Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

25603 impressions

891 views

Wow, here is an opportunity to own something truly unique. Overall condition, very good.  Make: MFG FRANCAIS D'ARMES & CYCLES DE ST ETIENNE Model: Joesph Dumonthier Cane Gun Caliber: 9MM FLOBERT RF (have ammunition 50 birdshot, 50 bullets.)  Bore: Very Good, Shiny Comes With: Brass and Lead Muzzle Cover, Steel Butt Stock Action: Single Shot Rimfire Cane Gun  No sights, brown tapered steel barrel, engraved blued receiver, smooth curved horn grip, removable brass plug which allows threaded blued steel shoulder stock to be attached. Metal finish shows some scratches, handling marks and wear. Grip shows some marks, scratches and wear.  Barrel Length: 31"  Serial: 18921 Canadian Antique, No PAL Required Can ship anywhere in Canada, Please see my other ads for rare and collectible, firearms and accessories.

categories:Sporting GoodsGuns

10080 impressions

385 views

Please text anytime 6476871484. New. No PAL required for unassembled cartridges. 32RF long and short reloadable rim fire cartridges ammo new production $10 each. Those are new production reloadable cartridges especially made for antique firearms. Each set comes with Bullet, Brass/Case and .27cal blank cartridge as primer. $10 unassembled. Those are improved version of modern 32rf ammo and they do not require to be loaded in a special way to work properly. Brass is twice as thick compared to regular to provide additional durability and safety for pocket revolvers with thinner cylinder walls. They come with polymer coated bullets weighting 100grn, 95grn, or 75grn of your choice and do not require to be lubed. Power of .27 blanks is enough to shoot bullets with speed up to 500-600fps without any additional powder needed.

categories:Sporting GoodsGuns

17209 impressions

750 views

44-40 Starline new brass, bag of 100, 125$ each, 4 bags max in a extra small box, 6 bags max in a small box. Shipping cost 21$ to 23$ anywhere in Canada. <<<< 5 bags left >>>> 44 Russian Starline brass new, bag of 100, 100$ each. Shipping fee 22$ with flat rate box, up to 4 bags in a box. Excellent bullet for 44-40 or 44 russian, sizing .428, weight 200gr RNFP. 25$/100 per bag. Flate rate shipping to Canada 22$. Can put max 350 bullets in the same box for same shipping price.

categories:Sporting GoodsGuns

30932 impressions

1566 views

  I am downsizing my antique gun and militaria collection to move into a much smaller house with a much smaller gunroom.......offering an original 1880's Mills pattern , woven ammo belt with a rare 1881 Patent Mills/Orndorff brass buckle and retainer. The loops hold .40 to .45 caliber rounds and included are twenty .44-90 Sharps bottleneck cartridges. Please view the photos closely as the belt has been well used and has some damaged loops and earlier field repairs.....I have always refrained from doing any repairs or "enhancements" to my original antiques as the wear and tear is a natural part of its history and character. The cartridges are not original but are repro brass which was purchased about 45 years ago and which I loaded with black powder and some very old primers which were purchased about 50 years ago ( used for display purposes only ). The belt and attached buckle were purchased by me in 1967 at an Ohio gun show. The brass buckle has that beautiful patina which only time can create and it does have a few dents from honest wear and tear.....contact me if you interested and need more photos, or different angles, as the website only allows 10 photos. This is a rarely encountered ensemble.    I am willing to ship at "BUYER'S EXPENSE" but it will need to be by a trackable and insured method, or I offer local pick up --- OF COURSE I CANNOT SHIP THE BLACK POWDER CARTRIDGES WITHOUT REMOVING THE POWDER AS THEY ARE CLASSED AS EXPLOSIVES.......THIS COULD BE POSSIBLE AS I HAVE NEVER CRIMPED MY SHARPS CARTRIDGE RELOADS WITH PAPER PATCHED BULLETS. I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.            

categories:Sporting GoodsGuns

3735 impressions

154 views

For Sale - one Lee Precision 25-20 Win full length steel sizing 3 die set w/crimp die $80 - firm! 1 set available Brand new in box - new manufacture -full length sizing die -bullet seating die -crimp die -expanding die -powder scoop -shell holder -data, load chart, and instructions -handy red box Also have flat nose lead projectiles for sale for this caliber if your interested, no brass available thou. EMT or cash - Remote pick up available by appointment only, house drop box or shipped at buyers expense within Canada only Small package/tracked, all provinces - $22 Text, email, or leave message / unable to answer calls in remote areas No trades or offers All sales are final.

categories:Sporting GoodsGuns

21491 impressions

1139 views

I don't have anything in 243win anymore so this is surplus to my needs. As to what this does; check out what RCBS says on their website: The Precision Mic is an invaluable tool for handloaders who want to achieve safe, accurate loads that will extend the life of rifle brass. With just a few twists, the Precision Mic allows reloaders to determine chamber headspace and bullet seating depth to an accuracy of 0.001 inch. Its precise readings and ability to extend the life of rifle brass make it an excellent investment for anyone who takes reloading seriously. The Precision Mic measures from the datum point on the case shoulder to the base, giving reloaders precise readings that are in line with SAAMI tolerances. This level of accuracy is crucial for achieving consistent and safe loads, as it ensures that brass is not only properly sized, but also correctly seated. In addition to helping reloaders ensure that their loads are safe and accurate, the Precision Mic can also help extend the life of rifle brass. By accurately measuring headspace and bullet seating depth, reloaders can adjust their reloading process to ensure that brass is not overworked and that it lasts for as many reloading cycles as possible. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:Sporting GoodsGuns

4573 impressions

223 views

Frankford Arsenal bullet press $300 and stainless steel pin brass cleaner $250 Brand new. Used once

categories:Sporting GoodsGuns

16536 impressions

401 views

Hello, I just traded for a 300prc so trying to move my  300wsm Sako 85 Action trued/squared Sako Trigger set at 1lb 3oz McMillan A3 stock bedded Benchmark fluted barrel 26"  1-7 twist  shot less then 50 times 30 and 34mm scope rings 2 magazines 9- hornady cx 180gr(ammo) 25-hornady eldx 200gr(ammo) 200- once fired norma brass 200- new lapua brass 300- hornady cx 180gr bullets Redding type s match dies $4400 for gun, clips, and rings $5500 for everything  Would consider trades on optics Located in Calgary 

categories:Sporting GoodsGuns

3352 impressions

122 views

P.C.I. Ammo 38-55 WCF 245gr – Box 20 rounds Newly manufactured factory ammunition made with STARLINE 38-55 new brass Cast Lead 254 gr RNFP bullet sized 0.379″ wax lubed Smokeless Load Approx. 1350 f.p.s. These loads are suitable for ALL firearms in safe and good condition - Lever action rifles, single shots etc. Hunting or target use

categories:Guns

21136 impressions

1706 views

P.C.I. Ammunition 41 LONG COLT – 200gr HBRN SMOKELESS POWDER - 50 rounds This is loaded ammunition with new STARLINE 41 LONG COLT brass and a soft cast lead Hollow Base Round Nose Bullet over a charge of smokeless powder. Suitable for all firearms in good condition in this caliber

categories:Sporting GoodsGuns

5987 impressions

807 views

P.C.I. Ammunition 41 LONG COLT – 200gr HBRN BLACK POWDER - 50 rounds This is loaded ammunition with new STARLINE 41 LONG COLT brass and a soft cast lead Hollow Base Round Nose Bullet over a charge of black powder. Suitable for all firearms in good condition in this caliber

categories:Sporting GoodsGuns

6504 impressions

683 views

P.C.I. Ammo 38-55 WCF 245gr BLACK POWDER- Box 20 rounds Made with 38-55 new brass Cast Lead 254 gr RNFP bullet sized 0.379″ lubed BLACK POWDER Approx. 1150 f.p.s. These loads are suitable for ALL firearms in safe and good condition – Lever action rifles, single shots etc. Hunting or target use.

categories:Guns

14394 impressions

939 views

If this ad is up then item is still available. For Sale - one Lee Precision .455 Webley full length steel sizing 3 die set, crimp die not included. $90 - firm! No trades, offers or deals at this time!  Brand new in box – new manufacture:  -full length sizing die  -bullet seating die  -expanding die  -powder scoop  -shell holder  -data, load chart, and instructions  -handy red box  I have brass available for this caliber as well, just ask! EMT or cash at pick up - Remote pick up available by appointment only, house drop box or shipped at buyers expense within Canada only. Small package/tracked, all provinces - $22 Text, email, or leave message

categories:Sporting GoodsGuns

1579 impressions

93 views

213x once-fired (some twice) brass. most are ww super, some are RP, and the rest are mixed (f.c., frontier). $150 for the brass 63 225gr hornady interbond bullets (tungsten disulfide coated) $50 80x 225gr hornady SST bullets (tungsten disulfide coated) $65 2x50pc boxes of 250gr Partitions $100/box or $400 for everything. I might be able to find a set of dies too, if you need them. If so, I'd want about $60 reasonable offers entertained. No trades, unless you have a .357 carbine like the Rossi LWC or a handi rifle, I can add some cash too. prefer a local sale.

categories:Sporting GoodsGuns

800 impressions

82 views

For Sale $38,000 obo Willing to Part Out Brass Casing Processing and Ammunition Reloading Business I have for sale my brass casing processing and ammunition reloading business venture. Due to sudden health changes, I can no longer do this and have to sell quickly. Make me an offer. I have acquired all the equipment and raw materials to get the business up and running. There is enough brass casings to provide a return of approximately 25% to 40% of capital investment, at new prices. I have purchased all this equipment new, most of it imported from the USA, from Dillion Precision and Mark 7 to name a few, paying for all shipping and import duties. Due to these sudden health changes, I am no longer able to proceed with my home based business, and I have to sell it all immediately. My plan was to do this as a hobby, and take the processed brass to gun shows, farmers markets and other local and provincial events that I could attend. Processed brass does not require a PAL to possess and/or sell/purchase. Process brass that is unloaded does require a PAL to possess and/or sell/purchase. I am an avid hunter, sport shooter, and into long range accuracy as well. I was also going to reload my own ammunition with the same equipment, so I purchased the best possible for the most accurate and reliable brass and ammunition possible. I am not selling any gun powder, primers, bullets or completed ammunition. I would like to sell this as a package to an interested party. Breaking it up may make it less enticing to an interested party, but I may sell equipment individually if there is no interest in the whole package. Most of the equipment is unused, so it is in new condition. The rest of the equipment has limited use, to verify setup parameters and test end product for SAMMI specs and accuracy, so it is in near new condition. The brass is government issued, once fired, purchased through GCSurplus auction site. If you are skilled at brass processing and ammunition reloading, and are looking to expand your hobby into a small home based business that can turn a profit quickly, with reliable top quality equipment, this is what you are looking for. I have taken most of the guess work out of sourcing the proper equipment, providing all the operating and maintenance manuals to go along with equipment, with some resource books to help perfect your product. If you are part of a gun club that likes to process brass and reload their own ammunition, this is ideal for you. Please call me to view equipment, and I can answer any questions you may have. Please be aware, this is all high end processing and reloading equipment and it is not cheap to buy new. Yes, I am looking to sell, and yes I am will to negotiate, but be aware my price is still high, but not near the price you would pay to buy new today. I am asking $33,000 or best offer. Delivery and loading assistance can be arranged. Mike Logan 587-984-5851 mikelogan33833@yahoo.ca Edmonton, Alberta area

categories:Sporting GoodsGuns

5884 impressions

932 views

Selling 100 brand new never fired brass, unopened, 80$ value and a case of 300 count tmj plinker speed bullets. Also brand new. Asking 120$

categories:Sporting GoodsGuns

1443 impressions

79 views

This 338 lapua AI single shot is the ultimate long range machine. Defiance Rebel action, lilja 28” SS barrel, ATRS muzzle brake, Mcmillan Stock. Also come with competition die set, 100 brass, about 20 loaded rounds and 2 boxes of Hornady 285 grain A max bullets. SCOPE NOT INCLUDED

categories:Sporting GoodsGuns

113008 impressions

1009 views

For Sale - Lee Precision 7.62 Tokarev steel full length sizing 3 die set $85 - firm! 1 set available Brand new in box - Contains: -full length sizing die -expanding die -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box & Lee lubricant The resizing die is steel and is not self lubricating. Crimp die is extra & can be purchased separately but usually not req. / 7.62 Tok brass and projectiles are also available for extra, just inquire. Payment by EMT or cash - Pick up available by appointment only (cash), house drop box or shipped at buyers expense (emt) within Canada only by Canada Post. Small package/tracked, all provinces - $22 or $25-$28 if combined with other components. Text, email, or leave message / unable to answer calls in remote areas. No trades or offers If this ad is up then item is still available.

categories:Sporting GoodsGuns

17293 impressions

682 views

Selling my custom Remington 700 chambered in 6mm BR. Built for precision shooting with top-tier components and craftsmanship. Rifle has approximately 600 rounds fired and is in excellent condition. Build Specs: •Action: Remington 700 •Gunsmith: Craige Douglas •Barrel: Gaillard, 1:8 twist, chambered in 6mm BR with .271 neck •Stock: McMillan A5 •Optics: Nightforce NXS 8-32x56 with NPR-1 reticle •Bolt: Bushed firing pin, oversized bolt knob •Accessories: Butler Creek flip-up scope caps •There’s an aftermarket trigger in it, I think it’s timny Extras Available: •200 two and 3 times fired Lapua Brass •Berger 105gr Hybrid bullets •Pelican Vault V770 hard case Price: $4,000 (Extras negotiable if interested) This is a professionally built, competition-ready precision rifle. Perfect for someone looking for a proven 6BR setup with premium glass. I’m in Medicine Hat for a face to face.

categories:Sporting GoodsGuns

15294 impressions

675 views

Exchange of Hunting and Sporting Rifles WTS : Two 7mm-08, savage and remington Thread starterJimmy_grayson Start dateDec 4, 2025 Watch ••• Jimmy_grayson CGN Regular Dec 4, 2025 Add bookmark #1 First up is a savage axis in 7mm-08 compact. Scope is a vortex viper 3-9x40mm. Never hunted with, bought for wife and found a 308 she likes more so this one goes. $900obo Second is a remington 700 mountain stainless in 7mm-08. Scope is a swarovski z3 3-10x42mm. Bought this a few years ago and used very little so have decided to sell. $2200obo Both firearms well maintained and in excellent condition. I have an assortment of ammo that could be worked into the deal as well as some reloading components (dies, bullets, brass). Located in La Ronge, SK. Could arrange deal anywhere between there and North Battleford fairly easy. Prefer face to face deal at this time. Won't sell scopes separately until rifles are sold. Pics on request.

categories:Sporting GoodsGuns

5367 impressions

435 views