Like-new Model 1892 Saddle Ring Carbine, .357, with 20" barrel and beautiful case coloring. Classic wood-frame lever action—nothing beats the feel and smooth rack of a quality rifle like this.

categories:GunsSporting Goods

11568 impressions

992 views

Like new condition in a black rimmed frame excellent for any military collector. 17”x21”inches Can’t ship anywhere, Please see my other ads for rare and collectables

categories:GunsSporting Goods

28854 impressions

387 views

Extremely rare Smith & Wesson No 3 chambered in 455 Eley with target sites and a 1-9/16 inch cylinder Was a special order. This revolver still retains about 75% of the original bluing it comes with a 7 1/2 inch barrel checkered walnut grips showing where but good condition no chips or cracks. The trigger set is amazing. This revolver is one of twelve ordered and shipped to Birmingham England in 1905, this revolver frame was produced prior to 1888 as documented and is considered an Antique status in Canada. Smith & Wesson factory letter included. PAL not required

categories:GunsSporting Goods

68394 impressions

4102 views

Universal Plastic Shotgun Case. Holds one shotgun with barrel and sabgage tubes, solid plastic frame inside fabric covered. Used, condition as pictured.-$250.00 (36X7"outside/35.5X6" inside).-$250.00Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Please send message to: medal1958@gmail.com

categories:GunsSporting Goods

317 impressions

32 views

Please text anytime 6476871484. Fully functional antique revolver in mechanically perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44 New Model No. 3 Top Break, .44 Special / Russian Revolver. This one is in very good condition with longer 1 9/16 cylinder and can shoot both .44 Special and 44 Russian ammo. The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 6.5-inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 10438, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

847 impressions

415 views

Please text anytime 6476871484. Fully functional double and single action revolver in perfect condition. Compact pocket revolver high quality and can fit in the palm of your hand.. No PAL required. Comes with FRT paperwork. Belgian "British Bulldog", .44 Webley CF Revolver and the cylinder compatible with 44 Russian. This one is in excellent condition. The nickel plating is intact with no flaking. The gun is marked "44" on the side. The cylinder shows the pre-1893 Belgian proof mark and post 1878 inspection marks. There are the initial "MV" stamped on the frame, which the mark of the foundry. The action is accurate and strong, and the cylinder indexes and locks properly without play. The bore of the 2 1/2-inch barrel is excellent and bright, with sharp rifling. The walnut grips are excellent and undamaged, with no wear. SN 5, excellent overall.

categories:GunsSporting Goods

1859 impressions

619 views

One of One Thousand Brand New, Unfired Bought about 2 weeks ago, just unboxed it once to take photos Comes with the box and everything else included in the package Henry's top of the line. With electroless nickel plating on the frame, buttplate, shell carrier, and magazine cartridge follower You can read more details about it here: https://www.henryusa.com/firearm/henry-original-silver-deluxe-engraved-edition/ Will consider trades particularly for a Ruger No. 1 RSI/ International or Beretta 694 12 Ga.  30" with TSK Stock Can ship for extra

categories:GunsSporting Goods

1074 impressions

355 views

The Browning Buck Mark URX Pellet Pistol air gun from Umarex Airguns utilizes a single stroke break barrel cocking mechanism that’s easy to operate even for smaller framed shooters..177 Caliber Pellet, Break Barrel Action, Spring Powered,320 FPS. Brand new. Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Must be 16+. Please send message to: medal1958@gmail.com

categories:GunsSporting Goods

16765 impressions

841 views

Have grips for Ruger revolvers, Mark series 22, Detonics factory rosewood (New), Derringer (German I believe), Hogue mono grip for S&W I believe and N frame S&W. Also grips to fit CZ 75/85 pistols with shipping extra.RUGER WOOD GRIPS AND SELF FINISHING GRIP HAVE BEEN SOLD Colt 1911 have colt logo and wood.

categories:GunsSporting Goods

29198 impressions

1707 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

6797 impressions

270 views

Howdy Townpost. This is a nice little and good conditioned pocket tip-up revolver, in .32 RF long. These were made by Marlin from 1875-1887 with a total of 33,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's some frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the hard rubber grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

6021 impressions

211 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5236 impressions

147 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

11646 impressions

520 views

Lee Enfield No.4 Mk1 .303 British 10 round Mag Bolt Action Rear Adjustable 1300yds Peep Ladder Sight with a fixed distance folded down aperture battle sight calibrated for 300yd/274m. The No.4 Mk1 has a heavier barrel than the previous version No.1 MkIII. VERY GOOD CONDITION. Marks and Numbers: Matching numbers on bolt and frame. 18.5 TONS Proof, 22.25 Inch Barrel, 2.222" F19, Made in England, BNP with Crowns (BNP is the Birmingham Nitro Proof, means it was tested for the civilian market when it was sold from service, .303 calibre, 2.222 cartridge/chamber length). Left Side Receiver engraving: No.4 Mk1 F 2/49 PF8.259 = REBUILT 1949 February BY FAZAKERLEY. Solid blueing, Monte Carlo CHECKERED FOREARM AND PISTOL GRIP W/ CAP & CHEEK REST. BROWN VENTED RUBBER RECOIL PAD. SLING SWIVELS. Very good bore. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:GunsSporting Goods

46465 impressions

2210 views

Lee Enfield No: 1 Mark III 1938 GR1 Singapore SMTLE . 303 BRITISH 10 round Mag, full wood, swivels, bayonet lug with pig sticker bayonet included, rear brass butt plate with tool kit compartment, 2000m rear adjustable iron sight. Frame and butt stock medallion match. Mag number unreadable. Length: SMLE No. 1 Mk III: 44.57 in (1,132 mm) Barrel length: SMLE No. 1 Mk III: 25.2 in (640 mm) In late 1915 the Mk III* was introduced incorporating several changes, the most prominent of which were the deletion of the magazine cut-off mechanism, which when engaged permits the feeding and extraction of single cartridges only while keeping the cartridges in the magazine in reserve, and the long-range volley sights. The windage adjustment of the rear sight was also dispensed with, and the cocking piece was changed from a round knob to a serrated slab. Rifles with some or all of these features present are found, as the changes were implemented at different times in different factories and as stocks of parts were depleted. The magazine cut-off was reinstated after the First World War ended, and not entirely dispensed with in manufacturing until 1933. The SMLE Mk III* (renamed Rifle No.1 Mk III* in 1926) saw extensive service throughout the Second World War, especially in the North African, Italian, Pacific and Burmese theatres in the hands of British and Commonwealth forces. Australia and India retained and manufactured the SMLE Mk III* as their standard rifle during the conflict, and the rifle remained in Australian military service through the Korean War, until it was replaced by the L1A1 SLR in the late 1950s.The Lithgow Small Arms Factory finally ceased production of the SMLE Mk III* in 1953.

categories:GunsSporting Goods

31900 impressions

1291 views

I have for sale a replica 1860 Iron Frame Henry rifle. This is basically an exact scale copy of the original Henry’s. Rifle is fully functioning except the barrel has not been bored out ,therefore it cannot be fired. This would make an excellent conversation/display piece for hanging over the fireplace or ? Rifle is a replica therefore no PAL is required however, the purchaser must be a minimum of 18 years of age to purchase. $500 shipped.

categories:GunsSporting Goods

2329 impressions

413 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. Compact pocket revolver high quality and can fit in the palm of your hand.. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Forehand & Wadsworth " number 32 Double Action", .32 RF Pocket Revolver This one is in excellent condition. The nickel plating is intact. Factory Engraved. The action is crisp and strong, and the cylinder indexes and locks properly and tightly. The bore of the 2 1/2 inch barrel is very good and bright with sharp rifling. The grips are very fine and undamaged. SN 13745, excellent overall. ​ History & Background Sullivan Forehand was an employee of Ethan Allen, the famous New England gunmaker. In 1860 he worked in an administrative capacity when he met his future wife - Allen's daughter - at work, and after marrying into the family became a partner in the business. Henry Wadsworth, an officer in the union army, met another of Allen's daughters while still in service during the war, and married into the family as well. Upon his discharge from the army, Wadsworth joined the company which was renamed "Ethan Allen & Co." After Allen's death in 1871, the two sons-in-law took over the firm and renamed it "Forehand & Wadsworth. They would become well known especially for their bulldogs, but also their many fine pocket and large-frame revolvers, single-shot deringers and pistols. Forehand & Wadsworth remained in business until 1890 when Henry Wadsworth retired and Sullivan renamed the company "Forehand Arms". After Sullivan's death in 1898 the company foundered and was taken over by Hopkins & Allen in 1902.

categories:GunsSporting Goods

850 impressions

128 views

Please text anytime 6476871484. Fully functional double action revolver in perfect like new condition. No PAL required. Ammo is available but sold separately. Comes with FRT paperwork. French Model 1892 Service Revolver in 8mm lebel caliber, 4.5" barrel, 6 shot. Very well built and robust . Fiocchi manufacturers modern 8mm ammo as well. The action functions excellent in single and double action. Timing and lockup are good, lockup is rock solid. Bore and cylinder walls are very good . Exterior blue is intact. Original grips are in great shape with no cracks, lanyard ring is undamaged. The Model 1892 revolver (also known as the "Lebel revolver" and the "St. Etienne 8mm") is a French service revolver produced by Manufacture d'armes de Saint-Étienne as a replacement for the MAS 1873 revolver. It was the standard issue sidearm for officers in the French military during the First World War. The Modèle 1892 revolver is a solid frame revolver with the cylinder on a separate frame swinging right for manual reloading. The Modèle 1892 was first fielded in 1893 and was prominent among French military officers during First World War, and later the French police until the mid-1960s. A mechanically tight and very well finished handgun, the Modèle 1892 fires 8mm French Ordnance rounds also available online.

categories:GunsSporting Goods

14570 impressions

807 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot condition ,very smooth action. No PAL needed. Can shoot 32rf long and short. Comes with FRT RCMP paperwork. Smith and Wesson No. 2 "Old Model Army", .32 RF Revolver This one is in very good condition. With original blue. The action is strong and accurate, and the cylinder indexes and locks properly without play. The bore of the 5-inch barrel is very good, with sharp rifling and mirror bright. The rosewood grips are very good and undamaged. They look like they may have been re-varnished once. SN 59474, very good overall. History & Background Horace Smith and Daniel Baird Wesson acquired Rollin White’s patent (1855) for the bored-through cylinder to manufacture what they originally called the No. 1 revolver in .22 rim fire. It proved to be a rather ineffective little pocket revolver but was nonetheless very popular with civilians as a personal protective weapon. In 1861, just as the civil war gained momentum, S&W decided that they needed a larger caliber revolver in order to be able to convince the buying public (many of them enlisted in the war) that their gun was a viable protective option and as a back-up gun in battle. The scaled-up design was duly named the No. 2 and was nicknamed the “Army”, as it was widely used by military personnel as a personal side arm. Smith & Wesson retained and defended the Rollin White patent aggressively throughout the civil war period, and until its expiry in 1870, and therefore the No. 2 “Army” would be the only American made cartridge revolver used during this conflict (although several “unlicensed” makers added their wares into the fray, such as Uhlinger, Pond and Moore). The model is called “Old Model” due to its frame shape – the square butt and octagonal barrel of the model 1 ½ First Issue, as compared to the bird’s head grip and round barrel of the Second Issue. There is no “New Model” Army. The "No. 2 Old Model" was a popular personal side arm of many officers in the Union forces during the American Civil War, and is also known as the "Army" model. It was first introduced in 1861, and made until about 1874. The "No. 2" refers to the frame size, "No. 1" having been the first, .22 caliber pocket revolver and the "No. 3"'s being the large-frame revolvers. The 1 1/2 was introduced after the number 2, and since it fits in between the no. 1 and no. 2, it was named the no. 1 1/2. The no. 2 was owned by such famous Americans as General George Armstrong Custer and "Wild Bill" Hickok, the marshal of Deadwood...

categories:GunsSporting Goods

8001 impressions

321 views

Please text anytime 6476871484. Fully functional antique pistol no PAL required. Frank Wesson Single-Shot Pistol, .32 RF Short/Long RARE Frank Wesson, elder brother to Daniel Baird Wesson of S&W fame was an accomplished gunmaker when Daniel was still a boy. The two younger Wessons would apprentice with their oldest brother Edwin, and learn much of their expertise from this talented and versatile master. Frank would move to California in the 1850's, probably lured by the opportunities presented by the gold rush, making and repairing guns for the local needs. By 1859 he had moved back to Worceater where he set up shop in his own name. Frank is best known for his fine rifles, "bicycle rifles", deringers and single-shot pistols. Frank Wesson never ventured into the revolver market until he had partnered with his nephew Gilbert Harrington to form Wesson & Harrington. The revolver making business continued to evolve as Wesson & Harrington first, and then Harrington & Richardson.​ This is Frank Wesson's "medium frame" single-shot pistol, chambered in .32 rim fire. It is in excellent condition, with original blue. The little lever on the bottom of the frame releases the barrel lock when the hammer is in the safety position, and the barrel snaps open as it should. It will not open if the hammer is down, or fully cocked. The bore of the3 5/8 inch barrel is excellent and bright, with sharp rifling. The rosewood grips are very fine. This is an early model of the first variant, of which only about 1000 were ever made. SN 54, excellent overall.

categories:GunsSporting Goods

54285 impressions

3006 views

Please text anytime 6476871484. Fully functional antique revolver in mechanically perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44New Model No. 3 Top Break, .44 Russian Revolver This one is in very good condition. The the serial numbers match . The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 6-inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 5819, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

5473 impressions

238 views