LEE CLASSIC 41 CALIBER (.409 ) BULLET SIZING KIT

WORKED LIKE A CHARM and ONLY USED ONCE.....before someone offered me more than I could refuse for my firearm at the range !  I am willing to ship at buyer’s expense or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. Please contact me by email .

• The Lee Lube and Size Kit is one of the fastest and easiest ways to lubricate and size cast bullets. The sizing die that comes with the kit fits in any press that accepts standard 7/8"-14 threaded dies. Bullets are pushed through the sizing die nose first, so no special top punches are needed. Gas checks can be installed with this tool…. simply place the gas check on the base of the bullet before sizing. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container which is included and doubles as a storage case for the die.
  Lee recommends bullets be relubed after sizing to be sure the sized portion is coated.

Directions for Use:
Lubricating Bullets:

1. Place bullets in provided red plastic container and drop some Lee Liquid Alox onto the bullets.
2. Gently shake the bullets in an orbital motion to coat the bullets. If they do not coat completely, add a little more lube.
3. Spread the bullets onto waxed paper and let dry overnight.
 

Sizing Bullets:   1. Screw the sizing die into any standard reloading press. Exact depth is not important.
2. Install the bullet punch into the ram. This fits all rams that use standard shellholders.
3. Place the red plastic container with the lubed bullets inside on top of the sizing die.
4. Place bullet on the punch and push the bullet through the die.
5. When 3/4 of the bullets have been loaded, lift the red plastic container off the die. Invert the holder before opening.
6. For rifle and hot pistol loads, it is best to relube the bullets to ensure the sized portion is recoated.