Made in Japan, 1970's. Solid spruce top. Maple back and sides. Bound top, back, and finger board. X Bracing on the top. One tuner replaced.Ratty old hard -shelled case included.

categories:Household ItemsInstruments

70 impressions

8 views

Brand new Non-restricted Caliber: .357 Mag. Capacity: 10 Rounds Action: Lever Action Safety: Transfer Bar Receiver Finish: Industrial Hard Chrome Satin Barrel: 20" Round Hard Chrome Plated Steel Front Sight: Brass Bead Rear Sight: Fully Adj. Semi-Buckhorn w/ Diamond Insert Scopeability: Drilled and Tapped Scope Mount Type: BB-RSM Stock Material: Stained Hardwood Buttplate: Black Ventilated Rubber Recoil Pad Length of Pull: 14" Rate of Twist: 1:16 Overall Length: 37.5" Weight: 7.00 lbs. Made in USA

categories:GunsSporting Goods

11937 impressions

737 views

Hard to find especially in such excellent condition, bluing 99.9%, stock has a few surface minor dings but no cracks. Rifling clean bright and vivid. Drilled and tapped. 24 inch barrel, appears all original. Top feed. serial number 40425X, with "30" stamped in Left side nearest receiver. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:GunsSporting Goods

68260 impressions

2263 views

Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g

categories:GunsSporting Goods

78081 impressions

2343 views

Here is a Canadian/British origin and the C broad arrow marking), and cross-referencing the images (including the faint stamping that reads “Z.L.&T. LTD 1943” along with the C broad arrow symbol), this is an original Canadian WWII Pattern 1937 (P37) web pistol holster. Features •  Khaki/tan heavy cotton canvas construction, typical of British/Commonwealth web gear from the era to save on leather due to wartime shortages. •  Flap closure with brass snap (often called a “lift-the-dot” fastener in some variants). •  Brass or metal belt hanger and loops on the back for attachment to P37 web belts or pistol belts. •  Angled design for right-side hip carry, with a reinforced muzzle end. •  Markings: “Z.L.&T. LTD 1943” refers to the manufacturer Zephyr Looms & Textiles Ltd. (Toronto, Canada), a known WWII contractor for Canadian military gear. The “C broad arrow” (often stylized as C↑ or C with an arrow inside) is the Canadian government property/acceptance mark, indicating it was issued for Canadian forces (part of the British Commonwealth system, where the broad arrow denotes ordnance property, and the “C” specifies Canada). This holster was designed primarily for revolvers like the Webley Mk IV .455 or Enfield No. 2 .38, which were standard for Canadian troops early in WWII. However, similar P37 holsters were also used or adapted for the Canadian-made Inglis Browning Hi-Power 9mm pistol (produced from 1944 onward). Original Canadian WWII P37 canvas holsters in good used condition (like this one, with intact hardware and no major tears) typically sell for $150–$350 on sites like eBay, GunsInternational, or militaria forums/auctions. Factors influencing price include: Invasion date1943 date (pre-U.S. entry into the war, during the British Commonwealth’s initial buildup). Clear markings (the C broad arrow and manufacturer stamp add provenance). Condition: This appears solid but field-used, so more toward the $200–$300 range. Recent comparable sales include similar Z.L.&T. Ltd.-made holsters from 1943–1945 fetching $200–$300. Can ship anywhere in Canada Please see my other ads for collectable military accessories.

categories:Sporting Goods

1033 impressions

67 views

Here is a Canadian/British origin and the C broad arrow marking), and cross-referencing the images (including the faint stamping that reads “Z.L.&T. LTD 1940” along with the C broad arrow symbol), this is an original Canadian WWII Pattern 1937 (P37) web pistol holster. Features •  Khaki/tan heavy cotton canvas construction, typical of British/Commonwealth web gear from the era to save on leather due to wartime shortages. •  Flap closure with brass snap (often called a “lift-the-dot” fastener in some variants). •  Brass or metal belt hanger and loops on the back for attachment to P37 web belts or pistol belts. •  Angled design for right-side hip carry, with a reinforced muzzle end. •  Markings: “Z.L.&T. LTD 1940” refers to the manufacturer Zephyr Looms & Textiles Ltd. (Toronto, Canada), a known WWII contractor for Canadian military gear. The “C broad arrow” (often stylized as C↑ or C with an arrow inside) is the Canadian government property/acceptance mark, indicating it was issued for Canadian forces (part of the British Commonwealth system, where the broad arrow denotes ordnance property, and the “C” specifies Canada). This holster was designed primarily for revolvers like the Webley Mk IV .455 or Enfield No. 2 .38, which were standard for Canadian troops early in WWII. However, similar P37 holsters were also used or adapted for the Canadian-made Inglis Browning Hi-Power 9mm pistol (produced from 1944 onward). Original Canadian WWII P37 canvas holsters in good used condition (like this one, with intact hardware and no major tears) typically sell for $150–$350 on sites like eBay, GunsInternational, or militaria forums/auctions. Factors influencing price include: Rarity of the early 1940 date (pre-U.S. entry into the war, during the British Commonwealth’s initial buildup). Clear markings (the C broad arrow and manufacturer stamp add provenance). Condition: This appears solid but field-used, so more toward the $200–$300 range. Recent comparable sales include similar Z.L.&T. Ltd.-made holsters from 1943–1945 fetching $200–$300. Can ship anywhere in Canada Please see my other ads for collectable military accessories.

categories:GunsSporting Goods

4733 impressions

104 views

This is an original U.S. WWII-era M15 Rifle Grenade Launcher Sight mounting plate, (also referred to as the M15 sight or grenade launching sight), complete with its accompanying War Department technical bulletin (TB 23-30-1, dated March 13, 1944) providing installation and usage instructions. The square metal piece in your photos (the black rectangular plate with two screw holes, partially unwrapped from the preservative paper) is the mounting plate (also called the base plate or bracket) for the WWII U.S. M15 Rifle Grenade Launcher Sight. Its purpose: •  It permanently attaches to the left side of the rifle’s wooden stock (on the M1 Garand, M1903 Springfield, or M1 Carbine) using two special wood screws (included in the kit).

categories:Sporting Goods

1320 impressions

50 views

This is an original WWII-era Canadian “Crash” tanker helmet (officially known as the Helmet, Crash, Tank Battalion), a rare piece of Canadian armored forces gear produced in limited numbers (around 12,000 total) starting in 1940. It features a cloth-covered cork shell (painted black), rubber side vents, a web suspension liner, leather chinstrap, and the distinctive leather “scrum” (headphone holder) laced and buttoned underneath for radio equipment. These were primarily used by tank crews in Canada (not issued overseas) and remained in service until the 1960s. Your example appears complete, with visible wear and patina consistent with age and use, including some cracking on the shell and scrum—common for these due to the materials. Condition and Features •  Good overall condition for its age. •  Intact scrum. •  Original laces and straps. •  No major damage visible. Market Value These helmets are sought after by collectors of Commonwealth/WWII Canadian militaria due to their rarity and specialized use. Current market values for originals in similar used but complete condition typically range from $400 to $800 USD (roughly $550–$1,100 CAD, depending on exchange rates and location).

categories:Sporting Goods

483 impressions

54 views

RICASSO MARKED: "U.S.M.C.", OTHER-SIDE MARKED: "CAMILLUS, N.Y.", LEATHER WASHER GRIP, METAL POMMEL, NO VISIBLE MARKINGS, BLACK LEATHER SCABBARD, NO VISIBLE MARKINGS, BLADE APPROX. 7" & OAL APPROX. 12". Can Ship Anywhere, Please see my other Collectable Accessories and Rifles.

categories:Camping and Survival GearSporting Goods

13059 impressions

1190 views

Cal. 303 Brit. S# 94L8460. Bbl. 25 1/2”. Blade front sight with protective ears. MK3 ladder aperture rear sight graduated to 1200m. Mismatched numbers. Left side of the receiver is marked with No. 4 MKI*, Long Branch, and 1950 markings. Arsenal rework Suncoirte finish. Hardwood stock with grooves set with bottom-mounted sling swivels and canvas marked sling. MAG. one 10-rd. CONDITION: stock set has a darkened appearance with a few light, scattered dings, scratches, and handling wear. Metal shows overall fading to gray with a Suncorite and finish. Action functions properly when hand-cycled. Very good to excellent bore. Spiked Bayonet and metal scabbard can be added for an extra $50 Can ship anywhere in Canada, Please my other ads for rare and collectable firearms and accessories.

categories:GunsSporting Goods

47296 impressions

1749 views

Brazilian Model 1908 Mauser Rifle unissued 116 years old! Excellent pre WW1 German craftsmanship and quality. Manufactured under contract to Brazil, left side of the receiver stamped DEUTSCHE WAFFEN-UND/MUNITIIONSFABRIKEN.BERLIN. The right side of the chamber stamped MOD.1908. Complete with bayonet and brass mounted leather scabbard. Excellent un-issued condition. All original matching numbers. 7mm Mauser. Can Ship Anywhere in Canada, Please see my other collectable rifles and accessories.

categories:GunsSporting Goods

57249 impressions

1623 views

*Price reduction fro a quick sale* This is a High Condition 1944 BSA selected to be upgraded into a "T" pattern sniper rifle with correct "TR" marking on the left side of receiver ring. These sniper rifles were based on hand selected No. 4 rifles and saw service with Commonwealth forces during WWII and into the 1960s. In addition to the rifle's standard protected blade front sight and ladder rear, Scope is a No. 32 Mk. II OS. 1650A & mounted on a quick detach base. Scope is dated 1944 and numbered "15803"which is matched to the rifle with the same number force matched on the wrist(see photo). Cast scope base is a high quality reproduction(Roger Payne replica) and was Matched 3522 to same as on the bolt and rifle. Walnut stock with cheek piece, "S51" also stamped behind the grip indicating the rifle is a wartime conversion by famed gunmaker Holland & Holland. CONDITION: Very Good. Metal retains the vast majority of its arsenal applied finishes with some fading. Stocks show small nicks and impressions throughout as is to be expected on military issue arms. Good, strong grooves and bright bore. Scope is original and is still very clear for it age. Also included as an original green metal scope case for securing the scope. However, the numbers on this case are not matching the scope.. Barrel Length: 25 - 1/2" Caliber/Bore: .303 BSA Model: No. 4 MK 1* (T) Serial Number: D3522. Also comes with a Chest S.A. No15 Mk1 - Transit Chest for the Lee Enfield No 4T Sniper Rifle. Overall I would give the condition a 9/10. This world make an excellent addition to any collection. This is truly the Rolex of British sniper rifles!) If you are looking for something very rare only 21,617 rifles were converted by Holland and Holland from 1942-1946. Can ship anywhere in Canada, Please see my other ads for rare and collectable firearms and accessories

categories:Sporting Goods

10242 impressions

858 views

1994 LINCOLN TOWNCAR EXECUTIVE In Immaculate condition inside out No Accidents or Claims Clean Carfax No mechanical issues Power Trunk Power Antenna Power Seats Power Windows Power Locks Drives like a dream Currently registered and active so the kms might vary a little from what's mentioned in the ad Rear passenger side door window motor needs to be replaced, I have the whole assembly but not the time to change it. So, it will come with it Save yourself some time and effort; I won't buy any sort of report, and the deal will be in person only. No low ballers or tire kickers

categories:Auto and TrailersCars

9605 impressions

1308 views

Brand new Pump Action Non restricted Caliber: 12 gauge Chamber: 3" Capacity: 10+2 Barrel length: 14" Barrel Type: Cylinder Bore Overall Length: 29″ Weight: 12 lbs. Adjust comb collapse stock MC3 Side & Top Rail Mount M4 Stock Color: Black Coming with: 6 Chokes Forward grip Flip-up sights Carry case Made in Turkey 930.297

categories:GunsSporting Goods

10032 impressions

525 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:GunsSporting Goods

12596 impressions

418 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

10542 impressions

274 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

19893 impressions

731 views

Many Czech produced post-war Mausers were made with mostly late war and some newly produced parts. These were sold to various different militaries and on the commercial market many and of these were sold to the Israelis as well. The rifle features many late war stamped parts including the oversized winter trigger guard but does include a half size cleaning rod unlike the Kriegsmodell K98's produced by the Germans. It does not have a stock disk, as it just has a hole drilled in the butt cap for disassembly of the bolt. This particular example has a low serial number, but the serial number ranges are all over because of different contracts. The whole gun matches with the new forced match serial number. It has a scrubbed receiver, and has a beech wood stock and handguard in a nice brown color. The rifle bore is actually in very good shape, but there is some stubborn fouling stuck in there and I don't have a 32 Caliber cleaning brush to remove it but I'm sure if you use the proper brush it should come out pretty easy since it's not rust. Just shooting the rifle might even remove it. The muzzle crown is an excellent condition as pictured. The rifle does have minor some stock damage. It looks like a vice dent or some sort of hammering pattern, but it's only on the one side (pictured). Overall the gun is in very good original condition and the action is nice and smooth and it is unfired by me. This is a nice unique example of a k98 made by Brno, who is very well known for their quality produced firearms. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:GunsSporting Goods

16019 impressions

958 views

PPE's Ported Fuel Rail Fitting replaces the restrictive stock fitting and helps maintain fuel rail pressure during heavy engine load situations. This high-quality stainless steel fitting increases the available fuel flow volume from the CP3 pump to the fuel rail. Adequate fuel flow is vital to producing maximum efficient/clean horsepower. These fittings benefit both fuel rails since the driver side fuel rail feeds the passenger side. (1 available) **please see my other ads, thank you**

categories:Auto and TrailersAuto Parts

2808 impressions

323 views

Brand new Non-restricted Caliber: 357 MAG/.38 Special Capacity: 10+1 Barrel Length: 20″ Safety: Manual Safety OAL: 37.5″ Weight: 7 lbs Stock: American Walnut, Checkered Straight Grip Receiver: Blue, Drilled & Tapped Sights: Ft:Beaded Rr:Adjustable Semi-Buckhorn w/ Diamond Made in USA

categories:GunsSporting Goods

20260 impressions

1682 views

New Henry Lever Action Rifle 45-70 Govt., 22" Octagon Barrel, Brass Receiver, Side Gate, Large Loop Red Head Rifle Case 1 rifle lock 1 - box 45-70 300 grain shells

categories:GunsSporting Goods

2652 impressions

168 views