Here is a U.S. model 1917 Trench Knife made by American Cutlery Company displayed with a U.S. model 1917 Helmet. This item still retains much of its original finish. The grips have a few minor dings with no cracks. The 9” triangle blade has one noticeable ding that would be consistent with a defensive block and one small area of pitting on two sides of the blade. The First World War brought along many advancements in firearms and armour but with that being said often the taking of trenches involved brutal hand to hand combat. Very often soldiers would find the trench battle too tight of quarters to use their rifles and would switch to knives, clubs, shovels and anything else that would give them an edge in hand to hand combat. Buyer must be 18 or older and able to prove it. Shipping is available at buyers expense.

categories:Sporting GoodsCamping and Survival Gear

10490 impressions

1156 views

This is a Rare Antique Remington Early Production Type I, A.K.A. The Double Derringer. Remington produced around 150000 model 95’s between 1866 and 1935. There were only around 1600 produced before the addition of an extractor. Making this one the hardest to find for collectors. This type is marked “E.Remington & Sons, Ilion, N.Y.” on one side of the barrel rib and “Elliot’s Patent Dec. 12, 1865” on the other. Later models would see the addition of an extractor and the barrel address moved to the top rib. This has a 3” barrel, is chambered in .41 rimfire and has a spur trigger. There are a a few light handling dings and almost no original finish left. The grips are in fine condition. Mechanically it is still very strong with the action working and cycling as it should. The hinges are intact. There is a slight play in the lock up which would be a fraction of a millimeter. These were carried by many people in the Wild West as they were easily concealed. Wild Bill Hickok is said to have carried a pair of these at times. This would make a great addition to a Remington collection and could be the centre piece to any collection. this is an antique so no PAL is required for purchase. Buyer must be 18 and able to prove it. Shipping is available at buyers expense. All used firearms should be inspected prior to any form of use. Short term layaway options are available.

categories:Sporting GoodsGuns

34915 impressions

2034 views

Good gun with no issues at all haven't used it as much as I am left handed and unable to get use to the mag release. Semi and full auto modes Comes with 3 Mags all green gas no leaks, shipping available at buyers expense. Price is negotiable to reasonable offers.

categories:Sporting GoodsPaintball and Airsoft

4277 impressions

616 views

Just in time for Christmas This pistol is stock, an SRC TTI 2011 Kikimora, modelled after the pistol used in the John Wick movies, with a full matte black finish instead of a black and rose gold. The magazine is modified to take a high capacity AR15 magazine and a high pressure paintball gas tank. This leads to it having a capacity of around 600 rounds a mag instead of 30 rounds a mag and makes it a more reliable primary. The modifications are not reversible, but they are done with top of the line parts and there is no reason to try to undo them. If you want a regular pistol magazine look for a novritsch SSP1/SSP5 magazine, but will set you back around 30£. It is very reliable, I sent around 1000 rounds though it with no issues, it has not been used in a field and has only been used for target practice at home. Very reliable, realistic and beautiful piece that satisfied a gun nerd like me. It is in perfect condition aside from a few scratches on the slide that come with regular use and should last a long time as long as it is not mistreated. RETAIL PRICES OF EVERYTHING: Pistol: $250 Magazine and mods: $150 (the 3D printed part was $110) Protective gear: $50 Gas tank: $90 Regulator: $130 Hose: $90 BBs: $30 Gun Case: $40 Speed loader: $20 Combined new price for everything: $850 (Plus tax)

categories:Sporting GoodsPaintball and Airsoft

4541 impressions

477 views

Savage model 11 243 Win, As New, only used a handfull of times for coyotes, gun only.

categories:Sporting GoodsGuns

42175 impressions

4396 views

Currently have glock, S&W MP, and Ruger pcc9/sr9's available. More are available by demand, including rifle base plates. Base plates for airsoft platforms also available. Those are +0 base plates that could be a reloading aid, that looks cool or extends a compact magazine for use in full-size guns.

categories:Sporting GoodsGuns

69103 impressions

2699 views

Chinese sling (two variants) $40 shipped Oiler $10 (still in package, photo of my personal one) Cleaning kit $15 shipped Amber shellac touchup: this service will help you restore flaking SKS/mosin/svt or any gun stock that uses shellac shipping extra

categories:Sporting GoodsGuns

84119 impressions

3470 views

Match 64 action, 23 inch heavy barrel, walnut stock, 7 pounds (3.2kg), 5 and 10 shot clip, Nikon 3x9 BDC scope, 1000 rounds of CCI Target .22. Purchased new for Silhouette shooting which I didn't pursue. Very accurate and nicely balanced rifle. Used very little over the last 5 years. Has some gun safe bumps and bruises. Orange target group out of the box, last black target Feb 12, 2026. PAL required. Please text and I will call back.

categories:Sporting GoodsGuns

559 impressions

88 views

Caldwell® Matrix Shooting Rest Hardly used, like new. • U-channel frame quickly adjusts up to 4-1/2" • Open center channel provides plenty of clearance • Spring-loaded tension mechanism and height-adjustment Ultra-rigid U-channel frame quickly adjusts up to 4-1/2" in length to stabilize any gun, from a handgun to an AR-15. Open center channel provides plenty of clearance for high-capacity detachable magazines. Removable lid on the convenient storage area in the front of the base adds additional clearance when detached and doubles as a rubberized rear support surface when firing handguns. The front elevation system has a spring-loaded tension mechanism and a height-adjustment knob for precise one-handed elevation adjustments. Remove the rear portion of the frame to convert it into a compact front rest. Dimensions: 16.5 x 42 x 49.5cm (6-1/2" H x 16-1/2" W x 19-1/2" D). Front cradle height: 7-1/2" to 10-1/2". Weight: 5 lbs.

categories:Sporting GoodsGuns

473 impressions

131 views

Selling my ATRS precision build 7 PRC M24 contour barrel, spiral fluted, krg bravo chassis. Lots went into this build and it’s incredibly accurate. Around 100 rounds out of it. I wanted to shoot it more but It spent more time in my save then getting used. Have videos of me shooting out to 800 yards and it’s capable of much more. I’m pretty firm on the price as you can’t have too many guns and I’d rather keep it than take a loss on it.

categories:Sporting GoodsGuns

2410 impressions

278 views

I used it on about 5 hunts, I decided to go semi auto. Gun is in good shape, except a scratch on the barrel.

categories:Sporting GoodsGuns

1437 impressions

346 views

*Prior to sale, a valid PAL (gun license) will be required. Please send a picture of your PAL. Selling my Derya TM 22 lever action to clear up some space in my safe. Selling for $600. Barely used; I have put about 200 rounds through it. Will meet in the Calgary area; local sale only.

categories:Sporting GoodsGuns

3981 impressions

371 views

Remington model 700 7mm08 Detachable magazine Leupold Rifleman3-9x40 scope 22” barrel Wood shows some use but gun is in great shape, shoots excellent 3/4 moa Also have a spare detachable magazine Can include 130gr load details if wanted.

categories:Sporting GoodsGuns

12712 impressions

1371 views

11-87 12 gauge camo 3 inch. Please read the full ad before contacting me. This is a bit of a project gun. I bought it new in 2008 and shot it casually over the years with almost nothing but lead trap loads. Recently it developed a problem cycling the action after the shot. It will always fire. However, sometimes it will cycle the action, other times the action cycles half way and stops, and still other times it will not cycle at all. Sometimes it picks up a new shell and sometimes it won't. Sometimes is locks up and can only be freed by popping the barrel and the action bars out and re assembling it. I don't have the time or interest to look into it . It might be a simple fix who knows. I already bought a gun to replace it. This isI a package deal only. This includes the gun as it came from the factory, with 1 modified choke tube, a wrench, 27(?) Inch barrel. It will also come with a Remington 20 inch fully rifled 12 gauge barrel that has open sights. This barrel has 11 slugs through it and was used on 1 trip to shoot a moose. I will ship this gun on the buyers dime but I would much prefer a local sale so that the buyer can actually see the problems themselves. Text Jeff at 403 390 2570 for the fastest response. Located in Airdrie

categories:Sporting GoodsGuns

7541 impressions

935 views

Brand new 5-20x50mm 30mm Tube Second Focal Plane Trijicon produces battle-proven aiming systems that deliver rapid target acquisition and increased hit potential under any lighting conditions. Their self-luminous aiming systems empower you to execute any shot with complete confidence in bright light, low light or no light at all. With a stunning magnification range, a 30mm tube, and an impressive objective, the AccuPoint 5-20x50 looks mighty serious while delivering the power needed to get on target across long distances. This fine optic is also graced with a very handy third turret that re-focuses the reticle to eliminate parallax error. Sighting during twilight conditions is enhanced considerably by the remarkable 50mm objective, while the dual tritium/fiber optic reticle illumination system provides a vibrant aiming point under any conditions. A mounting base and rings are used to attach a riflescope to a firearm. A comfortable sight picture is contingent upon the height of the rings. A comfortable cheek-weld is the result of properly positioning the scope over the receiver. Mounting the scope close to the receiver is preferable, yet scopes with larger objectives need higher rings so the front bell can clear the barrel. It should be noted that in many mounting applications, a professional gunsmith's skills will be needed for proper installation. 30mm Main-Tube 6061-T6 Aluminum main-tube is waterproof to 10' Mil-Spec Finish Type III hard anodized per MIL-A-8625 , Class 2 dull & non reflective Multi-Layer Coated Lenses Provide superior clarity, zero distortion, flare/glare reduction Side-Focus Parallax Correction Third turret on saddle actuates parallax correction for long-range accuracy Fiber Optics and Tritium Illumination Proprietary battery-free technology provides a vivid aiming point without the need for failure-prone batteries Dual-Illuminated Standard Crosshair w/Green Dot Reticle A series of dots upon the cross hairs gives the shooter the ability to judge bullet drop and the proper hold over for accurate long range shot placement. Trijicon's proprietary tritium/fiber-optic illumination technology places a brilliant green dot at the intersection of the stadia. This scope has the reticle positioned in the rear or second focal plane so it will not magnify when the scope is zoomed to high power. This leaves the sight picture unobstructed for a clear view at all times. Reticle: Standard Crosshair w/Green Dot Main-Tube Diameter: 30mm Linear Field of View: 5x: 19.1' @ 100 yd / 6.3 m @ 100 m 20x: 5.1' @ 100 yd / 1.7 m @ 100 mExit Pupil Diameter5x: 10mm 20x: 2.5mmEye Relief5x: 3.8" / 96.5mm 20x: 4.1" / 104 mm Impact Point Correction: 1/4 MOA Maximum Windage/Elevation Adjustment Windage: 34 MOA Elevation: 34 MOA Weatherproofing: Waterproof to 10.0' Length: 13.6"/345mm w/o sunshade Weight: 29.4 oz / 0.83 kg w/ sunshade Coming with: Weatherproof Logo Sticker 3.0" Sunshade Pair of Lens Caps Limited Lifetime Warranty (15 Year Warranty on Tritium)

categories:Sporting GoodsGuns

8601 impressions

609 views

Brand new The Magpul MOE M-LOK Forend is a drop-in replacement for the Mossberg 590/590A1 series shotguns, adding modularity, comfort, and customizability to the mossberg platform. It features an extended length and front/rear hand stops for improved firearm control and manipulation and does not overlap the receiver for side saddle compatibility. The MOE M-LOK Forend is compatible with M-LOK rails, accessories, and mounts. Not compatible with the optional Mossberg heatshield. Removal is required before use. Not compatible with the 590M shotgun.

categories:Sporting GoodsGuns

5714 impressions

461 views

Brand new The SGA Stock is an ambidextrous, user-configurable buttstock designed to add much-needed adjustability to the tried and true Remington 870 12ga shotgun. Featuring a spacer system for length of pull adjustment, improved grip ergonomics, recoil-reducing butt-pad, optional cheek risers for use with optics/raised sights, and other accessories, the SGA 870 brings Magpul design and engineering to another classic American firearm. Made in USA

categories:Sporting GoodsGuns

6038 impressions

504 views

Brand new SureFire SFMB muzzle brake suppressor adapters greatly reduce both recoil impulse and muzzle rise so that your weapon tracks straight back, keeping you on target for faster shot-to-shot recovery. The proprietary Impulse Diffusion design minimizes side blast and rear-directed concussion effects. Precision machined from U.S. mill-certified heat-treated stainless steel bar stock and DLC-coated for extreme durability, they are available for a variety of weapon calibers and muzzle thread specs, and every SFMB serves as a rock-solid mounting adapter for SureFire’s combat-proven SOCOM Series Fast-Attach® suppressors. The SFMB design incorporates multiple bearing surfaces to ensure superior suppressor alignment. Blind pilot holes at the 3 o’ clock and 9 o’clock positions enable fine-tuning of recoil characteristics for individual shooting styles or ammunition characteristics. Blind pilot holes at the 6 o’clock position enable indexing the adapter at bottom dead center. All that’s required is a basic hand drill and appropriate drill bits. Offset porting delivers greatly reduced recoil impulse and muzzle rise, so the weapon tracks straight back to keep you on target for faster shot-to-shot recovery Multiple bearing surfaces for superior suppressor alignment Precision machined from U.S. mill-certified heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Inspected for all critical dimensions including concentricity and alignment Pilot holes for tuning of muzzle brake and to pin-and-weld to rifle barrel as needed DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Serves as rock-solid mounting adapter for SureFire SOCOM Series sound suppressors Labyrinth seals prevent carbon buildup on suppressor lock ring indexing system Model Number: SFMB-762-M18x1.5 Caliber: .308(7.62) Thread Pitch: M18X1.5

categories:Sporting GoodsGuns

8414 impressions

574 views

Brand new Patent-pending design provides more than 98% flash elimination; virtually eliminates muzzle rise Serves as a rock-solid mounting adapter for SureFire SOCOM suppressors Multiple bearing surfaces provide suppressor alignment and prevent tines from ringing inside suppressor Port direction may be timed to optimize for right hand, left hand or neutral Precision machined from U.S. mill-certified, heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Individually inspected for all critical dimensions, including concentricity and alignment DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Installation requires no permanent modifications to weapon Durable construction delivers a long service life Color: Black Model No.: WARCOMP-556-M15x1 Caliber: 5.56x45mm NATO Finish: Matte black DLC coating Fabric/Material: US mill-certified heat-treated stainless steel Threads per Inch: M15x1 Gun Model: Heckler & Koch G36/HK MR223 Length: 3.6 in Weight: 3.9 oz Included Accessories: Suppressor Adapter

categories:Sporting GoodsGuns

6339 impressions

617 views

Brand new Magnification: 3x Fixed Eye Relief: 2.2" Field of View: 7.3° Water Resistant: Submersible to 33 ft (10 m) depth Sealing: Fog resistant internal optics Length: 3.9" Weight: 11.9 oz 1x to 3x Magnification - The ability to transition between the two distances almost instantly and still maintain weapon accuracy. Battle Tested - EOTECH is dedicated to providing rugged, reliable and innovative products that offer a true advantage to all who use them. Adaptable - The EOTECH magnifiers are designed to work for both left and right-handed shooters and all come equipped with a locking, adjustable quick detach lever system allowing for immediate attachment or removal.

categories:Sporting GoodsGuns

5163 impressions

481 views

Brand new The Enhanced Trigger Guard is a black anodized aluminum drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The Enhanced Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. All mounting hardware included. Made in USA

categories:Sporting GoodsGuns

2260 impressions

375 views