Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

25603 impressions

891 views

Howdy Townpost. I have here a nicely restored Cooey Model 82. I got the gun as an oil stained and sporterized target .22. It's had the stock nicely refinished in a satin urethane finish done in the fashion to mimic an old oil finished stock. The stock has a pretty nice grain pattern on the underside of it (pictured). The bore is excellent. The stock had a chunk out of it to accomodate a Lyman peep-sight and the receiver was drilled and tapped for it as well. That has all been repaired (pictured) and is hardly noticeable now. There was a hairline crack near the middle barrel band that was filled too. It probably wasn't necessary to fill especially on a .22 , but hey she's been filled. It has all the C-broad arrow markings present. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

20771 impressions

765 views

Cosmetically this unit is in mint condition, I would say it’s a 9.5/10. Priced to sell. These sell for crazy money, working or not. This hefty “Boombox” is actually comprised of 3 separate components held together by metal brackets and 2 detachable speakers. The heavy duty handle is removeable. Weighs 30lbs without batteries! Runs on AC or optional 10 X D cell batteries. Has 3 sets of RCA inputs, 1 is a dedicated phono input (built in MM pre-amp) and 2 are for a CD player, etc. The sound that pumps out of this thing is nuts. Components have had all the switches and pots cleaned with DeoxIT. Tested and everything besides the tape deck is working as it should. Also tested with a turntable. *Note: The tape deck is not functioning. Just had the belts replaced professionally and they noticed that one of the idler wheel assemblies has an issue. They tried to correct the problem, and it worked for a few days, then stopped working properly. Brought it back to them and they told me that it would need to be replaced. They could not find a replacement. Individual Components: TC-58 Tape Deck - Auto-reverse playback, automatic recording level, auto play and automatic sensor. ST-58 Tuner – AM/FM stereo with telescopic antenna and inputs for optional external antenna’s TA-58 Integrated Stereo Amplifier – 2 X 25 W into 8 ohm speakers on AC power or 2 X 3.5 W on battery power. Phono input plus 2 more RCA inputs. Built in 5 band graphic equalizer. APM-058 Speakers – 3-Way super wide speaker system, 4 ohm, 25W (nom) 50W (peak)

categories:Household ItemsElectronics

1052 impressions

148 views

CVA Apex .50 Caliber Muzzleloader Break Action Rifle 27" Barrel Realtree APG Camo Stock Stainless Finish. The Apex is one of the best break action, multi-barrel interchangeable rifle systems on the market today. Just by shouldering the Apex, the serious shooter will notice superior balance and fit, but the real test comes with the shooting. Every Apex barrel is made of the highest quality 416 grade stainless steel by Bergara Barrels, which are among the most accurate production barrels made in the world today. Apex's ambidextrous butt stock is designed specifically for scope shooting, with a height of comb that positions the shooter perfectly in line with the optics.Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Valid Pal a Must and will be verified for reference number. Please send message to: medal1958@gmail.com https://www.youtube.com/watch?v=SNBMV-n2jHw

categories:Sporting GoodsGuns

9463 impressions

778 views

Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Test fired with smokeless powder. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Colt M1892 "New Army" Revolver has significant improvements over M1889 with better locking and indexing mechanism. This one is in excellent condition. The nitre blue on the trigger and hammer is well visible and retains 95% of original blued finish. The action is strong and accurate, and the cylinder indexes and locks properly with zero play on trigger pull. The bore of the 4 1/2 inch barrel is excellent and mirror bright with perfect strong rifling. The markings are sharp and defined throughout. Extractor working as it should. The assembly numbers on the cylinder, crane and frame. The original grips are good and undamaged.​​ S/N 13345 History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand.The 1889 model would remain in production for 18 years, with significant improvements in 1892, 94, 95, 96, 1901 and 1903. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:Sporting GoodsGuns

19731 impressions

1170 views

Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Tested with smokeless powder. Colt M1892 "New Army" Revolver has significant improvements over M1889 with better locking and indexing mechanism. This one is in excellent condition. The nitre blue on the trigger and hammer is well visible. The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 4 1/2 inch barrel is fine with good rifling. The markings are sharp and defined throughout. Extractor working as it should. The assembly numbers on the cylinder, crane and frame. The original grips are good and undamaged.​​ History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand.The 1889 model would remain in production for 18 years, with significant improvements in 1892, 94, 95, 96, 1901 and 1903. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:Sporting GoodsGuns

21105 impressions

2342 views

Selling a Safari Arms Kentuckian rifle. Made by Investarms in Italy and imported by Safari Arms. 50 caliber black powder only. No noticeable rust or cracks. Rifling appears good and seems to work as intended. Has ramrod. Selling for $500. Shipping available at buyers expense.  Disclaimer: this item is sold as is and the description is given to the best of my ability and knowledge. Feel free to ask any questions and I will do my best to assist in any way possible. Do not buy this item if you are not sure about it as no refunds will be given. 

categories:Sporting GoodsGuns

4603 impressions

338 views

Selling a Lee Enfield No 1 Mk 3. Produced by BSA in 1915. In overall good condition, bore is good, no noticeable rust. Selling for $1000. PAL required. Shipping available at buyers expense. Disclaimer: this item is sold as is and the description is given to the best of my ability and knowledge. Feel free to ask any questions and I will do my best to assist in any way possible. Do not buy this item if you are not sure about it as no refunds will be given.

categories:Sporting GoodsGuns

14766 impressions

720 views

Selling a Schmidt Rubin 1889 in 7.5x53.5. 1895 production date. Overall condition is very good. The action and barrel are in good condition, the stock is very good with no noticeable cracks. Bolt knobs are cracked with one part missing. Selling for $550. Shipping available at buyers expense. Disclaimer: this item is sold as is and the description is given to the best of my ability and knowledge. Feel free to ask any questions and I will do my best to assist in any way possible. Do not buy this item if you are not sure about it as no refunds will be given.

categories:Sporting GoodsGuns

16219 impressions

670 views

Great little rifle made in Germany Diana R-22 22LR, Carbon fiber wrapped barrel, super accurate, less than 200 rounds shot, all the rounds were shot CCI mini mag 36gr. Diana R-22 features an ergonomic all-weather polymer stock in an attractive OD Green. The hammered precision carbon fiber wrapped barrel comes with a 1/2” UNF muzzle thread with countersunk muzzle. The dry-standing direct trigger offers an adjustable trigger weight of approx. 2-2.9 lb. Picatinny rails on receiver and forend allow for sturdy optics and bipod mounting. With a proven heritage of precision and accuracy the new Diana R-22 rimfire rifle sets the new standard in performance rimfire target shooting. Caliber: .22LR Capacity: 10 Rounds Action: Bolt Action Stock: Fixed, Polymer, OD Green Sights: Open Barrel: 18.5" Carbon Fiber Trigger Weight: 4 lbs. Overall Length: 37.5" Weight: 6.1 lbs. *** Notice, in order to purchase this rimfire rifle must comply with the law, I am required by law to see possession of legal firearm license and verify by RCMP website***

categories:Sporting GoodsGuns

18046 impressions

727 views

Selling brand new Vortex Viper HD 12x50 binoculars. Never used, never taken into the field — just no retail box. Glass is flawless, body is untouched. These are premium optics — noticeably sharper, brighter, and clearer than mid-range models. Built for people who actually use their gear. 🔹 12x magnification with 50 mm objective lenses — excellent long-range detail and low-light performance 🔹 HD (High Density) extra-low dispersion glass for outstanding resolution, edge-to-edge clarity, and accurate color 🔹 XR fully multi-coated lenses and dielectric-coated prisms for maximum light transmission 🔹 Argon purged, waterproof, fog-proof — performs in rain, cold, heat, and everything in between 🔹 Rugged magnesium chassis with rubber armor — strong without being heavy 🔹 Smooth center focus, adjustable eyecups, comfortable to glass for long periods Includes factory accessories (padded case, lens covers, cleaning kit). These are ideal for hunting, wildlife observation, glassing open country, birding, or range use. Optics are clean, clear, and scratch-free. No issues — they look and function exactly as they should. Asking $800 OBO If you know Vortex, you know the VIP Lifetime Warranty speaks for itself, no need to transfer ownership, they are fully covered for life, no questions asked! Never used.

categories:Sporting GoodsCamping and Survival Gear

462 impressions

129 views

Smith Wesson 1854 Lever Action in 357. Brand new. Threaded muzzle. Never fired(it probably went through test fire from factory though). Comes with orignal box. Has a Bushnell Elite Tactical Scope 10x40 attached. Mil Dot Reticle. They must go together. You pay around $2200 after tax for the rifle alone. I'm asking $2000 shipped to your door with the scope and everything. No trade plz. Please do not use townpost message system becasue I can hardly notice if there's a new message. Text me please.

categories:Sporting GoodsGuns

2567 impressions

143 views

Do you have Gophers, Coyotes, or a really bad flinch? Buy this Ruger American and you will come away as the owner of a sweet .204 laser beam for varmint control. We're talking 4000 fps, point blank range of 250 yards, and 5 lbs of felt recoil. Gophers, dead. Coyotes, dead. Pigeons, dead. Typical grouping is under 1" @ 100 yards with factory ammo. The best I've done has been 3/8" @ 100 after some lengthy round development. As you might have noticed, this particular American has been kitted out with a Bell and Carlson stock (1053_97) and a AICS box magazine well (0050_00). The Ruger stock was a flimsy piece of furniture; this B&C is much better, more stable, and wasn't particularly inexpensive. If I were to buy this rifle new, exactly as is, it's be a $1700 touch after tax. I'm willing to let it go for $1000, firm. You won't be disappointed.

categories:Sporting GoodsGuns

1328 impressions

97 views

Self defense protection ball cap. Simple, least noticeable personal defense . Impact material sewn in to back of cap is 100% the density of lead. Velcro adjustment to fit all sizes. Brand NEW. retail is around $30 USD .

categories:Sporting GoodsCamping and Survival Gear

2048 impressions

182 views

EP8 1-8x28 FFP LPVO - 34mm Tube The LPVO has long since earned its place, bridging the gap from holographic/ red-dot types to high magnification optics not traditionally well suited in CQC situations. With ever increasing capability, the LPVO has become a staple allowing tactical teams and competitive shooters to get the most out of any particular member, instantly. The EP8 1-8’s thin edges and wide FOV make this true 1X perfect for close quarters, with a quick throw of the lever to 8X increasing effective range at a moments notice. Magnification: 1-8 Objective Diameter: 28mm Eye Relief: 3.74" FOV @ 1x: 121.15', 22 deg FOV @ 8x: 14.56', 2.78 deg Tube Size: 34mm Turret Adjustment: 1/4 MOA Reticle Position: FFP Reticle Details: BDC style: 'KL Box' Elevation Adj. Range:: 110 MOA Windage Adj. Range:: 110 MOA Illuminated Reticle: Red Turret Rotation: Counter Clockwise (CCW) Color: Matte Black Weight: 21 oz Sunshade: No Battery Included: CR2032 Throw Lever: Integrated/removable

categories:Guns

8502 impressions

750 views

The DRS-NV (Digital Rifle Sight-Night Vision) is a red dot and digital night vision fusion sight that combines Holosun’s red dot sight technology with digital night vision capability. DRS-NV features an LED MRS (Multi-Reticle System) with three digital reticle options, 1024x768 resolution digital night vision sensor with up to 60fps, 8x digital zoom, digital image and video recording with on-board storage. The DRS is powered by two 18350 rechargeable flat-top batteries with 6 hour run time in full function mode and 8 hours of run time in observation mode. An onboard magnetic coupler connects DRS to USB power for charging the batteries or to a PC for downloading of recorded images and video. DRS-NV units amplify light to improve low light visibility. Moonlight and starlight provide sufficient lighting in most cases, however, during periods where cloud cover blocks moonlight and starlight, an external infrared (IR) illumination source is needed. Holosun recommends one of our laser devices with IR Illumination such as the LE321, or LS321. Verify your local and/or state laws before attaching and IR illumination device to a firearm with a night vision device. Notice 5/6/2024: An updated user manual is available on this product page for download. Page 16 has been updated to reflect an Auto-Off function instead of a Shake Awake function for the camera. The LED Red Dot System does feature our Shake Awake functionality while the camera system has an Auto Off function. In the Box 2x 18350 Li-ion Rechargeable Batteries Multi Tool Wrench Lens Cloth USB Cable

categories:Sporting GoodsGuns

3775 impressions

704 views

1992 Eagle Vista wagon(space wagon) old school Japanese tech)= 2L 4Cylinder automatic Couple small rust bubble spots bearly noticeable. 3rd row seating. 175k super efficient and reliable . Great in the snow and rugged stuff - Rare car for its age (vintage collector plates/insurance) Bonnyville area farm still available Txt for info# 7808129038

categories:Auto and TrailersCars

2127 impressions

282 views

RED RESCUE Flares, great for Hunters, backpackers, hikers, boaters, anyone that may want to have more visibility in the out of doors. Will reach up to 50 stories (500 ft.) (152 meters)Shot above your head.Can be seen 20 miles or more.New (old stock) surplus. Work Great to shoot off at New Years. Or anytime you need to let people know you need some help (SOS) (not sold for commercial boats.) Or boats over 19 ft long. These are SURPLUS FLARES Regular price is $100.00 for 5 flares. MY price is $25.00 for 5 flairs. $40.00 for 10 flairs. $100.00 for 30 flairs Come in packages of 5 flares. Plus shipping. Check with us, which gun shows we will be attending and you can pick them up at the show? Call or text 306-221-9599

categories:Sporting GoodsGuns

20774 impressions

1892 views

Rent your rural or secondary suite, within commuting distance to Calgary, to a respectful, reliable, mom & adult-daughter team. The benefits of having conscientious, fit & capable, knowledgeable, peaceful, compassionate folks caring for your property are too many to list. Needed March 1, 2026 or later, with 1 month's notice We have a well cared for and tended medium sized dog, and a cat We're a full-time, remote worker and student. Crystal 403-603-8547

categories:Real Estate and Rentals

184 impressions

41 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2685 impressions

443 views

Properly sized to fit standard SKS chest rig pockets. Consistent reloads every time. Simple, lightweight, and easy to use. Makes a real difference for very little cost. See it in action in the link below https://youtube.com/shorts/kWRs6mGWjx8?si=sGBKLfwlzI0qFIU5 What it does Stabilizes the stripper clip Keeps rounds aligned during loading Reduces binding, tilting, and slipped rounds Why SKS owners like it Makes reloading noticeably easier and quicker No permanent modification Installs and removes in seconds Fully legal, non-regulated accessory Lightweight and durable Details Designed specifically for the SKS Made from tough plastic Compact — keep it in your range bag Works with standard SKS stripper clips Price $20 each 20pk  2 versions with different shaped holes.  Shipping available across Canada $5 , E-Transfer  Located in Aurora, ON Full Disclaimer: This is not my invention, it was sourced from https://www.thingiverse.com/thing:4141412 Under https://creativecommons.org/licenses/by/4.0/ I am able to commercially produce this product.  

categories:Sporting GoodsGuns

1036 impressions

98 views