WINCHESTER MODEL 37A,410 GA 26 IN CLEAN BORE BARREL CHAMBERED 3.0 IN. PREVIOUS OWNER REPLACED FRONT BEAD WITH WELDED ON HOME MADE BEAD AND ALSO INSTALLED SLING SWIVEL ON FOREND, THAT DOES NOT WORK AS WHEN YOU PULL ON SLING, THE GUN COMES APART , TO SOLVE THIS HE INSTALLED A PIN FROM RIGHT TO LEFT ON THE SIDE OF THE FOREND TO LOCK IT IN PLACE, THAT MEANT THAT YOU COULD NT TAKE IT APART ANYMORE, SO I REMOVED THE PIN, THE FRONT SWIVEL AND INSTALLED ONE THE BARREL AS IT SHOUL HAVE BEEN DONE BUT YOU HAVE 3 HOLES IN THE FOREND TO FIX. OTHER THAN THAT , ITS FINE. SHIPPING IS $50 ANYWHERE IN CANADA, CONTACT RENÉ AT 514 713 2310 OR ADCRENE65@GMAIL.COM

categories:GunsSporting Goods

2779 impressions

163 views

Exec cond New Boyd’s stock, laminated,c/w rings Willing to ship Model- M77 Mark || Cal- 7Mm REM mag

categories:GunsSporting Goods

51769 impressions

2718 views

Leupold - 1 pc Base - Rem 700 SA - Silver Leupold Medium Rings - Silver $75.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

21673 impressions

334 views

For sale is a Henry Big Boy 'All-Weather' lever-action rifle, chambered in .45-70 Govt. This model has a matte chrome finish on the metal. It has a 18.5" barrel, with semi-buckhorn iron sight (adjustable). It also comes with a picatinny rail pre-installed (for mounting optics). It has a side-loading gate as well as a removable tubular magazine! This rifle has been upgraded with following Ranger Point Precision (RPP) parts: RPP Henry Pistol Grip Stock (Black) RPP Henry Ranger M-LOK Handguard (Black) RPP M-LOK .45-70 Cartridge Quiver - Six Rounds It is in excellent condition with only 20 rounds (i.e., a box of ammo) through it!

categories:GunsSporting Goods

2352 impressions

151 views

For sale is a brand new Browning Maxus II semi-auto (gas-operated) shotgun. It is the 'Wicked Wing' (burnt-bronze cerakote) edition, with Mossy Oak camo. It is a 12 gauge model, with 3" chamber, and 26" barrel (rare). It has a raised (& ventilated) top rib (w/ red fiber optic front & white mid bead). It has rubber over-molded stock/forend grips. It has the Browning 'Inflex' interchangeable recoil pad. This model also has the magazine cut-off switch. It comes with 3× Browning Invector Plus "Goose-Band" extended chokes (F, M, IC). The factory take-down hard case, and all other original accessories (owner's manual, warranty card, cable lock, choke removal key, stock spacers & shims etc.) are included as well! It is in excellent plus condition, and has never been fired! It is the perfect shotgun for waterfowl hunting due to the rust proof finish! P.S. this shotgun retails for $2,750 + Tax (i.e., over $3,100 new). Save yourself over $600 dollars on a brand new shotgun!

categories:GunsSporting Goods

19452 impressions

599 views

Rifle is in great shape. Has an aftermarket stainless steel barrel 21” in length. Comes with a bushnell banner 3x9 scope. Ready to go. It’s a very light compact nice shooting rifle. Pickup in Lethbridge call 587 691 1657

categories:GunsSporting Goods

2458 impressions

327 views

Siderlock Safety Trigger Kit. Designed to fit Glock Gen 1-4 Models: G17, G17L, G18, G19, G29, G29SF, G20, G20SF, G21, G21SF, G22, G23, G24, G25, G26, G27, G28, G30, G30S, G30SF, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41, G42, G43X, G47, G48. Does Not Fit: Gen 5 Models. Siderlock Safety Trigger's Help Prevent Accidental Discharge!! The Glock pistol has a combination of three automatic safety features (trigger safety, firing pin safety and drop safety), which are sequentially disengaged when the trigger is pulled. The central pivot of the trigger is the first safety mechanism to disengage when the trigger is pulled and therefore the most important. The safety pin of the Siderlock trigger is a precise positioning system and when engaged blocks the movement of the central pivot avoiding an accidental discharge of the weapon. The Siderlock trigger offers the option of keeping the pistol in its original firing configuration simply by not engaging the lock. The Siderlock concept is simple: With a push on the safety pin a sliding pin acts to block or release the movement of the central pivot of the trigger, where by avoiding an accidental discharge when the slide is in the block position, and behaves exactly as the original Glock trigger when in the release position, all the while maintaining the original manufacture specifications. Once the Siderlock trigger is installed on the pistol, firing is accomplished by sliding the safety pin to the left prior to pulling the trigger. Preventing firing is obtained by simply sliding the safety pin to the right (Right hand Shooter assumed). For left-handed shooters, simply remove and invert the safety pin using the tools and instructions provided with the Siderlock trigger. No matter which position the slide is in it never extends beyond the trigger guard, avoiding any accidental contact with the holster ether inserted or withdrawn. Siderlock adheres to the same high manufacturing standards as Glock, using only high quality materials, a simple design and construction process, and therefore is guaranteed for life. Features: Replaces factory trigger. Adds an extra measure of safety. Avoids an accidental discharge. Maintains Glock original specifications, and fits all Glock Gen 1-4 models. Easy installation, includes detailed instructions and images. Ambidextrous and dismantled. High quality materials. Does NOT fit Gen 5 Models. See our complete line of Glock Products here Note: NDZ always recommends any part be installed by a qualified and trained gunsmith. NDZ promotes the use of safety practices and gear when working on any firearm. DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. Proposition 65: Click for Proposition 65 Warning Product Features Manufacturer: Siderlock Type: Trigger Safety Accessory Model: Safety Trigger Country/Region Of Manufacture: Made in USA Color: Black For Gun Make: Glock For Gun Generation: Gen 1-4 For Gun Model: G17, G17L, G18, G19, G29, G29SF, G20, G20SF, G21, G21SF, G22, G23, G24, G25, G26, G27, G28, G30, G30S, G30SF, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41, G42, G43X, G47, G48 Does Not Fit: Gen 5 Models

categories:GunsSporting Goods

18650 impressions

497 views

SWISS SCHMIDT RUBIN, MODEL: 1896/11 INFANTRY RIFLE, CALIBER: 7.5 X 55 Very good original condition 1911-1920 conversion date to M191 action.. SWISS SCHMIDT RUBIN, MODEL: 1896/11 INFANTRY RIFLE, CALIBER: 7.5 X 55, COMES WITH MUZZLE COVER, BORE IS VERY GOOD. VISIBLE NUMBERS MATCH. BARLEY CORN FRONT SIGHT WITH RAMP, ADJUSTABLE U NOTCHED REAR SIGHT, SILVER BOLT WITH RED POLYMER BOLT KNOBS. TWO PIECE FULL MILITARY WOOD STOCKS, FINGER GROOVED FOREND, MILITARY MODIFIED PISTOL GRIP, SMOOTH STEEL BUTT PLATE, SLING SWIVELS, STACKING HOOK, BAYONET LUG. METAL FINISH TURNING SILVER GREY WITH LIGHT PITTING, SCRATCHES, HANDLING MARKS AND WEAR. STOCKS SHOW DINGS, MARKS AND WEAR. ACTION: STRAIGHT PULL RIFLE, BARREL LENGTH: 30.75", CLASS: CANADIAN NON RESTRICTED. The Schmidt–Rubin rifles were a series of Swiss Army service rifles in use between 1889 and 1958. They are distinguished by the straight-pull bolt action invented by Rudolf Schmidt and use Eduard Rubin's GP90 7.5×53.5 and GP11 7.5×55 Schmidt–Rubin rifle cartridge. The Schmidt–Rubin 1896/11 rifle, or the Model 96/11, was a Swiss upgrade to the 89/96 rifles they had, to use the more powerful cartridge adopted as the GP11. The GP11 cartridge operated at a higher chamber pressure, which the 89/96 action could easily handle. The model 89/96 rifles were modernized by changing the three-groove rifled barrel to a new 4-groove type, adding a pistol grip to the stock, changing the magazine to the 6-round type used in the 1900 short rifle, and modernizing the sights. This also streamlined the appearance of the rifles. Because more rifles were needed than were available, the model 1911 rifle, with slight changes, was put into production. Almost all of the 127,000-plus model 89/96 rifles were converted to the 96/11 specifications. An improvement over the original 1889 version of the Schmidt–Rubin rifle, the Swiss M1911 placed the locking lugs in the middle of the bolt, rather than at the rear, strengthening the action and allowing a more powerful cartridge, the Gewehrpatrone 11 or GP 11 to be used. It is distinguished from the 96/11 rifle by a curved butt plate and by a stock with an integral semi-pistol grip. It uses a graduated tangent sight which begins at 300 meters. The 1911 and 96/11 rifles were made with excellent craftsmanship, and were exceptionally accurate. As Switzerland remained neutral through both world wars, remaining rifles are typically in far better condition than other European rifles of the time. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:GunsSporting Goods

30566 impressions

1320 views

SWISS SCHMIDT RUBIN K11 MODEL: 1911 Action CARBINE CALIBER: 7.5 X 55, COMES WITH MAGAZINE, BORE IS VERY GOOD, SHINY. MADE IN 1931, VISIBLE NUMBERS MATCH. BLADE FRONT SIGHT WITH EARS, ADJUSTABLE U NOTCHED REAR SIGHT, BROWN POLYMER BOLT KNOBS, SILVER BOLT. TWO PIECE FULL MILITARY WOOD STOCKS, FINGER GROOVED FOREND, PISTOL GRIP, SMOOTH STEEL BUTT PLATE, SWIVELS WITH METAL HOOK FROM SLING ON ONE OF THEM, STACKING HOOK, BAYONET LUG. METAL FINISH SHOWS SOME NORMAL SCRATCHES, HANDLING MARKS AND WEAR. STOCKS SHOW SOME NORMAL SMALL MARKS, SCRATCHES AND WEAR. ACTION: STRAIGHT PULL RIFLE, BARREL LENGTH: 23.25" CLASS: CANADIAN NON RESTRICTED. Excellent Overall Condition An improvement over the original 1889 version of the Schmidt–Rubin rifle, the Swiss M1911 placed the locking lugs in the middle of the bolt, rather than at the rear, strengthening the action and allowing a more powerful cartridge, the Gewehrpatrone 11 or GP 11 to be used. It is distinguished from the 96/11 rifle by a curved butt plate and by a stock with an integral semi-pistol grip. It uses a graduated tangent sight which begins at 300 meters. The 1911 and 96/11 rifles were made with excellent craftsmanship, and were exceptionally accurate. As Switzerland remained neutral through both world wars, remaining rifles are typically in far better condition than other European rifles of the time. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:GunsSporting Goods

33083 impressions

1399 views

Non-Restricted rifle Remington model P17, .30-06 bolt action, w/ bbl length 24" [Blued barrel and receiver. Fixed front, no rear sight. Fitted with Universal 4X32 scope. Sporterized wooden Monte Carlo stock with aluminum butt plate. Fitted with sling mounts. Marked NOT ENGLISH MAKE, logo with crown and BM on left side of receiver. Other markings include .30/06 NITRO PROOF etc. on barrel, BM logo on bolt but no serial number seen. Parts gun as receiver has a crack by the nitro proof marks. Bluing worn in use and handling areas. Two drilled and tapped holes on right side of receiver with corresponding notch removed on stock, presumably from once attached rear peep sight. Handling and storage marks on wood and metal. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code

categories:GunsSporting Goods

41666 impressions

2845 views

1) Remington No. 701 Rear Sight w/ Elevator $75.00 6) Remington Dovetailed Front Sights $75 - $85 7) 6-48 Filler Screws (4) - Blue - $20.00 8) 6-48 Pan Head Filler Screws (4) - Blue - $20.00 9) 6-48 Filler Screws (4) - Stainless - $20.00 10) 8-40 Pan Head Filler Screws (2) - $20.00 11) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

21782 impressions

499 views

Savage Model 93R17 bolt-action rifle chambered in .17 HMR with heavy barrel. Very accurate and well cared for, with a low round count (<100). Includes scope rings and a Weaver scope (3-9) already mounted and sighted in. Smooth action, crisp trigger, and excellent bore. The heavy barrel helps with consistency and heat management, making it a great choice for target shooting, varmint control, or range use. Stock and metal are in very good condition with only minor handling marks. A solid, reliable setup that’s ready to shoot as-is. PAL required. Local transfer preferred. Shipping available and on buyer. (The only trade I would consider is Remington 870, 12ga)

categories:GunsSporting Goods

2828 impressions

168 views

Winchester 9422 Cheyenne Centennial 20 “ carbine . Rifle is new and unfired in the original box complete with paperwork and hangtag. Produced in 1977 this sweet little 22 comes with an engraved gold plated receiver, and gold plated barrel bands. The beautiful walnut stock has a Cheyenne medallion in laid on the right hand side. The 9422 model Commemoratives had some of the lowest production numbers making these very rare in as new condition.I have just removed the grease from the receiver to take pictures. This is your opportunity to own a rare little Winchester that would also make a great Christmas gift. $2500 shipped

categories:GunsSporting Goods

3274 impressions

212 views

Remington Model 700 Left-handed 7mm Magnum. ***Reduced*** Burris Signature 3 - 9 X 40 Scope 24" Barrel with iron sights (Bead missing on Front sight) Butler Creek sling $800.00 OBO Will ship.

categories:GunsSporting Goods

4364 impressions

239 views

BUSHNELL TROPHY 3x to 9x by 40mm Model # 71-6102 Wide Angle Gloss Black 1” Tube Duplex Made by B&L in Korea VG Condition Excellent Coated Glass Remarkably Clear and Bright $135 More Pics Available Located on Ottawa Shipping and Insurance on Buyer  Thanks For Looking

categories:GunsSporting Goods

3956 impressions

203 views

All prices are plus shipping. New Sako optilock low 1 inch rings $100 (2 sets) New sako optilock extra low 1 inch rings $100 Stainless optilock 1 inch low rings and bases $150 Stainless optilock medium 1 inch rings with blued extension bases $sold Optilock 30mm low rings with extension bases $160 Sako optilock 30mm medium rings $85 Sako optilock 1 inch low missing ring inserts $50 Sako rimfire rings $50 ( 2 sets) Sako AV 1 inch rings and bases $80 Remington model 7 picatinny rail $35 New Ruger ring set 30mm sold Ruger m77 30mm medium rings from an M77(fits 50mm) $60 Browning BLR Bases and 30mm Leupold medium rings $60 Remington 700 Stainless rings and bases 1 inch medium rings $60 Leupold Qrw 1 Inch medium quick release rings $120 Leupold PRW 1 inch medium rings $95 Leupold 11mm rail rimfire rings $50

categories:GunsSporting Goods

24673 impressions

412 views

**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have a brand new Browning X-Bolt Target McMillan A3-5 Ambush Rifle in 6.5 Creedmoor for sale. It’s a precision bolt-action target rifle in a Carbon Fiber McMillan A3-5 stock w/adjustable comb and with a stainless steel 26" fluted bull barrel with muzzle brake. Featured in Urban Carbon Ambush camouflage it’s got an 60 degrees bolt throw with an extended bolt handle, an adjustable feather trigger, 4 rd detachable clip, Pachmayr Decelerator recoil pad, 20 MOA Picatinny optics rail and bipod rail. I am the first owner of this new rifle but have not fired the rifle. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. First Paid, First Served. 
Holds only with deposit. Delivery Negotiable.
 Buyer pays for shipping costs and makes arrangements for payment. DESCRIPTION Browning X-Bolt Target McMillan A3-5 Ambush Rifle, 6.5 Creedmoor. Made to the high standards you expect from Browning, this quality X-Bolt Target McMillan A3-5 Ambush Rifle is chambered in 6.5 Creedmoor and comes equiped with numerous features. These features include the Carbon Fiber McMillan A3-5 stock with an ajustable comb, a free-floating fluted barrel with a muzzle brake on 5/8-24 suppressor threads, picatinny rail for bipod mounting, a gray stainless steel 26" bull barrel, an adjustable feather trigger, detachable rotary magazine, a urban carbon ambush finish and more. Included with this bolt action rifle is two quick detach swivel cups, a 20 MOA picatinny rail, and a glass bedded receiver with a matte blued finish. The McMillan A3-5 stocks are US Marine proven tough, and are proudly featured on these X-Bolt models. PRODUCT FEATURES - Carbon Fiber McMillan A3-5 Stock Marine proven tough, this premium Carbon Fiber stock comes with an installed adjustable comb, textured gripping surfaces, palm swell, a Pachmayr Decelerator recoil pad, and finished in an Urban Carbon Ambush. This stock is a variation of McMillan's famous A-3 stock but with the addition of an A-5 type butt hook on the bottom of the butt. The flat on the bottom of the hook is about 3/4" wide. This stock comes with a thumbwheel elevator system which allows for precise vertical adjustments. With the adjustable comb you can adjust and align your sight plane to match the scope - Decked out 26" Long Bull Barrel Manufactured from gray stainless steel, this free-floating fluted barrel includes a muzzle brake on 5/8-24 suppressor threads, a thread protector, and an embedded target crown - Extended Bolt Handle, Feather Trigger, and 20 MOA Picatinny Rail This ambush rifle includes a steel constructed, glass bedded receiver that features a matte blued finish, a 60 degrees bolt lift with an extended bolt handle, an adjustable feather trigger, detachable rotary magazine, top tang safety, and bolt unlock button. The X-Bolt's three-lever gold plated Feather Trigger provides a clean, crisp pull with no take-up or creep and minimal overtravel. Attaching the ideal scope or accessory is easy with the aluminum manufactured 20 MOA Picatinny rail as well attaching a bipod or light to the included bottom rail SPECIFICATIONS Model Code - 035451282 Action Length - Short Action Barrel Length - 26" Overall Length - 46" Length of Pull - 13 5/8" Weight - 10 lbs 0 oz Magazine Capacity - 4 Twist Rate - 7" Barrel Finish - Satin Gray Stock Finish - Urban Carbon Ambush Receiver Finish - Matte Blued Chamber Finish - Polished Barrel Material - Stainless Barrel Contour - Bull Stock Material - Carbon Fiber Recoil Pad - Pachmayr Decelerator Checkering - Textured Grip Panels Sling Swivel Studs - 2 QD Cups Receiver Material - Steel Trigger Finish - Gold Plated Bolt Slide Finish - High Gloss Magazine Type - Detachable Trigger Material - Alloy

categories:GunsSporting Goods

26242 impressions

972 views

**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have a brand new Sako 85 Finnlight II Rifle, 30-06 SPRG, in a Cerakote Tungsten treated stainless steel action with an elastomer grip/black composite stock. It’s got a 22.4” fluted barrel, adjustable trigger (2-4lbs), 5rd magazine, and adjustable cheekpiece. SAKO Model #SBW3114A1930B4 I am the first owner of this brand new rifle but have not fired the rifle. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. First Paid, First Served.
 Holds only with deposit. Delivery Negotiable.
 Buyer pays for shipping costs and makes arrangements for payment. DESCRIPTION Building on the famous Finnlight name, the Sako 85 Finnlight II is an icon reborn. The lightweight RTM fiberglass stock makes the rifle light to carry and the barrel has been treated with a weather resistant Cerakote® coating, which makes this rifle the perfect choice for all conditions. The fully adjustable cheek piece also makes the rifle perfectly customizable for your preferences. SPECIAL FEATURES * HIGH QUALITY RTM FIBERGLASS STOCK 
The composite stock is manufactured with aerospace grade RTM technology. All Finnlight II stocks have carbon fiber bedding to ensure maximum accuracy and stability in all temperatures.
 * BARRELED ACTION 
Cerakote® treated stainless steel action for maximum weather resistance.
 * SECURE GRIP 
The grip surfaces and the cheek piece are made from robust elastomer.
 * ADJUSTABLE CHEEK PIECE 
Maximum precision and unique comfort for each shot. STANDARD FEATURES * ACTION 
Sako 85 actions come in six different sizes (CSA), providing reliable functioning for each caliber. All Sako 85 models feature controlled cartridge feed (RCS) to eliminate double feed or cartridge jams. The turn-bolt handle places the hand in a natural position during bolt operation, which allows for rapid repeated firing.
 * BARREL 
Sako 85 barrels are manufactured with a passion for craftsmanship and the very best knowledge of Sako. Barrel blanks are drilled, honed, cold- hammer forged, finished and finally individually inspected by an optical fine-tuning instrument: the human eye. Twist rates are chosen for each caliber to optimize accuracy and bullet performance. Sako 85 barrels, blued or stainless, have a non-reflecting, satin-like surface – with the exception of the Sako 85 Deluxe and Safari models that have a highly polished finish.
 * MAGAZINE 
The staggered, two-row magazine of the Sako 85 is made of stainless steel. The detachable magazine can also be loaded through the ejection port. The Total Control Latch (patent pending) of the Sako 85 prevents accidental magazine release.
 * SAFETY 
The special two-way Sako safety locks both the trigger and the bolt handle. The unique bolt release button of the Sako Safety System allows you to load or remove a cartridge from the chamber while the safety is engaged.
 * SIGHTS 
Most of the Sako 85 models with a blued finish on the barrel are available with either standard or optional adjustable iron sights. The front bead is adjustable in elevation and the rear blade in windage.
 * STOCK 
The ergonomics of Sako 85’s walnut and synthetic stocks are built for an optimal shooting posture. The excellent balance and smooth bolt operation of Sako 85 rifles enable fast, straight and accurate operation.
 * TRIGGER 
The weight of pull of the single- stage Sako 85 trigger unit is adjustable from 1 to 2 kg (2–4 lbs). An optional single-set trigger is available for most Sako 85 models. All Sako 85 rifles have an extremely durable, all-steel trigger guard that protects the trigger. An exception to this are the Finnlight and Carbonlight models, which have a lightweight hard-anodized aluminium trigger guard. SPECIFICATIONS MPN - SBW3114A1930B4 Caliber - 30-06 Sprg Receiver Size - M Handedness - Right Weight - 2.8 kg / 6.17 lbs Total Length - 1090 mm / 42.9 in Barrel Length - 570 mm / 22.4 in Rate of Twist - 1:11" Magazine - Detachable Magazine Capacity - 5 + 1 Trigger - Single Stage Trigger Stock Material - Composite Stock Finish - Black Material - Cerakote Tungsten Muzzle Thread - No Cheek Piece - Adjustable Open Sights - No

categories:GunsSporting Goods

32199 impressions

943 views

Black synthetic left handed Model 11 in 7mm-08 Remington, lightly used Includes a Nikon 3–9x40 scope with BDC Reticle

categories:GunsSporting Goods

1183 impressions

112 views

Likely the best caliber for Elk and Moose. 26"  barrel, all original, low round count. A classic beauty with no issues. Non threaded  muzzle, rifling excellent, included rings and base as shown. NO issues. Low round count.  More photos available if serious.  Please use cell phone text messaging." 403 556 0086 Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference

categories:GunsSporting Goods

4650 impressions

271 views

Remington 783 .308 win, 24" medium profile barrel, black cerakote finish barrel and action, flat dark earth color stock, it comes with a Vector Optics Scope, a picatinny rail, and scope rings. The scope is a Vector Optics Atlas 5-30x56 SFP Long Range Riflescope 35mm Tube, 1/8MOA illuminated, Elevation Range: 85MOA,Windage Range:85 MOA German HD Schott glass. Specification Model: Remington 783 Action: Bolt Magazine Type: Detachable Stock Type: Fixed Trigger Type: CrossFire Muzzle Type: Threaded Magazine Capacity: 4 Caliber/Gauge: 308 Winchester Twist Rate: 1:10″ Receiver Material: Steel Stock Material: Synthetic Barrel Finish: Matte Blue Stock Finish: Flat Dark Earth Barrel Length: 24″ Length of Pull: 13-3/8″ Overall Length: 43-5/8″ Weight: 7 lb Drop at Comb: 1″ Drop at Heel: 1-5/8″ Barrel Type: Medium Profile Button-Rifled To purchase this rifle, must comply with the law, I am required by law to see two pieces of ID: possession of firearms license and a piece of ID. I do offer shipping Canada-wide at the buyer's expense.

categories:GunsSporting Goods

75550 impressions

2883 views