Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:GunsSporting Goods

10674 impressions

365 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

8791 impressions

239 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

9074 impressions

212 views

Howdy Townpost! I've gotten my hands on some stubby steelies! These are new production Yugoslavian military patterned magazines made in Croatia. These are well made and the milling was done well too. These are all properly pinned to 5 rounds. And are nice for hunting with a shorter mag or hauling it around with a shorter and lighter mag when compared to standard a 5/30 rounder. These magazines will also work with an AK magazine coupler (I have these for sale for $20). Which for an SKS-D some plastic on the coupler must be removed first. The M10X should work with a coupler without issues the same goes for the WK-181 and modded mags in the Type-81. These can be modified to fit into a Type-81. I also have modded mags for sale which are $55 each. I am the only seller who has these Croatian 5/10's in Canada. Even the crappy Gen.1 KCI 5/10's are out of stock practically everywhere in Canada. This is a limited run, so don't miss out. The mags are $40 each. The mags will come in a plastic bag in preserving oil that can be easily cleaned up with any degreaser or simply hot water and dish soap in your kitchen sink with a quick scrub and then dried. It's a good idea too to apply a light coat of gun oil. A single drop rubbed across the entire mag is enough. These mags will fit in the SKS-D, the M10X series, and they might require some hand fitting to work in the WK-181, since Kodiak designed those things with odd magwell dimensions with PMAGS in mind. In all likelihood though, they will work out of the box for you. The magazines are located in SW Calgary and can be picked up anytime. I am also happy to ship nationwide, this is of course at the buyer's expense. Shipping within my region will cost $13-15, and nationwide elsewhere is $18.89 flat rate. If you order more than 6 mags, shipping will be $21. If you want to order a large amount 10+ shipping will definitely be more.

categories:GunsSporting Goods

51927 impressions

1288 views

Howdy Townpost. I've a neat old single shot 12 gauge made by Savage. It has a nice and light tenite stock that was sanded at one point to give it a matte finish. The shotgun is very tight and not off the face at all. The gun is very light and handy sitting 5.73lbs. It has a 12 gauge 2 3/4in, 28in full choke barrel. The patent number is molded into the plastic stock interestingly enough. The black paint on the trigger guard is flaking of a little. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. It's pretty short when broken down, and is light so it should be relatively inexpensive to ship. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:GunsSporting Goods

12532 impressions

639 views

Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g

categories:GunsSporting Goods

75508 impressions

2308 views

Never worn,. Blue Jays and hockey jerseys Will sell singles or groups

categories:GunsSporting Goods

6115 impressions

260 views

Wow, here is an opportunity to own something truly unique. Overall condition, very good.  Make: MFG FRANCAIS D'ARMES & CYCLES DE ST ETIENNE Model: Joesph Dumonthier Cane Gun Caliber: 9MM FLOBERT RF (have ammunition 50 birdshot, 50 bullets.)  Bore: Very Good, Shiny Comes With: Brass and Lead Muzzle Cover, Steel Butt Stock Action: Single Shot Rimfire Cane Gun  No sights, brown tapered steel barrel, engraved blued receiver, smooth curved horn grip, removable brass plug which allows threaded blued steel shoulder stock to be attached. Metal finish shows some scratches, handling marks and wear. Grip shows some marks, scratches and wear.  Barrel Length: 31"  Serial: 18921 Canadian Antique, No PAL Required Can ship anywhere in Canada, Please see my other ads for rare and collectible, firearms and accessories.

categories:GunsSporting Goods

3762 impressions

181 views

Wow, here’s something that you don’t see everyday an Enfield-manufactured Lee-Enfield No. 1 Mk. III bolt-action shotgun. 25" barrel with bright bore chambered 410 Musket. Full-wood stock that comes with a detachable magazine! (Usually missing and single shot with a wooden block). Comes with period correct canvas sling. Factory open sights. Finish off your Enfield collection with this beautiful piece or add it in. This one is unique! Bayonet add $225* * I will except payments if needed Will Ship anywhere in Canada,

categories:GunsSporting Goods

80914 impressions

3151 views

Brand new Non-restricted Caliber.22 LR Action: Lever-Action (Take Down) Barrel Length: 12″ Capacity: 9 Rounds Feed System: Magazine Tube Trigger System: Single Stock: Wood Rear Sight: Short Buckhorn Twist Rate: 1:16 Material: Alloy Frame, Steel Barrel Net Weight: 2.00 lb Finish: Black Extraction: Auto 920.440 Made in Italy

categories:GunsSporting Goods

1053 impressions

89 views

This is an insert for a break open 12 gauge shotgun , side by side or over under, single shot. Make it a 410 in a flash just drop the insert in load a 410 shell and you are in business. Same with 20 gauge. GREAT CHRISTMAS present! Text please for info Buyer pays postage.

categories:GunsSporting Goods

62331 impressions

2784 views

Nice condition cooey model 82 Single shot .22lr Pick up in Sherwood Park Valid PAL required

categories:GunsSporting Goods

8717 impressions

311 views

B&T single point sling. ***New, Never Used***

categories:GunsSporting Goods

38917 impressions

1126 views

Turn-key, no-expense-spared .300 Remington Ultra Magnum setup built for serious long-range hunting and precision shooting. This package combines a proven Remington 700 platform with top-tier optics, premium ammunition, and rugged protection—ready to go straight to the range or field. Rifle Remington 700 – .300 RUM TriggerTech upgraded trigger (crisp, consistent break) AICS detachable magazine conversion Custom oversized bolt knob for enhanced manipulation Weaver scope base professionally installed A rock-solid, highly configurable platform with thoughtful upgrades already completed. Optics Leupold VX-5HD 2-10x42 CDS-ZL2 FireDot Duplex reticle CDS-ZL2 zero-lock elevation system Custom CDS dial cut for Barnes VOR-TX TTSX 180gr .300 RUM Exceptional glass clarity, lightweight design, and bomb-proof reliability This optic is perfectly matched to the rifle and ammunition for confident, repeatable long-range shots. Leupold Mark 4 30mm Medium Rings (Matte) Premium duty-grade mounting solution ensuring zero retention under recoil. Ammunition Barnes VOR-TX TTSX Boat Tail – .300 RUM 180gr 2.5 boxes included Outstanding terminal performance, deep penetration, and consistent accuracy—ideal for large game. Case Pelican® Vault V770 Single Rifle Case Heavy-duty protection for transport and storage with Pelican’s renowned durability. This is a carefully assembled, high-end rifle package—no guesswork, no missing components, and no compromises. Ideal for a hunter or precision shooter looking to step into a proven .300 RUM system without the wait or setup hassle. Serious inquiries only.

categories:GunsSporting Goods

1120 impressions

91 views

Brand New Non Restricted Action:Over/Under Barrel Length:28in Caliber:12GA-3″ Capacity:2rd Hand:Right Hand Model:202A Chokes: Beretta/Benelli® Mobil Choke Thread MC-5 (SK,IC,M,IM,F) Ext. Weight:7.3 lbs Length:45″ (1143 mm) Material:Aluminum Trigger System:Single-Selective Mechanical Reset Stock:Checkered Walnut MPN:930.244

categories:GunsSporting Goods

895 impressions

45 views

Very nice case pair of Antique Remington 41 calibre rim fire Derringers. They are both in very good condition function as designed with good springs and trigger release. The grips appear to be pearl or bone I’m unsure but they in very good condition. I would prefer to sell as a set, but would consider offers for a single one as well.

categories:GunsSporting Goods

3618 impressions

233 views

Brand new Non-restricted Caliber.22 LR Action: Lever-Action (Take Down) Barrel Length: 12″ Capacity: 9 Rounds Feed System: Magazine Tube Trigger System: Single Stock: Wood Rear Sight: Short Buckhorn Twist Rate: 1:16 Material: Alloy Frame, Steel Barrel Net Weight: 2.00 lb Finish: Black Extraction: Auto 920.440 Made in Italy

categories:GunsSporting Goods

837 impressions

76 views

Not many made and super hard to find. A few dings as shown in photos, works as it should, rifling is very good. 24" barrel. Shipping, if needed, at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:GunsSporting Goods

28403 impressions

1058 views

1) Browning Belgian SA-22 Dove Tail Flip Down Rear Sight  -  $165.00 2) Browning Belgium T-Bolt Firing Pin  -  $100 3) Browning Belgian Original Gold Bead Front Sight   -  $85.00 6) Browning Belgian T-Bolt - Receiver Sight  -  $185.00 8) Browning Belgian T-Bolt - Single Shot Adapter & Magazine Well Cover   -  $65.00 10) 6-48 Filler Screws (4) - Blue   $20.00 11) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ad

categories:GunsSporting Goods

69127 impressions

2543 views

Kids have grown so this little handy Rossi must go. Has a 410g barrel up to 3", And a 22lr barrel (missing rear site) Located in Benalto Prefer local pickup/meetup. Id like $250obo for the pkg. Thanks

categories:GunsSporting Goods

1276 impressions

135 views

Great little 22lr single shot bolt action, stock had been refinished. Located in Benalto Prefer local pickup/meet up. Asking $200 Thanks

categories:GunsSporting Goods

1079 impressions

74 views