Have a like new condition Browning 725 Field over/under 12 ga shotgun. Has vented rib and comes with external chokes. This is a beautiful shotgun and has been well taken care of. It’s comes with a brand new Browning wood hard case with velvet inside paid 450$ for it. It also has a very nice canvas padded case. Will also include a case of 12 ga target loads. Asking 2800$. Will consider a REASONABLE OFFER.

categories:GunsSporting Goods

3542 impressions

228 views

Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g

categories:GunsSporting Goods

78083 impressions

2343 views

Savage Elite Precision 300 win mag All accessories are not included No trade Description The 110 Elite Precision is the pinnacle of the Savage’s 110 designs. They’ve begun with the time tested Model 110 action and then rethought every aspect of the rifle. The overhaul includes all of the upgrades demanding shooters make to their long range tack drivers. The 110 Elite Precision has an Adjustable Core Competition chassis from Modular Driven Technologies (MDT). From its full length ARCA rail to its titanium nitride coatings, this is a rifle built for a lifetime of Elite Precision. FEATURES * Savage factory blueprinted action * MDT ACC aluminum chassis with fully adjustable stock * ARCA Rail along the entire length of the chassis * Stainless steel, flash nitride target receiver * Titanium Nitride bolt body * 1.5 – 4 lb user adjustable AccuTrigger * Self timing taper aligned muzzlebrake (Short Action Calibers Only) * MDT Vertical Grip and AICS magazine * Modified Palma contour barrel * 1-Piece 20MOA Rail Action: Bolt Ejection Port: Right Barrel Color: Natural Barrel Finish: Matte Barrel Length (in)/(cm): 30 / 76.200 Barrel Material: Stainless Steel Caliber: 300 WIN MAG Magazine Quantity: 1 Magazine Capacity: 5 Hand: Right Length of Pull (in)/(cm): 14-15.5 / 35.560 Magazine: Detachable Box Magazine Overall Length (in)/(cm): 49.75-50.7 / 126.365 Rate of Twist (in): 1 in 10 Receiver Color: Black Receiver Finish: Matte Receiver Material: Stainless Steel Type: Centerfire Stock Color: Grey Stock Finish: CeraKote Stock Type: Chassis Weight (lb)/(kg): 14.95 / 6.78

categories:GunsSporting Goods

84054 impressions

4799 views

Great little rifle made in Germany Diana R-22 22LR, Carbon fiber wrapped barrel, super accurate, less than 200 rounds shot, all the rounds were shot CCI mini mag 36gr. Diana R-22 features an ergonomic all-weather polymer stock in an attractive OD Green. The hammered precision carbon fiber wrapped barrel comes with a 1/2” UNF muzzle thread with countersunk muzzle. The dry-standing direct trigger offers an adjustable trigger weight of approx. 2-2.9 lb. Picatinny rails on receiver and forend allow for sturdy optics and bipod mounting. With a proven heritage of precision and accuracy the new Diana R-22 rimfire rifle sets the new standard in performance rimfire target shooting. Caliber: .22LR Capacity: 10 Rounds Action: Bolt Action Stock: Fixed, Polymer, OD Green Sights: Open Barrel: 18.5" Carbon Fiber Trigger Weight: 4 lbs. Overall Length: 37.5" Weight: 6.1 lbs. *** Notice, in order to purchase this rimfire rifle must comply with the law, I am required by law to see possession of legal firearm license and verify by RCMP website***

categories:GunsSporting Goods

13052 impressions

601 views

Testing grounds on my Browning Citori 825 Sporting Adjustable Comb 12 gauge 30" 3" DS In pristine condition Bought brand new about 4 months ago Applied greasing and fired only one box (25 shots) of Target loads No defects whatsoever Extras include the fitted case Comes with the box and all accessories it came with Interested in trading for a 30" Beretta 694 in immaculate condition Will consider other trades but they will have to have cash included Feel free to ask for more photos. Can ship for extra

categories:GunsSporting Goods

10991 impressions

392 views

Brand new Non-restricted Caliber: .22LR Rate of Twist: 1:16" Magazine Capacity: 5 Magazine Type: Detachable Stock: Sculpted Walnut Sights: Integral 11mm Dovetail Barrel: 20.5″ Cold Hammer Forged, Varmint Match Target, Threaded Trigger: Fully Adjustable Safety: Two-Position, Push-To-Fire Length: 38.25″ Weight: 7.23 lbs Made in CZ

categories:GunsSporting Goods

9735 impressions

563 views

Brand new Non-restricted Lever Action Caliber: .22 LR Capacity: 16+1 Barrel Length:  20″ Barrel Type:  Octagon Blued Steel Rate of Twist:  1:16 Overall Length:  38.5″ Weight:  6.75 lbs. Receiver Finish:  Nickel Plated Rear Sight:  Fully Adj. Semi-Buckhorn w/ Diamond Insert Front Sight:  Brass Bead Scopeability:  Drilled and Tapped Scope Mount Type:  GB-CSM Stock Material:  American Walnut Buttplate/Pad:  Brass Length of Pull:  14″ Safety:  1/4 Cock Best Uses:  Target/Hunting/Collector Embellishments/Extras:  Receiver Engraving with 24K Gold Plating. Engraved/painted stock and forearm Made in USA

categories:GunsSporting Goods

11600 impressions

466 views

Brand new Non-restricted Lever Action Caliber: .22 LR Capacity: 16+1 Barrel Length:  20″ Barrel Type:  Octagon Blued Steel Rate of Twist:  1:16 Overall Length:  38.5″ Weight:  6.75 lbs. Receiver Finish:  Nickel Plated Rear Sight:  Fully Adj. Semi-Buckhorn w/ Diamond Insert Front Sight:  Brass Bead Scopeability:  Drilled and Tapped Scope Mount Type:  GB-CSM Stock Material:  American Walnut Buttplate/Pad:  Brass Length of Pull:  14″ Safety:  1/4 Cock Best Uses:  Target/Hunting/Collector Embellishments/Extras:  Receiver Engraving with 24K Gold Plating. Engraved/painted stock and forearm Made in USA

categories:GunsSporting Goods

10557 impressions

431 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:GunsSporting Goods

12601 impressions

418 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

10842 impressions

236 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

19898 impressions

731 views

Howdy Townpost. I have here a nicely restored Cooey Model 82. I got the gun as an oil stained and sporterized target .22. It's had the stock nicely refinished in a satin urethane finish done in the fashion to mimic an old oil finished stock. The stock has a pretty nice grain pattern on the underside of it (pictured). The bore is excellent. The stock had a chunk out of it to accomodate a Lyman peep-sight and the receiver was drilled and tapped for it as well. That has all been repaired (pictured) and is hardly noticeable now. There was a hairline crack near the middle barrel band that was filled too. It probably wasn't necessary to fill especially on a .22 , but hey she's been filled. It has all the C-broad arrow markings present. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:GunsSporting Goods

16748 impressions

636 views

Never been used on the field but has been used for target practice Shipping is available Email or TXT only please, phone calls will be ignored as I get alot of spam calls.

categories:Paintball and AirsoftSporting Goods

8850 impressions

760 views

one pair of beatifully striated LEFT hand target grips to fit beretta 92 and clones and 1 set of mahogony and 1set of walnut grips to fit 1911a's and clones $50 for lefthand [cost me $85us ] and $20 each for the 1911 's all have not been used removed when sold NO texts 825 760 4289

categories:GunsSporting Goods

18066 impressions

401 views

Brand new fletched dozens, uncut 31” arrows, comes without inserts. 300 Spine. 6 dozen available. $100/dozen. These are the same specs and arrows as the VAP Sport, just older packaging. MICRO DIAMETER ARROW – 100% CARBON FIBER CONSTRUCTION MICRO DIAMETER FOR MAXIMUM SPEED & PENETRATION WITH LESS WIND DEFLECTION EVERY ARROW DIGITALLY SPINE ALIGNED FOR INCREASED ACCURACY AND SHOT TO SHOT CONSISTENCY EACH DOZEN WEIGHT MATCHED TO +-0.5 GRAINS FOR PRECISE SHOT CONSISTENCY AND TIGHTER GROUPING ADVANCED NANO CERAMIC ARROW COATING IMPROVES PENETRATION AND ALLOWS FOR EASY REMOVAL FROM TARGETS HAND FLETCHED FOR OPTIMUM VANE ADHESION AND ALIGNMENT

categories:BowsSporting Goods

463 impressions

93 views

Brand new fletched dozens, uncut 31” arrows, comes with inserts. All are 400 Spine. $150/box -MICRO DIAMETER ARROW – 100% CARBON FIBER CONSTRUCTION MICRO DIAMETER FOR MAXIMUM SPEED & PENETRATION WITH LESS WIND DEFLECTION -EVERY ARROW DIGITALLY SPINE ALIGNED FOR INCREASED ACCURACY AND SHOT TO SHOT CONSISTENCY -EACH DOZEN WEIGHT MATCHED TO +-0.5 GRAINS FOR PRECISE SHOT CONSISTENCY AND TIGHTER GROUPING -ADVANCED NANO CERAMIC ARROW COATING IMPROVES PENETRATION AND ALLOWS FOR EASY REMOVAL FROM TARGETS -HAND FLETCHED FOR OPTIMUM VANE ADHESION AND ALIGNMENT

categories:BowsSporting Goods

379 impressions

103 views

Silhouette targets of 19X13 inches in B/W thick paper. Cheaper than buy it at the range Discount for 50 targets and up. One representing a bad guy and one with a zombie 

categories:Sporting Goods

235 impressions

61 views

Selling my Ranger Silah. Got it second hand from Cabelas and had fun shooting clays and targets. Maybe put 100 shells through it, just don't have the time to get out and shoot. Pick up in the SW near Haysboro. Can meet at the Shooting Center or my residence. Must had a valid pal and provide, license number, date of birth, and email address as per the RCMP. (https://rcmp.ca/en/firearms/buying-and-selling-transferring-firearms) Doesn't include the trigger lock so please bring one of your own for transportation.

categories:GunsSporting Goods

1626 impressions

596 views

Selling a full archery setup, perfectly tuned, maintained, and ready to hunt or target shoot. Everything works flawlessly, high-end gear throughout. Bow: Bowtech 82nd Airborne (70# @ 28”) – IBO ~350 fps Right Handed New GAS strings installed last year, professionally tuned and peep installed. Accessories: CBE Trek 2V sight QAD MXT drop-away rest Tru Ball Stinger XT release Plano hard case Morrell Big High Roller target Bowtech 12" Center Mass stabilizer with 10° angled quick mount Tight-Spot quiver mounted Arrows & Components: 6 - Vector ZMR 325 spine arrows – ultra rare, no longer in production/business 6 - Victory VAP Gamer 300 spine arrows – podium titanium inserts, Sabre Mini vanes, 125gr Podium field points Miscellaneous practice/small game arrows DCA Sabre Mini vanes (green, pack of 82/100 (used on vaps)) Arizona EZ Fletch jig max helical left + fletching tools (prep pen, hot glue, superglue, etc.) G5 Arrow Truing Tool Broadheads: Iron Will single bevels: 3 × 100 grain (right twist) in the Vector Arrows 3 × 125 grain (left twist) - For the VAP setup Condition & Extras: Professionally maintained, tuned, and inspected at Jimbows Extremely accurate, turnkey hunting and practice setup Price: $1300 FIRM Will NOT separate anything from package. If ad is up, it's available. Way too much to ship, so hopefully you're close! I can deliver within reason to meet up.

categories:BowsSporting Goods

3647 impressions

365 views

Up for sale is a lightly used Steambow archey kit, including the compact crossbow, target, and many accessories. Asking $250 for the lot. Pick up in Langdon. Cash for payment.

categories:BowsSporting Goods

1545 impressions

138 views

Brand new Tikka T1x, Right hand, 20" rifle has been modified to further increase the accuracy. Right hand, 19.5" barrel. Fully Ceracoted (barrel and action) Graphite Black, recessed target crown, match chamber (barrel removed and set back slightly, in order to re-chamber). Comes with 15 min Picatinny rail. Unfired before or after modifications!

categories:GunsSporting Goods

58208 impressions

3880 views