Caliber: 410 GA Ounces: 0.39 oz Length: 2.5″ Bullet Style: No.8 Shot Type: Lead Rounds Per Box: 25 Made in Turkey BPS Balıkesir Explosives Industry and Trade Inc. (BPS A.S.) was established in 2014 by Mehmet Akif Yavaşca and Müşteba Yavaşca in order to produce the high quality small arms’ ammunition in Turkey. In the year 2015, Sarsilmaz Ammunition Inc. of the Sarsilmaz Group, which is an estimable small arms producer in Turkey and Europe, joined in the BPS A.S. as a partner and increased its power. In 2016, the production of shotgun cartridges started with the processing of quality raw materials by experienced personnel in modern machines with the principle of continuous development. In 2017, 9 mm blank cartridges and in 2019, 9x19 mm parabellum pistol cartridges production has started. BPS A.S. currently loads 46 types of cartridges for small arms and expands its product range every year.

categories:Sporting GoodsGuns

10027 impressions

666 views

Here is a Canadian/British origin and the C broad arrow marking), and cross-referencing the images (including the faint stamping that reads “Z.L.&T. LTD 1943” along with the C broad arrow symbol), this is an original Canadian WWII Pattern 1937 (P37) web pistol holster. Features •  Khaki/tan heavy cotton canvas construction, typical of British/Commonwealth web gear from the era to save on leather due to wartime shortages. •  Flap closure with brass snap (often called a “lift-the-dot” fastener in some variants). •  Brass or metal belt hanger and loops on the back for attachment to P37 web belts or pistol belts. •  Angled design for right-side hip carry, with a reinforced muzzle end. •  Markings: “Z.L.&T. LTD 1943” refers to the manufacturer Zephyr Looms & Textiles Ltd. (Toronto, Canada), a known WWII contractor for Canadian military gear. The “C broad arrow” (often stylized as C↑ or C with an arrow inside) is the Canadian government property/acceptance mark, indicating it was issued for Canadian forces (part of the British Commonwealth system, where the broad arrow denotes ordnance property, and the “C” specifies Canada). This holster was designed primarily for revolvers like the Webley Mk IV .455 or Enfield No. 2 .38, which were standard for Canadian troops early in WWII. However, similar P37 holsters were also used or adapted for the Canadian-made Inglis Browning Hi-Power 9mm pistol (produced from 1944 onward). Original Canadian WWII P37 canvas holsters in good used condition (like this one, with intact hardware and no major tears) typically sell for $150–$350 on sites like eBay, GunsInternational, or militaria forums/auctions. Factors influencing price include: Invasion date1943 date (pre-U.S. entry into the war, during the British Commonwealth’s initial buildup). Clear markings (the C broad arrow and manufacturer stamp add provenance). Condition: This appears solid but field-used, so more toward the $200–$300 range. Recent comparable sales include similar Z.L.&T. Ltd.-made holsters from 1943–1945 fetching $200–$300. Can ship anywhere in Canada Please see my other ads for collectable military accessories.

categories:Sporting Goods

1851 impressions

99 views

Here is a Canadian/British origin and the C broad arrow marking), and cross-referencing the images (including the faint stamping that reads “Z.L.&T. LTD 1940” along with the C broad arrow symbol), this is an original Canadian WWII Pattern 1937 (P37) web pistol holster. Features •  Khaki/tan heavy cotton canvas construction, typical of British/Commonwealth web gear from the era to save on leather due to wartime shortages. •  Flap closure with brass snap (often called a “lift-the-dot” fastener in some variants). •  Brass or metal belt hanger and loops on the back for attachment to P37 web belts or pistol belts. •  Angled design for right-side hip carry, with a reinforced muzzle end. •  Markings: “Z.L.&T. LTD 1940” refers to the manufacturer Zephyr Looms & Textiles Ltd. (Toronto, Canada), a known WWII contractor for Canadian military gear. The “C broad arrow” (often stylized as C↑ or C with an arrow inside) is the Canadian government property/acceptance mark, indicating it was issued for Canadian forces (part of the British Commonwealth system, where the broad arrow denotes ordnance property, and the “C” specifies Canada). This holster was designed primarily for revolvers like the Webley Mk IV .455 or Enfield No. 2 .38, which were standard for Canadian troops early in WWII. However, similar P37 holsters were also used or adapted for the Canadian-made Inglis Browning Hi-Power 9mm pistol (produced from 1944 onward). Original Canadian WWII P37 canvas holsters in good used condition (like this one, with intact hardware and no major tears) typically sell for $150–$350 on sites like eBay, GunsInternational, or militaria forums/auctions. Factors influencing price include: Rarity of the early 1940 date (pre-U.S. entry into the war, during the British Commonwealth’s initial buildup). Clear markings (the C broad arrow and manufacturer stamp add provenance). Condition: This appears solid but field-used, so more toward the $200–$300 range. Recent comparable sales include similar Z.L.&T. Ltd.-made holsters from 1943–1945 fetching $200–$300. Can ship anywhere in Canada Please see my other ads for collectable military accessories.

categories:Sporting GoodsGuns

9186 impressions

165 views

Please text anytime 6476871484. Brand new in original box. Multifunctional one of the kind pocket flare gun 70% steel construction. Upgraded special edition. This was a unique design made to be small, lightweight yet very sturdy. The barrel and handles are constructed of DuPont Zytel reinforced with fiberglass strands. The frame is heavy steel construction and coated to prevent corrosion. Just 6” in length. Made in the early 70’s to be far superior to the Orion models. Keep Handy For Emergencies . This special edition gun unlike regular model has many significant improvements it is compatible with all 12ga flares, bangers and adapters for different subcaliber blanks from .22 to 9mm etc. it has front sight and horrendous safety system from previous model has been removed.

categories:Sporting GoodsGuns

57825 impressions

5362 views

Tired of Regular Snap Caps breaking your wallet and crapping out on you? I make brass snap cap rounds out of brass ammo for training or gun maintenance purposes. Please note that this is just a hobby so supply is sometimes limited to availability of clean brass. Please contact me if you have clean, resized, no primers brass available for sale at a reasonable price. Currently in limited quantities Pistol Rounds 5 for $10 plus $5 shipping anywhere in Canada 9mm Luger, 40 S&W Brass, 38 Special, 44 Mag .22 in brass (packs of 15) $10 Rifle Rounds 2 for $5 for $10 plus $5 shipping anywhere in Canada 303 British, 308, 8mm Mauser, 7.62x39 (steel case), 3006 , 8mm Rem Mag, 223/556 Shotgun Shells 2 for $5 (Shipping varies due to size/quantity and destination) 12g, 20ga 16ga and 410 Brass/Plastic (please indicate length required) 2 for $5 2 for $5 7mmx57, 6.5 Creedmoor, 45-70 Govt, 6.5x52 Carcano, 7.62x54, 20 gauge, 270 win, 357mag, 3030 Win, 444 Marlin, 35 Rem Brass not listed, if you have brass or shells that cycle through your guns I will make them for $1 each (you cover the shipping) primers removed. If you leave primers in, just make sure they have been fired and are not live. Can make (If you would like rounds made that I have not listed, I can do add those to my list) Text me at 7804464125 for faster response

categories:Sporting GoodsGuns

81890 impressions

2798 views

Selling a variety of Hornady and RCBS SHELL PLATES. Can use regular letter mail for cheaper shipping. HORNADY SHELL PLATES lock-n-load AP. $60 each plus shipping. Shell plate #2 - 219 Zipper, 22 Savage, 25-35 Winchester, 30-30 Winchester, 30 Herrett, 32 Winchester Special, 32-40 Winchester, 375 Winchester, 38-55 Winchester, 7x30 Waters, 7.5x55 Swiss Shell plate #4 - 220 Swift, 225 Winchester, 6.5 JDJ, 7mm Merrill, 30mm Merrill Shell plate #13 - 9.3x74R, 7x57R, 7x65R, and others Shell plate #29 - SOLD Shell plate #35 - SOLD RCBS SHELL PLATES $60 per Shell plate Shell plate # 4 - 257 Weatherby Mag, 264 Win Mag, 6.5mm Rem Mag, 270 Weatherby Mag, 7mm Rem Mag, 7mm STW, 7mm Weatherby Mag, 30-338 Win Mag, 300 H&H Mag, 300 Weatherby Mag, 300 Win Mag, 308 Norma Mag, 8mm Remignton Mag, 338 Win Mag, 340 Weatherby Mag, 350 Rem Mag, 358 Norma Mag, 9.3x74R, 375 H&H Mag, 375 Ruger, 416 Remington Mag, 450 Marlin, 458 Win Mag, 458 Lott, 460 S&W Shell plate #6 - .22 Remington Jet, 5.6mm x 50 Rimmed, .357 Magnum, .357 Remington Maximum, .38 Smith & Wesson, .38 Special Shell plate #10 - .17 Remington, .17 Remington Fireball, 204 Ruger, .221 Remington Fireball, .222 Remington, .222 Remington Magnum ,.223 Remington (5.56mm), 6mm x 45, 7mm Thompson/Center Ugalde, .300 AAC Blackout , .380 Auto Pistol, 9mm x 18 Ultra Shell plate #16 - .30 Luger (7.65mm Luger), 30 Mauser (7.63 Mauser), .356 TSW, 9mm FAR, 9mm Luger, 9mm Makarov, 9mm x 21 9mm x 23 Winchester Shell plate #18 - 44 Magnum, .44 Special RCBS Little dandy rotor #8 $15 RCBS Little dandy rotor #23 $15 Flash hole deburring tool 6mm caliber $15 Pilot neck reamer .20 cal $10

categories:Sporting GoodsGuns

122142 impressions

4614 views

Hi All, I also have some various 9mm Reloads for sale. Approx. 1000 lead round nose 124g? .20 cents/round. ***SOLD*** Appox. 1000 FMJ 115g .25 cents/round A few hundred 'Very Hot and Fast' (as told to me by the guy I bought them from) 90g HP .20 cents/round So I would suggest these last ones listed to only fired in a carbine only, not a pistol. I'd also give you 5 rounds to try for free if your local. So Local to Lethbridge please. If you want to commit to buying a larger quantity I'd be willing to travel a bit ;) Text, email or reply here please. Thanks for viewing my Ad :)

categories:Sporting GoodsGuns

46718 impressions

1455 views

Shotgun adapters are back on hand now! Free shipping Canada wide on all orders over $250! Convert your 12ga shotgun to fire pistol ammunition! These are RIFLED adapters! We have various calibers and we have both short compact adapters and full length ones. The short ones are far lighter and great for plinking/bug out bag. The longer adapters are quite accurate and can even be used for small game hunting. We sell these in 22LR, 9mm, 40S&W, 45ACP, 357MAG, 44MAG. https://partsonly.ca/product-category/shotgunadapters/ Please head to our website to check stock status or make a purchase. You can reach out directly to info@partsonly.ca with any questions. All major credit cards accepted, e-transfer accepted.

categories:Sporting GoodsGuns

16367 impressions

706 views

Brand new This replacement part is a factory original from CZ UB. Factory replacement parts are manufactured to the exact same specifications and tolerances and use the same manufacturing materials as the original parts which guarantee excellent fit and reliable operation. All Full Size Pistols with 0.55" Bushings. CZ 75 SP01. CZ 75 SP01 Tactical. CZ 75 Shadow. CZ 75 SP01 Shadow. Barrel Diameter 0.550"  This is the bigger diameter barrel for SP01 and SP01 Shadow, it will not fit in standard CZ75. The Standard bushing is smaller (0.502").

categories:Sporting GoodsGuns

10429 impressions

511 views

PLEASE READ CAREFULLY: You must obtain a letter of exemption from the CFO of your province in order to buy a handgun in Canada as of October 21, 2022. - CZ 75 SP-01 SHADOW 'ORANGE' 9mm caliber - NEW in black polymer carry case - 4.5 inch /114.3 mm long match grade burnished barrel - `ORANGE` meaning: On this pistol; all parts are HAND-FITTED to extemely tight tolerances by a master-gunsmith at the CZ Custom factory at the time of production for outstanding accuracy compared to the standard CZ 75 SP-01 - 3x 10 round steel magazines - THIS PISTOL IS IN IT`S ORIGINAL FORMAT and has not been altered in any way! - Full steel frame and slide... - Spare parts; recoil springs and shock-buffers in pictures (are all included) from the factory - Oil bottle (with oil), cleaning brush and patch puller (included) - Instruction manual (paper) and instructional DVD (included) - Extended Ambidextrous Safety - Extended magazine release - Extended beavertail - Checkered front and back straps and trigger guard - Super smooth polished trigger in single and double action - Skeletonized hammer - Accessory rail under the barrel shroud - Novak-style fixed rear sights and red fiber optic front sights - Integrally flared magwell - Front and rear slide serrations - Stainless steel guide rod and spring with shock buffer - 'Orange' aluminum, agressively-checkered CZ grip panels - Weight 40.7 oz / 1153 g unloaded Note* Serial number has been blacked out in all photos

categories:Guns

32172 impressions

3456 views

- IMPORTANT- PLEASE READ CAREFULLY: YOU MUST have '12-(6)' CLASSIFICATION on the back of your PAL as well as a letter of exemption from the CFO of your province in order to buy this PROHIBITED HANDGUN in Canada as of October 21, 2022!!! - GLOCK 19 /Gen 2 /9mm Striker-Fire pistol (PROHIB PISTOL) - LIKE NEW in black 'GLOCK' original polymer case - 4.02 inch /102 mm barrel /'verified'-short barrel-PROHIB PISTOL (grandfathering clause) - Only 200 rounds through the barrel! - Fully adjustable rear sight - 4X (10 rnd) 9mm double-stack 'GLOCK 19' Magazines (included) - 9mm speed loader (included) - Bore brush and Patch puller (included) - Extra 'Glock' fixed, rear sight (included) - Instruction Manual (included) - Weight 21oz /595 g unloaded - This pistol is in it's ORIGINAL FORMAT Note: Serial number has been blacked out in all photos

categories:Guns

71357 impressions

7915 views

Experience the precision and effectiveness of Hoppe's Pull thru Bore Snakes, available in 21 different models to fit a multitude of calibers. These bore snakes are an essential accessory for firearm enthusiasts, designed to ensure your rifle or handgun is always ready for the next shot. With an integrated brass brush, these snakes effectively remove debris and buildup from your barrel, maintaining optimum performance. Each model is meticulously crafted to navigate the unique contours of your barrel, providing a thorough cleaning solution. Whether you're a seasoned shooter or a hunting firearm accessory enthusiast, Hoppe's is synonymous with quality and reliability. These Pull thru Bore Snakes are no exception, offering simplicity and efficiency for the upkeep of your firearms. I Will ship Anywhere in Canada. (4) bore snakes shipped for $5.00 using oversize letter by Canada Post. This does not include the 16 20 12- and 10-gauge shotgun as they are simply too thick and heavy and must go parcel. -For larger orders the most cost-effective Method of shipping is by parcel using Canada post Pre paid boxes. The Extra small size is a flate rate of $20 anywhere in Canada with tracking and $100 insurance and can hold quite a few items. 9 ½ inches x 6 ½ inches x 3 ½ inches. Have a look at my other ads as I certainly will combine orders. Feel free to PM me with any of your questions. Thanks Mike PISTOL MODELS .38 .357 .380 & 9mm as well as .44/.45 and .40/41 all are Suitable for Carbines. NEW .30 cal carbine Model. Total length of 55 inches with 25 inches of cleaning rope $10 .17/.17HMR/.17WSM .22/.223/5.56/.22-250/.222 6mm/.243 .270-.284/7mm/.280 .25/6.5mm/.264/6.5PRC 30/7.62mm/30-30/.308/30-06/300wsm/.300win/.303 .30 Carbine .32/8mm/.325 .35/.350/.357/.358/.375/9.3 .338-.340 .416/.44/45-70/.458/.460 .50-54 .410 gauge 28 gauge 16 gauge 20 gauge 12 gauge 10 gauge

categories:Sporting Goods

334128 impressions

12514 views

CanuckMagNorth 15rd pistol magazine spring - V2 • Compatible Magazines - 9MM / .40 S&W / .380 ACP / .357 Sig / 10mm / .45 ACP • Stainless steel anti corrosion heat treated springs • Made to the same dimensions and tolerances as a standard factory oem Glock 30/33rd magazine spring, ensuring best value and performance • 30/33 round length spring can also be used in magazines that require a spring longer than 30/33 rounds (Like the Kriss Vector 40rd magazines) by using a magazine spring spacer to make up for the empty space. Available for purchase at canuckmagnorth.ca If you have any questions, requests, or inquires, contact anytime via email. Email canuckmagnorth@gmail.com • • • Tags: Ruger pc9, Tnw aero jr, AR-9, Fx9, Spc9, Ghm9, Sub2k, Glocks, PSA Dagger, P80, G17, G19/19X, G26, G34, G45, G47, Glock Magazines, Glock Accessories, Firearm Magazines, Glock Firearms, Gun Enthusiast, Tactical Gear, Shooting Sports, Self Defense, Gun Culture, Pistol Magazines, Glock 19, Glock 17, Magazine Capacity, Range Day, Gun Safety, 2A Community, Firearm Training, Glock Life, Glock Family, Custom Magazines, Kriss Vector, Canik TP9, Palmetto State Armory Dagger, Glock Fanatics, Glock Tactics, Glock Mods, Glock Safety, Glock Nation, Glock Love, Glock Hobby, Glock Owners, Glock Customization, Glock Performance, Glock Addict, Glock Culture, Glock Fans, Glock Aficionado, Glock Shooter, Glock Pistol, Glock Magazine, Glock Sights, Glock Trigger, Glock Gear, Glock Competition, Glock Collectible, Glock Marketplace, Glock Range Day, Glock Features, Glock Reviews, Glock Tech

categories:Sporting GoodsGuns

31372 impressions

856 views

CanuckMagNorth 15rd pistol magazine spring - V2 • Compatible Magazines - 9MM / .40 S&W / .380 ACP / .357 Sig / 10mm / .45 ACP • Stainless steel anti corrosion heat treated springs • Made to the same dimensions and tolerances as a standard factory oem Glock 15rd magazine spring, ensuring best value and performance • 15 round length spring can also be used in magazines that require a spring longer than 15 rounds by using a magazine spring spacer to make up for the empty space. Available for purchase at canuckmagnorth.ca If you have any questions, requests, or inquires, contact anytime via email. Email canuckmagnorth@gmail.com • • • Tags: Ruger pc9, Tnw aero jr, AR-9, Fx9, Spc9, Ghm9, Sub2k, Glocks, PSA Dagger, P80, G17, G19/19X, G26, G34, G45, G47, Glock Magazines, Glock Accessories, Firearm Magazines, Glock Firearms, Gun Enthusiast, Tactical Gear, Shooting Sports, Self Defense, Gun Culture, Pistol Magazines, Glock 19, Glock 17, Magazine Capacity, Range Day, Gun Safety, 2A Community, Firearm Training, Glock Life, Glock Family, Custom Magazines, Kriss Vector, Canik TP9, Palmetto State Armory Dagger, Glock Fanatics, Glock Tactics, Glock Mods, Glock Safety, Glock Nation, Glock Love, Glock Hobby, Glock Owners, Glock Customization, Glock Performance, Glock Addict, Glock Culture, Glock Fans, Glock Aficionado, Glock Shooter, Glock Pistol, Glock Magazine, Glock Sights, Glock Trigger, Glock Gear, Glock Competition, Glock Collectible, Glock Marketplace, Glock Range Day, Glock Features, Glock Reviews, Glock Tech

categories:Sporting GoodsGuns

30519 impressions

831 views

CanuckMagNorth Glock compatible magazines V1 Specs. & Features • 9MM / .40 S&W / .380 ACP / .357 Sig - Compatible Calibers • Compatible with any firearm(s) that accept glock magazines stock or via adapter • 10rd, 15rd, 17rd, 25rd, and 30rd capacity - (Pinned to 10) • Stainless steel anti corrosion heat treated springs • 1000+rd torture test passed. 10 Ft drop test passed (loaded & unloaded) • Double stack single feed mag with self-leveling follower for reliability • Micro-texture magazine body makes reloads and handling faster • Witness holes on rear allow for quick round count check Available for purchase at canuckmagnorth.ca and currently on sale and 33% off If you have any questions, requests, or inquires, contact anytime via email. Email canuckmagnorth@gmail.com • • • Tags: Ruger pc9, Tnw aero jr, AR-9, Fx9, Spc9, Ghm9, Sub2k, Glocks, PSA Dagger, P80, G17, G19/19X, G26, G34, G45, G47, Glock Magazines, Glock Accessories, Firearm Magazines, Glock Firearms, Gun Enthusiast, Tactical Gear, Shooting Sports, Self Defense, Gun Culture, Pistol Magazines, Glock 19, Glock 17, Magazine Capacity, Range Day, Gun Safety, 2A Community, Firearm Training, Glock Life, Glock Family, Custom Magazines, Kriss Vector, Canik TP9, Palmetto State Armory Dagger, Glock Fanatics, Glock Tactics, Glock Mods, Glock Safety, Glock Nation, Glock Love, Glock Hobby, Glock Owners, Glock Customization, Glock Performance, Glock Addict, Glock Culture, Glock Fans, Glock Aficionado, Glock Shooter, Glock Pistol, Glock Magazine, Glock Sights, Glock Trigger, Glock Gear, Glock Competition, Glock Collectible, Glock Marketplace, Glock Range Day, Glock Features, Glock Reviews, Glock Tech

categories:Sporting GoodsGuns

34363 impressions

1400 views

CanuckMagNorth Kriss Vector Glock compatible magazines V1 Specs. & Features • 9MM / .40 S&W / .380 ACP / .357 Sig - Compatible Calibers • Compatible with any firearm(s) that accept glock magazines stock or via adapter • 40rd capacity - (Pinned to 10) • Stainless steel anti corrosion heat treated springs • 1000+rd torture test passed. 10 Ft drop test passed (loaded & unloaded) • Double stack single feed mag with self-leveling follower for reliability • Micro-texture magazine body makes reloads and handling faster • Witness holes on rear allow for quick round count check • Updated follower, dimensions and tolerances based on our V2 Glock Magazines • Magazines drop free loaded or unloaded Available for purchase at canuckmagnorth.ca If you have any questions, requests, or inquires, contact anytime via email. Email canuckmagnorth@gmail.com • • • Tags: Ruger pc9, Tnw aero jr, AR-9, Fx9, Spc9, Ghm9, Sub2k, Glocks, PSA Dagger, P80, G17, G19/19X, G26, G34, G45, G47, Glock Magazines, Glock Accessories, Firearm Magazines, Glock Firearms, Gun Enthusiast, Tactical Gear, Shooting Sports, Self Defense, Gun Culture, Pistol Magazines, Glock 19, Glock 17, Magazine Capacity, Range Day, Gun Safety, 2A Community, Firearm Training, Glock Life, Glock Family, Custom Magazines, Kriss Vector, Canik TP9, Palmetto State Armory Dagger, Glock Fanatics, Glock Tactics, Glock Mods, Glock Safety, Glock Nation, Glock Love, Glock Hobby, Glock Owners, Glock Customization, Glock Performance, Glock Addict, Glock Culture, Glock Fans, Glock Aficionado, Glock Shooter, Glock Pistol, Glock Magazine, Glock Sights, Glock Trigger, Glock Gear, Glock Competition, Glock Collectible, Glock Marketplace, Glock Range Day, Glock Features, Glock Reviews, Glock Tech

categories:Sporting GoodsGuns

31525 impressions

1262 views

CanuckMagNorth Glock compatible magazines V2 Specs. & Features • 20% stronger than V1, improved reliability & feeding • Updated follower, dimensions and tolerances, mags drop free loaded or unloaded • 9MM / .40 S&W / .380 ACP / .357 Sig - Compatible Calibers • Compatible with any firearm(s) that accept glock magazines stock or via adapter • 15rd, 17rd, 25rd, and 30rd capacity - (Pinned to 10) • Stainless steel anti corrosion heat treated springs • 1000+rd torture test passed. 10 Ft drop test passed (loaded & unloaded) • Double stack single feed mag with self-leveling follower for reliability • Micro-texture magazine body makes reloads and handling faster • Witness holes on rear allow for quick round count check Available for purchase at canuckmagnorth.ca If you have any questions, requests, or inquires, contact anytime via email. Email canuckmagnorth@gmail.com • • • Tags: Ruger pc9, Tnw aero jr, AR-9, Fx9, Spc9, Ghm9, Sub2k, Glocks, PSA Dagger, P80, G17, G19/19X, G26, G34, G45, G47, Glock Magazines, Glock Accessories, Firearm Magazines, Glock Firearms, Gun Enthusiast, Tactical Gear, Shooting Sports, Self Defense, Gun Culture, Pistol Magazines, Glock 19, Glock 17, Magazine Capacity, Range Day, Gun Safety, 2A Community, Firearm Training, Glock Life, Glock Family, Custom Magazines, Kriss Vector, Canik TP9, Palmetto State Armory Dagger, Glock Fanatics, Glock Tactics, Glock Mods, Glock Safety, Glock Nation, Glock Love, Glock Hobby, Glock Owners, Glock Customization, Glock Performance, Glock Addict, Glock Culture, Glock Fans, Glock Aficionado, Glock Shooter, Glock Pistol, Glock Magazine, Glock Sights, Glock Trigger, Glock Gear, Glock Competition, Glock Collectible, Glock Marketplace, Glock Range Day, Glock Features, Glock Reviews, Glock Tech

categories:Sporting GoodsGuns

31754 impressions

1007 views

Brand new Manufactured by: Laugo Arms Caliber: 9 mm Capacity: 10 rounds Including alloy baseplate

categories:Guns

3232 impressions

413 views

For sale are KCI glock magazines They have been pinned by rivet (not crimped) to reduce thier capacity from 33 rounds to a canadian legal 10. They work well in the PC9, K9, Henry Homesteader, Raven9, TNW areo and the JR carbine in addition to glock 17/19 pistols. Multiple units available One magazine is $60 Five magazines are $250 10 magazines are $450 Shipping available at actual cost or pick up in SE Edmonton. A PAL is required to buy these items.

categories:Sporting GoodsGuns

32046 impressions

837 views

$10 Each *Glock factory OEM Magazine Speed Loaders (not for .45 ACP) *Simple to use. *Compatible Glock Magazine Calibers: 9mm / .40 / .357 / .380 Auto & .45 GAP *Made from durable polymer *Maximize your time and at the range, spend less time loading and more time shooting.

categories:Sporting GoodsGuns

27039 impressions

656 views

Brand new Manufacturer: Pro Mag Fits:  CZ 75/CZ SP-01 Shadow/CZ SP-01 Shadow 2/Baby Eagle Caliber: 9 mm Capacity: 10 Rounds Material: Steel and Polymer Made in USA

categories:Sporting GoodsGuns

15218 impressions

1371 views