The Browning Buck Mark URX Pellet Pistol air gun from Umarex Airguns utilizes a single stroke break barrel cocking mechanism that’s easy to operate even for smaller framed shooters..177 Caliber Pellet, Break Barrel Action, Spring Powered,320 FPS. Brand new. Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Must be 16+. Please send message to: medal1958@gmail.com

categories:GunsSporting Goods

16765 impressions

841 views

This is an interesting piece of Eastern Bloc history. A Polish Circle ⑪ FB Radom produced flare pistol. This flare gun is as new, I think it never shoots anything. These flare pistols feature all steel construction with synthetic grips. These are built tough to last thru years of rugged service. This 1966 pistol is a 26.5mm.   The flare gun ⑪ has an exposed hammer and a release trigger built under the actual trigger, this trigger opens up the flare pistol to remove spent shells or insert a new flare. There are flares made for 26.5mm flare pistols, but you can also use 12 Gage flares with the 12 G insert that is included. A black leather holster is included as well. No PAL needed, but You must be 18 years old or over to buy this flare gun. Price: $425 including FREE shipping Canada wide.   EMT is the best way to pay me.

categories:GunsSporting Goods

484 impressions

56 views

*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. These are brand new and unused. Several available. Rangeview Sports sells these for $51 + tax. My price = $40 223/5.56 crimped 10/20 round mags. Canadian compliant LAR-15 Pistol Magazine. Legally hold 10 rounds. Get yours while you still can. 410 Alloy Stainless. Steel Heat treated. Coated Black. The 10/20s mags offer benefits in terms of maneuverability and ergonomics, especially when shooting in prone or other shooting positions. $40 each. Will ship at buyer's expense but priority will be given to local sale in Calgary.

categories:GunsSporting Goods

37009 impressions

1457 views

21x13x2”. New in wrap. Great for customizing pistols, electronics, drones, tools or ammo. Firm price but would trade for ammo Leduc county

categories:GunsSporting Goods

4969 impressions

141 views

Winchester 450 Marlin unfired 16 1/2 inch barrel ported pistol grip and side hammer3500.00 faster velocity than 45,70 unfired.

categories:GunsSporting Goods

78214 impressions

5184 views

Have grips for Ruger revolvers, Mark series 22, Detonics factory rosewood (New), Derringer (German I believe), Hogue mono grip for S&W I believe and N frame S&W. Also grips to fit CZ 75/85 pistols with shipping extra.RUGER WOOD GRIPS AND SELF FINISHING GRIP HAVE BEEN SOLD Colt 1911 have colt logo and wood.

categories:GunsSporting Goods

29198 impressions

1707 views

Mossberg 500 Persuader 410 Gauge 18.5” barrel with pistol grip New in box

categories:GunsSporting Goods

1629 impressions

141 views

Benelli Super Nova tactical 12 gauge 14” barrel length With Collapsible pistol grip stock Ghost ring sights New in the box

categories:GunsSporting Goods

9702 impressions

704 views

Prices A- Double Tap Trigger Over Travel Limiter - $20 B - Aperture Ghost Ring Sights Set - $20 C/D - Extended Magazine Release (Right and Left Handed) - $25 **$5 off each additional part for any order combo (2 or more) **Ex. A+B=$35-($5 discount)=$30 Total **A+B+C=$20+$20+$25=$65-2*($5 discount)=$55 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) Double Tap Trigger Over Travel Limiter - $20 Replaces the Factory Trigger Spring Plunger Reduce the Over Travel by 85% for Quick and easy "Double Taps" Machined Stainless Steel Aperture Ghost Ring Sights Set - $20 Replaces the Factory Open Sights Comes in a Set of Two (Large/Small Apertures) 1x Plinking Aperture Rear Sight Plate 0.125" (3.2mm) 1x Target Aperture Rear Sight Plate 0.063" (1.6mm) Material: Precision Machined Stainless Steel Finish: Matte Black Oxide (Blued) Weight: 0.02oz (0.4g) **Not compatible with Aftermarket, Fiberoptic, TruGlo, Hiviz, or Rear Sights with the Single Screw Design. See image attached** *Screws not included. Must use original screw(s) provided by Ruger or source new screws.* Extended Magazine Release (Right and Left Handed) - $25 Replaces the Factory Magazine Release No Snag Design (Tab only on one side) Ergonomic Quick Index Finger Mag Release Compatible with the Charger Pistol Material: Precision Machined Aluminum Finish: Matte Black Anodize Weight: 0.56oz (16g) **Not compatible with older Metal Trigger Groups** **Mag Release does not fit certain aftermarket Archangel Stocks**

categories:GunsSporting Goods

52741 impressions

2289 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:GunsSporting Goods

6743 impressions

251 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5140 impressions

172 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5237 impressions

147 views

Top is the Civilian version Cooey Model 82 single shot bolt-action .22 caliber target rifle intended for use in training Cadets,and junior shooting clubs (I learned how to shoot with one of these 60 years when I was in boy scouts). This one has no military marks. Comes with web sling. $500.00 Bottom Cooey Model 82 was a single shot bolt-action .22 caliber target rifle intended for use in training Canadian Army and RCAF cadets during WWII. This Military Cooey Model 82 trainer from WW2 was used for drilling purposes, target shooting, Home Guard and Cadet training.There is a Stock Number and C broad arrow on the bottom of the pistol grip and a crest on the top of the receiver. The bolt also has the C broad arrow. Nice walnut stock with minor marks on the stock as can be expected on a training rifle. This rifle does not have a peep sight and was used as a training rifle for the Lee En-field No 1's. Bluing is very good bore is excellent. Comes with web sling $550.00.

categories:GunsSporting Goods

6085 impressions

277 views

Browning Maxus II Rifled Deer 12 Gauge 3in Mossy Oak Bottomlands Semi Automatic Shotgun,22in thick wall, fully rifled barrel for use with slugs. Cantilever, Weaver style scope mount for easy optics attachment. Composite stock with close radius pistol grip and over molded gripping surfaces. Shim-adjustable for length of pull, cast and drop. Mossy Oak Bottomland camouflage. Ideal for big game hunting. Brand new.Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Valid Pal a Must and will be verified for reference number. Please send message to: medal1958@gmail.com

categories:GunsSporting Goods

4128 impressions

162 views

Marstar pistol case 13.5"x8"x3.5" Easily fits 2 full size hand guns. Local pick up only. Text or call only.

categories:GunsSporting Goods

40573 impressions

1717 views

For sale are KCI glock magazines They have been pinned by rivet (not crimped) to reduce thier capacity from 33 rounds to a canadian legal 10. They work well in the PC9, K9, Henry Homesteader, Raven9, TNW areo and the JR carbine in addition to glock 17/19 pistols. Multiple units available One magazine is $60 Five magazines are $250 10 magazines are $450 Shipping available at actual cost or pick up in SE Edmonton. A PAL is required to buy these items.

categories:GunsSporting Goods

27326 impressions

658 views

Excellent condition, uses standard CO2 cartridges. Comes with 11 shells. Can use BB or pellets. Neighbours objected to my magpie control efforts. Sells new for $250, I’m asking 175.

categories:GunsSporting Goods

2272 impressions

180 views

CZ Branded Pistol Cleaning Kit. Compact (15 x 9 x 3.5 cm) semi-rigid case with MOLLE on the back Threaded cable Cable attachment - wiper Plastic brush Oiler with Interflon oil Brass brush Set of textile squares $15 per, multiple available.

categories:GunsSporting Goods

24136 impressions

676 views

16 oz. reloading room/range accessory, which keeps your coffee hot or " other beverage " cold while you are reloading or at the range ..... bought a few of these at a gun show in Denver in the year 2000 but this one was never used, so is in excellent condition. If you have your own pictures, you can unscrew the bottom, remove the photo sheet as a template and replace it with your own pictures. I'm not sure who made it, but the bottom is marked patent pending and matches some of my early Starbucks bottoms that were ( and still are ) all made in China----BOTTOM MARKED " do not microwave" and " hand wash only" also like the Starbucks tumblers and in the same script. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

21731 impressions

606 views

No pal req. 2x starter pistols. $600 shipped Firm.

categories:GunsSporting Goods

43358 impressions

2712 views

1) Win post 64 Pistol Grip Cap with Red "W" Insert - $100.00 2) Win post 64 Pistol Grip Cap "W" Insert Only - 0.735" x 1.16" - $75.00 3) Win post 64 Pistol Grip Cap with Scroll Insert - $100.00 4) Winchester Pistol Grip Cap Scroll Insert Only - $30.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

28530 impressions

615 views