For sale is a Bettinsoli X-9 Sporting over / under shotgun. It is a 12 gauge model, with 2-3/4" & 3" chamber, and 32" barrels. The barrels have ventilated top and mid ribs (w/ white front & silver mid bead). This model has an adjustable comb (for a personalized fit). It also has an upgraded Kick-Eez recoil pad professionally installed (original is included). This shotgun has a barrel selector, with manual safety. It comes with a full set of 5× extended chokes (F, IM, M, IC, C), and the choke removal key. The factory take-down hard case is included as well. It is in great condition with low round count! The opening lever is still well to the right of center! P.S. This shotgun is over CAD $3,000 new with taxes!

categories:GunsSporting Goods

13292 impressions

782 views

For sale is a Churchill 512 Silver double-barrel, side-by-side 'shorty'. It is a 12 gauge model, with 3" chamber, and 12.5" barrels (w/ fixed cylinder chokes). It has a full length turkish walnut stock. It is one of the shortest non-restricted shotguns on the market (with an OAL over 26"). This model has a barrel selector, and manual safety. This shotgun has less than a box of ammo through it, and is not even fully broken-in (the action is still very tight!). There are a few handling marks. It is a great shotgun for backcounty backpacking!

categories:GunsSporting Goods

15819 impressions

641 views

For sale is a brand new Browning Maxus II semi-auto (gas-operated) shotgun. It is the 'Wicked Wing' (burnt-bronze cerakote) edition, with Mossy Oak camo. It is a 12 gauge model, with 3" chamber, and 26" barrel (rare). It has a raised (& ventilated) top rib (w/ red fiber optic front & white mid bead). It has rubber over-molded stock/forend grips. It has the Browning 'Inflex' interchangeable recoil pad. This model also has the magazine cut-off switch. It comes with 3× Browning Invector Plus "Goose-Band" extended chokes (F, M, IC). The factory take-down hard case, and all other original accessories (owner's manual, warranty card, cable lock, choke removal key, stock spacers & shims etc.) are included as well! It is in excellent plus condition, and has never been fired! It is the perfect shotgun for waterfowl hunting due to the rust proof finish! P.S. this shotgun retails for $2,750 + Tax (i.e., over $3,100 new). Save yourself over $600 dollars on a brand new shotgun!

categories:GunsSporting Goods

16782 impressions

548 views

For sale is a brand new (in-box) Ruger-made Marlin 1895 GBL "Guide" model, chambered in .45-70 Govt. This model has a brown laminate (checkered) stock & forend, with satin (blued) metal finish. It has a 19.1" cold hammer-forged barrel, threaded for a muzzle device (also c/w a thread protector). It also has a 'big-loop' lever (for ease of use). It comes with semi-buckhorn (adjustable) sights. In addition, a Mid-West Industries (MI) picatinny lever-rail is installed from the factory (for mounting optics). The box, and all other accessories (owner's manual, cable lock, hammer extention, tags/stickers etc.) are included as well! It is in excellent plus condition and has never been used (except factory test rounds).

categories:GunsSporting Goods

9253 impressions

396 views

For sale is a rare Valtro PM-5 (Made in Italy) 12 gauge pump-action shotgun. This model has a mag-fed design, and comes with 1× 6-round detachable box magazine (steel). It has a 14" barrel (w/ full choke) & iron front sight. It comes with a pistol grip stock. This shotgun has a steel receiver (w/ metal trigger group) and dual action bars. There are a few marks from normal usage.

categories:GunsSporting Goods

6283 impressions

339 views

Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Ammo is available but sold separately. This one can soot 3 factory loaded modern types of ammo including original 8mm, 7.5mm Nagant and 32S&W Tested with smokeless powder. Comes with FRT paperwork. French Model 1892 Service Revolver in 8mm lebel caliber, 4.5" barrel, 6 shot. Very well built and robust . Fiocchi manufacturers modern 8mm ammo as well. The action functions excellent in single and double action. Timing and lockup are very good. Lanyard ring is undamaged. The gun is in excellent condition, with 99% of the arsenal blue intact. There is no surface pitting. The markings are sharp and complete. The action is tight and accurate, and the cylinder indexes and locks properly with no play. The bore of the 4 1/2 inch barrel is excellent and bright. The rifling is sharp and uninterrupted. The walnut grips are very good and undamaged, showing no wear. SN G10123, dated 1897. The Model 1892 revolver (also known as the "Lebel revolver" and the "St. Etienne 8mm") is a French service revolver produced by Manufacture d'armes de Saint-Étienne as a replacement for the MAS 1873 revolver. It was the standard issue sidearm for officers in the French military during the First World War. The Modèle 1892 revolver is a solid frame revolver with the cylinder on a separate frame swinging right for manual reloading. The Modèle 1892 was first fielded in 1893 and was prominent among French military officers during First World War, and later the French police until the mid-1960s.

categories:GunsSporting Goods

3762 impressions

194 views

Please text anytime 6476871484. Fully functional antique revolver in perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44 Double Action "First Model", .44 Russian This one is in very good condition. With original finish remains, the markings are well visible. The action is strong and accurate, and the cylinder indexes and locks properly. There is minimal side-to-side movement. The bore of the 6 inch barrel is very good, with strong rifling and little signs of wear and use. The original wooden grips are very good and undamaged. There is no wear visible. The front sight has been upgraded with a German silver blade for better accuracy. SN 12499, very good overall.​ History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped for the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

4297 impressions

230 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44 New Model No. 3 Top Break, .44 Special / Russian Revolver. This one is in very good condition with longer 1 9/16 cylinder and can shoot both .44 Special and 44 Russian ammo. The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 5 inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid. Extractor works as it should. SN 10682, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favor of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

5660 impressions

612 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot condition ,very smooth action. No PAL needed. Can shoot 32rf long and short. Comes with FRT RCMP paperwork. Smith and Wesson No. 2 "Old Model Army", .32 RF Revolver This one is in very good condition. With original blue. The action is strong and accurate, and the cylinder indexes and locks properly without play. The bore of the 5-inch barrel is very good, with sharp rifling and mirror bright. The rosewood grips are very good and undamaged. They look like they may have been re-varnished once. SN 59474, very good overall. History & Background Horace Smith and Daniel Baird Wesson acquired Rollin White’s patent (1855) for the bored-through cylinder to manufacture what they originally called the No. 1 revolver in .22 rim fire. It proved to be a rather ineffective little pocket revolver but was nonetheless very popular with civilians as a personal protective weapon. In 1861, just as the civil war gained momentum, S&W decided that they needed a larger caliber revolver in order to be able to convince the buying public (many of them enlisted in the war) that their gun was a viable protective option and as a back-up gun in battle. The scaled-up design was duly named the No. 2 and was nicknamed the “Army”, as it was widely used by military personnel as a personal side arm. Smith & Wesson retained and defended the Rollin White patent aggressively throughout the civil war period, and until its expiry in 1870, and therefore the No. 2 “Army” would be the only American made cartridge revolver used during this conflict (although several “unlicensed” makers added their wares into the fray, such as Uhlinger, Pond and Moore). The model is called “Old Model” due to its frame shape – the square butt and octagonal barrel of the model 1 ½ First Issue, as compared to the bird’s head grip and round barrel of the Second Issue. There is no “New Model” Army. The "No. 2 Old Model" was a popular personal side arm of many officers in the Union forces during the American Civil War, and is also known as the "Army" model. It was first introduced in 1861, and made until about 1874. The "No. 2" refers to the frame size, "No. 1" having been the first, .22 caliber pocket revolver and the "No. 3"'s being the large-frame revolvers. The 1 1/2 was introduced after the number 2, and since it fits in between the no. 1 and no. 2, it was named the no. 1 1/2. The no. 2 was owned by such famous Americans as General George Armstrong Custer and "Wild Bill" Hickok, the marshal of Deadwood...

categories:GunsSporting Goods

13200 impressions

448 views

Hello, I have a Ithaca Model 51 Featherlight Semi-Auto 12 Gauge Shotgun for sale. I am the owner. I am selling several firearms from my fathers estate.

categories:GunsSporting Goods

1142 impressions

118 views

WINCHESTER MODEL 37A,410 GA 26 IN CLEAN BORE BARREL CHAMBERED 3.0 IN. PREVIOUS OWNER REPLACED FRONT BEAD WITH WELDED ON HOME MADE BEAD AND ALSO INSTALLED SLING SWIVEL ON FOREND, THAT DOES NOT WORK AS WHEN YOU PULL ON SLING, THE GUN COMES APART , TO SOLVE THIS HE INSTALLED A PIN FROM RIGHT TO LEFT ON THE SIDE OF THE FOREND TO LOCK IT IN PLACE, THAT MEANT THAT YOU COULD NT TAKE IT APART ANYMORE, SO I REMOVED THE PIN, THE FRONT SWIVEL AND INSTALLED ONE THE BARREL AS IT SHOUL HAVE BEEN DONE BUT YOU HAVE 3 HOLES IN THE FOREND TO FIX. OTHER THAN THAT , ITS FINE. SHIPPING IS $50 ANYWHERE IN CANADA, CONTACT RENÉ AT 514 713 2310 OR ADCRENE65@GMAIL.COM

categories:GunsSporting Goods

1397 impressions

118 views

I have a Model 1908, 12 gauge single shot, Harrington and Richardson arms CO( Worcester.mass.USA made in USA) (12 gauge choke) for sale. This 12 gauge single shot has had the barrel shortened to about 20 inches. Barrel and receiver are in nice condition with little to no scratches shown in pictures. Wood has nice handmade woodburning engravings of two dragons on butstock, forend had wood it ing of dragon eye. Buttstock had been repaired showed in pictures. Gun is in overall good working condition. Open to trades. Located in evansburg but make frequent trips to spruce grove .

categories:GunsSporting Goods

48849 impressions

1360 views

Fixed full and mod chokes, closes tight,  no issues, works as it should. Shows normal usage with some minor dings.  Barrels are good.  Length of  pull is 13.5 "without pad, 14.5 with pad.   A great Christmas Present .... Please use cell phone text messaging." Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference

categories:GunsSporting Goods

5056 impressions

349 views

Lightly used Savage BVSS Varmint Hunter in 308 Win. More of a bench shooter than a long distance gopher gun but quite a nail driver. All Stainless Steel with the AccuTrigger & a heavy laminated stock. Some light scuffing to the laminated stock from the previous owner but its basically scuffed varnish. $1250 plus shipping but I would prefer a local (Edmonton Area) sale.

categories:GunsSporting Goods

7620 impressions

448 views

Non-Restricted rifle Remington model P17, .30-06 bolt action, w/ bbl length 24" [Blued barrel and receiver. Fixed front, no rear sight. Fitted with Universal 4X32 scope. Sporterized wooden Monte Carlo stock with aluminum butt plate. Fitted with sling mounts. Marked NOT ENGLISH MAKE, logo with crown and BM on left side of receiver. Other markings include .30/06 NITRO PROOF etc. on barrel, BM logo on bolt but no serial number seen. Parts gun as receiver has a crack by the nitro proof marks. Bluing worn in use and handling areas. Two drilled and tapped holes on right side of receiver with corresponding notch removed on stock, presumably from once attached rear peep sight. Handling and storage marks on wood and metal. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code

categories:GunsSporting Goods

38375 impressions

2686 views

Made in Finland M22000 Valmet Jyvaskyla Standard . 22LR Competition single shot bolt action. 27.5" heavy competition barrel. Adjustable butt plate and set trigger. Friction T channel sling slot. Profiled competition heavy stock for right handed use. Bushnell 3-9 x 20 scope with dovetail rails on receiver. Drilled and tapped for rear sight with front sight mount. VKT (Valmet), or the State Rifle Factory became operational September 9, 1928. Since 1930 Valmet's factory rifle club was active as well, having their hand in the design of the Finnish Lion, together with Aimo Lahti, the chief designer. 2. The Finnish Lion has the longest manufacturing time of all Finnish guns, from 1930 to 1979. Models are: M30 (prototype), M31 mod I, mod IIa, IIb, IVb, IVc, M35, M45, M52, M55, M59, M62, M65, M70, M200002 (Finnish Lion Standard) and wild boar version. Heavier models were the Finnish Lion Match and Champion. Two lighter version were also made, Junior and Pikku Leijona (Little Lion). 3. Serial numbers start from #1 (1932), and end into # 14,358 (1979). 4. The bolt and trigger are said to have been ahead of their time. The lock time is fast. Also the barrels were accurate. Champion models should have a set trigger, which makes lock time longer, but reduces pull weight. 5. Some of Vlamet's success in competition: WORLD RECORDS: -Lucerne 1939, 40 shots prone -400 points, Toivo Mänttäri -Buenos Aires 1949, 3x40 team contest 5770, finnish team, 40 shots standing, 380 points, Pauli Janhonen WORLD CHAMPINSHIPS -Buenos Aires 1949, 3x40 shots, 1165 points, P. Janhonen -Stockholm 1947, 40 shots standing, 377, H. Erben 6. The Helsinki Olympics in 1952 was the prime time of the Lion. A quarter of all shooters shot the Lion, prone gold was won by a Romanian - a Mr. Sirbu, score 400. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:GunsSporting Goods

32341 impressions

1249 views

Siderlock Safety Trigger Kit. Designed to fit Glock Gen 1-4 Models: G17, G17L, G18, G19, G29, G29SF, G20, G20SF, G21, G21SF, G22, G23, G24, G25, G26, G27, G28, G30, G30S, G30SF, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41, G42, G43X, G47, G48. Does Not Fit: Gen 5 Models. Siderlock Safety Trigger's Help Prevent Accidental Discharge!! The Glock pistol has a combination of three automatic safety features (trigger safety, firing pin safety and drop safety), which are sequentially disengaged when the trigger is pulled. The central pivot of the trigger is the first safety mechanism to disengage when the trigger is pulled and therefore the most important. The safety pin of the Siderlock trigger is a precise positioning system and when engaged blocks the movement of the central pivot avoiding an accidental discharge of the weapon. The Siderlock trigger offers the option of keeping the pistol in its original firing configuration simply by not engaging the lock. The Siderlock concept is simple: With a push on the safety pin a sliding pin acts to block or release the movement of the central pivot of the trigger, where by avoiding an accidental discharge when the slide is in the block position, and behaves exactly as the original Glock trigger when in the release position, all the while maintaining the original manufacture specifications. Once the Siderlock trigger is installed on the pistol, firing is accomplished by sliding the safety pin to the left prior to pulling the trigger. Preventing firing is obtained by simply sliding the safety pin to the right (Right hand Shooter assumed). For left-handed shooters, simply remove and invert the safety pin using the tools and instructions provided with the Siderlock trigger. No matter which position the slide is in it never extends beyond the trigger guard, avoiding any accidental contact with the holster ether inserted or withdrawn. Siderlock adheres to the same high manufacturing standards as Glock, using only high quality materials, a simple design and construction process, and therefore is guaranteed for life. Features: Replaces factory trigger. Adds an extra measure of safety. Avoids an accidental discharge. Maintains Glock original specifications, and fits all Glock Gen 1-4 models. Easy installation, includes detailed instructions and images. Ambidextrous and dismantled. High quality materials. Does NOT fit Gen 5 Models. See our complete line of Glock Products here Note: NDZ always recommends any part be installed by a qualified and trained gunsmith. NDZ promotes the use of safety practices and gear when working on any firearm. DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. Proposition 65: Click for Proposition 65 Warning Product Features Manufacturer: Siderlock Type: Trigger Safety Accessory Model: Safety Trigger Country/Region Of Manufacture: Made in USA Color: Black For Gun Make: Glock For Gun Generation: Gen 1-4 For Gun Model: G17, G17L, G18, G19, G29, G29SF, G20, G20SF, G21, G21SF, G22, G23, G24, G25, G26, G27, G28, G30, G30S, G30SF, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41, G42, G43X, G47, G48 Does Not Fit: Gen 5 Models

categories:GunsSporting Goods

15437 impressions

419 views

(THIS SHOTGUN IS NOT AVAILABLE ANYMORE - IT HAS BEEN SOLD) Ad Title: Lefever Nitro Special, 12GA, Double Barrel Shotgun Make : Lefever Arms Co., Ihtaca, N.Y. Model: Nitro Special Serial No: 39917 Type of action: Break Action Barrel length: 30 inches (Right barrel Medium choke – Left barrel full choke) Caliber: 12GA (Should be 2¾”) Note: N/A Condition: Good overall condition. Blue on barrel is about 30%. No finish left on the action but looks very nice. The bores have a low level of oxidation and a few small bumps on both barrels. The action is tight and works properly. While it may still be a shooter, I offer it as a collectible firearm. Permit: PAL required Price: $185.00 Cdn Ref: 24A015 Shipping: $30 in Canada (Stock separated from the action for shipping) Basic Insurance: $125 included with all purchases Full insurance: Add 1% of the value of your purchase to get full coverage Payment: By E Transfer

categories:GunsSporting Goods

596 impressions

96 views

Remington Versa Max Synthetic LEFT-HANDED 12-gauge semi-auto shotgun. Soft-shooting gas system, excellent reliability. Discontinued model — left-hand versions are increasingly hard to find. Condition: • Like new / essentially unfired • No wear, no issues • Properly stored Includes: • Original Remington hard case • All factory chokes • Manuals & accessories (as shown) Ideal for hunting, clays, or range use — especially for left-handed shooters who want a proven semi-auto without current production compromises. Price: $1,100 Open to reasonable discussion in person No trades Pickup: Kelowna Valid PAL required Face-to-face sale only, per Canadian law If the ad is up, it’s available.

categories:GunsSporting Goods

1392 impressions

101 views

For sale is a used Browning Citori CXS over / under shotgun. It is a 12 gauge model, with 3" chamber, and 30" barrels. It has ventilated top and mid ribs (w/ white front and brass mid beads). It has the Browning Inflex (interchangeable) recoil pad w/ a LOP spacer installed. This model has an adjustable trigger, with barrel selector, and manual safety. It comes with 6× Invector Plus extended chokes: Browning (F, M, IC) Carlson's (IM, SK, SK). The choke storage case, choke removal key, and the Allen key (to adjust the trigger) are included as well! This shotgun is in good condition. There is some blueing loss/wear at the bottom of the action and trigger guard, and a few nicks in the stock. The previous owner failed to disclose this at the time of sale, so I am selling it as purchased! I have the original box and paperwork as well!

categories:GunsSporting Goods

4739 impressions

258 views

Hey I have a nice shape beretta model a391 extrema 2 reciver.. finding a spare or replacement reciver is near impossible for this gun and i have a beautiful one for sale for a really fair price that would definitely help someone out.. these recivers are known to crack so dont miss out on your chance to get a spare or replacement

categories:GunsSporting Goods

551 impressions

63 views