Brand new Ultra light Weighs only 300 g Fully adjustable to fit different sizes of body shapes Material: Cordura fabric Can be loaded with both Front & Rear 10"*12" Body Armor Plates Note: Just the carrier without any plates. It can hold our company's NIJ III and NIJ IIIA plates but maybe can not hold other ones because the other ones could be too thick. Made in China

categories:Sporting GoodsGuns

3242 impressions

614 views

Selling/trading a Henry US Survival AR7. Overall it's in nice shape with the exception of the butt plate which has a large hole in it from being damaged during shipping. Stock and steel are otherwise in very nice shape with minimal notable imperfections. A new Armalite AR7 butt plate will be included but doesn't fit properly and will need to be heated/stretched to fit. Comes with two magazines and its original iron sights. Looking for $395 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

620 impressions

50 views

12 gauge non Damascus. Dates back to early 1900s. Needs butt plate. Was offered $1800 u.s but due to hassles going over the border buyer backed out. Taking realistic offers.

categories:Sporting GoodsGuns

2421 impressions

522 views

Selling/trading a Winchester Model 12 Deluxe Trap Grade 12 gauge. Overall it's in nice shape. 32" solid rib barrel, takedown model, with European straight grip stock, 2 3/4" chamber, fixed full choke. Steel has turned to a nice patina throughout with no major flaws other than some light freckled spots here or there. Wood stocks are in good solid shape with original checkering still present, normal bumps and marks here and there. Original black diamonds are still present at the wrist on each side. Butt plate is missing one screw (will replace if I can find one) and is not original to the gun, slightly ill fitted, but is an original Winchester butt plate. Bore is in nice shape. Overall a very solid M12 Trap. Looking for $1395 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

897 impressions

73 views

7x57 (7mm Mauser) built by H. Berg on a Mauser 98 Action from Flensburg (NE Germany).  Specs:  24" Barrel using Bohler Spezial Austrian Steel (not sure the twist rate). Walnut Stock, 3-position safety, double-set triggers (roughly 5.5 lbs & 2.5 lbs).  Flip-Up express rear sight.  This is a "Hunting Gun" and shows typical scuffs, scrapes and minor dents throughout.  The receiver has NOT been drilled & tapped.  The test target shown was only at 25 yards, just to prove that the gun shoots well.  On the underside of the barrel is bare metal (32 mm X 6mm) where I believe there was a mounted front swivel on a plate.  There is no swivel on the fore-stock but could easily be installed.  The barrel is clean & bright with good rifling.  This would be a great quad gun or open sight deer stalking rifle through the woods.  I'm selling because I have four other 7X57's and trying to reduce my collection. You must have a valid PAL to purchase.  For a quick response, best to text to 780-933-5475.

categories:Sporting GoodsGuns

5125 impressions

387 views

****Pls check other ads of mine for more accessories and guns**** (Order 3+ items for special deals!!) End Plates: [Pretty and functional] === $9 each (5 left) [Not pretty but functional] === $5 each (1 left) [Unused] 3 oz CNA Buffers === $19 each (8 left) [Unused] Buffer Springs === $10 each (4 left) Pickup around GTA Ship on buyer

categories:Sporting GoodsGuns

8467 impressions

889 views

BROWNING A BOLT CHAMBERED IN 7MM REM MAG, EXCELLENT CLEAN SHINY RIFLING, SERIAL NUMBER PUTS IT AS MANUFACTURED IN 1992 , VERY NICE BLUE, NO RUST OR PITTING, NO CRACKS OR GOUGES ON WOOD BUT IT HAS SOME LIGHT SURFACE DINGS AND SCRATCHES, FLOOR PLATE WITH DETACHABLE MAGAZINE. COMES WITH SLING AND BAUSCH LOMB 1.5X6X32 CLEAR SCOPE. SHIPPING IS $75 ANYWHERE IN CANADA . CONTACT RENÉ AT 514 713 2310 OR ADCRENE65@GMAIL.COM

categories:Sporting GoodsGuns

17195 impressions

789 views

.40 S&W Once fired nickel plated brass. Hand sorted. No damaged or bulged cases. $55.00 / 1000, $30.00 / 500. $15.00 / 250. These cases are not tumbled and have primers in. 2000 qty available. Sorry no tumbled and polished available currently but will on request. Willing to ship.

categories:Sporting GoodsGuns

12154 impressions

692 views

Gun Safe Slider with Fingerprint, Password, Key Access for Pistol Storage. This handgun safe offers reliable security for your firearms and personal belongings. It accommodates one handgun and a magazine, providing quick access through fingerprint recognition, a numeric code, or a key. The built-in smart display monitors temperature and humidity levels, while the LED lighting and silent mode enable discreet and efficient operation. Features & Details Three Unlocking Options: This pistol safe offers three access methods—register up to 30 fingerprints, set a 4 or 6-digit code to prevent unauthorized entry, and utilize the two backup keys or USB emergency port for convenient access in case of battery failure. Temperature and Humidity Monitoring: This gun safe accommodates a full-sized handgun and a magazine, equipped with an LCD screen for easy tracking of temperature and humidity levels. Check the battery status at a glance and insert a desiccant when needed to manage high humidity. LED Lighting & Quiet Operation: This firearm storage box is equipped with LED lights that illuminate for 10 seconds upon opening, providing clear visibility in low-light conditions. The quiet mode allows for discreet access, adding an extra layer of security for your home. Sturdy and Safe: This firearm storage box is constructed from robust metal and features a reinforced anti-tamper design to prevent unauthorized access and ensure the safety of firearms from children. The interior is lined with dense foam to shield your weapon from scratches and vibration-related damage. Effortless Setup: This handgun safe features a pre-drilled mounting plate and offers three versatile installation options—left, right, or top. Its sleek and compact design allows it to be easily placed on desks, shelves, or nightstands, ensuring quick and convenient access in your home, workplace, or commercial space. Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

1315 impressions

78 views

For sale is a Winchester 1873 Sporter Grade 3 in 45 Colt. 24" barrel. It has Pedersoli sem buckhorn rear sights and a Pedersoli front bead. She is in excellent condition other than some very fine scratches in the left side receiver plate that you can only see if you turn it in to the light just so. Really nice gun, but I had it set up for a 100 yard silhouette gun, but came across a rolling block in 45 Colt I use for it now. If you are unsure of me, I am COREY on Canadian Gun Nutz if you want to check on me.

categories:Sporting GoodsGuns

2662 impressions

177 views

Selling/trading a Browning BBR in 30-06. Overall it's in good shape. 24" barrel, Japanese made. Bluing is in very nice shape throughout with only light imperfections here and there to note. Wood stock has marks, dings and scuffs throughout but is in good solid shape. Bore is very nice. Comes topped with a Browning one piece base, 1" rings, Simmons 3-9x40mm scope and will come with one detachable magazine and sling pictured.  I've also got another Browning BBR barrelled acton in 7mm Rem Mag. Complete with bolt, trigger guard and floor plate. Does not come with a magazine. Bluing is in nice shape throughout, bore is very nice. Comes topped with a Browning one piece base.  Looking for $1095 shipped for the complete rifle with scope, $695 shipped for the barrelled action, or $1595 shipped for the complete package. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

2666 impressions

204 views

Suzuki samurai/toyota rock crawler 22re motor and 5 speed toyota trans Twin stick t-case 4:74 ratio Toyota truck axles 5:29 ratio, rear spool locker and a limited slip (lunch box) locker in the front Full coil suspension (fox shock/spring packs) Custom Long arm 4 link Diffs are armored Full Skid plates Full PSC hydraulic steering (steer the thing with one finger) Aluminum radiator Electric fans 41.5" pitbull tires on beadlocks Racing seats with 5 point harnesses Under glow Light bar Full roll cage New diff bearings New wheel bearings and seals This rig is unstoppable, quads couldn't dream of following you. Fun rig ready to crawl. Cash $15500 or $20,000 trade value Trades for muscle cars (Mopar or Chev), jet boat, heavy equipment, trucks etc. If you need your wife's, girlfriend, shrink or bosses permission to buy this please get it before contacting me! I'm happy to talk about the rig and answer any questions, but I have no time for time wasters

categories:Sporting GoodsGuns

8040 impressions

605 views

Bought a year or two back had on my rifle for one firing session and then took off as I just liked the wooden stock better absolutely nothing wrong with it like new condition for Marlon leaver action rifles meant for the curved handle stock series, but will fit a straight handle stock as that is the rifle I have and it does fit. stock is listed at 299 American and $60 American for the bullet holder plate it cost me over $500 Canadian with shipping. I’m asking 400. Will mail

categories:Sporting GoodsGuns

4896 impressions

584 views

Canadian Long Branch Lee Enfield. Not sure if all matching or not. But it is all original Long Branch by the looks of it except the butt plate. Appears to maybe have been cleaned up at a english arsenal as there are two serial numbers one appears as a regular long branch serial number while the other resembles the British standard of serial markings..

categories:Sporting GoodsGuns

4706 impressions

648 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

20639 impressions

1199 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. Compact pocket revolver high quality and can fit in the palm of your hand.. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Forehand & Wadsworth " number 32 Double Action", .32 RF Pocket Revolver This one is in excellent condition. The nickel plating is intact. Factory Engraved. The action is crisp and strong, and the cylinder indexes and locks properly and tightly. The bore of the 2 1/2 inch barrel is very good and bright with sharp rifling. The grips are very fine and undamaged. SN 13745, excellent overall. ​ History & Background Sullivan Forehand was an employee of Ethan Allen, the famous New England gunmaker. In 1860 he worked in an administrative capacity when he met his future wife - Allen's daughter - at work, and after marrying into the family became a partner in the business. Henry Wadsworth, an officer in the union army, met another of Allen's daughters while still in service during the war, and married into the family as well. Upon his discharge from the army, Wadsworth joined the company which was renamed "Ethan Allen & Co." After Allen's death in 1871, the two sons-in-law took over the firm and renamed it "Forehand & Wadsworth. They would become well known especially for their bulldogs, but also their many fine pocket and large-frame revolvers, single-shot deringers and pistols. Forehand & Wadsworth remained in business until 1890 when Henry Wadsworth retired and Sullivan renamed the company "Forehand Arms". After Sullivan's death in 1898 the company foundered and was taken over by Hopkins & Allen in 1902.

categories:Sporting GoodsGuns

10163 impressions

643 views

Brand new with papers and carry bag, I have one large and one XL but can order different vests/ colours and sizes for you (even uniforms if you want) SHIPPING is okay.  Brand new with papers and carry bag Level 3A in front/back/neck/groin/sides Accepts standard SAPI hard plates Adjustable protection level and size Quick release and modern slide clips. Not visible in infrared VERY adjustable and will fit most people. Excellent protection  These are EXCELLENT vests and have all the most modern features that you’d want. The area of protection on these is spectacular and outclass the trendy minimal plate carriers which have proven to be useless in modern conflicts with shrapnel being the #1 concern.  I’m potentially open to trades or offers but the cost of a set of Kevlar from a store here is $900 ALONE! So getting a $1200 vest with Kevlar and peripherals (equivalents would be like $4000)  If your province requires a PAL to own I’ll need to see it. 

categories:Sporting GoodsGuns

1939 impressions

308 views

New H-S Precision Detachable Magazine trigger guard assembly (DBM) - Stainless finished in black. Upgrade your Remington 700 Short action BDL (Hinged floor plate system) with this aftermarket tough bottom metal. works with aftermarket clones (remington copy - bergera, christension arms etc.) but the stock inlet has to be patterned after the original Rem. 700 BDL hinged system to drop in. Shipping optional but at extra cost. Price is firm.

categories:Sporting GoodsGuns

6360 impressions

380 views

Using the same principle as electroplating, this system uses a low voltage and chemicals to remove the lead or copper from your barrel and plate it on the sacrificial anode (stainless steel rod) that you insert in the barrel. It did work in my 243 win 1885 but I just don't shoot enough to make it worthwhile. I think if you had some heavily fouled barrels, maybe a cache of military surplus for example this would be alot less work that scrubbing forever. Comes with the controller, the chemicals, the stainless steel rod and the electrochemical isolation doo-dads. Not sure about shipping as the rods are 30" long and there are two chemicals. One for Copper and one for Lead. Cheers, Cody

categories:Sporting GoodsGuns

4552 impressions

227 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:Sporting GoodsGuns

21093 impressions

609 views

Winchester SX3 Hybrid Shotgun, 12GA. 3" Chamber 28" Barrel​,Gray Cerakote finish, black composite stock, chrome plated barrel, aluminum alloy receiver, gas operated Active Valve system, inflex recoil pad, reversible safety. Winchester designed the model SX3 Hybrid Waterfowl Semi-Auto Shotgun specifically for hard-core duck and goose hunting.Come with Mod choke in.Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Valid Pal a Must and will be verified for reference number. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

11793 impressions

515 views