Extremely rare Smith & Wesson double action favourite model.  approximately 1000 of these produced this one was sent to Berlin in 1887. This revolver still retains over 90% of the original nickel finish comes with a very nice set of pearl grips, the action functions perfect both in single and double action with excellent lock up and timing. Don’t miss an opportunity to own this extremely rare Smith & Wesson Antique. It comes with the RCMP, FRT document and the Smith & Wesson history letter. 

categories:GunsSporting Goods

7769 impressions

434 views

Smith & Wesson new model double action no 3 .This revolver still retains about 75% of the original nickel finish comes with a very nice set of pearl grips showing a little bit of were but no chips or cracks. The action functions very well in single or double action with good timing and lock up  still  lots of strong visible rifle but minor typical black powder pitting, it has a 6 inch barrel chambered in 44 Russian caliber  as well as a long cylinder , 1-9/16” This is an  revolver and you do not require PAL to purchase it. RCMP, FRT documents included.

categories:GunsSporting Goods

8609 impressions

484 views

Very rare Remington model 1875 SAA in 44 Remington caliber. This revolver still retains about 75% of the original nickel two piece wood grips show typical ware but no chips or cracks. The action is very crisp and functions correctly with excellent timing and lock up., the bore shows typical black powder pitting, but lots of strong visible rifling This is an antique and you do not require a PAL to purchase this firearm. RCMP, FRT document included.

categories:GunsSporting Goods

53234 impressions

3610 views

French Model 1874 T Back Sword Bayonet for use on the 11mm M1874 Gras rifle Manufactured at the French State Arms Plant of Tulle in August 1878 The Gras was the last of the French sword type bayonets and was manufactured from 1874 until about 1885. The Bayonet and Scabbard have matching Serial numbers 96363 The left side of the guard is engraved with what looks like half a written L and the numbers 96363.  The scabbard has the same mark and numbers on the left side. Above the number on the guard are 2 diamonds each with the letter B in them. The front of the guard just above the top of the blade has the letters L and P The pommel has the number 2 stamped inside at the base along with other stamps I have not identified. The top of the tang has what looks like a C6 stamped in it. The back of the blade is engraved with M d’Armes de Tulle Aout 1878   The Spring Lock works as designed.   Overall Length – with blade in scabbard  - 25 7/8” Length of Bayonet – 25 3/8” The blade has never been sharpened. Length of Grip including the Guard – 4 3/4” Blade Length – 20 3/8”   $250.00   Thanks, Phil

categories:GunsSporting Goods

20 impressions

7 views

*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. Can hold for a non-refundable deposit. Can also do a payment plan. Popular and hard to find Marlin Dark Series. Brand new in box. I only took it out of the box to inspect. It has only been function fired by Marlin before leaving the factory as with all Marlin rifles. Comes with everything it does from factory. $3250 for the 30-30 $3250 for the 45-70 $3500 for the 44 mag (Extremely hard to find) - 16” threaded barrel + thread protector - Durable graphite black cerakote - Polished radial muzzle brake - MLOK butt stock with cheek riser and flush cups - Hammer spur - MLOK & QD handguard - Extended length pic rail - Fiberoptic sights - Cable lock - Mid-sized finger lever for added comfort Will ship at buyer's expense but priority will be given to local sale in Calgary. Deal with confidence. I have 250 positive reviews on GP. No trades. If you contacted me via email, check your junk/spam folder for my reply email. Some people have notified me that it was going to that folder.

categories:GunsSporting Goods

90403 impressions

2923 views

Scope mounting, Rings lapping (1"+30+34mm) & aligning. Tread locked torqued to specs, Reticle leveled & laser bore sighted. ballistic data system for custom turrets. Top quality scope rings available all sizes, Lots of references available. Please text for inquiries.

categories:GunsSporting Goods

70490 impressions

4134 views

12 gauge over under Baikal shotgun in excellent condition. Russian solid built field gun 28 inch barrels, Comes with gun case almost 3 boxes of shells and gun lock. I also have 7 boxes of 00 buck for $6.00 a box available.

categories:GunsSporting Goods

5035 impressions

560 views

Bliss & Goodyear Protector single-action revolver chambered in .32 Rimfire. This is a classic American pocket revolver with solid historical significance and strong collector appeal. ✔Shoots perfectly ✔ Confirmed antique status – No PAL required in Canada ✔ Tight lock-up with excellent timing ✔ Smooth half-cock and full-cock operation; trigger is clean and usable ✔ Original bluing remains intact ✔ Bore shows good rifling ✔ Mechanically tested and functioning ✔ Original markings present; period-correct configuration

categories:GunsSporting Goods

764 impressions

55 views

This is a nice vintage Charles Lancaster 12ga side by side shotgun. By the serial number it is dated 1893. Block Lock Beesley Patent Spring Opening Action Barrel length 30" If you have any questions or would like more pictures feel free to call, text or email! 
+tax(12% in BC, 5% outside BC)+shipping 
Local pickup is available.
 250-753-3355 (Call or Text) 
Must have your PAL to purchase.

categories:GunsSporting Goods

15919 impressions

674 views

This is a great reproduction flint lock musket. It is developed from the muskets used at the tail end of the American Revolution right through to the war of 1812 and the Mexican-American war This is not the standard 39 inch barrel version but the nonstandard 46 inch configuration. It comes in .75 caliber. If you have any questions or would like more pictures feel free to call, text or email! 
+tax(12% in BC, 5% outside BC)+shipping 
Local pickup is available.
 250-753-3355 (Call or Text) 
Does not require PAL for purchase

categories:GunsSporting Goods

13655 impressions

994 views

Please text anytime 6476871484. Fully functional antique pistol no PAL required. Frank Wesson Single-Shot Pistol, .32 RF Short/Long RARE Frank Wesson, elder brother to Daniel Baird Wesson of S&W fame was an accomplished gunmaker when Daniel was still a boy. The two younger Wessons would apprentice with their oldest brother Edwin, and learn much of their expertise from this talented and versatile master. Frank would move to California in the 1850's, probably lured by the opportunities presented by the gold rush, making and repairing guns for the local needs. By 1859 he had moved back to Worceater where he set up shop in his own name. Frank is best known for his fine rifles, "bicycle rifles", deringers and single-shot pistols. Frank Wesson never ventured into the revolver market until he had partnered with his nephew Gilbert Harrington to form Wesson & Harrington. The revolver making business continued to evolve as Wesson & Harrington first, and then Harrington & Richardson.​ This is Frank Wesson's "medium frame" single-shot pistol, chambered in .32 rim fire. It is in excellent condition, with original blue. The little lever on the bottom of the frame releases the barrel lock when the hammer is in the safety position, and the barrel snaps open as it should. It will not open if the hammer is down, or fully cocked. The bore of the3 5/8 inch barrel is excellent and bright, with sharp rifling. The rosewood grips are very fine. This is an early model of the first variant, of which only about 1000 were ever made. SN 54, excellent overall.

categories:GunsSporting Goods

58827 impressions

3106 views

Please text anytime 6476871484. Fully functional antique revolver in mechanically perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44New Model No. 3 Top Break, .44 Russian Revolver This one is in very good condition. The the serial numbers match . The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 6-inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 5819, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

10780 impressions

429 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot like new condition. No PAL required. Comes with RCMP FRT paperwork. This is conversion to 45ACP /45 Auto also compatible with .455 Webley As well as original 11mm ammo. This one is in excellent original condition. it is "in the white", meaning it has never been blued or plated. It is not pitted, and all the markings are sharp and complete. The serial numbers are repeated on all components: the barrel, cylinder, frame, grips, internal mechanism parts and even the screw heads and escutcheons. Everything matches. The bore of the 4 1/2 inch barrel is as perfect and it is mirror bright and the rifling is sharp. The action is excellent and accurate, and the cylinder indexes and locks properly. The walnut grips are excellent and show no damage this one looks like new. SN G47715, manufactured in 1886, rated excellent overall. MAS Mle 1873 French Service Revolver, 11mm French Ordnance The Mle 1873 was France's first double action cartridge revolver. After the disastrous loss to Prussia in the war of 1870, the French military closely examined its armaments and small arms, and they came to the conclusion that a new, more rugged and powerful side arm for their infantry was required. The result was the Mle 1873, designed by the famous partners of Chamelot & Delvigne, whose genius ideas would dominate much of the European military (and commercial) small arms market for decades to come. Many European countries adopted their designs, including Switzerland, Italy, Sweden, Russia and Belgium. Only the Brits and Germans would continue to develop their own side arms.

categories:GunsSporting Goods

17481 impressions

1291 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Colt M1889 "Navy", .41 Long Colt Revolver This one is in excellent condition. It bears about o 99% of its original nickel plating. The nitre blue on the trigger, hammer and screw heads is well visible. The action is smooth and accurate, and the cylinder indexes and locks properly. The bore of the 4.5 inch barrel is fine and bright, with sharp rifling. The markings are sharp and defined throughout. The assembly numbers match on the cylinder, crane, barrel and frame. The grips are excellent and undamaged, showing no wear.SN 20959, rated excellent overall.​​ History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand. This would prove to be a weakness in the design, and by 1892 locking lugs on the outside of the cylinder were introduced. The 1889 model would remain in production for 18 years, with significant improvements in 1892, 94, 95, 96, 1901 and 1903. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:GunsSporting Goods

15926 impressions

874 views

Please text anytime 6476871484. Fully functional revolver in perfect ready to shoot condition. No PAL required. Reloadable ammo is available and sold separately. Hopkins & Allen "XL No. 4", .38 RF Pocket Revolver The markings are sharp and the numbers match on the frame, barrel and cylinder. The action is strong and tight, and the cylinder indexes and locks properly. The bore of the 2 1/2 inch barrel is very good, with strong rifling. The rosewood grips are excellent and undamaged, with varnish intact. SN 289, very good overall. History & Background One of the most prolific makers in America was the firm of Hopkins & Allen. Founded in 1868 by the principals Charles Converse, Charles and Samuel Hopkins, and Charles Allen, the firm assumed the assets of the Bacon Manufacturing Company. H&A used Bacon's machinery and inventory of parts, and continued at first to make Bacon's various models before switching to cartridge revolvers and later rifles and shot guns. H&A was in business until 1915, and claimed to be the "largest manufacturers of high-grade, popular priced firearms in the world". Hopkins & Allen were well known for their pocket revolvers and Merwin & Hulbert branded large-frame revolvers. H&A are generally of a better quality and workmanship than other suicide specials.

categories:GunsSporting Goods

6657 impressions

445 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. Compact pocket revolver high quality and can fit in the palm of your hand.. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Iver Johnson "American Bull Dog", .38 RF short and long Revolver Iver Johnson was one of the most prolific makers of pocket revolvers in America, from 1871 to nearly the present. One of the earliest makers of bulldog-type, double action revolvers, the Iver Johnson American Bull Dog is well known and in demand. These were made by Johnson's and the relief grip showing the American eagle on a shield is typical of Johnson's ware. ​ This one is in very fine to excellent condition, with 99% original nickel. The action is accurate and strong, and the cylinder indexes and locks properly with no play. The bore of the 2 1/2-inch barrel is good with strong rifling throughout. The black hard-rubber grips are excellent and undamaged. SN 2407, excellent overall. History & Background Iver Johnson (1841-1895) was a Norwegian gunsmith who came from Bergen to America in 1863. He found work immediately at Ethan Allen's factory in Worcester, Mass. where he met Martin Bye. Johnson worked at Allen's through the civil war years, as demand for firearms was high, and work was plentiful. By 1871 Johnson and Bye had decided to venture out on their own and founded Johnson Bye & Co. in Worcester, moving to Fitchburg by 1891. In 1883 Martin Bye left the company, selling his interest to Iver. The company name was changed to its most famous form, "Iver Johnson's Arms & Cycle Works, Fitchburg, Mass.", a name it would retain until the outbreak of the First World War. Iver Johnson did not only produce a large variety of firearms, they were also famous for their excellent quality bicycles and motorcycles. The company would remain in business until 1993. The name was "revived" in 2006 and the brand is still used today.

categories:GunsSporting Goods

9902 impressions

469 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. Compact pocket revolver high quality and can fit in the palm of your hand.. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Forehand & Wadsworth " number 32 Double Action", .32 RF Pocket Revolver This one is in excellent condition. The nickel plating is intact. Factory Engraved. The action is crisp and strong, and the cylinder indexes and locks properly and tightly. The bore of the 2 1/2 inch barrel is very good and bright with sharp rifling. The grips are very fine and undamaged. SN 13745, excellent overall. ​ History & Background Sullivan Forehand was an employee of Ethan Allen, the famous New England gunmaker. In 1860 he worked in an administrative capacity when he met his future wife - Allen's daughter - at work, and after marrying into the family became a partner in the business. Henry Wadsworth, an officer in the union army, met another of Allen's daughters while still in service during the war, and married into the family as well. Upon his discharge from the army, Wadsworth joined the company which was renamed "Ethan Allen & Co." After Allen's death in 1871, the two sons-in-law took over the firm and renamed it "Forehand & Wadsworth. They would become well known especially for their bulldogs, but also their many fine pocket and large-frame revolvers, single-shot deringers and pistols. Forehand & Wadsworth remained in business until 1890 when Henry Wadsworth retired and Sullivan renamed the company "Forehand Arms". After Sullivan's death in 1898 the company foundered and was taken over by Hopkins & Allen in 1902.

categories:GunsSporting Goods

3956 impressions

310 views

Please text anytime 6476871484. Fully functional double action revolver in perfect like new condition. No PAL required. Ammo is available but sold separately. Comes with FRT paperwork. Swiss M1882 Service Revolver, 7.5mm/ 32 S&W Swiss Ordnance The Swiss Service Revolver of 1882 was a modification of the Nagant revolver in use since 1878. It was modified by Swiss Colonel Rudolf Schmidt. It employs the Georges Abati cylinder advance system, by which the cylinder can be advanced without raising the hammer when the loading gate is open. This allows the shooter to load and unload the cylinder quickly, without having to touch the hammer. The gun is of typical Swiss quality, with clock-like precision.​ This one is in very fine condition, as restored. The blue is intact. The markings and numbers are sharp. The serial numbers match. There are also several sub-assembly numbers visible. The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 4 1/2 inch barrel is good, with sharp rifling and no signs of use. The gun is chambered for the Swiss 7.5mm cartridge, but will accept a .32 S&W long/short as well. The brown plastic grips are excellent and undamaged. SN 2357, very fine as restored.

categories:GunsSporting Goods

9684 impressions

636 views

Very nice Spanish 16ga sxs. Shiny bore and locks up tight. No issues, shoots well. Some blueing loss but no pitting.

categories:GunsSporting Goods

1212 impressions

65 views

Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g

categories:GunsSporting Goods

78007 impressions

2343 views

Want a new optic, and want to buy Canadian? There's a new option for Canadian glass, sort of: Apex Optics is based in Calgary, but its scopes are actually manufactured in Japan. Apex Optics was founded in early 2020 by a group of western shooters from a range of competitive disciplines. Their goal was to create a new optics brand for competition and long-range shooting reflecting their backgrounds (IPSC, Steel Challenge, 3-Gun, Precision Rimfire, Extreme Long Range, etc.). Several of these shooters are well-known in the west's shooting scene, with long history of competition. Apex's first release will be the Rival 4-32x56 mm, which it's been developing for about 18 months. Apex partnered with Japan Optics to actually manufacture the scope, although it's designed here in Canuckistan. The scopes also undergo quality control testing in Japan, and a secondary round of quality control in Calgary. This scope has some unique features due to its design process, including Apex's proprietary CLR competition reticle. This first focal plane reticle is designed for long-range matches where shooters need their scope to handle quick transitions, with top half of the reticle unobstructed. It comes with ranging marks, for scenarios where you can't use electronic rangefinders, and has six-level illuminated main stadia. You can see a full explanation of the CLR reticle design at Apex's website. The scope also comes with elevation turret that features 15 MILs per revolution; windage and elevation adjustments are 0.1 MIL per click. The turrets are not locking, but come with mechanical zero stop and two-turn indicators (future scopes may come with locking turrets). There's a stainless steel pop-up turn indicator. Apex says it has the industry's first see-through integrated and removable throw lever. The new Rival scope has parallax knob indicators for approximate value for 100-, 200-, 500-, and 800-yard distances. There's a proprietary hydrophobic seven-layer multi-coated lens, and other features selected to give Apex's customers top performance. The scopes are certified IP67 dustproof/waterproof, and 1200G shockproof. THE BEST WARRANTY YOU'LL NEVER HAVE TO USE. WORLD-CLASS SUPPORT WHEN YOU DO, THAT IS OUR OATH TO YOU! All of our products carry a Lifetime Warranty. We’ll replace any product if it’s not up to our standards of quality and durability, no questions asked. If something stopped working as it should, then let us know and we’ll take care of it at no cost to you. The only things we don’t cover are “Acts of God” like fire, lighting strikes and flooding. Most of those scenarios are typically covered by your insurance. We also don’t cover theft or intentional/neglectful damage or destruction.

categories:GunsSporting Goods

76390 impressions

4949 views