Selling a BKA 98 Replica Colt 45 Revolver. In overall fair condition and cycles as intended. Selling for $275. No PAL required as it is a replica. Shipping available at buyers expense. Disclaimer: this item is sold as is and the description is given to the best of my ability and knowledge. Feel free to ask any questions and I will do my best to assist in any way possible. Do not buy this item if you are not sure about it as no refunds will be given. 

categories:GunsSporting Goods

3304 impressions

279 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

25595 impressions

891 views

Please text anytime 6476871484. Fully functional antique revolver in mechanically perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44New Model No. 3 Top Break, .44 Russian Revolver This one is in very good condition. The the serial numbers match . The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 6-inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 5819, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

14037 impressions

574 views

Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Test fired with smokeless powder. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Colt M1892 "New Army" Revolver has significant improvements over M1889 with better locking and indexing mechanism. This one is in excellent condition. The nitre blue on the trigger and hammer is well visible and retains 95% of original blued finish. The action is strong and accurate, and the cylinder indexes and locks properly with zero play on trigger pull. The bore of the 4 1/2 inch barrel is excellent and mirror bright with perfect strong rifling. The markings are sharp and defined throughout. Extractor working as it should. The assembly numbers on the cylinder, crane and frame. The original grips are good and undamaged.​​ S/N 13345 History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand.The 1889 model would remain in production for 18 years, with significant improvements in 1892, 94, 95, 96, 1901 and 1903. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:GunsSporting Goods

19728 impressions

1167 views

Antique Colt 1851 London Navy .36 cal. She's in Great shape. The bore has some minimal wear, but it's clean with no pitting or rust. Mechanically, the gun is in pristine condition It shoots great and is a lot of fun. Specifications-Year of Manufacture: 1853 Caliber: .36cal Ammunition Type: Cap and Ball Barrel Length: 7 1/2 inches Overall Length: 13 inches Action: Single Action Feed System: 6 Shot Revolver. Text or call if interested. (506) 502-7559

categories:GunsSporting Goods

600 impressions

102 views

This S&W No 2 .32 RF tip up barrel revolver is in VG-EX condition,both mechanically and cosmetically. It has a 5” barrel with light scattered pitting in the bore and 8/10 rifling VG+ shiny bore. The barrel/receiver break hinge is undamaged with no play,lock up is tight. No pitting on the frame,blueing is an honest 50%,grips in VG shape with no visible damage,no chips,gouges etc,just normal wear possibly revarnished if anything. Cylinder retains sharp teeth and Pitt free chambers,index & timing are perfect and hammer holds full cock strongly. Cylinder spins freely between hammer rest and full cock. This also comes with a period correct leather holster which is in VG+ shape,no tears,original stitching still in VG shape,it has been treated with Neatsfoot oil by myself to retain the leather’s suppleness as well as conditioning the stitching. Historically this type of mid size waist coat revolver was carried by Wild Bill Hickok as a gambling gun and a back up to his pair of Colt Navy .36 cap & ball revolvers. FRT VERIFICATION PAPERS INCLUDED NO PAL REQUIRED/ SHIPPING INCLUDED/ NO TRADES /PRICE FIRM / PROOF OF AGE (18) REQUIRED

categories:GunsSporting Goods

1013 impressions

85 views

Hi there patriotic Canadians, just a brief rundown of what kind of person I am and what I am after; fully understanding our constitutional rights is important as it completely contradicts any or most current thug like bans or officials ways of lying and trying to convince society we have no rights to own firearms responsibly it has been a right under God or a Born unto by every good Canadian who has earned the ability to responsibly use and or own any firearm within reason and certainly if we have paid our dues as those who have spent most of our lives protecting other Canadians where firearms are not used to defuse situations as it is a known fact this almost always makes things worse and more dangerous which is exactly why people like that who are responsible and understand that responsibility don’t need some bureaucrat who has never handled a firearm dictate to me or you if it’s some privilege that mommy and daddy are letting us maybe have sometimes a little; it utter nonsense we are better people and not criminals like the ones who pass these archaic “laws” and criminals making laws clearly don’t make them legal. All of this out of the way I hope I can find and deal with the right people potentially an old timer who has an older collection of my favorites like the antique 6 shooters single & double action, I have been searching for a good condition grandfathered type short barrel 38/22/44/ namely but not strictly I simply require or would like to meet or find a like minded person who is willing to part with a nice potentially original out of their collection to hand down ideally I am after makes and models like the Smith & Wesson/colt single army/Ruger and Taurus model types if we are speaking strictly collectors deep history antiques, Wanting ideally, a good .38 short revolver action that is either already no longer reg. traced or an updated 1930s-1960s model whether it a detective issue snub or a regular issue short barrel 6 shooter that still has a speed loader option or preferably a modified reconstruction and has a side gate loader for single rounds as these are the most utilitarian and essential esthetics. Good or some worn condition I’d expect in fact I prefer a good harms arm to have some wear showing it has reliability and is still fully calibrated and comes as is no need for bells and whistles just a feel good reliable piece that will out last another generation to come. If anyone is a serious owner and collector discreetness is also a right and key in this or any trade and I would hope to keep any dealings private as possible as is our God given rights as RPAL lifetime holders, my offers for a good piece and especially with its holster/belt and any extras I am open to trading some rare estate solid gold signet and precious gem men’s rings which from recent informal appraisals were multiple times the gold values even though the contents and purity are already above any nonsense from a sissy jewelry store chain. My items and rarities are very old well kept and made for a man who wants something of value for example one is a full set Blue Boulder Opal from a small family owned mine in the Australian Outback it’s one of a kind in the world and I am auctioning this one for sure again as last time it had a fins of traction I just did not get enough eyes on it and the auction slot paid for was too short otherwise I was very close to getting an extremely generous offer, but was unable to locate the bidder before it finalized such as are all silent “A”s I also have Solid gold bullion cuff that exceeds 2 ounces of 999.9 of the purest gold which can be shaped, clipped for divided uses even turned into other pieces with its content. I also have constitutional USA silver 90% dimes, and more bullion silver and some very old antique pieces going back hundreds of years. of course Cash talks and I am willing to do a straight cash deal split or show what other great items I have and own including prepper gear wonderful older leather 1800s style jackets and other small priceless artifacts such as meteor fragments and the likes. I’m sure based on my listing of potential items to trade for a decent .38 antique form revolver or something of similar greatness we can come to a more than fair even mutually beneficial trade again I respect peoples privacy and in any deals as long as it’s within our constitutional rights as the Law Abiding Canadians we are and shall always be allowed to do business at our hearts content going far back into our own heritage when trades like these were common place and no jackboot ever had a place nor legal grounds to meddle in our affairs: Remember nothing has changed we have just been told to forget. I’m not going to forget my God given rights and I hope you don’t either we all deserve them as freeborn People’s of Canada and Beyond. Please contact me as soon as you feel like throwing fisticuffs lol or just making some offers

categories:GunsSporting Goods

1689 impressions

116 views

Up for sale is my antique status Colt 1899 revolver in .41LC with rare 3" barrel. Functionally excellent, cylinder locks tight and indexes properly on every chamber. Retains about 70 percent of blued finish, has mild pitting at throat of barrel. Serial number dates this at 1893 production. Feel free to text for more for more info or pictures. Will come with antique status FRT paperwork. Asking $3500

categories:GunsSporting Goods

2488 impressions

274 views

Looking for a complete hammer assembly for an 1892 Colt DA revolver including stirrup and spur w/ spring. Refer to circled area in attached picture.

categories:GunsSporting Goods

2960 impressions

111 views

Have grips for Ruger revolvers, Mark series 22, Detonics factory rosewood (New), Derringer (German I believe), Hogue mono grip for S&W I believe and N frame S&W. Also grips to fit CZ 75/85 pistols with shipping extra.RUGER WOOD GRIPS AND SELF FINISHING GRIP HAVE BEEN SOLD Colt 1911 have colt logo and wood.

categories:GunsSporting Goods

31461 impressions

1806 views

Selling/trading a Colt RIA Commemorative .22 short revolver. Number 74 made. It's been welded solid and has no moving parts. Exterior is in good shape, one nasty weld mark on the left side of the barrel, muzzle isn't all that pretty. Grips are in good shape. Comes as seen with its original Colt presentation case. No PAL necessary to purchase, just proof of age (18+). Looking for $650 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:GunsSporting Goods

4464 impressions

501 views

Replace cracked, missing, and worn grips or safeguard your minty originals by swapping to a new pair that you're ok with taking a beating in the field. I am selling reproduction revolver grips for models of revolvers/handguns including antique and modern and can source plenty more if interested. I also have holsters for antiques available! Check my ads for more. Antiques were made before CNC machining, meaning there can be slight variation between different examples of the same model. Grips may be slightly oversize allowing them to be ground down to size, slightly undersize, or require minor adjustment of the interior face or grip peg hole to fit just the way you want. I can also get plenty of butt plates for shotguns and rifles. Inquire to see if I can help you. Also reach out if you need a leather holster to protect your revolver. Price starts at $100 per grip pair with shipping anywhere in Canada, discounts for bulk order possible. Current stock includes: Colt 1873 Single Action Army / Peacemaker ivory-like Colt 1877 Thunderer/Lightning .41 Webley Mark 1 (Mk I) for .455, .45 ACP, and .45 auto rim service revolver Webley Mark 2, Mark 3, Mark 4, Mark 5 (Mk II, Mk III, Mk IV, Mk V) for .455, .45 ACP, and .45 Auto rim service revolvers Smith & Wesson No. 3 New Model for .44 single action revolvers Smith & Wesson No. 3 Russian ivory-like for .44 Russian single action revolvers I can source most grips and butt plates for makes of pistols and long guns such as Beretta, Benelli, CZ, Colt, Forehand & Wadsworth, Harrington & Richardson (H&R), Hopkins & Allen, Ithaca, Iver Johnson, Luger, Marlin, Mauser, Pietta, Remington, Ruger, Springfield, Savage, Sig Sauer, Smith & Wesson, Stevens, Tokarev, Uberti, Walther, Webley, and more.

categories:GunsSporting Goods

36724 impressions

761 views

If you are looking for a reliable, sturdy, and protective holster for your collectible handguns, I can help. Don't go out into the bush or backcountry without a way to protect and safeguard your valuables! I have hand-made and custom fit holsters that work the following models, and more. Webley Mk 1-6, Webley WG, Smith & Wesson no. 3 variants, French MAS 1873 and 1874 models, Reichsrevolvers, Colt 1877 Thunderer, Colt 1878, Small and large frame Nagant types, Bodeo, Remington and Colt Cap & Ball Revolvers. Inquire with your model information and I'll do my best to match you with something that fits to your liking or money back after return. Prices range from $75-$150 I also have scarce period accurate Japanese Service Type 26 Shaped Top "Ham holsters" with removable shoulder strap and 12 round ammo pouch Designed for Japanese Type 26 revolver in 9mm/.38 cal And German Service Reichsrevolver M/1883 Holsters with 12 round ammo pouch designed for Reichsrevolver Model 1883 10.55 mm/.44 Russian Ships Canada wide. I don't like drama, and offer a money back guarantee of satisfaction.

categories:GunsSporting Goods

15976 impressions

618 views

For sale is my a mechanically great, all matching, 1880 production short barrel "Shopkeeper" Colt Thunderer in .41 LC. Selling because cash is tight. As an Antique, this handgun is exempt from Canadian licensing and registration requirements, and can be used anywhere a nonrestricted firearm would be legal. Black powder or light load smokeless .41 Long Colt rounds can be purchased online or worked into deal. The 1877 line of revolvers was Colt's first double action model ever produced. They made almost 170,000 from 1877 to 1909 with three main designations: the Colt "Lightning" in .38 LC, the "Thunderer" in .41 LC, and the "Rainmaker" in .32. However, due to Canada's laws, only the .41 caliber ones are designated as "antique". This is luckily one of those guns, and it needs no registration or licensing to own. These models are highly collectible handguns, particularly the short barrelled "Shopkeeper" model due to its easy to stow nature. Arizona Wild West gunslinger Doc Holiday carried one of these. This particular example, SN 22261, was produced rather early in 1880 and has a short but accurate 3.5" barrel. All parts match, and the exterior retains an excellent 85% of the original nickel. The internal mechanics are incredibly clean and original. The bore is fair with strong defined rifling. Grips are nice like-new repros with rampaging Colt medallions. All hammer clicks are present, lockup is rock solid, and the trigger pull is pleasant in both SA and DA. The barrel is stamped with the Hartford Connecticut Colt address and the acid etched "COLT D.A. 41" is still visible. The left side of the frame displays the 3 line 1871, 1874, and 1875 patents. It reads "41 CAL" on the trigger guard. Can work ammo into deal with PAL No PAL required for revolver Must be 18 Comes with FRT page Ships within Canada Check out my profile for more antique handguns! I make no claims about the safety of firing ANY Antique firearm. Consult with a gunsmith first.

categories:GunsSporting Goods

19958 impressions

1373 views

*Sold* Parting with my Colt 1878 revolver. She's single and double action, chambered in .476 Eley which is interchangeable with .455 Webley. These revolvers were most commonly chambered in .44-40 Winchester and dubbed the "Frontier Model", with the .476 chambering being very scarce. They were introduced in 1878 as a larger frame, larger caliber twist on the new Colt 1877 Thunderer/Lightning model, filling a niche most similar to the 1873 Single Action Army, but this time in double action as well. Selling to clear up some moolah for car repairs. Pre-1898 Canada legal antique. This revolver was made in 1885. It has the desirable Pall Mall one line address on the barrel reading "COLT’S PT.F.A. MFG. CO. HARTFORD CT. U.S.A. DEPOT 14. PALL MALL LONDON" with most words still visible. This address is a rarity and was only put on guns intended for the European markets. Serials match 15xxx, with the last 3 digits stamped on the cylinder. The loading gate is a replacement. This gorgeous revolver has an extremely nice black finish with shiny nickeled highlights on the hammer, trigger, and hammer screw. The visual condition speaks for itself. A stunning piece sure to catch eyes, and assurance that the metal will remain protected. The rifling is still strong and defined, showing some scattered frosting. The grips appear original, and are sturdy with minor holster wear on the high points from time on the hip. The action is great. The internals are shiny in factory condition. The cylinder locks up airtight at firing position. I have never seen an 1878 or 1877 with tighter lockup. In the unique fashion of the 1878 model design, this revolver has no cylinder stop allowing slight backrotation when you disengage the action, but it still generally cycles. The loading gate is a bit wobbly, contributing to backrotation. You can read more here: https://www.americanrifleman.org/content/colt-1878-revolver/ A beautiful collector piece and functional revolver. Don't be a stranger, feel free to call or text if you have any questions. Comes with .455 Webley ammo for $125 if you have PAL. Check my ads for more antiques Ships Canada, 18+, no PAL required Comes with FRT antique report I make no claims about the safety of shooting ANY antique. Check with a gunsmith! Tags: .22, .32, .38, .41, .44, .450, .45, RF, CF, Boxer, Kynoch, ACP, auto, Colt, Smith & Wesson, Remington, Webley, British, America, Canada, Tranter, SAA, Single Action Army, WG, Target, Frontier

categories:GunsSporting Goods

46003 impressions

3593 views

Looking for any model Smith and Wesson or Colt Revolver 1898-1850 Negotiable on Price. Would like it to come with ammo and paperwork if applicable.

categories:GunsSporting Goods

4303 impressions

386 views

MEYERS ONLINE GUN AUCTION ESTATE OF RON SERBIN LATE OF WINNIPEG, MB ANTIQUE LONG ARMS : Sharps 1874 Hunters rifle * P. Bond 10ga fowler * Paget flintlock carbine * Mark II Snider Carbine * PISTOLS: Richard Constable cased dueling pistols * Clark fullstock flintlock * English Light Dragoon flintlock * Colt 1851 Navy revolvers * SWORDS FROM THE 1700’S AND 1800’S BLADES, DAGGERS & KNIVES - including Bowie CONSIGNORS: Sharps model 1869 * Spencer 56-46 sporting rifle * Martini-Enfield Carbine .303 Brit COLLECTOR, FACTORY & RELOAD AMMUNITION HUNTING RIFLES, SHOTGUNS & MUCH MUCH MORE BRADLEY MEYERS, AUCTIONEER ARDEN, MB, TEXT 204-476-6262 WWW.MEYERSAUCTIONS.COM

categories:GunsSporting Goods

24387 impressions

1236 views

PCI Ammo - 450 ADAMS REVOLVER Black Powder - 50 rounds AKA 450 Boxer Mk I, .450 Revolver, .450 Colt, .450 Short, .450 Corto, and .450 Mark III, and in USA as the .45 Webley These loaded to duplicate the original rounds of black powder loaded with 225gr RN Cast Lead Bullets loaded in custom modified cases

categories:GunsSporting Goods

10676 impressions

755 views

Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Tested with smokeless powder. Colt M1892 "New Army" Revolver has significant improvements over M1889 with better locking and indexing mechanism. This one is in excellent condition. The nitre blue on the trigger and hammer is well visible. The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 4 1/2 inch barrel is fine with good rifling. The markings are sharp and defined throughout. Extractor working as it should. The assembly numbers on the cylinder, crane and frame. The original grips are good and undamaged.​​ History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand.The 1889 model would remain in production for 18 years, with significant improvements in 1892, 94, 95, 96, 1901 and 1903. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:GunsSporting Goods

21104 impressions

2342 views

Please text anytime 6476871484. Antique revolver in ready to shoot like new excellent condition ,very smooth action. No PAL needed. Comes with FRT RCMP paperwork. Ammo is available but sold separately. This one is compact concealed carry version of famous Colt M1877 "Thunderer" was made for self defense and fast action. With "bulldog" type short barre and no regular extractor on the side this revolver made for concealed carry and optimised for fast action. The action is strong and crisp, and the cylinder indexes and locks properly, without any play in the cylinder. The bore of the 2 1/2-inch barrel is excellent mirror bright with strong rifling. The black hard rubber grips are very good and undamaged. SN 82458. ​ History & Background The M1877 was Colt's first double action revolver. Colt insisted on inventing their own double action mechanism, partly because there were numerous patents for DA revolvers in effect, which Colt did not want to infringe upon, but also because they trusted their chief engineers William Mason and C.B. Richards to come up with an original design. For this reason, the M1877's action is like a Swiss clock: it is somewhat convoluted and complicated, and it has earned the nickname "the gunsmith's favorite" over time. The gun did enjoy tremendous popularity however, and was manufactured for 32 years, even after Colt had improved the mechanism and simplified it considerably in later years. The M1877 was available in three calibers - .32, .38 and .41, and was originally called "Lightning". Later collectors coined the name "Rainmaker" for the .32 and "Thunderer" for the .41. In Canada, only the .41 caliber gun with serial numbers below 107,000 is considered an antique, as the others are either exempt calibers, or made after January 1, 1898.

categories:GunsSporting Goods

15140 impressions

1389 views

WANTED( not by fhe “man”): to buy or sell gold old silver US/bullion valuables straight cash for single action/double action old antique six shootet styles or others for example the Peacemaker types and any others in good condition but need any sold to be compatible with current ammos in centerfire type rounds however it’s possible that it would need to come disabled ie without the pin installed to be actually legal also if it’s not registrable than it is grandfathered already and am willing to take any of these kinds off someone who has one they either had handed down or don’t want as I’m a collector of not just arms but relics and antiques that often get sold and hidden by museums or end up lost in some landfill or at best a hidden collection this is specifically meant to be for my family business as anything of that age and from historically permitted period percussion arms are a big part of my grandfathers original business as are shipwreck memorabilia. Most of these are over 100 years old anyway but the ammo should be relarively the same and purchasable. As modern specific arms currently have embargoes, though the laws will likely change and get better once our corrupt dictatorship is gone. With resignations owners and shops are essentially just waiting for the laws to change back or get even better just an fyi. i spoke to shop owners and gunsmiths directly who know more than most about the situation. I will only take direct trades and im not gonna transfer funds first to some scammer - and I need to see the quality also various calibers are still allowed and there are legal ways of transferring many older hand arms. The embargo is based on the recent makes not the caliber necessarily. I know the laws and am not interested in debating what is what because I already learned many times over what is still doable and allowed… Looking to buy or sell gold old silver US/bullion trade of valuables straight cash or both for older styles of single/action semiauto or double action revolvers ie Peacemaker colts are top of my list and single action is preferred in long or shorter barrel but decent enough calibers in other makes that are reliable enough to hunt with and yeah people hunt with good single actions due to accuracy and taking time, but for now its for safety in large property and target shooting obviously however i am also interested in short arms like the ranch hands with a full stock minimum and with a good ring/swivel or carry system even a decent strap w/quick release and back/side holster and belt or inner chest holster for for any antique or upgraded revolvers throughout 38/357 preferably for the smaller arms may be up for the classic .45 pissibly newer type semis in 9/45 …it all depends on what is good & you are willing to part with or have to sell/trade that is interesting though the older the better as a collector, grandfathered is again most preferred if its nonscript while still restricted there are still protections for us around that, used condition is fine as long as its a solid arm with no missing parts or kinks, bumps bruises scratches are fine within reason given character. ive been a Sr Cybersec and international investigator for 20+ years in the private sectors but worked closely with Dallas Sheriffs/S.S./FBI field offices and others like Interpol. due to my work and as much as they tell us it isnt a right in Canada its only because they twist our Charter around just because it doesn't specifically mention GUN protection at arms could mean stick and that is our governments ba argument remember that it is your right, besides you always lose your best ones on fishing trips they just fall into the lake constantly its crazy how that keeps happening to me. Also in the market for decent and reliable long shortbows preferably stronger the better with rest site but minimal breakpoint wood is good or takdowns extra string/ers knocks arrows tips fletches and a good quiver potentally not really into compounds but am into also recurves old school with a decent enough draw on all to hunt mid range game at a fair distance easiest set up the better but while my back is still out im paying extra for delivery so if you have multiples if arms/bows im willing to make it worth your while if its all quality. again: Know your rights and freedoms and don't give up or in ever - its all in the Bill. They are suppose to be infallible and yet gov. seem to have violated almost every single line in our Charter when it comes to just living. Digressing; hit me up if you have anything old/like new/grandfathered especially.I have my RPAL at all times and am discreet with dealings as these are legal private transactions based on our legal rights and freedoms. Happy shooting. Stay safe and stay strapped. ty

categories:GunsSporting Goods

15902 impressions

986 views