Sporting Goods/Guns in Canada / Enfield

FREE online Gun Classifieds for Canada. Easy to use buy and sell website for firearm owners to post used guns in Canada.

Popular search terms:

Photo of Lee Enfield No: 1 Mark III 1938 GR1 Singapore SMTLE
$1600
Lee Enfield No: 1 Mark III 1938 GR1 Singapore SMTLE
Lee Enfield No: 1 Mark III 1938 GR1 Singapore SMTLE . 303 BRITISH 10 round Mag, full wood, swivels, bayonet lug with pig sticker bayonet included, rear brass butt plate with tool kit compartment, 2000m rear adjustable iron sight. Frame and butt stock medallion match. Mag number unreadable. Length: SMLE No. 1 Mk III: 44.57 in (1,132 mm) Barrel length: SMLE No. 1 Mk III: 25.2 in (640 mm) In late 1915 the Mk III* was introduced incorporating several changes, the most prominent of which were the deletion of the magazine cut-off mechanism, which when engaged permits the feeding and extraction of single cartridges only while keeping the cartridges in the magazine in reserve, and the long-range volley sights. The windage adjustment of the rear sight was also dispensed with, and the cocking piece was changed from a round knob to a serrated slab. Rifles with some or all of these features present are found, as the changes were implemented at different times in different factories and as stocks of parts were depleted. The magazine cut-off was reinstated after the First World War ended, and not entirely dispensed with in manufacturing until 1933. The SMLE Mk III* (renamed Rifle No.1 Mk III* in 1926) saw extensive service throughout the Second World War, especially in the North African, Italian, Pacific and Burmese theatres in the hands of British and Commonwealth forces. Australia and India retained and manufactured the SMLE Mk III* as their standard rifle during the conflict, and the rifle remained in Australian military service through the Korean War, until it was replaced by the L1A1 SLR in the late 1950s.The Lithgow Small Arms Factory finally ceased production of the SMLE Mk III* in 1953.
categories:GunsSporting Goods
39456 impressions
1530 views
Saskatoon, SK1 day ago
Photo of BSA Model P17 30-06 23" barrel internal 4+1 Hinge Plate Mag
$450
BSA Model P17 30-06 23" barrel internal 4+1 Hinge Plate Mag
BSA Model P17 30-06 23" barrel internal 5+1 Hinge Plate Mag. Monte Carlo right handed stock, Adjustable rear sight with protected front hooded blade sight. Front and rear swivel mounts. Receiver is drilled and tapped for scope base mounts Made in England. Blueing is solid and the stock is in very good condition. Bore is shinny with good rifling. Canadian Non-restricted The M1917 Enfield, the "American Enfield", formally named "United States Rifle, cal .30, Model of 1917" is an American modification and production of the .303-inch (7.7 mm) Pattern 1914 Enfield (P14) rifle (listed in British Service as Rifle No. 3), which was developed and manufactured during the period 1917–1918. Numerically, it was the main rifle used by the American Expeditionary Forces in Europe during World War I.Thisbmodel was known as the P17 and chambered in 30-06 Springfield . The Danish Sirius Dog Sled Patrol in Greenland still use the M1917, which performs reliably in Arctic conditions, as their service weapon. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.
categories:GunsSporting Goods
42960 impressions
1985 views
Saskatoon, SK1 day ago
Photo of Swedish Mauser 30.06 1896 Mauser Action  23" barrel 5+1 hinge plate
$425
Swedish Mauser 30.06 1896 Mauser Action 23" barrel 5+1 hinge plate
Swedish Mauser action with Husqvarna barrel in 30.06, Sporter stock in good condition with butt pad cushion, swivel mounts, semi pistol grip with base cap. Knurling is in good condition. Adjustable rear sight for elevation. Overall good condition. Receiver is tapped for scope mount bases. All Swedish Mausers other than trials rifles were chambered for the 6.5×55mm Swedish cartridge, and all Swedish-made actions were proof-tested with a single 6.5×55mm proof round developing approximately 455 MPa (65,992 psi) piezo pressure (55,000 CUP).[4][5] Swedish Mausers were manufactured by Waffenfabrik Mauser AG in Oberndorf a/N in Germany and in Sweden by Carl Gustafs Stads Gevärsfaktori and Husqvarna Vapenfabriks Aktiebolag. All Swedish Mausers, whether built in Germany or Sweden, were fabricated using a Swedish-supplied high grade tool steel alloyed with nickel, copper, and vanadium, a product then noted for its strength and corrosion resistance. These rifles, like other pre-M 98 system Mauser rifles, lack the third safety locking lug at the rear of the bolt and feature "cock-on-closing" (similar to the contemporary Lee–Enfield rifle). CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.
categories:GunsSporting Goods
44236 impressions
2502 views
Saskatoon, SK1 day ago
Photo of British Pattern 1853 socket bayonet with leather scabbard
$125.00
British Pattern 1853 socket bayonet with leather scabbard
British Pattern 1853 socket bayonet with leather scabbard This is a British M1853 Socket Bayonet for use with the Enfield, Snider, Martini rifles. This 1853 pattern was the standard bayonet carried by nearly every British infantryman of the mid-19th century and widely used during the Crimean War, Indian Mutiny, and in numerous colonial campaigns. Production of the1853 pattern socket bayonet continued throughout the life of the Enfield Muzzleloader and the Snider rifle and was finally terminated in 1875. The blade has a slight downward curve to allow easier reloading while fixed to the muzzle-loading Enfield rifle. Measuring 44 cm (17 inches), it features a triangular cross-section with fullers on all three sides, tapering to a narrow, down-turned point. The blade is in good solid condition but is badly tarnished. The scabbard is in fair condition. The bottom brass below the frog hook is pulled free from the leather scabbard. The brass tip on the scabbard wiggles a bit but is still solidly attached. The stitching on the scabbard in the last 3 ½” above the end cap is partially missing but the scabbard is solid and not separating. The scabbard is stamped W.D. (War Department) below the frog stud with the Broad Arrow symbol above the initials. This stamping is difficult to see. The top of the blade at the base is stamped with an E over a crown over the number 25 Overall Length – with blade in scabbard - 21 3/8” Length of Bayonet – 20 3/4” Length of Grip including the Guard – 3 5/8” Blade Length – 17 1/8” $125.00 Thanks, Phil
categories:GunsSporting Goods
643 impressions
33 views
St. Albert, AB2 days ago
Photo of WW2 1940 Original Canadian WWII P37 canvas holster
$80.00
WW2 1940 Original Canadian WWII P37 canvas holster
Here is a Canadian/British origin and the C broad arrow marking), and cross-referencing the images (including the faint stamping that reads “Z.L.&T. LTD 1940” along with the C broad arrow symbol), this is an original Canadian WWII Pattern 1937 (P37) web pistol holster. Features •  Khaki/tan heavy cotton canvas construction, typical of British/Commonwealth web gear from the era to save on leather due to wartime shortages. •  Flap closure with brass snap (often called a “lift-the-dot” fastener in some variants). •  Brass or metal belt hanger and loops on the back for attachment to P37 web belts or pistol belts. •  Angled design for right-side hip carry, with a reinforced muzzle end. •  Markings: “Z.L.&T. LTD 1940” refers to the manufacturer Zephyr Looms & Textiles Ltd. (Toronto, Canada), a known WWII contractor for Canadian military gear. The “C broad arrow” (often stylized as C↑ or C with an arrow inside) is the Canadian government property/acceptance mark, indicating it was issued for Canadian forces (part of the British Commonwealth system, where the broad arrow denotes ordnance property, and the “C” specifies Canada). This holster was designed primarily for revolvers like the Webley Mk IV .455 or Enfield No. 2 .38, which were standard for Canadian troops early in WWII. However, similar P37 holsters were also used or adapted for the Canadian-made Inglis Browning Hi-Power 9mm pistol (produced from 1944 onward). Original Canadian WWII P37 canvas holsters in good used condition (like this one, with intact hardware and no major tears) typically sell for $150–$350 on sites like eBay, GunsInternational, or militaria forums/auctions. Factors influencing price include: Rarity of the early 1940 date (pre-U.S. entry into the war, during the British Commonwealth’s initial buildup). Clear markings (the C broad arrow and manufacturer stamp add provenance). Condition: This appears solid but field-used, so more toward the $200–$300 range. Recent comparable sales include similar Z.L.&T. Ltd.-made holsters from 1943–1945 fetching $200–$300. Can ship anywhere in Canada Please see my other ads for collectable military accessories.
categories:GunsSporting Goods
9198 impressions
165 views
Chestermere, AB4 days ago
Showing 21 of 127 records
Location
Search within
of
auction, garage sale, or moving sale

Having a garage, estate, or yard sale?

Create an ad event to promote an auction, garage sale, or moving sale.

Item Type
Firearms107Parts17Optics1
Gun Type
Rifle49Other4Handgun2Shotgun1
Action
Bolt104Lever3Single-shot3Revolver2Semi-automatic2
Caliber