*Price reduction fro a quick sale* This is a High Condition 1944 BSA selected to be upgraded into a "T" pattern sniper rifle with correct "TR" marking on the left side of receiver ring. These sniper rifles were based on hand selected No. 4 rifles and saw service with Commonwealth forces during WWII and into the 1960s. In addition to the rifle's standard protected blade front sight and ladder rear, Scope is a No. 32 Mk. II OS. 1650A & mounted on a quick detach base. Scope is dated 1944 and numbered "15803"which is matched to the rifle with the same number force matched on the wrist(see photo). Cast scope base is a high quality reproduction(Roger Payne replica) and was Matched 3522 to same as on the bolt and rifle. Walnut stock with cheek piece, "S51" also stamped behind the grip indicating the rifle is a wartime conversion by famed gunmaker Holland & Holland. CONDITION: Very Good. Metal retains the vast majority of its arsenal applied finishes with some fading. Stocks show small nicks and impressions throughout as is to be expected on military issue arms. Good, strong grooves and bright bore. Scope is original and is still very clear for it age. Also included as an original green metal scope case for securing the scope. However, the numbers on this case are not matching the scope.. Barrel Length: 25 - 1/2" Caliber/Bore: .303 BSA Model: No. 4 MK 1* (T) Serial Number: D3522. Also comes with a Chest S.A. No15 Mk1 - Transit Chest for the Lee Enfield No 4T Sniper Rifle. Overall I would give the condition a 9/10. This world make an excellent addition to any collection. This is truly the Rolex of British sniper rifles!) If you are looking for something very rare only 21,617 rifles were converted by Holland and Holland from 1942-1946. Can ship anywhere in Canada, Please see my other ads for rare and collectable firearms and accessories

categories:Sporting Goods

14017 impressions

1081 views

Beautiful Armoire built by Oakwood Interiors Fine Furniture. Solid built, two piece set; lower base has pull out drawers (one large, 2 small, and 2 medium drawers). Dove tail finish - Heritage Style design. Everything is cedar lining quality, Armoire only, no other pieces available for the set. Scratches on top of bottom base from movers., Moved, last piece left to sell due to downsizing. Top of armoire set has hanging rod, pull out storage area and TV cable / shelf set up. Can arrange viewing with notice as unit is in storage. Curb side pickup ready to go. Must sell cannot keep it

categories:Household ItemsFurniture

16213 impressions

834 views

Brand new inflatable tent. 880 new with pump. Comes with brand new air pump. Never slept in. Incredible family tent. Very high quality. Pick up Cochrane An inflatable tent for 4 people with maximum comfort: two separate bedrooms, a spacious living room, and the Fresh & Black technology keeping the inside cool. Our motivation? To offer you a very fast-pitching inflatable tent with our Fresh&Black. Less heat and light in your tent, so you can decide when to wake up! Features Living room Living room of 5.8 sqm with a tent height of 1.95 m. This tent has several pieces of equipment: - a built-in groundsheet at the entrance in case of rain - mosquito net windows with blackout cover - storage pockets in the bedrooms and living room Pitching/Striking Inflatable all-in-one structure with pre-assembled bedrooms and fly sheet. Using our Quechua red 5.2-litre pump with built-in pressure gauge, we advise you to inflate the tubes to 7 psi pressure. To view this pump, copy the reference 8243066 and paste it into the search engine of our website. Sun protection Our Fresh&Black technology relies on a UPF 50+ sun protection fabric. Important: be careful, a large amount of UV rays can pass through an open door. Ventilation The ventilated flysheet on the living room lets you ventilate and limit condensation inside your tent. Outside each room is a high ventilation hatch. Inside each bedroom is a large, low ventilation hatch. The living room is equipped with a mosquito net and the bedrooms with high mosquito nets. Wind resistance We test all our tents in a wind tunnel on a turntable. The goal is to expose each side of our tent to the same wind intensity. When the tent is properly pitched and the guy ropes are in place, it should remain habitable in a force 7 wind, measured at 60 km/h. Waterproofing We test our tents to validate their waterproofing. The first test is done in the laboratory: 4 hours under 200 litres of water/hour/m², the equivalent of a tropical rain shower of 200 mm per hour. The second test is done by our teams in the field under real conditions. This tent is equipped with a polyurethane-coated polyester flysheet with 2000 mm water resistance. It also has seams taped using heat-sealed strips and a 190 g/m² polyethylene groundsheet. Size and weight Rectangular cover | 75 x 39 x 39 cm | 114 litres | 17.5 kg Guarantee As designers and users who love our playground, we care about the durability of our products. That's why all our tents are designed to be repairable. Spare parts and repairs of inflatable poles are available at the workshop of your Decathlon store or on our website at the following address: http://bit.ly/sav-tentes. Should you have a problem with this tent, check the after-sales file: http://bit.ly/tente-gonflable-4p-2ch Poles, pegs Inflatable poles - All our inflatable poles have a two-layer arch structure: an air chamber in thermoplastic polyurethane (TPU) and a 600 denier* polyester cover. Living room reinforcement - There's an aluminum bar in the living room to stiffen the structure. Tent pegs - All our pegs are made of steel and have a diameter of 6 mm. *600 deniers indicates a weight of 600 g for a length of 9 m. Sleeping width Each bedroom of this tent is designed to accommodate a maximum of two 70 cm-wide mattresses.

categories:Sporting GoodsCamping and Survival Gear

2909 impressions

702 views

Antique vintage dining room set, made by Hespeler Furniture in Hespeler Ontario, early 1950's. Duncan Phyffe style. Table has 6 chairs, but we have 3 leaves, so it can really expand. China cabinet is one whole piece with curved glass in the side panels. Buffet sideboard has 6 drawers and 2 cabinets. Really beautiful set in nice condition. We had the chairs recovered a few years ago in neutral cream. Fair price for what we are asking, this quality of furniture is truly no longer made. An heirloom set.

categories:Household Items

1267 impressions

424 views

Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g

categories:Sporting GoodsGuns

87759 impressions

2574 views

The box is indented stamped TYPE 315H on the bottom edge on the inside of the door. The inside of the door has complete wiring schematic. The back panel also is marked 315 H. Metal crank on the right outside side of the box. The CHROME bells ring when cranked, The box is in great shape. The front cover has a decal “THE NORTHERN ELECTRICAL MANUFACTURING CO LTD” . The decal is showing its age. It is readable & recognizable and is in great shape for its vintage. The volume is adjustable by moving bell arms closer or farther from the clapper's resting position. Magneto appears to be in great condition. There is no apparent mold or mildew on the cloth wiring, winding insulation or wooden cabinet, Gongs & Ringer. Measures approximately 9 x 7 x 6 1/2 inches. This set has not been tested and is SOLD “ AS IS ”

categories:Household ItemsCollectibles

4244 impressions

682 views

Here is a U.S. model 1917 Trench Knife made by American Cutlery Company displayed with a U.S. model 1917 Helmet. This item still retains much of its original finish. The grips have a few minor dings with no cracks. The 9” triangle blade has one noticeable ding that would be consistent with a defensive block and one small area of pitting on two sides of the blade. The First World War brought along many advancements in firearms and armour but with that being said often the taking of trenches involved brutal hand to hand combat. Very often soldiers would find the trench battle too tight of quarters to use their rifles and would switch to knives, clubs, shovels and anything else that would give them an edge in hand to hand combat. Buyer must be 18 or older and able to prove it. Shipping is available at buyers expense.

categories:Sporting GoodsCamping and Survival Gear

10490 impressions

1155 views

This is a Rare Antique Remington Early Production Type I, A.K.A. The Double Derringer. Remington produced around 150000 model 95’s between 1866 and 1935. There were only around 1600 produced before the addition of an extractor. Making this one the hardest to find for collectors. This type is marked “E.Remington & Sons, Ilion, N.Y.” on one side of the barrel rib and “Elliot’s Patent Dec. 12, 1865” on the other. Later models would see the addition of an extractor and the barrel address moved to the top rib. This has a 3” barrel, is chambered in .41 rimfire and has a spur trigger. There are a a few light handling dings and almost no original finish left. The grips are in fine condition. Mechanically it is still very strong with the action working and cycling as it should. The hinges are intact. There is a slight play in the lock up which would be a fraction of a millimeter. These were carried by many people in the Wild West as they were easily concealed. Wild Bill Hickok is said to have carried a pair of these at times. This would make a great addition to a Remington collection and could be the centre piece to any collection. this is an antique so no PAL is required for purchase. Buyer must be 18 and able to prove it. Shipping is available at buyers expense. All used firearms should be inspected prior to any form of use. Short term layaway options are available.

categories:Sporting GoodsGuns

34911 impressions

2034 views

Hey Yall, I have a BT-4 combat woodsball setup for sale. I bought it around 2014 and messed around with it a bunch at my parents acreage but never took it out to play an actual game, and I am SO tired of moving it around. 300$ OBO, not married to the price but would like something decent for it. BT-4 Marker with extended barrel, fake silencer, bi-pod, dual position foregrip, 4 sided picatinny rail shroud, cyclone hopper, red dot sight, 3 position adjustable stock, and remote reservoir setup with hose. Also included is a carry bag for the marker, carry bag for the following parts list. Stock barrel, two barrel bags, two barrel cleaners, parts kit with screws and o-rings, multi tool, Allen keys, o-ring picks, crescent wrench, teflon tape, and anti-fog lens cleaner. With the setup I will include the three- 20Oz CO2 cylinders. No idea when they expire, no idea if they’re good or not. Could be all you need for the setup to be functional. Last time I used the marker was 2020 and it worked fine. Could need some o-rings and some oil and it’ll be good as new. Please reach out to me by email with any questions. Selling as a complete set, will not separate. Local pickup or meetup within the city of Calgary only.

categories:Sporting GoodsPaintball and Airsoft

4662 impressions

666 views

Great condition, parked in heated shop, well taken care of, truck has 6.0 L. Big block fuel injected gas engine, followed by a 5 speed Clark/Eaton FS4005C transmission with a factory 19,000 lbs Eaton 19050T 2 speed rear axle with electronic shift, and 9,000 lbs steer axle. There is a factory installed PTO that runs a pump for the tilt deck. The truck has a factory extended range fuel tank of 65 gallons. Interior is in great condition with full length bench seat, power steering, heavy duty rear leaf suspension. Engine has factory installed block heater, 120 amp alternator and hydraulic brakes. Unit has locking hand throttle to maintain engine RPM while using the PTO. Truck has front recovery/tow hooks. The tilt deck is 18’Lx8’W and is equipped with 6 tie down load straps in each side. Deck also has detachable metal side panels. The truck is rated at 13,6500 kg GVW and Tare of 5025 KG. Contact 403-934-5678

categories:Auto and TrailersTrucks

2209 impressions

313 views

One female left available. Puppies were born April 24th and are ready for their new homes. Both parents are under 10 pounds. Puppies have grown up around other animals and children. They will definitely be lap dogs and won’t want to leave your side. These puppies are perfect for someone looking for something unique. Puppies come with: -Health checked by vet -1st set of vaccines and deworming -A blanket so they have a familiar smell with them at their new home -A toy Please message me with any questions you may have.

categories:Pets and Animals

1422 impressions

332 views

for sale Mint conditions NXS 3.5-15x50 1/4 MOA Nightforce scope - MOA 1/4 dial - NPR 1 reticle superfine with illuminated - Zero Stop - front cover - Leupold heavy duty steel rings - Side bubble level comes with NXS warranty Original owner - bought it brand new. Sell it with rings, and bubble level Asking $2100 no tax. Serious offer Only. Contact by text or call at 403-399-6110

categories:Sporting GoodsGuns

5038 impressions

936 views

Brand new The JULIET4 4x Magnifier is designed to work as a stand-alone magnification solution or in conjunction with reflex optics. This family of magnifiers is an excellent choice for transitioning from close quarters to intermediate ranged targets. In conjunction with a reflex optic, the JULIET4 can be adjusted for height through the use of spacers. It has a PowerCam 90° Mount so it can be quickly flipped to the side for more immediate, close quarters scenarios or deployed rapidly to bring targets four times closer. Its quick release mount comes with built-in recoil lugs for repeatable zero. The JULIET4 has a front and rear thread-in lens protector to keep it secure from the elements. ROMEO4H FEATURES: Designed for modern pistols, MSR platforms and shotguns Comes standard with solid and see-through lens covers and quick release mount Ballistic Circle-Dot and Ballistic Circle QuadPlex options Users can select from 4 different integrated reticle options (Dot, Circle-Dot, Dot with Holds, Circle-Dot with Holds) 50,000+ hour battery life and the readily available CR2032 battery is side loading for quick battery replacement. Unlimited to acquire aiming point and target, regardless of eye position behind sight. MOTAC (Motion Activated Illumination) powers up or down when sensing motion Uses an ultra-efficient red LED illumination for daylight visibility and extended runtime True QR mount and low mount included Strong, lightweight aircraft-grade CNC aluminum housing Waterproof, IPX-7 rated, and fog-proof. JULIET4 Features: Aircraft grade CNC aluminum housing ensures a lifetime of reliable service. IPX-8 rated for waterproofing — up to 20 meters for 1 hour Dialectic coated prism size and weight Objective thread-in lens cover and ocular slip-on, flip-back lens cover included Backed by an Infinite Guarantee™

categories:Sporting GoodsGuns

5532 impressions

418 views

Brand new The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4 GEN 2. Made from precision cast black Melonite™ finished steel and compatible with both mil-spec and commercial-spec carbine receiver extensions. Features: Accepts any push-button QD sling swivel as well as the Magpul QDM Durable steel construction Case hardened and finished with Melonite™ for extreme resistance to wear and corrosion Works with both mil-spec and commercial-spec carbine receiver extensions (buffer tubes) NOTE: The ASAP QD is NOT compatible with A1/A2 fixed stocks as well as any other similarly mounted stock such as the Magpul PRS®, UBR®, and MOE® Rifle Stocks.

categories:Sporting GoodsGuns

5375 impressions

437 views

Introducing the AR-6 Compact Tactical Magazine Fed Crossbow. Developed by Steambow Austria, the AR-6 Stinger II uses a top-fed 6-shot magazine. The crossbow splits at the rear with the stock acting as a lever to draw the string, making actuation quick and easy. The fiber optic sight allows fast and intuitive aiming, while a red dot sight or scope can be attached to the front Picatinny rail for even more accurate shots. The AR-6 also features an internal accessory slot for use of an optional laser device. Made of high-quality reinforced polymer, the AR-6 Stinger II is extremely lightweight, rugged, reliable, and accurate to target at distances up to 80 feet. The AR-6 is easily disassembled and can compactly fit into a survival or bug-out bag. Weighing in at just 2.6lbs the AR-6 is easy and convenient to use and transport. The compact dimensions and light weight also make the AR-6 ideal for beginner and smaller statured shooters. Coming with: Vertical foregrip Telescoping AR-15 style buttstock (commercial-spec buffer tube) 6 training arrows 2 strings Stringing aid and manual. Note: Because these crossbows are over 500mm in length and are not designed or altered to be aimed and fired by the action of one hand (handgun style) they are not prohibited class and therefore non-regulated items. No PAL required. Features: •Open sights (rear sight & front sight) on top of the magazine •Top Picatinny rail for red dot sights •Full-length Picatinny rail on the bottom for foregrip or tactical light •Integrated accessory compartment for integral laser sight •2 external ports for attaching side picatinny rails

categories:Guns

12532 impressions

1092 views

Brand new TACTICAL LIGHT WITH RED LASER DESIGNED FOR USE WITH GLOCK® 43X MOS, GLOCK® 48 MOS, GLOCK® 43X RAIL AND GLOCK® 48 RAIL SUBCOMPACT HANDGUNS An industry first, the ultra-compact TLR-6® weapon light with high power LED and integrated red aiming laser features tool-less battery replacement without removing the weapon or the need to re-sight the laser. The light provides 1 hour of regulated runtime when in dual light/laser mode. Designed to securely attach to the trigger guard and rail of the GLOCK® 43X MOS, GLOCK® 48 MOS, GLOCK® 43X Rail and GLOCK® 48 Rail subcompact handguns. Features C4® LED illuminator and a 640-660nm red laser 100 lumens; 2,000 candela; 89m beam distance Runs 1 hour (LED only or LED/laser combo); 11 hours (laser only) Designed to securely attach to the rail and trigger guard of the following standard and compact railed handguns: Springfield Armory® XD®, XD(M)®, and XD® MOD.2® Smith & Wesson® M&P® GLOCK® Parabolic reflector produces a balance of beam and peripheral illumination; optimized electronics provide regulated intensity; red laser provides long-range targeting Ambidextrous switching (push-button on both sides) to access three modes: Laser only; Laser/LED combo; LED illumination only All modes feature a 10 minute auto shut-off to conserve batteries Batteries can be replaced while light remains mounted on gun; no need to re-sight laser after battery change Uses two CR1/3N lithium batteries (included) Removable cover for easy attachment/removal Windage and elevation adjustment screw mounted in brass bushing for dependable zero retention of laser Durable, impact-resistant polymer construction; IPX4 water-resistant; 1m impact resistance tested Operating temperatures of -20°F to +120°F Serialized for positive identification Size varies by model Limited lifetime warranty Assembled in USA

categories:Guns

7371 impressions

761 views