Very good condition Marlin 1895 45-70 lever action rifle. 22 inch barrel. Blued steel with walnut stocks. Late model Remington made with zero issues and excellent fit and finish. Comes with New Vortex Diamondback 2-7. Weaver scope rail plus a picatinny rail. Burris steel Zee rings. Rcbs dies with lockrings, Lee loader classic kit for portable reloading, trim tools, hammer spur, approx 250 of each 300 and 405 grain hardcast bullets. 1 box of full pressure Remington 405gr Corelokt ammo, 99 low pressure handloads in Starline brass. 100 more new Starline brass. Bullseye and Titegroup powder for the low pressure loads, data will be given to buyer. 2 shell holders. Mtm ammo boxes. Can ship rifle on your dime. Cannot ship reloading stuff. Not looking to part out but will sell reloading package separately after the rifle has sold. 2700 for all. Or 2000 for rifle with scope. 700 for reloading stuff. Please see pics for what's included.

categories:Sporting GoodsGuns

556 impressions

56 views

Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Ammo is available but sold separately. This one can soot 3 factory loaded modern types of ammo including original 8mm, 7.5mm Nagant and 32S&W Tested with smokeless powder. Comes with FRT paperwork. French Model 1892 Service Revolver in 8mm lebel caliber, 4.5" barrel, 6 shot. Very well built and robust . Fiocchi manufacturers modern 8mm ammo as well. The action functions excellent in single and double action. Timing and lockup are very good. Lanyard ring is undamaged. The gun is in excellent condition, with 99% of the arsenal blue intact. There is no surface pitting. The markings are sharp and complete. The action is tight and accurate, and the cylinder indexes and locks properly with no play. The bore of the 4 1/2 inch barrel is excellent and bright. The rifling is sharp and uninterrupted. The walnut grips are very good and undamaged, showing no wear. SN G10123, dated 1897. The Model 1892 revolver (also known as the "Lebel revolver" and the "St. Etienne 8mm") is a French service revolver produced by Manufacture d'armes de Saint-Étienne as a replacement for the MAS 1873 revolver. It was the standard issue sidearm for officers in the French military during the First World War. The Modèle 1892 revolver is a solid frame revolver with the cylinder on a separate frame swinging right for manual reloading. The Modèle 1892 was first fielded in 1893 and was prominent among French military officers during First World War, and later the French police until the mid-1960s.

categories:Sporting GoodsGuns

3793 impressions

196 views

• Large and small primer tubes • Powder container dump • Shell holder & dies(not included) Demonstration only. Fully functional! Reloaded 38/357, 41mag, 44mag, 45 ACP, 30-06 Any DILLON RELOADER is 2 - 3X more expensive in US dollars! Payment by cash at pickup. No other means accepted! Please, no telemarketing!!

categories:Sporting GoodsGuns

5408 impressions

440 views

I am selling some 1 lb cans of powder each can is $95 4 cans 1 lb each varget 1 cans 1 lb each imr 4350 5 cans 1 lb each H 4831 1 jug 8 pounds Imr 4350 for $700 1 jug opened 71/4 pounds varget $600 At this price they will not last long fcfs Thanks text 587-337-7340 Buy 3 cans or more for $90 a can !!

categories:Sporting GoodsGuns

5269 impressions

637 views

If this ad is still up then item is available For Sale -  Lee Precision 45-70 Govt full length steel reloading 3-die set - complete set (no crimp die included) $85 firm 1 set available Brand new in box - new manufacture -full length sizing die -bullet seating die -expanding die -powder scoop -shell holder -data, load chart, and instructions -handy red box & lubricant If you want a crimp die also, contact me as one is available for sale... EMT (shipped) or cash(F2F pickup) - Remote pick up available by appointment only, house drop box or shipped at buyers expense. Small package/tracked, all provinces - $22 (small box) via Canada Post Text or email only / unable to answer calls in remote areas No trades or offers

categories:Sporting GoodsGuns

4701 impressions

152 views

For Sale - Lee Precision BNIB .303 British Lee Classic Loader Full Length Sizing Die set $80 1 set available Brand new in box - only opened to take pictures, Contains: -full length body sizing die -de-capping chamber & decapper -bullet seater -powder scoop -priming rod -data, load chart, and instructions -handy red box EMT or cash - pick up available by appointment only, house drop box or shipped at buyers expense via Canada Post within Canada only. Small package/tracked, all provinces - $22 No trades or offers If this ad is up then item is still available.

categories:Sporting GoodsGuns

23317 impressions

1115 views

Please text anytime 6476871484. New. No PAL required for unassembled cartridges. 32RF long and short reloadable rim fire cartridges ammo new production $10 each. Those are new production reloadable cartridges especially made for antique firearms. Each set comes with Bullet, Brass/Case and .27cal blank cartridge as primer. $10 unassembled. Those are improved version of modern 32rf ammo and they do not require to be loaded in a special way to work properly. Brass is twice as thick compared to regular to provide additional durability and safety for pocket revolvers with thinner cylinder walls. They come with polymer coated bullets weighting 100grn, 95grn, or 75grn of your choice and do not require to be lubed. Power of .27 blanks is enough to shoot bullets with speed up to 500-600fps without any additional powder needed.

categories:Sporting GoodsGuns

16213 impressions

705 views

Please text anytime 6476871484. Brand new. 32 RF Short Reloadable Cartridges Ammo 75GR or 100GR bullets $10 each. New production with polymer coated bullets and smokeless powder load. Those have .27cal primers and not .22cal which require to be offset and to be loaded in special way to be fired properly. those can be loaded as normal cartridges. Can be used in all antique firearms chambered for 32rf long and short.

categories:Sporting GoodsGuns

30874 impressions

2995 views

Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Tested with smokeless powder. Colt M1892 "New Army" Revolver has significant improvements over M1889 with better locking and indexing mechanism. This one is in excellent condition. The nitre blue on the trigger and hammer is well visible. The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 4 1/2 inch barrel is fine with good rifling. The markings are sharp and defined throughout. Extractor working as it should. The assembly numbers on the cylinder, crane and frame. The original grips are good and undamaged.​​ History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand.The 1889 model would remain in production for 18 years, with significant improvements in 1892, 94, 95, 96, 1901 and 1903. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:Sporting GoodsGuns

18851 impressions

2064 views

Please text anytime 6476871484. Fully functional double action revolver in perfect restored like new condition. No PAL required. Ammo is available but sold separately. This one can soot 3 factory loaded modern types of ammo including original 8mm, 7.5mm Nagant and 32S&W Tested with smokeless powder. Comes with FRT paperwork. French Model 1892 Service Revolver in 8mm lebel caliber, 4.5" barrel, 6 shot. Very well built and robust . Fiocchi manufacturers modern 8mm ammo as well. The action functions excellent in single and double action. Timing and lockup are good. Bore and cylinder walls are very good . Exterior is professionally nickeled . Grips are replaced with new weather resistant ones , lanyard ring is undamaged. Made in 1897. S/N 2167 The Model 1892 revolver (also known as the "Lebel revolver" and the "St. Etienne 8mm") is a French service revolver produced by Manufacture d'armes de Saint-Étienne as a replacement for the MAS 1873 revolver. It was the standard issue sidearm for officers in the French military during the First World War. The Modèle 1892 revolver is a solid frame revolver with the cylinder on a separate frame swinging right for manual reloading. The Modèle 1892 was first fielded in 1893 and was prominent among French military officers during First World War, and later the French police until the mid-1960s.

categories:Sporting GoodsGuns

18734 impressions

1142 views

For Sale - Lee Precision 45 ACP Auto Full Length Carbide Sizing 3 Die - no crimp die included $85 - firm! No trades or offers Brand new in box - Contains: -full length sizing die -expanding die -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box The resizing die is carbide and is self lubricating, there is no need for resizing lube when resizing your casings with this die set. Payment by EMT(shipped) or cash(pick up) - Remote pick up available by appointment only, house drop box or shipped at buyers expense via Canada Post within Canada only. Small package/tracked, all provinces - $22 Text, email, or leave message / unable to answer calls in remote areas. If this ad is up then item is still available.

categories:Sporting GoodsGuns

12598 impressions

813 views

For Sale - one Lee Precision 303 Savage full length steel sizing dies - complete set (crimp die included) $80 - firm! 1 set available No trades or offers Brand new in box - new manufacture -full length sizing die -bullet seating die -crimp die -powder scoop -shell holder -data, load chart, and instructions -handy red box Payment by EMT(shipped) or cash(pick up) - Remote pick up available by appointment only, house drop box or shipped at buyers expense within Canada only. Small package/tracked, all provinces - $22 Text, email or leave message / unable to answer calls in remote areas. If this ad is up then item is still available

categories:Sporting GoodsGuns

10696 impressions

1022 views

For Sale - one Lee Precision 38-55 Win. full length steel reloading dies, BNIB - complete set (no crimp die included) $85 - firm! No trades or offers Brand new in box - new manufacture -full length sizing die -bullet seating die -expanding die -powder scoop -shell holder -data, load chart, and instructions -handy red box & lubricant If you want a crimp die also, contact me as one is available for sale...a must have for blackpowder reloaders and for rifles with tube magazines. EMT (shipped) or cash(pickup) - pick up available by appointment only, house drop box or shipped at buyers expense within Canada only Small package/tracked, all provinces - $22 (small box) Text or email only / unable to answer calls in remote areas

categories:Sporting GoodsGuns

21207 impressions

928 views

For Sale - one Lee Precision 300 Savage full length steel sizing dies - complete set (crimp die included) $85 - firm! No trades or offers 1 set available Brand new in box - new manufacture -full length sizing die -bullet seating die -crimp die -powder scoop -shell holder -data, load chart, and instructions -handy red box EMT or cash - Remote pick up available by appointment only, house drop box or shipped at buyers expense within Canada only Small package/tracked, all provinces - $22 Text, email or leave message / unable to answer calls in remote areas. If this ad is up then item is still available

categories:Sporting GoodsGuns

17156 impressions

803 views

For Sale - Lee Precision 7.62 Tokarev steel full length sizing 3 die set $85 - firm! 1 set available Brand new in box - Contains: -full length sizing die -expanding die -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box & Lee lubricant The resizing die is steel and is not self lubricating. Crimp die is extra & can be purchased separately but usually not req. / 7.62 Tok brass and projectiles are also available for extra, just inquire. Payment by EMT or cash - Pick up available by appointment only (cash), house drop box or shipped at buyers expense (emt) within Canada only by Canada Post. Small package/tracked, all provinces - $22 or $25-$28 if combined with other components. Text, email, or leave message / unable to answer calls in remote areas. No trades or offers If this ad is up then item is still available.

categories:Sporting GoodsGuns

16185 impressions

649 views

Hey there, ​ RCBS (Green Box) .380 Auto 3-die set with powder scoop.  $40 Shipping extra, no trades thx. Thanks for looking!

categories:Sporting GoodsGuns

2529 impressions

146 views

Trying to free up cash.  For Sale. Retumbo. 4x 1lb $105 per Also have 1 8lb jug. $810 Located in Edmonton  All are sealed

categories:Sporting GoodsGuns

2010 impressions

195 views

For Sale - one Lee Precision 32-40 Win full length steel reloading dies - complete set (no crimp die included). No trades or offers $80 - firm 1 set available Brand new in box - new manufacture -full length sizing die -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box & sample of lubricant EMT(shipped) or cash(pickup) - Remote pick up available by appointment only, house drop box or shipped at buyers expense within Canada only. Small package/tracked, all provinces - $22 Text or email only / unable to answer calls in remote areas If this ad is up then item is still available.

categories:Sporting GoodsGuns

16011 impressions

567 views

For Sale - Lee Precision 30 Mauser (aka 7.63x25) steel full length sizing 3 die set $80 - firm 1 set available Brand new in box - Contains: -full length sizing die -expanding die -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box & Lee lubricant The resizing die is steel and is not self lubricating. Crimp die is extra & can be ordered/purchased separately but usually not req. Payment by EMT or cash - Pick up available by appointment only (cash), house drop box or shipped at buyers expense (emt) within Canada only by Canada Post. Small package/tracked, all provinces - $22 (small box) Text, email, or leave message / unable to answer calls in remote areas. No trades or offers If this ad is up then item is still available.

categories:Sporting GoodsGuns

17905 impressions

691 views

For Sale - Lee Precision 9mm Luger Full Length Carbide Sizing 3 Die - no crimp die included $90 - firm 1 set available Brand new in box - Contains: -full length sizing die -expanding die -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box & Lee lubricant The resizing die is carbide and is self lubricating, there is no need for resizing lube when resizing your casings with this die set. EMT or cash - Remote pick up available by appointment only, house drop box or shipped at buyers expense. Small package/tracked, all provinces - $22 via Canada Post Text, email, or leave message / unable to answer calls in remote areas. No trades or offers If this ad is up then item is still available

categories:Sporting GoodsGuns

15024 impressions

558 views

For Sale $38,000 obo Willing to Part Out Brass Casing Processing and Ammunition Reloading Business I have for sale my brass casing processing and ammunition reloading business venture. Due to sudden health changes, I can no longer do this and have to sell quickly. Make me an offer. I have acquired all the equipment and raw materials to get the business up and running. There is enough brass casings to provide a return of approximately 25% to 40% of capital investment, at new prices. I have purchased all this equipment new, most of it imported from the USA, from Dillion Precision and Mark 7 to name a few, paying for all shipping and import duties. Due to these sudden health changes, I am no longer able to proceed with my home based business, and I have to sell it all immediately. My plan was to do this as a hobby, and take the processed brass to gun shows, farmers markets and other local and provincial events that I could attend. Processed brass does not require a PAL to possess and/or sell/purchase. Process brass that is unloaded does require a PAL to possess and/or sell/purchase. I am an avid hunter, sport shooter, and into long range accuracy as well. I was also going to reload my own ammunition with the same equipment, so I purchased the best possible for the most accurate and reliable brass and ammunition possible. I am not selling any gun powder, primers, bullets or completed ammunition. I would like to sell this as a package to an interested party. Breaking it up may make it less enticing to an interested party, but I may sell equipment individually if there is no interest in the whole package. Most of the equipment is unused, so it is in new condition. The rest of the equipment has limited use, to verify setup parameters and test end product for SAMMI specs and accuracy, so it is in near new condition. The brass is government issued, once fired, purchased through GCSurplus auction site. If you are skilled at brass processing and ammunition reloading, and are looking to expand your hobby into a small home based business that can turn a profit quickly, with reliable top quality equipment, this is what you are looking for. I have taken most of the guess work out of sourcing the proper equipment, providing all the operating and maintenance manuals to go along with equipment, with some resource books to help perfect your product. If you are part of a gun club that likes to process brass and reload their own ammunition, this is ideal for you. Please call me to view equipment, and I can answer any questions you may have. Please be aware, this is all high end processing and reloading equipment and it is not cheap to buy new. Yes, I am looking to sell, and yes I am will to negotiate, but be aware my price is still high, but not near the price you would pay to buy new today. I am asking $38,000 or best offer. Delivery and loading assistance can be arranged. Mike Logan 587-984-5851 mikelogan33833@yahoo.ca Edmonton, Alberta area

categories:Sporting GoodsGuns

5281 impressions

861 views