I’m selling my custom made .300 win mag. All info on it is below: 300 Winchester Magnum Santa Barbara Mauser RKS stainless steel barrel with gain twist finishing at a twist of 10:1 with continuous choke taper of .0004" from chamber to muzzle. Timney trigger set at 3 lb.s for hunting. Boyd's walnut stock finished with Watco medium walnut Danish oil. Maximum Cartridge Overall Length the magazine can accommodate is 3.360" and Minimum O.A.L. is 3.340" for these loads. Maximum ogive for this rifle is 2.964" Willing to entertain trades for a different .300 stainless or high quality scopes.

categories:GunsSporting Goods

7300 impressions

554 views

This has only shot 10 rounds since new , and was shot to sight in to 200 yards on new scope Comes with bi-pod Rifle sling Rifle scope included

categories:GunsSporting Goods

9739 impressions

579 views

Remington 700 LSSF TH DM. Black laminate thumbhole stock and 24" stainless steel fluted barrel, removable mag, muzzle brake. Has been bedded and pillared by ATRS. Can meet in Calgary area. Email is preferred right now as I am at work.

categories:GunsSporting Goods

10435 impressions

805 views

I am parting with my brass in .270, .308, 7mm Rem Mag & 8mm mauser (ONCE FIRED BRASS) Has been deprimed, washed in Lyman stainless steel pin rotary and dried in frankfurt air dryer. 2- bags of .270 FC stamped - 60 count/per bag $20 PER BAG 2- bags of .270 Win stamp - 60 count/per bag $20 PER BAG 103 bag - .308 $40 60 bag - 7mm Rem Mag $50 64 - 8x57 Mauser $0.35 per 14 live factory loaded 8x57 mauser $25

categories:GunsSporting Goods

36300 impressions

881 views

6.5 x .300 WSM -Kreiger SS 8 twist #7 Fluted -24”(26”OAL with 3 gill break) -Spiral fluted bolt body -Aluminum bolt shroud - Stainless steel recoil lug - McMillan A3 layed in Carbon Fiber -Talley one piece lightweight rings machined 30moa -Redding FL die set -Redding NS die -3 magazines -100 ct Win brass (50 new 50 twice fired) -Scope not included -Shipped in Fitted Cabelas Airline case $2000 shipped

categories:GunsSporting Goods

28724 impressions

1506 views

Weatherby Vanguard in .30-06, stainless steel, in excellent condition with low round count. 🔹 MDT field stock 🔹 5-round steel magazine 🔹 Topped with Vortex Viper 4-12x40 PA (Lifetime warranty by Vortex) 🔹 Vortex Pro rings & Burris base 🔹 Proven accuracy: 0.5” @ 100 yards PAL Verification Required 💰 Asking $1700 🚚 Shipping at buyer’s expense

categories:GunsSporting Goods

14457 impressions

813 views

RUGER 10/22 TAKEDOWN CUSTOM HUNTER GREEN COLOR. COMES WITH STANDARD MAGAZINE. PROBABLY ABOUT 200RDS THROUGH THE BARREL. STAINLESS STEEL BARREL

categories:GunsSporting Goods

8193 impressions

1055 views

3 1/2 inch chamber, 28 inch stainless steel barrel with weatherproof coating, extended over decoys choke, and sling. PAL required.

categories:GunsSporting Goods

4620 impressions

601 views

Stainless steel Ruger 10/22, 50th anniversary. Leopold 8m -4x scope, upgraded bolt. Magpul stock but also have original stock. Nice case and two magazines with bumper pulls. Very nice gun in excellent condition.

categories:GunsSporting Goods

13223 impressions

1121 views

Remington 700 Stainless in 308  Action trued and accurized, 416 Stainless Steel in sportster contour, 24 inch long barrel  Hogue stock  Upgraded Legacy Sports removable magazine  Built for a mountain trek hunt, approx 80 rounds down the tube  Located in Sherwood Park AB Will consider trade for Benelli R1 3006 or 300, Ruger Ranch in 7.62x39, Ruger Precision 308 / 6.5CM. Can add cash on my end if required

categories:GunsSporting Goods

31247 impressions

2744 views

For sale, custom built .300 win mag. All details below. 10 rounds down range. Comes with custom built ammo and sighted in: .300 Winchester Magnum Santa Barbara Mauser RKS stainless steel barrel with gain twist finishing at a twist of 10:1 with continuous choke taper of .0004" from chamber to muzzle. Timney trigger set at 3 lb.s for hunting. Boyd's walnut stock finished with Watco medium walnut Danish oil. Maximum Cartridge Overall Length the magazine can accommodate is 3.360" and Minimum O.A.L. is 3.340" for these loads. Maximum ogive for this rifle is 2.964" 26 rounds of 200 grain Nosler Partitions and 48 rounds 220 grain Winchester Super X Silvertip Expanding bullet to hunt with. The rifle is zeroed to shoot the 200 grain bullets at 200 yards and the 220 grain bullets at 100 yards. $2500.00 OBO trade offers are welcome.

categories:GunsSporting Goods

13202 impressions

902 views

Next generation impact- and crush-resistant polymer construction • Paint-pen dot matrix panels allow identification marking • Self-lubricating follower increases reliability • Flared floorplate aids handling • Easy to disassemble for maintenance A larger-capacity version of the proven PMAG 5 7.62 AC. Magpul®’s PMAG 10-Round 7.62 AC Magazine uses next generation impact- and crush-resistant polymer construction to create this durable and extremely reliable polymer magazine for .308 Winchester-based family of cartridges. The self-lubricating follower increases reliability. Paint-pen dot matrix panels on the bottom of the body allow identification marking. Flared floorplate aids magazine handling and is super easy to disassemble for maintenance. Equipped with a long-lasting stainless steel spring. Compatible with short-action AICS-spec bottom metal and cartridges built on a 0.470" case head. Accepts cartridge lengths up to 2.86".

categories:GunsSporting Goods

8977 impressions

540 views

Authentic 1911 replica design Tactical rail allows for accessory upgrades Full metal construction stainless steel finish Realistic blowback action Beavertail grip safety prevents misfires White dot sights improve targeting Comes with magazine 1500 BBs 25 CO2 Cartridges Caliber: 4.5 mm/.177 Calibre Action: Semi-Automatic FPS: 350 to 370

categories:GunsSporting Goods

10565 impressions

1100 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2553 impressions

398 views

Brand new Manufacturer: SGM Tactical Fits: GLOCK 22/23/27/35 Caliber: .40 S&W Capacity: 10/31 Rounds Spring Material: Stainless Steel Spring Body Material: Polymer With Heat Treated Metal Lining Follower Material: Polymer

categories:GunsSporting Goods

10403 impressions

1059 views

Prices A - Single Sided Kit - $20 B - Double Sided Kit - $30 **$5 off each additional kit for any order combo (2 or more) **Ex. A+B=$50-($5 discount)=$45 Total **3x A=3*$20=$60-2*($5 discount)=$50 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) ___________________________________ Single Sided Specs/Instructions Specifications Black Anodized Stainless Steel Weight: 0.2oz (6g) Length: 0.571" (14.5mm) Equivalent to Magpul Type 1 Sling Mount Kit Kit comes with the following 1x Stainless QD Insert 1x Stainless Washer 1x Stainless Nut 3x Stainless Screws (1/2", 3/4", and 1") What you will need 1/8" Allen Key Wrench 5/16" Socket Screwdriver/Wrench Blue Loctite (Optional) Instructions 1. Insert QD Insert into stock on the desired side 2. Insert one of the 3 screws through the hole on the QD Insert 3. Insert a washer on the opposite side 4. Apply a drop of Loctite on the threads of the nut (optional) 5. Using the Allen Key Wrench and 5/16" Socket fasten the nut on the screw 6. Fasten the assembly until snug using the Allen Wrench ___________________________________ Double Sided Specs/Instructions Specifications - Black Anodized Stainless Steel - Weight: 0.4oz (12g) - Length: 0.571" (14.5mm) *each insert* - Equivalent to Magpul Type 1/Type 2 Sling Mount Kit Kit comes with the following - 2x Stainless QD Insert - 4x Stainless Washer - 3x Stainless Screws (1/2", 3/4", and 1") What you will need - 1/8" Allen Key Wrench - Blue Loctite (Optional) Instructions 1. Insert QD Inserts into stock on both sides of the stock 2. Insert one of the 3 screws through the hole of the unthreaded QD Insert 3. Using the Allen Key Wrench thread the screw and temporally fasten the assembly together 4. Function check using the QD Sling Mount on both sides 5. If the bottom of the screw is protruding too far out, remove the QD Inserts and shim off the QD Inserts with the provided Washers 6. Once the correct Screw and Washer Shims (Optional) is determined, the assembly can be fastened together 7. Apply a drop of Loctite on the threads of the Screw (optional) 8. Fasten the assembly until snug using the Allen Wrench 9. *If the Threaded Insert is spinning on it's own, the Insert can be retained via Retaining Hole with a smaller Allen Wrench (See Last Image)

categories:GunsSporting Goods

9575 impressions

1037 views

Brand new Includes One Magazine, Speed loader and carry case Fits Glock 20/21 GEN 4 Features Adjustable Sights The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevation. Last Round Lock Open The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on ‘Advantage Arms’ .22LR Conversion Kits for the GLOCK pistol. Internal Firing Pin Safety Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm. Finish All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel. 10 Second Installation Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice. One Year Factory Direct Warranty Warranty covers any defects in materials or workmanship. (Excluding S&H Charges). Note: Do not use Stinger or any other hyper velocity ammo Do not use Remington Thunderbolts Made in USA

categories:Guns

13419 impressions

1174 views

Brand new Heavy-Duty quick-disconnect (QD) sling swivel Push-Button quick-detach function for 1-1/4" webbing Rugged manganese-phosphate finished steel construction Compatible with standard QD sling attachment points The Magpul QD Sling Swivel keeps your rifle sling rock steady when you depend on it most. This heavy duty quick-disconnect tactical rifle sling swivel features a push-button quick-detach function specifically for 1-1/4" webbed strapping. The rugged manganese-phosphate finished stainless steel construction lets you know it's ready to work as hard as you do. The Magpul QD Sling Swivel works perfectly with standard QD tactical sling attachment points.

categories:Guns

2201 impressions

342 views

Brand new Compatible with short action AICS (Accuracy International Chassis Systems) pattern bottom metal and cartridges built on a 0.470" case head such as 7.62x51/.308 Winchester, 7mm-08 Remington, 6.5mm Creedmoor, .260 Remington, .243 Winchester, and others Accepts a cartridge overall length of up to 2.86" Next-generation impact and crush resistant polymer construction Self-lubricating follower for increased reliability Long life stainless steel spring Paint pen dot matrix panels on the bottom of the body to allow for identification marking Flared floorplate aids magazine handling and is easy to disassemble for maintenance NOTE:  Not compatible with smaller base diameter cartridges such as .220 Swift, .223 Remington, .300 AAC Blackout, etc. or larger short action magnums. In addition, due to the wide variety and potential combinations of aftermarket receivers, stocks, chassis, and bottom metal that accept AICS pattern mags, minor fitting may be required. Not compatible with Accuracy International AE rifles or semi-auto platforms utilizing SR25/M110 pattern magazines.

categories:GunsSporting Goods

28017 impressions

618 views

.300 Ultra mag in a Montana Riflemen Action for Sale. It has a 3 was safety on this Stainless Steel bolt action with a 3.5lb trigger pull. The stock is a synthetic olive green Macmillan. KS Arms did the bedding and built a 25” Stainless Steel #4 barrel with a detachable muzzle break. The rifling is done in a Gain Twist. Comes with Stainless Steel mounts and 30mm rings. This gun hasn’t shot 100 rounds. One owner. 2 boxes of ammunition in 200 grain. Awesome unit, I’m getting old, shooting smaller calibers. Haha

categories:GunsSporting Goods

2107 impressions

357 views

I have a Remington model 700 300 short mag for sale rocky moutain elk edition . 3x9 Leopold scope. Stainless steel with synthetic camo stock. Top loader comes with 4and half boxes of ammo . but pad is a little sticky. Been hunted with so a few marks here and there 2000obo 7802787883

categories:GunsSporting Goods

4307 impressions

517 views