1) Redfield WB-670 Receiver Sight Mounting Plate w/ screws (0.60" C-C) - $45.00 2) Redfield R-40x Receiver Sight Mounting Plate w/ screws (0.60" C-C) - $45.00 3) Redfield 75 Mounting Block 75 RTA (.83" C-C) 1.12" Long - $15.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

28469 impressions

858 views

For sale — Weatherby Mark V (.300 Weatherby Magnum) Beautiful Weatherby Mark V chambered in .300 Weatherby Magnum. Good condition overall with a high‑grade wood stock (some marks from use consistent with normal handling). Smooth action and ready for the field. Estimated manufacture note: This rifle bears serial number H134033. The “H” prefix on Mark V serials generally indicates Howa (Japan) manufacture, and Weatherby Mark V rifles with an H prefix were produced during the era when Weatherby contracted builds to Howa (roughly 1972–1994). Based on the H prefix and community serial‑range resources, this serial sits within the later Howa production blocks, most likely manufactured in the 1970s–1980s/early‑1990s. (This is an informed estimate, not an exact factory date.) Price: $1599.99 If you have any questions or would like more pictures, feel free to call, text or email! +tax (12% in BC, 5% outside BC) +shipping Local pickup is available. 📞 250-753-3355 (Call or Text) Must have your PAL to purchase.

categories:GunsSporting Goods

7036 impressions

526 views

This is a nice vintage Charles Lancaster 12ga side by side shotgun. By the serial number it is dated 1893. Block Lock Beesley Patent Spring Opening Action Barrel length 30" If you have any questions or would like more pictures feel free to call, text or email! 
+tax(12% in BC, 5% outside BC)+shipping 
Local pickup is available.
 250-753-3355 (Call or Text) 
Must have your PAL to purchase.

categories:GunsSporting Goods

15919 impressions

674 views

Czech K98k in 8x57 Manufactured after WWII at Brno factory.The L serial block id makes it 1946-1947. All numbers matching except the safety and cocking piece were numbered when factory was reusing some old parts. Matching number laminated stock. This is the K98k that was the predecessor to VZ24. It has the typical rampant lion crest. Turned-down bolt handle. Very clean example. Excellent shape. No rust. Value is $1600-$1900 condition depending. This one is very clean in excellent+ condition. Price is $1600 obo. Located in Calgary. Will ship within Canada. Buyer pays shipping. Valid PAL and gun transfer reference number will be required.

categories:GunsSporting Goods

7131 impressions

595 views

Classic single-shot Ruger No.1 in .45-70 Government. Excellent overall condition. Mechanically tight, clean bore, and a crisp, predictable falling-block action. Shoots very well: accurate from bench or standing, with a smooth, light trigger and rock-solid lockup that makes it a reliable choice for big-game hunting or precision single-shot range work. Stock and metal finish are well cared for with only minor handling marks consistent with careful use. Comes as pictured (no accessories included). Notes for buyers: Buyer must comply with all provincial/federal firearms transfer laws and present a valid firearms licence. Please text or email for additional information/pictures. No Trades. Rifle is located in North Battleford. I regularly travel between Calgary, Edmonton, Red Deer and Saskatoon and can meet at a mutually convenient midpoint. If any of those cities work for you I can arrange to meet there or somewhere in between along the route. Please suggest a location and time and I’ll do my best to accommodate.

categories:GunsSporting Goods

9734 impressions

592 views

Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g

categories:GunsSporting Goods

78007 impressions

2343 views

As new with numbers matching bayonet, unfired. Now $2500 Must have a PAL. No shows get blocked on Town Post and on my cell.

categories:GunsSporting Goods

17785 impressions

483 views

Please feel free to ask any questions and ask for pictures or more information about anything you see interesting Remington shotgun parts Remington 1100 3" magnum barrel $250 X9 Remington 1100 12g feed latches $40 ea X3 1100 breech blocks $50-ea Remington 870 20ga breech bolt $50 x3 1100 remington locking bolt $25 ea x2 Remington 11/48 16ga trigger assy $140 ea x2 Remington 1100 ga standard breech bolts $80ea x2 Remington 870 16ga breech bolts $50 ea x2 Remington 58 12ga breech bolts $80 ea x2 Remington 11-48 20ga trigger groups $140 ea x2 Remington 11-48 .410 trigger groups $140 ea Remington 11-48 12ga trigger group $140 Remington 11-87 20ga black synthetic forend $30 Winchester shotgun parts Winchester 1200 12ga parts lot $130 Win 1400 barrel $175 Win 1400 2 3/4 reciver $130 Win 140 reciver $150 Win 140 parts lot $125 Winchester mod 50 barrel $100 Winchester mod sx1 Barrel $125 Win 1200 20ga barrel $100 X2 new in package complete ATI tactical black shotgun forend kits for remington 870, mossberg 500/535/590/835 and winchester 1200/1300 $20 each Ithaca 37 shotgun parts lot $130 Mossberg 500 12 ga barrel $175 Mossberg 500 12 ga barrel $175 Mossberg 500 breech block $50 X2 new black falcon black synthetic mossberg 500 forends $15 each Mossberg 535 barrel $175 Marlin 5510 super goose gun bolt $175

categories:GunsSporting Goods

26043 impressions

1550 views

This is a .22 competition target Vickers rifle made in the 1930s, some time between 1934 and 1939. It is a 44 1/2" long, quite heavy beast with the Vickers signature 'relieved' barrel-to-fore stock mounting, apparently to enhance the accuracy. It utilises the narrow, falling block, Martini-type action. The bore is bright and shiney, with crisp rifling. It has competion-type fore and rear sights. Overall it is in good to excellent shape. The only thing of note is that at some point a previous owner drilled a line of holes underneath the forestock, which have been filled. The images give an idea of the overall condition of the rifle. A current PAL will be required. Thank you for your interest.

categories:GunsSporting Goods

3017 impressions

171 views

Looking to trade my pedisoli rolling block 45-70 for a ruger 44 mag carbine

categories:GunsSporting Goods

1689 impressions

149 views

Wow, here’s something that you don’t see everyday an Enfield-manufactured Lee-Enfield No. 1 Mk. III bolt-action shotgun. 25" barrel with bright bore chambered 410 Musket. Full-wood stock that comes with a detachable magazine! (Usually missing and single shot with a wooden block). Comes with period correct canvas sling. Factory open sights. Finish off your Enfield collection with this beautiful piece or add it in. This one is unique! Bayonet add $225* * I will except payments if needed Will Ship anywhere in Canada,

categories:GunsSporting Goods

82929 impressions

3188 views

Remington rolling block in 32-40 win cal. unmarked 21 inch round barrel , VERY GOOD SHAPE FOR HIS AGE, Rifle weights is 8 pounds , Mechanically perfect action , Stock does have a Crown stamped , G.C. in border stamped on top of stock , the number 62811 on lower side stamped into wood , and near the hammer mark 1864 . the last owner was shooting with it . ( All Canada shipping via Canada post and shipping at the buyer's expense ) you need valid Pal the only payement accept is E-Transfer or cash for reference you can take a look to my reviews the best way for communacation is TEXT CEL PHONE , OR EMAIL ME toymacram@hotmail.com or by Townpost. NO TRADES NO LOW BALLERS

categories:GunsSporting Goods

22830 impressions

4693 views

For sale is a Chiappa 1874 Sharps Sporting Competition rifle chambered in .45-70 Govt. It is a single-shot, falling-block rifle, with double set triggers. It has a 32" heavy octagon barrel (w/ an OAL of 49"). This model has a hand oiled walnut stock and forend, with beautiful color case hardened finish on the action. It has a blade (front) and ladder (rear) sight (adjustable for windage & elevation). It is in great condition with only one box of ammo (i.e., 20 rounds) through it. This rifle weighs over 10 lbs!

categories:GunsSporting Goods

11463 impressions

748 views

For sale is a Ruger #1 (No. 1) single-shot falling block rifle chambered in .300 Win. Mag. This model has a grey laminate stock/forend, and blued metal (action/barrel). It has built-in iron sights, and comes with a set of 1" rings (steel) for mounting a scope. It also has sling swivel studs. This rifle has a top-tang safety. It is in great condition, with normal usage marks. This Ruger #1 is a 1994 year of production.

categories:GunsSporting Goods

8231 impressions

397 views

For sale is a Winchester Model 70 Coyote Light SR (Suppressor Ready) bolt-action rifle in .270 WSM. It has a 24" medium-heavy stainless steel fluted barrel (w/ 1-10" twist rate), threaded (5/8"×24) for a muzzle device. It has a Bell & Carlson™ lightweight fiberglass composite stock (w/ aluminum bedding block) and Pachmayr® Decelerator recoil pad. It comes with the M.O.A trigger system. This model has a matte blued control-round feed action (w/ three-position safety), and hinged floorplate magazine (w/ 3+1 round capacity). It comes with a two-piece picatinny rail for mounting a scope. It is in excellent plus condition with very low round count!

categories:GunsSporting Goods

10298 impressions

441 views

Experience stability and precision with the Block Rifle Rest, designed specifically for rifle enthusiasts looking to enhance their shooting experience. This rest is crafted to accommodate a wide range of rifle types, ensuring a secure fit and minimizing setup time. Ideal for both novice and seasoned shooters, the Block Rifle Rest offers a solid surface to rest your firearm, allowing for a steady aim and improved accuracy. Its compact and durable construction makes it a great addition for shooting sessions at the range or in the field. Rifle rest dimensions are 8.6 inches high by 6.6 inches wide by 3.1inches deep. $25 each plus shipping. Willing to combine shipping or meet face to face in Kamloops.

categories:GunsSporting Goods

2162 impressions

124 views

Siderlock Safety Trigger Kit. Designed to fit Glock Gen 1-4 Models: G17, G17L, G18, G19, G29, G29SF, G20, G20SF, G21, G21SF, G22, G23, G24, G25, G26, G27, G28, G30, G30S, G30SF, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41, G42, G43X, G47, G48. Does Not Fit: Gen 5 Models. Siderlock Safety Trigger's Help Prevent Accidental Discharge!! The Glock pistol has a combination of three automatic safety features (trigger safety, firing pin safety and drop safety), which are sequentially disengaged when the trigger is pulled. The central pivot of the trigger is the first safety mechanism to disengage when the trigger is pulled and therefore the most important. The safety pin of the Siderlock trigger is a precise positioning system and when engaged blocks the movement of the central pivot avoiding an accidental discharge of the weapon. The Siderlock trigger offers the option of keeping the pistol in its original firing configuration simply by not engaging the lock. The Siderlock concept is simple: With a push on the safety pin a sliding pin acts to block or release the movement of the central pivot of the trigger, where by avoiding an accidental discharge when the slide is in the block position, and behaves exactly as the original Glock trigger when in the release position, all the while maintaining the original manufacture specifications. Once the Siderlock trigger is installed on the pistol, firing is accomplished by sliding the safety pin to the left prior to pulling the trigger. Preventing firing is obtained by simply sliding the safety pin to the right (Right hand Shooter assumed). For left-handed shooters, simply remove and invert the safety pin using the tools and instructions provided with the Siderlock trigger. No matter which position the slide is in it never extends beyond the trigger guard, avoiding any accidental contact with the holster ether inserted or withdrawn. Siderlock adheres to the same high manufacturing standards as Glock, using only high quality materials, a simple design and construction process, and therefore is guaranteed for life. Features: Replaces factory trigger. Adds an extra measure of safety. Avoids an accidental discharge. Maintains Glock original specifications, and fits all Glock Gen 1-4 models. Easy installation, includes detailed instructions and images. Ambidextrous and dismantled. High quality materials. Does NOT fit Gen 5 Models. See our complete line of Glock Products here Note: NDZ always recommends any part be installed by a qualified and trained gunsmith. NDZ promotes the use of safety practices and gear when working on any firearm. DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. Proposition 65: Click for Proposition 65 Warning Product Features Manufacturer: Siderlock Type: Trigger Safety Accessory Model: Safety Trigger Country/Region Of Manufacture: Made in USA Color: Black For Gun Make: Glock For Gun Generation: Gen 1-4 For Gun Model: G17, G17L, G18, G19, G29, G29SF, G20, G20SF, G21, G21SF, G22, G23, G24, G25, G26, G27, G28, G30, G30S, G30SF, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41, G42, G43X, G47, G48 Does Not Fit: Gen 5 Models

categories:GunsSporting Goods

15449 impressions

419 views

1) Barrel Sight Double Mounting Block - .47" W - .17" H (5/8" C-C) - $15.00 each - 3 Available 2) Barrel Sight Mounting Block - .47" W - .30" H (5/8" C-C) - $15.00 each - 2 Available 3) Barrel Sight Mounting Block - .47" W - .33" H (9/16" C-C) - $15.00 each - 2 Available --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

12623 impressions

289 views

For sale is a rare Ruger #1 (No. 1) single-shot falling block rifle chambered in 7×57mm (7mm Mauser). It is the RSI (International) model with 'Mannlicher' (i.e., full) stock. This model has a checkered walnut stock/forend (w/ Ruger's red rocoil pad), and blued metal (action/barrel). It has built-in iron sights, and comes with a set of 1" rings (steel) for mounting a scope. In addition, the receiver is drilled and tapped for a scope side-mount. It also has sling swivel studs, and comes with a beautiful leather sling. This rifle has a top-tang safety. It is in excellent condition, with low round count (the bore is shiny with strong rifling). This Ruger #1 was shipped in 1990.

categories:GunsSporting Goods

3318 impressions

300 views

Torkmag G-Block Conversion Kit Features: Compatible with all Mil Spec AR-15 Lowers No Modification to the lower necessary Duel Block System is held firmly in place with set screws (Included) Use with factory Glock Mags, Torkmag 9mm Magazine and .40 S&W Cal Glock Magazines Pickup GTA Ship on buyer

categories:GunsSporting Goods

2187 impressions

105 views

Brand new Non-restricted Semi-Auto Caliber: .308 Winchester Barrel Material: AISI-SAE 4140 ( 42CrMo4) Barrel Finish: Melonite Receiver Material: 7075 T6 Aluminium Alloy Magazine Capacity: 5 Rnd. Removable Magazine Barrel Length: 20" Operation: Gas Operated Semi Automatic Safety: Trigger Block Sight: Adjustable Fiber Optic Sights Length: 42" Weight: 6.6 lbs Front Fixed Sight Rear Adjustable Fiber Optic Sight Pic Rail Integrated Cross Bolt Trigger Safety Swivel Studs Coming with: 2 magazines Made in Turkey

categories:GunsSporting Goods

13338 impressions

1449 views