123, dated 1897. The Model 1892 revolver (also known as the "Lebel revolver" and the "St. Etienne 8mm") is a French service revolver produced by Manufacture d'armes de Saint-Étienne as a replacement for the MAS 1873 revolver. It was the standard issue sidearm for officers in the French military during the First World War. The Modèle 1892 revolver is a solid frame revolver with the cylinder on a separate frame swinging right for manual reloading. The Modèle 1892 was first fielded in 1893 and was prominent among French military officers during First World War, and later the French police until the mid-1960s.

categories:GunsSporting Goods

3763 impressions

194 views

Please text anytime 6476871484. Fully functional antique revolver in perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44 Double Action "First Model", .44 Russian This one is in very good condition. With original finish remains, the markings are well visible. The action is strong and accurate, and the cylinder indexes and locks properly. There is minimal side-to-side movement. The bore of the 6 inch barrel is very good, with strong rifling and little signs of wear and use. The original wooden grips are very good and undamaged. There is no wear visible. The front sight has been upgraded with a German silver blade for better accuracy. SN 12499, very good overall.​ History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped for the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

4303 impressions

230 views

Please text anytime 6476871484. Fully functional double action revolver in perfect like new condition. Tasted with modern smokeless powder ammo shown on the last picture. No PAL required. Ammo is available but sold separately. Comes with FRT paperwork. Husqvarna-Made Nagant M1887 Swedish Service Revolver, 7.5mm Nagant or .32 S&W long/short This is one of the first 350 M1887's made at the Husqvarna factory in 1897. These were made under contract to Norway before Husqvarna started domestic production in 1898. It is in excellent like new condition, with the original arsenal blue intact. The straw colors on the loading gate spring, hammer and trigger are well visible. The action is crisp and strong, and the cylinder indexes and locks properly, without play. The bore of the 4 1/2 inch barrel is excellent and mirror bright, with sharp rifling and no signs of pitting or wear at all. The walnut grips are excellent and undamaged, showing no signs of use. SN 293, excellent overall.

categories:GunsSporting Goods

3002 impressions

157 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44 New Model No. 3 Top Break, .44 Special / Russian Revolver. This one is in very good condition with longer 1 9/16 cylinder and can shoot both .44 Special and 44 Russian ammo. The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 5 inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid. Extractor works as it should. SN 10682, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favor of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

5661 impressions

612 views

Please text anytime 6476871484. Fully functional double and single action revolver in perfect condition. Compact pocket revolver high quality and can fit in the palm of your hand.. No PAL required. Comes with FRT paperwork. Belgian "British Bulldog", .44 Webley CF Revolver and the cylinder compatible with 44 Russian. This one is in excellent condition. The nickel plating is intact with no flaking. The gun is marked "44" on the side. The cylinder shows the pre-1893 Belgian proof mark and post 1878 inspection marks. There are the initial "MV" stamped on the frame, which the mark of the foundry. The action is accurate and strong, and the cylinder indexes and locks properly without play. The bore of the 2 1/2-inch barrel is excellent and bright, with sharp rifling. The walnut grips are excellent and undamaged, with no wear. SN 5, excellent overall.

categories:GunsSporting Goods

6475 impressions

1065 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot condition ,very smooth action. No PAL needed. Can shoot 32rf long and short. Comes with FRT RCMP paperwork. Smith and Wesson No. 2 "Old Model Army", .32 RF Revolver This one is in very good condition. With original blue. The action is strong and accurate, and the cylinder indexes and locks properly without play. The bore of the 5-inch barrel is very good, with sharp rifling and mirror bright. The rosewood grips are very good and undamaged. They look like they may have been re-varnished once. SN 59474, very good overall. History & Background Horace Smith and Daniel Baird Wesson acquired Rollin White’s patent (1855) for the bored-through cylinder to manufacture what they originally called the No. 1 revolver in .22 rim fire. It proved to be a rather ineffective little pocket revolver but was nonetheless very popular with civilians as a personal protective weapon. In 1861, just as the civil war gained momentum, S&W decided that they needed a larger caliber revolver in order to be able to convince the buying public (many of them enlisted in the war) that their gun was a viable protective option and as a back-up gun in battle. The scaled-up design was duly named the No. 2 and was nicknamed the “Army”, as it was widely used by military personnel as a personal side arm. Smith & Wesson retained and defended the Rollin White patent aggressively throughout the civil war period, and until its expiry in 1870, and therefore the No. 2 “Army” would be the only American made cartridge revolver used during this conflict (although several “unlicensed” makers added their wares into the fray, such as Uhlinger, Pond and Moore). The model is called “Old Model” due to its frame shape – the square butt and octagonal barrel of the model 1 ½ First Issue, as compared to the bird’s head grip and round barrel of the Second Issue. There is no “New Model” Army. The "No. 2 Old Model" was a popular personal side arm of many officers in the Union forces during the American Civil War, and is also known as the "Army" model. It was first introduced in 1861, and made until about 1874. The "No. 2" refers to the frame size, "No. 1" having been the first, .22 caliber pocket revolver and the "No. 3"'s being the large-frame revolvers. The 1 1/2 was introduced after the number 2, and since it fits in between the no. 1 and no. 2, it was named the no. 1 1/2. The no. 2 was owned by such famous Americans as General George Armstrong Custer and "Wild Bill" Hickok, the marshal of Deadwood...

categories:GunsSporting Goods

13202 impressions

448 views

Pachmayr Grip (Presentation) for S&W $40.00 Pachmayr Grip (Gripper) for S&W $40.00 Take both for $60.00 Payment by cash at pickup. No other means accepted!

categories:GunsSporting Goods

2318 impressions

176 views

Forehand & Wadsworth Terror Model in 32 Rimfire, 3" barrel, 6 shot capacity. F&W was known for their unique model names and "Terror" was no exception! The action functions well on this piece. Half and full cock work well. Timing and lockup are good. Bore and cylinder walls show wear common to a vintage 32rf. Exterior shows scattered surface rust that would clean up. Original grips show expected wear, right panel has 2 notches. Cylinder pin release works well. HAS BEEN TEST FIRED! Shoots well. 32 Rimfire is easy to reload for with minimal tools. Antique status in Canada, no PAL required to purchase or own. Will include an RCMP FRT printout showing antique status in Canada. $500 includes Free Shipping. If you have any questions or need more pictures or video please feel free to ask.

categories:GunsSporting Goods

910 impressions

80 views

Hogue Monogrip revolver stock Features: Original one-piece MONOGRIP design eliminates side screws and loose shifting panels. Hogue's famed orthopaedic hand shape with finger grooves and compound palm swells. Fully relieved for all speedloaders. Cobblestone texture provides an efficient non-slip, non irritating stippling pattern. Hogue rubber Monogrips feel soft and resilient in your hand, yet are moulded with a reinforcing insert directly engaging with the gun frame to a rock solid grip-to-frame fit. Moulded from modern durable rubber which is virtually impervious to all oils and solvents found around firearms. Demo video: https://youtu.be/cEC1pVFRRuk Installation video: https://youtu.be/OhN3ByfnDM8 Pickup GTA Ship on buyer

categories:GunsSporting Goods

2322 impressions

240 views

Very nice original condition Merwin and Hulbert seven shot revolver, this revolver is chambered in 32 H&R caliber. This revolver still retains over 95% of the original nickel finish, the two piece hard rubber grips are original and in excellent condition with no chips or cracks. it also features a folding hammer, and is in excellent mechanical condition with perfect timing and lock up. This is an antique and you do not require a PAL to purchase it. comes with RCMP,FRT document.

categories:GunsSporting Goods

27405 impressions

1165 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

12341 impressions

433 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

11526 impressions

661 views

Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

12256 impressions

373 views

Beretta 92F competition conversion kit 92f 9mm With 7 1/4 “ competition long barrel with wood Grips Case , tools , and adjustable sights The hard sided case is lockable with space For your pistol extra barrel and magazines New Unfired Pal required

categories:GunsSporting Goods

22454 impressions

1120 views

Like new Mauser M18 30-06 synthetic stock with rubber inlay grips. Comes with vortex viper 3-9x40 Mounted in Vortex mount on leupold one piece rail. 22" barrel. Detachable magazine. Pal required

categories:GunsSporting Goods

79150 impressions

5205 views

one pair of beatifully striated LEFT hand target grips to fit beretta 92 and clones and 1 set of mahogony and 1set of walnut grips to fit 1911a's and clones $50 for lefthand [cost me $85us ] and $20 each for the 1911 's all have not been used removed when sold NO texts 825 760 4289

categories:GunsSporting Goods

18030 impressions

401 views

Reluctantly, I'm selling a highly collectible and uncommon Smith and Wesson 1st. Mod. Double Action in .44 Russian. Obviously, given its age it's a re-blue but beautifully and professionally done. It has genuine stag horn aftermarket grips. Most importantly, the mechanics are excellent in all functions; timing, advance, lock-up, half-cock, single & double action, and ejection. The bore and chambers are exceptionally nice with only the faintest traces of use and the rifling is strong. It comes with a vintage belt holster as pictured.

categories:GunsSporting Goods

1266 impressions

148 views

Dlask 1911 ebony wood grips government size

categories:GunsSporting Goods

1174 impressions

98 views

Dlask 1911 Rosewood grips government size

categories:GunsSporting Goods

1151 impressions

89 views

Dlask camo laminate 1911 grips government size

categories:GunsSporting Goods

1140 impressions

109 views