Mossberg 500, 12 Gauge, 3 inch, Pump Action Shotgun — 24 inch, Camo Barrel, 3 inch Chamber, fully rifled cantilever (new) Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature All parts are sold as is and should be installed by A licensed gunsmith Condition : new This barrel does not use chokes Barrel length : 24″ Gauge : 12 Gauge Chamber : 3″ Action Type : Pump-Action Barrel Type : fully rifled cantilever Finish : Camo Rear sight : None Front sight : none Barrel Finish : Mossy Oak – Break-Up Country

categories:Sporting GoodsGuns

8721 impressions

869 views

Mossberg 500, 12 Gauge, 3 inch, Pump Action Shotgun — 28 inch, Camo Barrel, 3 inch Chamber (new) Reduced from 249.99$ to 219.99$ Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature All parts are sold as is and should be installed by A licensed gunsmith Condition : new No choke included, threaded for choke Barrel length : 28″ Gauge : 12 Gauge Chamber : 3″ Action Type : Pump-Action Barrel Type : Vent Rib Finish : Camo Rear sight : Bras Bead Front sight : White Bead Barrel Finish : Mossy Oak – Break-Up Country

categories:Sporting GoodsGuns

7883 impressions

708 views

Very good condition and very reliable 12ga semi auto shotgun. Turkish made by Saricam Silah Turkeys Military small arms manufacturer. These are the best of the Benelli clones out there and are very hard to get. Has steel sights and pic rail not plastic. Rubber grip not hard plastic. Parts compatible. Argo gas piston system. Adjustable 3 position rear stock. Adjustable for cheek weld aswell. Comes with +1 mag extension so you can legally load 5 of 3" or 6 of 2.75". 5 choke tubes and choke tube wrench. Can ship on your dime. This shotgun is very reliable. Zero issues as long as you keep the velocity of the ammo up. High brass, lo brass, cheap target loads, buckshot and slugs all work excellent. No need to worry about break in period, done long ago. 1/3 the cost of a Benelli and just as well made. There are lots of clones out there but these are the best. Will trade for Remington 870 Tactical type shotgun preferably with ghost ring sights and choke tubes.

categories:Sporting GoodsGuns

3383 impressions

215 views

This rifle was purchased and imported by me in 2010. I’m the original owner. This is a left hand bolt action .22lr, magazine fed 5 shot repeater. It has a 24” #3 Douglas barrel,OD green Kevlar stock w/cheekpiece. There are a total of 3-5 shot magazines plus one that needs work to function properly. I’ve ruined enough mags to know better than to try to fix it myself. The barrelled action was a satin finish that’s been Ceracoated. It has a Timney trigger and a Talley picatinny 0 degree rail, also two sets of different height 1” ULA proprietary rings also made by Talley. Includes two EB Rifleman 2.8-9X40 green anodized scopes with P4 reticle and target turrets, a wood M40 style stock that has a pillar bedded action and free floated barrel. The Kevlar stock is full length bedded including the barrel. Speaking of the barrel, it’s a 24” chrome/moly not stainless and it’s 0.660” at the muzzle, so it’s heavier than a standard barrel but it’s not as heavy as a varmint weight barrel. It’s for sale because I’m not going to make good use of it at my age. It’s only going to waste in the gun safe. Once again it is a left hand action. Condition and performance? Condition is Excellent and can it shoot? Absolutely. It’s not picky about ammo. Will shoot most standard velocity well, never tried high velocity and absolutely no Stingers. I believe they’ll cause problems due to the type of chamber. Besides, if you use Stingers you don’t need this type of rifle. If you have any other questions or need more photos, let me know.

categories:Sporting GoodsGuns

15820 impressions

829 views

Please read entire ad! Prices below are not negotiable!  No trades or offers! Prices and quantities are as follows for parts: Bolt, Chinese Type 56, complete w/floating firing pin, extractor, etc - $150 Bolt Carrier, Chinese type 56 - $45 (1 available) Long Recoil spring, complete - $50 (1 available) Dust cover, Chinese type 56, no markings or serial number on top - $40 (1 available) Rear sight leaf spring (spring only) - $12 (2 available) Short spring - $15 (1 available) Short piston - $28 (1 available) Take down latch, Russian - $10 Magazine, internal 10rd pinned to 5, Chinese - $50 (1 available) Spike Bayonet, complete - $65 (3 available with spike, bolt, spring & handle – new condition). Ammo bandolero pouch, Chinese - $25 Cleaning rod, Russian - $25 Cleaning rod, Chinese/NcStar - $15 Front sight base w/bayonet lug (with sight pin & block, no mounting pins included for front sight) - $60 Tapco ODG Synthetic stock with 6 position stock (not ATI) black moulded plastic hand guard (gas tube not included) - $250 Gas port reamer (carbon) cleaner, gas chamber - $15 (3 available) Oil bottle, square green plastic - $3 Oil bottle, steel (round) - $6 (2 available) Oil bottle(steel), pouch - $4 Ammo pouch, Russian - $10 (2 available) 10rd stripper clips, Czech made - $3 ea (6 available) These are the only parts I have... I have no trigger groups, gas tubes, stocks, other springs, slings, barreled actions, recoil lug bolts, spring loaded bolts, rear sights or parts, muzzle brakes or bladed bayonets available. No parting out pieces of the magazines, bayonet units or receiver bolts...you purchase the whole unit. If it’s not listed above then it’s not available.  All of you know how hard it is to find SKS parts nowadays... this is it! Items and pictures will be removed once parts have been sold...items will not be “saved/on hold/held ” unless paid for in full, no exceptions! Items are sold on a first come basis w/ payment in full.  Please don’t ask about the certain serial numbers on the mags...they are either Chinese or Russian only. Shipping available – Items combined to ship / I ship within Canada only. Ship costs starts at $22 per tracked package / If it's small enough to go letterpost then inquire about that option. Payment by EMT (shipped) or cash (F2F pickup)

categories:Sporting GoodsGuns

46596 impressions

1609 views

Henry, Single Shot Shotgun, Brass, 20 Gauge, H015B-20 Reduced from 939.99 to 899.99 Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Specifications Model Number : H015B-20 Action Type : Single Shot Shotgun Caliber : .20 Gauge Chamber Size : 3″ Shells Capacity : 1 Round Barrel Length : 26″ Barrel Type : Round Blued Steel Rate of Twist : Smooth/Full Choke Overall Length : 41.5″ Weight : 6.73 lbs. Receiver Finish : Polished Brass Rear Sight : None Front Sight : Brass Bead Scopeability : N/A Scope Mount Type : N/A Stock Material : American Walnut Buttplate/Pad : Brass Length of Pull : 14″ Safety : Rebounding Hammer Best Uses : Target/Hunting/Bird Shot Embellishments/Extras : 3″ Shells

categories:Sporting GoodsGuns

7261 impressions

615 views

Remington 870 Home Defense 12 Gauge Pump Action Shotgun R25559 Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Proven 870 Home Defense Models Fixed Cylinder choke for use with common home defense shotshell loads Accepts standard Model 870 replacement barrels without modification SKU : R25559 Model : 870 Gauge : 12 Chamber : 3″ Stock : Walnut Front sight : Bead Barrel Length : 18.5″ Barrel Type : Fixed Cylinder Choke Capacity : 4 Average weight : 7.5lbs Length of pull : 14″

categories:Sporting GoodsGuns

9573 impressions

994 views

Beretta BRX1, 300 Win Mag, Upgraded with a vertical grip & factory muzzle break. Make: Beretta Model: BRX1 Calibre 300 Win Mag Action Type: Bolt Action Straight pull Shooting Type: Hunting Handedness: Right/ Left-Handed Barrel Length: 24" Magazine Capacity: 5 Rounds Looking to trade for a 7 MM or 7 PRC of equal value & MUST BE left-handed bolt I may trade up or down depending on what you have!! $1800.00 Trade value or $1600 cash... If you have ammo we can trade that as well I have 3 or 4 box's or i can sell you the ammo at a discount rate!! https://www.youtube.com/watch?v=0-SUoekPOuc

categories:Sporting GoodsGuns

3101 impressions

97 views

Ege Arms, CG12, 12 Gauge Coach Gun, side by side, exposed hammer, double trigger, black, 20 inch barrel, CG12F-BLK Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Features & Specifications Type : Coach Gun Action : Break open, easy & smooth opening Caliber : 12 Gauge Barrels : Side by side Barrel length : 20" Chamber : 3" Capacity : 2 Exposed hammers Triggers : 2 Barrel color : Black Chokes : Cylinder, Modified, Full, case & key included Stock : Wood Butt Pad : Thick rubber Ambidextrous thumb safety Sling Studs : None Sights : Front brass bead only Overall length : 37 & 1/4" Approximate weight : 3.0 kg First trigger, LOP : 11 & 3/4" Second trigger, LOP : 12 & 3/4"

categories:Sporting GoodsGuns

8419 impressions

1080 views

Ege Arms, CG12, 12 Gauge Short Coach Gun, side by side, exposed hammer, double trigger, BLACK, CG12-BLK Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Features & Specifications Type : Coach Gun Action : Break open, easy & smooth opening Caliber : 12 Gauge Barrels : Side by side Barrel length : 11″ Chamber : 3″ Capacity : 2 Exposed hammers Triggers : 2 Barrel color : Black Chokes : Cylinder, Modified, Full, case & key included Stock : Wood Butt Pad : Thick rubber Ambidextrous thumb safety Sling Studs : None Sights : Front brass bead only Overall length : 26 & 1/4″ Approximate weight : 2.8kg First trigger, LOP : 11 & 3/4″ Second trigger, LOP : 12 & 3/4″

categories:Sporting GoodsGuns

7116 impressions

850 views

Brand new Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g. The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself. It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA. Dual-Axis Locking AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis. The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis. These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability. Low Axis Over Bore The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed. The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained. Built Rugged As the AK Itself The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics. Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking. No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release. Accessory Side Rail Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories. Compatibility The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder. Greater Optics Versatility. Superior Finish. A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base. The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.

categories:Sporting GoodsGuns

6566 impressions

640 views

Prices A - Single Sided Kit - $20 B - Double Sided Kit - $30 **$5 off each additional kit for any order combo (2 or more) **Ex. A+B=$50-($5 discount)=$45 Total **3x A=3*$20=$60-2*($5 discount)=$50 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) ___________________________________ Single Sided Specs/Instructions Specifications Black Anodized Stainless Steel Weight: 0.2oz (6g) Length: 0.571" (14.5mm) Equivalent to Magpul Type 1 Sling Mount Kit Kit comes with the following 1x Stainless QD Insert 1x Stainless Washer 1x Stainless Nut 3x Stainless Screws (1/2", 3/4", and 1") What you will need 1/8" Allen Key Wrench 5/16" Socket Screwdriver/Wrench Blue Loctite (Optional) Instructions 1. Insert QD Insert into stock on the desired side 2. Insert one of the 3 screws through the hole on the QD Insert 3. Insert a washer on the opposite side 4. Apply a drop of Loctite on the threads of the nut (optional) 5. Using the Allen Key Wrench and 5/16" Socket fasten the nut on the screw 6. Fasten the assembly until snug using the Allen Wrench ___________________________________ Double Sided Specs/Instructions Specifications - Black Anodized Stainless Steel - Weight: 0.4oz (12g) - Length: 0.571" (14.5mm) *each insert* - Equivalent to Magpul Type 1/Type 2 Sling Mount Kit Kit comes with the following - 2x Stainless QD Insert - 4x Stainless Washer - 3x Stainless Screws (1/2", 3/4", and 1") What you will need - 1/8" Allen Key Wrench - Blue Loctite (Optional) Instructions 1. Insert QD Inserts into stock on both sides of the stock 2. Insert one of the 3 screws through the hole of the unthreaded QD Insert 3. Using the Allen Key Wrench thread the screw and temporally fasten the assembly together 4. Function check using the QD Sling Mount on both sides 5. If the bottom of the screw is protruding too far out, remove the QD Inserts and shim off the QD Inserts with the provided Washers 6. Once the correct Screw and Washer Shims (Optional) is determined, the assembly can be fastened together 7. Apply a drop of Loctite on the threads of the Screw (optional) 8. Fasten the assembly until snug using the Allen Wrench 9. *If the Threaded Insert is spinning on it's own, the Insert can be retained via Retaining Hole with a smaller Allen Wrench (See Last Image)

categories:Sporting GoodsGuns

10622 impressions

1123 views

Surplus Non restricted Bolt action Caliber: 7.62x54R Capacity: 5 Made in 1956 by Factory 26 The serial number on bolt does not match The condition is 6/10 and the rifling is dark and dirty The cleaning rod missing  The folding bayonet functions fine Still shootable The trigger is smooth Made in China

categories:Sporting GoodsGuns

9164 impressions

431 views