1500.00 - Browning Medallion 7mm Rem. Mag; 26'' barrel with Boss. With Boss you can adjust to shoot any bullet accurately and reduces recoil. Some minor scoff marks on stock. Shoots the HSM 168gr. at 3140 f/s and about 2'' group at 300 yds. Also have drop chart to 800 yds. Second magazine and reloading RCBS dies. 1200.00 - Bushnell tactical 4.5 x 30 x 50mm with side focus. Scope set for 250 yds. and tactical dial up to 800yds. 810.00 - 119 rds. - HSM 168gr. Berger bullets. 50.00 - 20 rds. - Federal Premium 150gr. boat tail soft point. 40.00 - 19 rds. - Federal Power Shok 145gr. Speer Grand Slam No message. Emails only!

categories:GunsSporting Goods

73930 impressions

2169 views

Winchester 450 Marlin unfired 16 1/2 inch barrel ported pistol grip and side hammer3500.00 faster velocity than 45,70 unfired.

categories:GunsSporting Goods

78216 impressions

5184 views

1910 Carl gustafs 6.5x55 Swede mauser SN 262063 partially matching, reciever and bolt matches. Near full furniture (missing the armoury dial as seen in picture of right side. Light to moderate wear on wood, it is over 100 years old, crest is in very good sharp condition. Barrel, receiver, and bolt has not been reblued floor plate, and trigger assembly looks like it has been reblued. stock has not been sanded. Metal stamps are sharp with Swede crowns populating the bolt, barrel, sights and receiver.

categories:GunsSporting Goods

15743 impressions

695 views

I have a Iver Johnsons Champion 16 gauge single shot for sale. Arms and Cycles works (Canada) LTD- Montreal Made in oobourg. (choke bore, Barrel and lug forged in one) 30 inch barrel. Gun is in good working order. locking release spring worn and has to be locked manually. Stock has very nice hand made wood burning on fore end and left side butt stock picture of elk. All hand made.  open to trades, Located in evansburg but make frequent trips to spruce grove .

categories:GunsSporting Goods

65824 impressions

3182 views

Beretta 687 EL Field Silver Side Plates 12 gauge 28” Barrels Deluxe wood With Fixed Chocks Modified and Full Collectors model With case Unfired New Beretta

categories:GunsSporting Goods

36034 impressions

1374 views

Crusader Arms PND pump 5.56 nato/223 rem caliber 18.6” barrel Manually operated , integrated pump and Side action rifle for sporting and hunting Applications Non restricted Capacity 5 rd crusader mags Compatible with crusader PND & Crypto mags Compatible with 20 rds Black Creek Labs

categories:GunsSporting Goods

8155 impressions

645 views

Beretta 687 EL Field Silver side plates 20 gauge 28” barrels with 5 removable Briley chocks Light weight 20 gauge shotgun !! Deluxe wood and comes with Beretta gun case No trades

categories:GunsSporting Goods

44546 impressions

1907 views

Prices A- Double Tap Trigger Over Travel Limiter - $20 B - Aperture Ghost Ring Sights Set - $20 C/D - Extended Magazine Release (Right and Left Handed) - $25 **$5 off each additional part for any order combo (2 or more) **Ex. A+B=$35-($5 discount)=$30 Total **A+B+C=$20+$20+$25=$65-2*($5 discount)=$55 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) Double Tap Trigger Over Travel Limiter - $20 Replaces the Factory Trigger Spring Plunger Reduce the Over Travel by 85% for Quick and easy "Double Taps" Machined Stainless Steel Aperture Ghost Ring Sights Set - $20 Replaces the Factory Open Sights Comes in a Set of Two (Large/Small Apertures) 1x Plinking Aperture Rear Sight Plate 0.125" (3.2mm) 1x Target Aperture Rear Sight Plate 0.063" (1.6mm) Material: Precision Machined Stainless Steel Finish: Matte Black Oxide (Blued) Weight: 0.02oz (0.4g) **Not compatible with Aftermarket, Fiberoptic, TruGlo, Hiviz, or Rear Sights with the Single Screw Design. See image attached** *Screws not included. Must use original screw(s) provided by Ruger or source new screws.* Extended Magazine Release (Right and Left Handed) - $25 Replaces the Factory Magazine Release No Snag Design (Tab only on one side) Ergonomic Quick Index Finger Mag Release Compatible with the Charger Pistol Material: Precision Machined Aluminum Finish: Matte Black Anodize Weight: 0.56oz (16g) **Not compatible with older Metal Trigger Groups** **Mag Release does not fit certain aftermarket Archangel Stocks**

categories:GunsSporting Goods

52745 impressions

2289 views

Stoeger side-by-side Coach Gun in 12-gauge — classic break-action double-barrel with a straightforward, reliable design. A great choice for classic field use, ranch/coach work, or as a gentleman’s scattergun for drives and clays. Condition & cosmetic notes: the stock has visible scratches caused by a belt buckle while hunting (see photos). The marks are cosmetic only and do not affect structural integrity of the wood. Notes for buyers: Buyer must comply with all provincial/federal firearms transfer laws and present a valid firearms licence. Please text or email for additional information/pictures. No Trades. Shotgun is located in North Battleford. I regularly travel between Calgary, Edmonton, Red Deer and Saskatoon and can meet at a mutually convenient midpoint. If any of those cities work for you I can arrange to meet there or somewhere in between along the route. Please suggest a location and time and I’ll do my best to accommodate.

categories:GunsSporting Goods

5191 impressions

397 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:GunsSporting Goods

6750 impressions

252 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5143 impressions

172 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

11651 impressions

520 views

Many Czech produced post-war Mausers were made with mostly late war and some newly produced parts. These were sold to various different militaries and on the commercial market many and of these were sold to the Israelis as well. The rifle features many late war stamped parts including the oversized winter trigger guard but does include a half size cleaning rod unlike the Kriegsmodell K98's produced by the Germans. It does not have a stock disk, as it just has a hole drilled in the butt cap for disassembly of the bolt. This particular example has a low serial number, but the serial number ranges are all over because of different contracts. The whole gun matches with the new forced match serial number. It has a scrubbed receiver, and has a beech wood stock and handguard in a nice brown color. The rifle bore is actually in very good shape, but there is some stubborn fouling stuck in there and I don't have a 32 Caliber cleaning brush to remove it but I'm sure if you use the proper brush it should come out pretty easy since it's not rust. Just shooting the rifle might even remove it. The muzzle crown is an excellent condition as pictured. The rifle does have minor some stock damage. It looks like a vice dent or some sort of hammering pattern, but it's only on the one side (pictured). Overall the gun is in very good original condition and the action is nice and smooth and it is unfired by me. This is a nice unique example of a k98 made by Brno, who is very well known for their quality produced firearms. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:GunsSporting Goods

9892 impressions

640 views

Hard to find especially in such excellent condition, bluing 99.9%, stock has a few surface minor dings but no cracks. Rifling clean bright and vivid. Drilled and tapped. 24 inch barrel, appears all original. Top feed. serial number 40425X, with "30" stamped in Left side nearest receiver. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:GunsSporting Goods

61869 impressions

2099 views

Winchester Model 94 125th Anniversary High Grade Rifle 30-30 Win Brand new in box. Factory fired only. 24 inch barrel. Special Limited Edition - Celebrate by giving your self the greatest lever action in history. Hand-chased engraved, nickel finish receiver, gloss blued, button rifled, full octagon barrel, grade III/IV Walnut, spade checkering It is really quite remarkable what can be accomplished by an artist when working with a Model 94 Winchester canvas. Compelling? Remarkable? Classic? Exquisite? Timeless? Mysterious? The answer is all of the above. The best and most revered lever action of all time can be yours in a special 125th Anniversary High Grade version. Let's face it, you missed your chance to buy one in 1894, but there is still time to get a new one of these very special rifles. Very limited numbers remain. RECEIVER – Steel; Nickel finish; Hand-chased engraving on both side of the receiver; Drilled and tapped for scope mounts BARREL – Gloss blued finish; Button rifled, Full octagon; Special barrel marking ACTION – Lever-action; Top tang safety STOCK – Grade III/IV Walnut; Spade checkering FEATURES – Drilled and tapped hammer for hammer spur extension (included) Pal is a must and will be verified. No trades, thanks. Price is firm. Shipping is only available on buyers expense. Serious inquires only please.

categories:GunsSporting Goods

70950 impressions

1572 views

Selling - gently used Athlon Neos 4-12 x40 BDC scope. Loaded with features including side focus, an adjustable objective, .025" MOA adjustments, one inch tube, matte finish and more. Complete with the original box, owner's manual, lens covers and a sunshade. This scope retails or over three hundred and fifty dollars, plus tax on Amazon. Buy it here and save big . * Reduced, now $245.00 with twenty dollar shipping. * Sorry, no trades. E-transfer preferred. I HAVE THREE OTHER SCOPES LISTED IF THIS ONE DOES NOT APPEAL TO YOU.

categories:GunsSporting Goods

9562 impressions

660 views

Fits barrel diameter up to 1.070″ one and a half inches behind muzzle shoulder. Tuner brake combo, 2 great products in 1. Heavier tuner – With most match barrels being larger/heavier contour. Our tuner will be able to tune even the heaviest contour barrels with ease. Heavier tuners will find the optimal node within a revolution or 2. No more wondering if the tuner will work or not. Excellent balance for your PRS/NRL or positional shooting rifle – With the importance and trend of adding weights to rifles for balance. Our tuner puts the weight right where it matters, at the muzzle. Heavier tuner can add optimal balance to a thinner or shorter profile barrel. Designed with emphasis to stay on target, hybrid top and side port design prevents muzzle rise and assists target preservation. Features a proprietary linked port, effectively creating a double expansion chamber to distribute gasses laterally more efficiently and effectively. Gasses are deflected away from the user while providing maximum recoil reduction for all day shooting comfort on the range. Installs easily and can be self timed, a tensioning key is included to ensure solid lockup. Discreet leveling flat on the bottom, for those who desire to precision level their muzzle brake. Precision machined for exceptional fit and finish with a sleek gap free design. Shipping $20 Will consider trade for an MDT Gen 2 Send it Level

categories:GunsSporting Goods

21533 impressions

1057 views

Ad Title: Lakefield-Mossberg, Model 385BK, Cal. 20 2¾” & 3” Make : Lakefield-Mossberg, Made in Canada Model: 385KB Serial No: 953379 Type of action: Bolt Action Barrel length: 26 inches Caliber: 20GA 2¾ and 3 inch Note: Comes with an interchangeable choke and its magazine Condition: Good Operating Condition. The blue on barrel and action is about 80%. The bore is immaculate. The stock is not in too bad condition, but has lost part of its varnish. While I don’t see a crack in the stock, there is a copper pin from one side to the other side of the stock behind the action . This should be a good shotgun to hunt in the bush. Price: $165.00 Cdn Ref: 25A068 Shipping: $30 in Canada (Barrel and action separated from the stock for shipping) Basic Insurance: $125 included with all purchases Full insurance: Add 2% of the value of your purchase to get full coverage Payment: By E Transfer

categories:GunsSporting Goods

664 impressions

84 views

I accidentally bought 3 boxes of .300 Winchester short mag 180 grain. I got them at Cabelàs. I actually needed WMG instead. Too much in a hurry. can’t’ return them. Paid 99.99$ a box plus tax (315.00$) I want to sell all 3 for 275$. My loss your gain. Local pick up in St Albert area or willing to meet on the north side of Edmonton

categories:GunsSporting Goods

1789 impressions

73 views

Previous sale cancelled due to non payment.....Still 0ffering straight sided, paper patched ( .4035 to .4045 ) medium hardness 8/9 which were very accurate in my original 40-70 and 40-50 sharps rifles. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

10578 impressions

522 views

Magnificent rifle Antonio Zoli made in Italy. 30-06. With hard case, only used at the shooting range, 2- boxes.Bolt on the left side. In perfect condition, a magnificent beautiful wood . (New Hand forged knife. Skinner knife hardness 62. Handle Mammoth tusk blade Austrian steel Bohler. This is a bonus for those who buy AZ.).Browning carbon limited edition 7mm. Browning cenergy CX 12 gage. I would preferably want to sell everything together if the price would be higher separately. Super condition!!!! 9.9 from 10. All with boxes.

categories:GunsSporting Goods

141142 impressions

11114 views