3/4 " RINGS, THIS COMBINATION FITS PRE 83 MODEL 94 WINCHESTER TOP EJECT RIFLES WITH NO DRILLING I DON'T HAVE THE MOUNTING SCREWS VERY GOOD CONDITION

categories:Sporting GoodsGuns

4229 impressions

171 views

Brand new Pair of pins that replace receiver pins in order to attach side mounts on Type 81. Grade 8.8 strength steel. Made in USA

categories:Sporting GoodsGuns

2823 impressions

385 views

Brand new No-drill, Picatinny Side Mount for Type 81, manufactured by AK MasterMount USA. The mount was custom engineered and manufactured specifically for the Type 81 rifle and was extensively tested to ensure reliability, durability and zero-holding properties. The side mount installation is completely reversible and does not involve any drilling or permanent alterations to the rifle. Fits all Type 81 versions. This “NO-MOD” steel optic mounting side rail is the perfect accessory for the Type 81 in order to mount optics and accessories. It attaches to the hammer and trigger axis pin holes by the use of threaded axis pins, standard on Type 81 SR and optional as an Optics Ready "OR" model Type 81 SE. Threaded pins are optionally available for rifles without built-in receiver pins. No drilling, tapping, riveting, or gunsmithing needed. This steel side rail is low profile, rock-solid, and parallel to the barrel. The side rail dimensionally is the standard AK pattern, however was specifically designed for the AK MasterMount Optics Mounts for ideal positioning, cheek weld and ergonomics. Made from 1018 steel. The pins are custom manufactured in the USA of Grade 8.8 strength steel.

categories:Sporting GoodsGuns

10897 impressions

1114 views

Selling/trading a Winchester Model 69A .22 lr. Overall it's in very nice shape. Bluing is in very nice shape throughout, looks to have been redone at some point and was done very well. Some light fading towards the muzzle. Wood stock was also lightly oiled and in very nice shape  throughout with very few blemishes to note. Comes topped with a period correct Weaver 29S Special scope with side mount and will also come with a set of peep sights (not pictured). Will come with one detachable magazine. Overall a very nice collectible .22. Looking for $595 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

1541 impressions

122 views

Mint non-restricted canuck operator elite 12g. Only sent 20 rounds through it. Fun little gun. Has 4 chocked and extractor, removable picatiny mounted side saddle worth 150$ Looks new. Calibre: 12ga Barrel: 18.6″ Chrome Lined Chokes: F,M,C Rear Sight: Ghost Ring, Picatinny Top Rail Buttstock: Adjustable Chamber: 3″ Capacity: 5+1

categories:Sporting GoodsGuns

2197 impressions

175 views

Selling/trading a Savage Model 340B in .222 Remington. Overall it's in very nice shape. 24" barrel. Bluing has faded for the most part but does still retain some of its original colour. Wood stock shows light marks and dings but is in nice shape overall. Bore is very nice. Comes topped with a Jason 4x32mm scope with side mount and will come with one detachable magazine. Front sight still present, rear sight is not. Looking for $595 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

1972 impressions

140 views

I have a FDE Trijicon RMR with a 3.25MOA red dot type2 adjustable LED with lots of accessories.  It comes with a trijicon QD mount which is installed as shown in the pictures, an angle side mount, black cover, strike industry jellyfish cover, owner manuals, tool, battery and the original case for this red dot sight.  Selling all as a package and no trades.

categories:Sporting GoodsGuns

5126 impressions

207 views

Winchester model 94 3030 with side mount and bushnell banner scope. Selling for 1250 plus shipping. No trades.

categories:Sporting GoodsGuns

12449 impressions

777 views

M98 9.3x62 Husqvarna mauser. Blueing in decent shape Custom walnut stock with bedded action. Cheaper 3-9x40 weaver scope but it does and did do the job! Leupold rings. Bore is in excellent shape. Very shiny. Timney trigger. 24" barrel Asking $900 OBO M96 6.5x55 Husqvarna mauser. Worn bluing Excellent bore. 24" barrel Asking $400 OBO Two side mounts with screws for the M96 but I never used them Preferred the irons. Asking $150 each. Both rifles work very well its just time to clear the safe out a bit.

categories:Sporting GoodsGuns

13385 impressions

1600 views

Browning trombone pump action 22LR with side mount and Weaver B4 scope. Selling as a package for 650 plus shipping. No trades

categories:Sporting GoodsGuns

13079 impressions

965 views

Winchester model 94 3030 with side mount and tasco scope. Post 64. Selling for 1295 plus shipping. No trades.

categories:Sporting GoodsGuns

17386 impressions

1097 views

Ammunition . 7 boxes of never fired 300 H&H magnum, also RCDS dies. Hundreds of winchester 375 H&H Slugs in boxes of 50. also Hornady 375 solids. RCBS dies for 375, 7mm Rem, 280 Rem, 222 rem 338 Win. I have tons of goodies. E mail if interested. Also books by Jack O Connor, Capstick and others. Griffin & Howe side mount. $ 150.00

categories:Sporting GoodsGuns

16803 impressions

566 views

Savage 340B 222 for sale come with side mount and tasco pronghorn scope Also have a savage axis 25-06 for sale with rings no scope and a couple boxes of bullets

categories:Sporting GoodsGuns

11271 impressions

1087 views

Selling my 1955 Winchester 62A .22 short Gallery gun takedown pump action all matching VG condition *Made in 1955. Accept .22 short. *It is estimated that only 3% of 62/62a were .22 short cartridge, which were used as gallery gun. *Serial number: 331***, all matching, In very Good condition, No rust or pitting or crack *Most of gallery guns are mixed matched for the convenience of daily use, so all matching number ones are more scarce. *Very good shinning blue on receiver and barrel, with only a little used sign. *Loading port is triangle shaped. *Reliable, Great shooting fun pump action .22 Winchester rifle. * A nice collection of small winchester pump action rifle. * Comes with a very nice Vintage Bushnell 4X Banner .22 scope with classic side mount way. -------------------------------------------------------------------- *Price is firm *EMT or Cash Only *PAL is must, need verify *Only consider local face to face trade Thanks for understanding. -------------------------------------------------------------------- Prefer local pickup, shipping with extra cost. Text or email please. You could also check my other ads, there might be something you like. Thanks!

categories:Sporting GoodsGuns

45825 impressions

1410 views

Winchester 94AE's & Win. 94's Low baller's will be ignored. Reasonable offers or buy it now please. This is the last price reduction. Winchester 94AE New Old Stock Unfired, Mint condition in good old .30-30 cal, w 20 inch BBL hammer Safety. mini safe kiss hardly noticeable but otherwise near perfect condition. $2195.00 shipped in Canada. Winchester 94AE New Old Stock Unfired, Mint condition. in .30-30 cal w 20 inch BBL cross bolt safety, mini safe kiss hardly noticeable but otherwise near perfect condition. $2195.00 shipped in Canada. Winchester 94AE New Old Stock Unfired, Mint condition, in .30-30 cal w 20 inch BBL slide safety -, basically flawless gun. $2295.00 shipped in Canada Winchester 94AE Trapper, New Old Stock Unfired, Pristine condition, 16 inch BBL w Large Loop, Saddle Ring, Cross bolt safety, in classic .30-30 cal . This is a show room Collector gun. Did I mention it's Pristine. $2495.00 shipped in Canada, Winchester 94 Wrangler New Old Stock Unfired Pristine condition, fancy engraved Large Loop, Saddle ring, in .32 Special. Half hammer safety, This is a show room Collector gun w hang tags. Nostalgic Prestine 16 inch BBL, very hard to find. $2650.00 shipped in Canada, Winchester 94AE Trapper, Centennial, 16 inch BBL Like New condition, Saddle Ring, Cross bolt safety, Hammer extension, in .45 Long Colt, May have been shot but can't find any indication. Has a small safe bump on the tip of the lower butt plate. Except for this bump, the gun is like new. $2250.00 shipped in Canada, Winchester 94AE Trapper Saddle Ring, Excellent condition, 16 inch BBL, Cross Bolt Safety, Maybe 10 rounds fired. in .44 win mag. For being slightly used, and has a few safe bumps, it is a perfect gun for the hunter. $2100.00 shipped in Canada, Winchester 94 Very good condition , 20 inch BBL, Not more than 20 shots fired. .32 Special Has a like new scope side mount attached. Hammer safety, rifle strap installed, $1750.00 shipped in Canada, Trade interests: Swarovski Z6i variable scope 2-12x 50, 2.5-18x 50 etc. Benelli Argo wood-stock .308, Win 88 in .284, & .358, Winchester SXR2 in .308 , and Always looking for Sako Finnwolf VL63 rifles and mags for the VL63. .243 & .308 Thanks for looking.

categories:Sporting GoodsGuns

63603 impressions

3879 views

model 94 lever action 32 Winchester special calibre good condition with side mount scope

categories:Sporting GoodsGuns

9984 impressions

766 views

Selling my tm22 urban camo with 4x12 scope with a side mount red dot and 3 magazines one 25 round and 2 10 800 with accessories 500 with accessories Non restricted Barely used went thru around 100 rounds dumps Really nice

categories:Sporting GoodsGuns

3153 impressions

1116 views

PLEASE READ DESCRIPTION! unable to post all photos so see info below. A large variety of rings for sale. Prefer to sell larger bulk packs. Shipping is extra. Some smaller orders can be shipped cheap via regular letter mail. Prices do not include shipping. See my other post for a list of bases available. MILLET Nickel 1 inch turn in low $30 Nickel 1 inch turn in medium $30 Nickel 1 inch turn in high $30 Black matte 1 inch low $30 Black matte 1 inch medium $30 Black matte 1 inch high $30 Black matte 1 inch extension rings medium $50 Black matte 30mm low $35 Black matte 30mm high $35 Ruger M77 superhawk Nickel 30mm rings $50 Ruger 77/22, No.1, No.3, 96/44, Ranch Nickel 30mm mediums $50 Tikka angle loc 30mm medium Black matte $40 Sako angle loc 30mm mediumBlack matte $40 SAKO angle loc 1 inch high $40 WEAVER SIDE MOUNT 1" LONG BRACKET & RINGS HIGH BLACK, ITEM#49340 $50 Weaver grand slam medium 1 inch turn in rings $30 Medium silver 1 inch high quad lock extension rings $25 Medium silver 1 inch rings $30 BROWNING/TALLEY Browning AB3 scope mounts 1 inch, medium height $40 Abolt mountain TI Scope system $30 LEUPOLD STD 1 inch low gun metal grey $25 Rifleman 1 inch high silver $25 Leupold sako 1 inch rings and base silver mediums $100 DURASIGHT integral mount for CVA, traditions, winchester in lines. And t/c omega, triumph $25 SAKO Optilock silver rings new in pkg $100 optilock silver 1 inch low rings $100 Optilock silver bases $80, Optilocks Black 1 inch $70 Optilocks Black 1 inch extension base $90 Vintage sako 1 Inch see through rings SOLD

categories:Sporting GoodsGuns

68732 impressions

4308 views

Side rail mount for a type 81. Picatinny. Like new. Never used. Can deliver to Lethbridge and area. Email for photo.

categories:Sporting GoodsGuns

5036 impressions

305 views

This is a really nice excellent condition 22 rifle. Made sometime between 1947-49. So pretty rare. Tube feed bolt action that can hold 20 rounds of long rifle! Stock has been refinished. Majority of the bluing is still there. Comes with a side scope mount that is the weaver base. This rifle is built like a tank and super accurate with that peep sight setup. Just in time for gopher season! Would consider a trade for a lever or pump action 22. Prefer local sale $550 obo

categories:Sporting GoodsGuns

16761 impressions

1467 views

Brand new Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g. The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself. It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA. Dual-Axis Locking AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis. The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis. These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability. Low Axis Over Bore The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed. The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained. Built Rugged As the AK Itself The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics. Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking. No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release. Accessory Side Rail Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories. Compatibility The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder. Greater Optics Versatility. Superior Finish. A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base. The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.

categories:Sporting GoodsGuns

6263 impressions

614 views