Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

4194 impressions

485 views

Brand new The MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.  With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in USA

categories:Guns

2599 impressions

382 views

Brand new Designed for use with all M-LOK compatible Hand Guards and Forends M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 9 Slots Max overall length of 4.1″.

categories:Guns

2063 impressions

345 views

Brand new Designed for use with all M-LOK compatible hand guards and forends. The 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight. The M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included. 11 usable slots and a max overall length of 4.9". Mounts directly to M-LOK compatible systems. Multi-directional mounting Intermediate spacing option Lightweight reinforced polymer Cammed T-nuts Recoil / impact mitigation lugs Made in USA

categories:Guns

2692 impressions

367 views

Brand new Designed for use with all M-LOK compatible Hand Guards and Forends M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 3 Slots Max overall length of 1.6″.

categories:Sporting GoodsGuns

1997 impressions

399 views

Brand new The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in USA

categories:Sporting GoodsGuns

2276 impressions

395 views

Brand new The Enhanced Trigger Guard is a black anodized aluminum drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The Enhanced Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. All mounting hardware included. Made in USA

categories:Sporting GoodsGuns

2261 impressions

375 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2776 impressions

492 views

Excellent shape. Straight frame, slides well, feet in good condition. One plastic cap on top end of ladder is broken off (see picture) but ladder is fine. Used when we put together one large metal storage shed and unused since so selling. For comparison checked Canadian Tire before posting this ad and pretty much exact same ladder (Mastercraft) was $229.00. Located in Westlock

categories:Tools and Equipment

1395 impressions

346 views

REDCAMP 24 inch Bar Height Table. Waterproof stainless steel top and aluminum frame. 45" H Tall Round Cocktail Table Bistro Pub Table, 45"& 29.5" Height Adjustable. You can add or remove the sturdy aluminum shaft from the pedestal to adjust your table height. Flip Top: The table top easily flips up with a push of the button underneath the top. Easy to store without taking up too much space. It can hold up to 110-165lbs. The 4 footpads can be adjusted to keep the bar table balanced on uneven floors.

categories:Yard and Garden

1953 impressions

500 views

polishing for your truck 1400...2000

categories:Auto and Trailers

1028 impressions

250 views

12 x 8.5 pluse 2’ v nose. Comes with ramp and spare tire. Call or text 780-205-6363

categories:Auto and TrailersUtility Trailers

6095 impressions

580 views

This The WILD2 provides 1000 lumens of white light with up to 1.5 hours of runtime. Ultra-light and durable, weighing 4.7 ounces, it provides a well-defined hotspot with the perfect balance of spill. Wild2 is primarily made out of 6061-T6 aluminum and a Type III MIL-SPEC hard anodize finish. The device is impervious to dust, sand, and dirt, and is waterproof to 66 feet. Mount the Wild2 in seconds to any gun equipped with a 1913 (e.g., Sig Sauer P320) or Glock Universal (e.g., Gen 3 or Gen 4 Glock) or air soft rail. Transition between rail types by reversing the patented INFORCE crossbar in the mounting fixture. All three functions "constant, momentary, and strobe” are activated by pressing laterally on either the left or right paddle. The original price was $350 tx in. I paid $250, but I am selling it for $220 shipped to majors I'm willing to trade for a red dot of the same value (Vortex, Bushnell, Trijicon)

categories:Sporting GoodsPaintball and Airsoft

5319 impressions

560 views

2024 silverback closed in aluminum, closed in carg trailer can be used as a heavy duty cargo trailer, a heavy duty snow mobile trailer, a snow mobile trailer or a closed in car hauler bs k door is also a ramp to load car. Asking $39900 obo call Chris at 1-587-982-0222

categories:Auto and TrailersUtility Trailers

5883 impressions

637 views

Im offering a full polish on aluminum truck parts trailers boats motor homes pontoons any aluminum

categories:Auto and TrailersAuto PartsTires and Rims

2747 impressions

640 views

Caliber: .38 Special+P Bullet Weight: 158 Gr Bullet Style: FMJ Case Type: Aluminum Muzzle Energy: 253 ft lbs Muzzle Velocity: 850 fps Rounds Per Box: 50 Made by CCI

categories:Sporting GoodsGuns

1845 impressions

373 views

Brand new Designed for use with all M-LOK compatible Hand Guards and Forends M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 7 Slots Max overall length of 3.3″.

categories:Sporting GoodsGuns

1534 impressions

319 views

For the month of May you can save 25%on your fencing needs We will match any written quote from any local supplier and beat price by 5% or more. Our SPRING SALE Features WHITE VINYL FENCING - - PRIVACY 6 foot high white model - top grade or - RANCH RAIL FENCE in 3 or 4 RAIL PROFILES RESIDENTIAL OR COMMERCIAL SALES Phone or text for a free quote - no front cost - pay on delivery - book for now or summer delivery Booking simply requires you to agree to the quote we send you and place your order We also are able to finance your order- 60 days no interest with a down payment But remember to get your free quote and book your order now as inventory will go fast Our prices are below inflation prices WE WILL FENCE YOUR BACKYARD OR YOUR NEW SUBDIVISION - WE have been in the fencing business 51 years this year - Not only are our prices are by far the best in the industry but the quality of our products are unbeatable. Installation can be arranged if required - These products are sold by the running foot and our price includes posts, rails, u-channel, caps, aluminum bottom rail inserts and tongue and grove fence panels. - all components are thick walled (highest industry standard ) and UV protected for extremely long lifetime of service and carry manufacturers lifetime warranty To place order call or text 825 450 2271 Our friendly staff will respond with a written quote for your consideration and/or acceptance. All orders will be delivered from our Innisfail Depot to your home or construction site within Alberta. All payments can be paid in full at time of delivery. No deposits required. All that is required to secure your order at sale pricing is return a signed order. Call sales at - 825.450 2271 US Outdoor and Yard Products "Building Beautiful Backyards Since 1973" US Fencing and Yard Products - Canadian Division - Innisfail AB Depot

categories:Yard and Garden

1498 impressions

527 views

Brand new (never used) Pickup Toolbox. Ready to go, send dm. Make offer! Can deliver as well. Worth a 1000$. MODEL 127-0-04 SADDLE BOX, ALUMINUM, FULL STANDARD, CLEAR, 11.0 CU FT Approx. Product Length (in): 72 Approx. Product Width (in): 20 Approx. Product Height (in): 18 About the product : Description: The new Weather Guard 1KEY Ultralock is the next advancement in truck box security. The Ultralock combines one key simplicity with detent technology, providing quick visual assurance your gear is locked down and protected. The box features the new push button lock that can code multiple boxes on a truck or entire fleet to the same key. The Model 127-0-04 is a aluminum truck toolbox and has a storage capacity of 11.0 cu ft. It is coated with a Clear ARMOR TUF® Powder Coat finish ensuring years of dependability.

categories:Tools and Equipment

2083 impressions

365 views

Description For the month of May you can save 25%on your fencing needs We will match any written quote from any local supplier and beat price by 5% or more. Our SPRING SALE Features WHITE VINYL FENCING - - PRIVACY 6 foot high white model - top grade or - RANCH RAIL FENCE in 3 or 4 RAIL PROFILES RESIDENTIAL OR COMMERCIAL SALES Phone or text for a free quote - no front cost - pay on delivery - book for now or summer delivery Booking simply requires you to agree to the quote we send you and place your order We also are able to finance your order- 60 days no interest with a down payment But remember to get your free quote and book your order now as inventory will go fast Our prices are below inflation prices WE WILL FENCE YOUR BACKYARD OR YOUR NEW SUBDIVISION - WE have been in the fencing business 51 years this year - Not only are our prices are by far the best in the industry but the quality of our products are unbeatable. Installation can be arranged if required - These products are sold by the running foot and our price includes posts, rails, u-channel, caps, aluminum bottom rail inserts and tongue and grove fence panels. - all components are thick walled (highest industry standard ) and UV protected for extremely long lifetime of service and carry manufacturers lifetime warranty To place order call or text 825 450 2271 Our friendly staff will respond with a written quote for your consideration and/or acceptance. All orders will be delivered from our Innisfail Depot to your home or construction site within Alberta. All payments can be paid in full at time of delivery. No deposits required. All that is required to secure your order at sale pricing is return a signed order. Call sales at - 825.450 2271 US Outdoor and Yard Products "Building Beautiful Backyards Since 1973" US Fencing and Yard Products - Canadian Division - Innisfail AB Depot

categories:Yard and Garden

1073 impressions

452 views

19-foot Aluminum Jet Boat with 440 Dodge engine and Berkley pump. Engine and pump have 4 and 2 seasons respectively since rebuild. Dual 30-gallon fuel tanks, new upholstery, and flooring installed 2 years. New 16” tires on trailer. - $17,500

categories:Sporting GoodsBoats

7579 impressions

1267 views