Currently have glock, S&W MP, and Ruger pcc9/sr9's available. More are available by demand, including rifle base plates. Base plates for airsoft platforms also available. Those are +0 base plates that could be a reloading aid, that looks cool or extends a compact magazine for use in full-size guns.

categories:GunsSporting Goods

63232 impressions

2591 views

Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g

categories:GunsSporting Goods

78081 impressions

2343 views

Here is a Canadian/British origin and the C broad arrow marking), and cross-referencing the images (including the faint stamping that reads “Z.L.&T. LTD 1940” along with the C broad arrow symbol), this is an original Canadian WWII Pattern 1937 (P37) web pistol holster. Features •  Khaki/tan heavy cotton canvas construction, typical of British/Commonwealth web gear from the era to save on leather due to wartime shortages. •  Flap closure with brass snap (often called a “lift-the-dot” fastener in some variants). •  Brass or metal belt hanger and loops on the back for attachment to P37 web belts or pistol belts. •  Angled design for right-side hip carry, with a reinforced muzzle end. •  Markings: “Z.L.&T. LTD 1940” refers to the manufacturer Zephyr Looms & Textiles Ltd. (Toronto, Canada), a known WWII contractor for Canadian military gear. The “C broad arrow” (often stylized as C↑ or C with an arrow inside) is the Canadian government property/acceptance mark, indicating it was issued for Canadian forces (part of the British Commonwealth system, where the broad arrow denotes ordnance property, and the “C” specifies Canada). This holster was designed primarily for revolvers like the Webley Mk IV .455 or Enfield No. 2 .38, which were standard for Canadian troops early in WWII. However, similar P37 holsters were also used or adapted for the Canadian-made Inglis Browning Hi-Power 9mm pistol (produced from 1944 onward). Original Canadian WWII P37 canvas holsters in good used condition (like this one, with intact hardware and no major tears) typically sell for $150–$350 on sites like eBay, GunsInternational, or militaria forums/auctions. Factors influencing price include: Rarity of the early 1940 date (pre-U.S. entry into the war, during the British Commonwealth’s initial buildup). Clear markings (the C broad arrow and manufacturer stamp add provenance). Condition: This appears solid but field-used, so more toward the $200–$300 range. Recent comparable sales include similar Z.L.&T. Ltd.-made holsters from 1943–1945 fetching $200–$300. Can ship anywhere in Canada Please see my other ads for collectable military accessories.

categories:GunsSporting Goods

4733 impressions

104 views

(50) RNDS, FOR USE IN SUB-MACHINE GUNS, IN ORIGINAL COLLECTIBLE BOX, SHOWS SOME WEAR. Can ship anywhere in Canada Please see other ads for where and collectable ammunition, firearms, and accessories.

categories:GunsSporting Goods

47996 impressions

830 views

This Shotgun stamped twice with US Flaming Bombs with letter P proof mark, possibly a training shotgun, serial number outside of estimated range of Riot guns. Brass bead, blued finish, round barrel. Two piece wood stocks, takedown model with checkered forearm and pistol grip, brown rubber recoil pad, also comes with M1 combat sling. Wear: Metal finish shows some scratches, handling marks and wear. Stocks show some marks, scratches and wear. Make:STEVENS US MILITARY Model: 620-A Caliber: 12 G X 2 3/4" | Choke(s): Fixed Cylinder Choke Bore(s): Excellent Can ship anywhere in Canada, Please see my other ads for rare and collectible, firearms and accessories.

categories:GunsSporting Goods

57072 impressions

1302 views

Here is an excellent condition Bruno factory made German VZ 24. This is a non- matching rifle however is an excellent condition stock and boar. Comes complete with cleaning rod and site hood cover as well as  2 sling option positions with  winter trigger guard.  The Germans occupied Czechoslovakia in 1938, and their control over factories in Brno, like the Zorojovka arms factory and textile mills (like the one where Schindler's list connection is), began then, with production continuing under German direction, especially for arms like the vz. 24 rifles and ZK-383 submachine guns, until the end of World War Il in 1945. Can ship anywhere is Canada Please my other ads for rare and collectable firearms and accessories,

categories:GunsSporting Goods

4296 impressions

154 views

Will BUY GUNS!!   Will buy singles, parts guns, accessories, or collections. Located in southern Alberta, but will travel if required Will pay fair prices! 403 818-0864

categories:GunsSporting Goods

3909 impressions

269 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

12395 impressions

436 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

10835 impressions

235 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

11602 impressions

666 views

Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

12317 impressions

375 views

Red Dot mount for Win 94 lever gun. This is the cleanest and easiest way to add a red dot to your rifle. If you have the AE version use two bolts to secure via the front scope mount holes. If not, any competent gunsmith can drill/ tap two  holes easily.  fits RMR footprint,  (2) available,  $100 shipped.  *please see my other ads*  

categories:GunsSporting Goods

8005 impressions

201 views

Howdy there Townpost! I have another custom 12 Gauge delight for you to take a gander at! This is a custom-made one of a kind Ithaca M37 Featherlite put together by my gunsmith for me. As pictured, the overall length is 30 inches long and has a barrel length of 18.5 inches. It weighs 5 lbs, 7oz unloaded, so Featherlight is definitely even more apt than this when this thing was full length. Some fairly extensive work was done. Most notably the barrel and stock were cut down and reshaped the muzzle crown was nicely dressed with file work and reblued and it's nice, smooth and square to the barrel. The original red Ithaca fibreoptic front bead site was reinstalled at the new muzzle. The stock bolt with shortened and a nice decorative cast pewter medallion was added to the butt of the stock to cover up the bolt hole and add very nice piece of decorative flair. And sling swivels were added so this can carried around on sling. The action is very smooth the action release locks up properly, and the spring on it is in good condition. And it slam fires without a problem. What is slam fire you may ask? It means you can hold down the trigger and work the action and every time you close the action with the trigger held down the gun will fire. The gun will fire as fast as you can work the action. So needless to say it's pretty fun to shoot.  This would make an excellent hiking, camping or backpacking shotgun for predator defense in my opinion. Or if she just want a sawed-off shotgun that you can slam fire this is the gun for you. Ithaca started making short versions of the M37 for law enforcement called the Stakeout I believe those were mostly in 20 gauge and they came out sometime in the 70s or '80s. Inland Manufacturing to this day makes something similar to this called the Stakeout II for the US market with an MSRP of $750US. Short versions of the M37 have appeared in a lot of media, probably most notably is the shotgun in the movie Aliens where it's used for "close encounters". There's a well documented cut down Ithaca Featherweight by a Navy SEAL who put a duckbill spreader on it, put a magazine tube extension so that it held 8 and cut the stock off in much the fashion that this one is. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. It's very short when broken down, and light so it should be cheap to ship. PAL is a must!

categories:GunsSporting Goods

2339 impressions

225 views

Using the same principle as electroplating, this system uses a low voltage and chemicals to remove the lead or copper from your barrel and plate it on the sacrificial anode (stainless steel rod) that you insert in the barrel. It did work in my 243 win 1885 but I just don't shoot enough to make it worthwhile. I think if you had some heavily fouled barrels, maybe a cache of military surplus for example this would be alot less work that scrubbing forever. Comes with the controller, the chemicals, the stainless steel rod and the electrochemical isolation doo-dads. Not sure about shipping as the rods are 30" long and there are two chemicals. One for Copper and one for Lead. Cheers, Cody

categories:GunsSporting Goods

2625 impressions

163 views

Clymer 45 ACP.     No Go.            $65 Forster 223 rem.  Field                  $65 I bought these to simply make sure the headspace had not grown too big. I did not get the 'go' gauges as that defines the minimum headspace and I was looking out for headspace growing with usage of the gun. Primarily for when I was searching for guns to purchase.  The field gauges indicate maximum safe headspace in used guns, i.e. slightly larger than the SAAMI as manufactured. If a 'Field' gauge will chamber, don't shoot the gun.  I'm not sure if I ever actually used these. They are in as new condition. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

4885 impressions

224 views

Moving to a condo, dont have room for this excellent oak gun cabinet. I made it by converting my mom's China cabinet. Room for 8 long guns, and all kinds of other stuff. It has a light to light up the long guns, drawers, and plenty of storage in the bottom. If you have the room, this is a kick ass unit!

categories:GunsSporting Goods

1536 impressions

222 views

Mossberg 12 ga. 2 3/4 to 3 pump c/w case Mossberg 22 single shot Both guns are in excellent condition and used very little. Sell as a pkg. for $ 500 or separate $400 for shot gun and $100 for 22

categories:GunsSporting Goods

2767 impressions

448 views

30.06 bolt action scope sling case and 1box ammunition

categories:GunsSporting Goods

2636 impressions

601 views

I run three Lee 4-Hole Turret Presses for case prep and general reloading. To keep my workspace organized, my disabled daughter and I printed these wall-mounted turret racks — they turned out great, so we printed extras to share. They’re perfect for light-duty use and free up valuable bench space, keeping your turrets neatly displayed and easy to swap out. Available in red, black, and blue. Printed from durable PLA filament. Designed for the Lee 4-Hole Turret Press. 👉 $10 each or 3 for $25 — Veteran printed 🇨🇦 👉 Help support a Canadian Army veteran and his disabled daughter 👉 Check out my other ads: https://townpost.ca/user/younggunscanada

categories:GunsSporting Goods

2373 impressions

290 views

I reload 9 mm, .45 ACP, and .40 S&W on my Lee Pro 1000 together with my disabled daughter. To free up bench space in our little workshop, we printed these wall-mounted turret racks — and they worked beautifully. Printed with PLA, they’re perfect for light-duty use and keeping your turrets organized and out of the way, so your press area stays clear and efficient. Available in Black, Blue, and Red. $10 each or 3 for $25 👉 Help support a Canadian Army veteran and his disabled daughter. 👉 Check out my other ads: https://townpost.ca/user/younggunscanada

categories:GunsSporting Goods

2099 impressions

223 views

I printed this wall rack system together with my disabled daughter to get our magazine collection properly organized. It worked so well we printed extras to share. 3 sizes available, each holds 5–6 mags Fits 1911, Browning Hi-Power, Glock 48, Glock 17, Glock 22, and similar styles Available in black, blue, and red. Made from durable PLA filament — sturdy enough for display use. If your mags are sitting in bins or drawers, this setup turns the clutter into a clean, easy-to-access display. $10 each. $25 for 3. 👉 Help support a Canadian Army veteran and his disabled daughter. 👉 Click here to see my other ads:https://townpost.ca/user/younggunscanada

categories:GunsSporting Goods

4341 impressions

320 views