Photo of French Service Antique Revolver M1892, swing out cylinder $4300
$4300
French Service Antique Revolver M1892, swing out cylinder $4300
Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Ammo is available but sold separately. This one can soot 3 factory loaded modern types of ammo including original 8mm, 7.5mm Nagant and 32S&W Tested with smokeless powder. Comes with FRT paperwork. French Model 1892 Service Revolver in 8mm lebel caliber, 4.5" barrel, 6 shot. Very well built and robust . Fiocchi manufacturers modern 8mm ammo as well. The action functions excellent in single and double action. Timing and lockup are very good. Lanyard ring is undamaged. The gun is in excellent condition, with 99% of the arsenal blue intact. There is no surface pitting. The markings are sharp and complete. The action is tight and accurate, and the cylinder indexes and locks properly with no play. The bore of the 4 1/2 inch barrel is excellent and bright. The rifling is sharp and uninterrupted. The walnut grips are very good and undamaged, showing no wear. SN G10123, dated 1897. The Model 1892 revolver (also known as the "Lebel revolver" and the "St. Etienne 8mm") is a French service revolver produced by Manufacture d'armes de Saint-Étienne as a replacement for the MAS 1873 revolver. It was the standard issue sidearm for officers in the French military during the First World War. The Modèle 1892 revolver is a solid frame revolver with the cylinder on a separate frame swinging right for manual reloading. The Modèle 1892 was first fielded in 1893 and was prominent among French military officers during First World War, and later the French police until the mid-1960s.
categories:Sporting GoodsGuns
3793 impressions
196 views
Mississauga, ON4 days ago
Photo of Valmet Jyvaskyla Standard . 22LR Competition single bolt actionValmet Jyvaskyla Standard . 22LR Competition single bolt action
$1200
Valmet Jyvaskyla Standard . 22LR Competition single bolt actionValmet Jyvaskyla Standard . 22LR Competition single bolt action
Made in Finland M22000 Valmet Jyvaskyla Standard . 22LR Competition single shot bolt action. 27.5" heavy competition barrel. Adjustable butt plate and set trigger. Friction T channel sling slot. Profiled competition heavy stock for right handed use. Bushnell 3-9 x 20 scope with dovetail rails on receiver. Drilled and tapped for rear sight with front sight mount. VKT (Valmet), or the State Rifle Factory became operational September 9, 1928. Since 1930 Valmet's factory rifle club was active as well, having their hand in the design of the Finnish Lion, together with Aimo Lahti, the chief designer. 2. The Finnish Lion has the longest manufacturing time of all Finnish guns, from 1930 to 1979. Models are: M30 (prototype), M31 mod I, mod IIa, IIb, IVb, IVc, M35, M45, M52, M55, M59, M62, M65, M70, M200002 (Finnish Lion Standard) and wild boar version. Heavier models were the Finnish Lion Match and Champion. Two lighter version were also made, Junior and Pikku Leijona (Little Lion). 3. Serial numbers start from #1 (1932), and end into # 14,358 (1979). 4. The bolt and trigger are said to have been ahead of their time. The lock time is fast. Also the barrels were accurate. Champion models should have a set trigger, which makes lock time longer, but reduces pull weight. 5. Some of Vlamet's success in competition: WORLD RECORDS: -Lucerne 1939, 40 shots prone -400 points, Toivo Mänttäri -Buenos Aires 1949, 3x40 team contest 5770, finnish team, 40 shots standing, 380 points, Pauli Janhonen WORLD CHAMPINSHIPS -Buenos Aires 1949, 3x40 shots, 1165 points, P. Janhonen -Stockholm 1947, 40 shots standing, 377, H. Erben 6. The Helsinki Olympics in 1952 was the prime time of the Lion. A quarter of all shooters shot the Lion, prone gold was won by a Romanian - a Mr. Sirbu, score 400. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.
categories:Sporting GoodsGuns
32368 impressions
1252 views
Saskatoon, SK5 days ago
Photo of Hollis Screw-Barrel .40 Cal. Percussion Antique Coat Pistol
$1200
Hollis Screw-Barrel .40 Cal. Percussion Antique Coat Pistol
Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.
categories:Sporting GoodsGuns
10507 impressions
272 views
Calgary, AB1 week ago
Photo of Nock .40 Cal. Spring-Loaded Bayoneted Screw-Barrel Percussion Antique Coat Pistol
$1950
Nock .40 Cal. Spring-Loaded Bayoneted Screw-Barrel Percussion Antique Coat Pistol
Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.
categories:Sporting GoodsGuns
10803 impressions
235 views
Calgary, AB1 week ago
Photo of 12GA to 22LR/22short SMOOTH/ RIFLED BORE  Adapter - Stainless steel NEW $110
$110
12GA to 22LR/22short SMOOTH/ RIFLED BORE Adapter - Stainless steel NEW $110
Please text anytime 6476871484. Brand new $100-110 12GA to 22 LR or 22 Short Adapter - SMOOTH BORE OR RIFLED!!! Precision machined from stainless steel Made in USA. This adapter has a SMOOTH Bore (rifled) This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 22lr bullet. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell. It will easily fit into your break open shotgun barrel and accept any 22LR or 22 Short ammunition. After firing simply remove the adapter and tip upside down to remove the spent 22 shell, or use your finger nail to grab and remove the shell while the adapter stays in your gun. The wide groove cut in the face will not only allow you to easily remove a spent shell but also provides a recessed clearance area for your firing pin. Adapters that don't have this recessed area (or recessed area in the wrong spot) do not provide the proper clearance for your firing pin and may damage your shotgun. A SMOOTH bore is reamed through the adapter for the bullet. Adapter orientation is not important and the adapter will work in any position. Will fit any break open gun with 2 3/4" or 3" chambers. Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 22LR / 22 Short bullets. Surprisingly accurate! Not recommended for pump action or semi-auto shotguns. Designed for use with break open shotguns. This chamber / caliber reducer will not work with 22 magnum ammunition. Any ammunition pictured is for representation purposes and is not included with this purchase.
categories:Sporting GoodsGuns
38717 impressions
3075 views
Ontario1 day ago
Photo of 12GA to 22 Magnum SMOOTH BORE - gun Adapter - Stainless NEW $110
$110
12GA to 22 Magnum SMOOTH BORE - gun Adapter - Stainless NEW $110
Please text anytime 6476871484. Brand new 12GA to 22 MAGNUM Shotgun Adapter Designed for break-open shotguns Precision machined from stainless steel made in the USA This adapter has a SMOOTH BORE This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 22Magnum bullet. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell. It will easily fit into your break open shotgun barrel and accept any 22 Magnum ammunition. After firing simply remove the adapter and tip upside down to remove the spent 22 shell, or use your finger nail to grab and remove the shell while the adapter stays in your gun. The wide groove cut in the face will not only allow you to easily remove a spent shell but also provides a recessed clearance area for your firing pin. Adapters that don't have this recessed area (or recessed area in the wrong spot) do not provide the proper clearance for your firing pin and may damage your shotgun. A smooth bore is gently reamed through the adapter for the bullet (no rifling). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Carry one gun and have the ability to shoot not only 12GA shells but also 22 Magnum bullets Surprisingly accurate! Not recommended for pump action or semi-auto shotguns. Designed for use with break open style shotguns. This chamber / caliber reducer will NOT work with 22LR/22 long/22 short ammunition.
categories:Sporting GoodsGuns
28552 impressions
2304 views
Ontario1 day ago
Showing 21 of 111 records
Location
Search within
of
Categories

Other
Medical Equipment

Transportation options

Local Pickup97Can Deliver15Can Ship51