Vintage 1950s funny vacation 12 postcards collection, all unused several different situations on beach, driving, a nice collection for remembering those holidays, south side pickup, no holds without e transfer and if posted it is available.

categories:CollectiblesHousehold Items

953 impressions

320 views

Vintage Sheena Easton Poster from 1981, For Your Eyes Only Era! 31x 23 1/2 “ what a Modern Girl! south side pick up, no holds with out e transfer.

categories:CollectiblesHousehold Items

12308 impressions

1355 views

Miniature Made in England Bobby Metropolitan Police Gold colour bell measures about 2 1/4 tall and 3 inches long, perfect for any police collector, south side pick up, no holds without e transfer and if posted it is available.

categories:CollectiblesHousehold Items

2530 impressions

351 views

Nice reprint of the Times News Paper for November 14 1854 Charge of the Light Brigade, this reprint is from the 1970s and was in storage until now, unique item speaks to the charge as it was written then has classified adds, stock reports and other news just like in 1854, this paper though a reprint it self is over 40 years old and does show signs of storage, unique item for someone that loves old British Military or old newspapers. Cool item size of paper is 23 inches long and 17 inches wide, thanks for looking! South side pick up and no holds without a e transfer. If posted it is available.

categories:CollectiblesHousehold Items

125 impressions

62 views

Vintage zippo nail file and knife safety award still in box with warranty papers measures 2 inches long and 1 inch tall, south side pick up, no holds with out e transfer and if posted it is available.

categories:Household Items

2788 impressions

252 views

1910 Carl gustafs 6.5x55 Swede mauser SN 262063 partially matching, reciever and bolt matches. Near full furniture (missing the armoury dial as seen in picture of right side. Light to moderate wear on wood, it is over 100 years old, crest is in very good sharp condition. Barrel, receiver, and bolt has not been reblued floor plate, and trigger assembly looks like it has been reblued. stock has not been sanded. Metal stamps are sharp with Swede crowns populating the bolt, barrel, sights and receiver.

categories:GunsSporting Goods

15743 impressions

695 views

I have a Iver Johnsons Champion 16 gauge single shot for sale. Arms and Cycles works (Canada) LTD- Montreal Made in oobourg. (choke bore, Barrel and lug forged in one) 30 inch barrel. Gun is in good working order. locking release spring worn and has to be locked manually. Stock has very nice hand made wood burning on fore end and left side butt stock picture of elk. All hand made.  open to trades, Located in evansburg but make frequent trips to spruce grove .

categories:GunsSporting Goods

65827 impressions

3182 views

Prices A- Double Tap Trigger Over Travel Limiter - $20 B - Aperture Ghost Ring Sights Set - $20 C/D - Extended Magazine Release (Right and Left Handed) - $25 **$5 off each additional part for any order combo (2 or more) **Ex. A+B=$35-($5 discount)=$30 Total **A+B+C=$20+$20+$25=$65-2*($5 discount)=$55 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) Double Tap Trigger Over Travel Limiter - $20 Replaces the Factory Trigger Spring Plunger Reduce the Over Travel by 85% for Quick and easy "Double Taps" Machined Stainless Steel Aperture Ghost Ring Sights Set - $20 Replaces the Factory Open Sights Comes in a Set of Two (Large/Small Apertures) 1x Plinking Aperture Rear Sight Plate 0.125" (3.2mm) 1x Target Aperture Rear Sight Plate 0.063" (1.6mm) Material: Precision Machined Stainless Steel Finish: Matte Black Oxide (Blued) Weight: 0.02oz (0.4g) **Not compatible with Aftermarket, Fiberoptic, TruGlo, Hiviz, or Rear Sights with the Single Screw Design. See image attached** *Screws not included. Must use original screw(s) provided by Ruger or source new screws.* Extended Magazine Release (Right and Left Handed) - $25 Replaces the Factory Magazine Release No Snag Design (Tab only on one side) Ergonomic Quick Index Finger Mag Release Compatible with the Charger Pistol Material: Precision Machined Aluminum Finish: Matte Black Anodize Weight: 0.56oz (16g) **Not compatible with older Metal Trigger Groups** **Mag Release does not fit certain aftermarket Archangel Stocks**

categories:GunsSporting Goods

52748 impressions

2289 views

Brand new in the box 4th Gen Ram 1500 drivers side mirror. Puddle light , blinker and heated.

categories:Auto and TrailersAuto Parts

10888 impressions

782 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:GunsSporting Goods

6751 impressions

252 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5144 impressions

172 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

11651 impressions

520 views

Many Czech produced post-war Mausers were made with mostly late war and some newly produced parts. These were sold to various different militaries and on the commercial market many and of these were sold to the Israelis as well. The rifle features many late war stamped parts including the oversized winter trigger guard but does include a half size cleaning rod unlike the Kriegsmodell K98's produced by the Germans. It does not have a stock disk, as it just has a hole drilled in the butt cap for disassembly of the bolt. This particular example has a low serial number, but the serial number ranges are all over because of different contracts. The whole gun matches with the new forced match serial number. It has a scrubbed receiver, and has a beech wood stock and handguard in a nice brown color. The rifle bore is actually in very good shape, but there is some stubborn fouling stuck in there and I don't have a 32 Caliber cleaning brush to remove it but I'm sure if you use the proper brush it should come out pretty easy since it's not rust. Just shooting the rifle might even remove it. The muzzle crown is an excellent condition as pictured. The rifle does have minor some stock damage. It looks like a vice dent or some sort of hammering pattern, but it's only on the one side (pictured). Overall the gun is in very good original condition and the action is nice and smooth and it is unfired by me. This is a nice unique example of a k98 made by Brno, who is very well known for their quality produced firearms. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:GunsSporting Goods

9893 impressions

640 views

Hard to find especially in such excellent condition, bluing 99.9%, stock has a few surface minor dings but no cracks. Rifling clean bright and vivid. Drilled and tapped. 24 inch barrel, appears all original. Top feed. serial number 40425X, with "30" stamped in Left side nearest receiver. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:GunsSporting Goods

61869 impressions

2099 views

Mathews Switchback XT Left Hand compound bow with everything needed for target shooting and or hunting. 18 arrows with field points for target shooting and broad heads for hunting. Has 2 wrist releases and a 4 finger release. Sighted in at 10-50 yards. Comes with a hard shell case and a soft sided case. All items as seen in the case as well as multiple other miscellaneous items. Selling due to a non repairable shoulder arthritis issue.

categories:Sporting Goods

518 impressions

80 views

Winchester Model 94 125th Anniversary High Grade Rifle 30-30 Win Brand new in box. Factory fired only. 24 inch barrel. Special Limited Edition - Celebrate by giving your self the greatest lever action in history. Hand-chased engraved, nickel finish receiver, gloss blued, button rifled, full octagon barrel, grade III/IV Walnut, spade checkering It is really quite remarkable what can be accomplished by an artist when working with a Model 94 Winchester canvas. Compelling? Remarkable? Classic? Exquisite? Timeless? Mysterious? The answer is all of the above. The best and most revered lever action of all time can be yours in a special 125th Anniversary High Grade version. Let's face it, you missed your chance to buy one in 1894, but there is still time to get a new one of these very special rifles. Very limited numbers remain. RECEIVER – Steel; Nickel finish; Hand-chased engraving on both side of the receiver; Drilled and tapped for scope mounts BARREL – Gloss blued finish; Button rifled, Full octagon; Special barrel marking ACTION – Lever-action; Top tang safety STOCK – Grade III/IV Walnut; Spade checkering FEATURES – Drilled and tapped hammer for hammer spur extension (included) Pal is a must and will be verified. No trades, thanks. Price is firm. Shipping is only available on buyers expense. Serious inquires only please.

categories:GunsSporting Goods

70951 impressions

1572 views

TOPSPAW SOLD AT pETSMART. Item 5152514 39"-72", STRONG LIGHTWEight with side rails,non slip surface. adjustable length, and carrying handle. still in box, regular price $129. Pets can enter and exit vehicle without jumping.

categories:Pets and Animals

2861 impressions

479 views

Package of near mint Spirit of 76 Toy soldiers, made in 1973 all appear in package and intact, counting from bad appears there are an extra two soldiers in the package, small tear on bottom of bag, soldiers have never been played with made by MPC multiple toy makers! A neat set for collectors and living some old time play! South side pick up, no holds without e transfer and if posted it is available, $26 to ship in Canada.

categories:CollectiblesHousehold Items

7980 impressions

1017 views

I accidentally bought 3 boxes of .300 Winchester short mag 180 grain. I got them at Cabelàs. I actually needed WMG instead. Too much in a hurry. can’t’ return them. Paid 99.99$ a box plus tax (315.00$) I want to sell all 3 for 275$. My loss your gain. Local pick up in St Albert area or willing to meet on the north side of Edmonton

categories:GunsSporting Goods

1789 impressions

73 views

Previous sale cancelled due to non payment.....Still 0ffering straight sided, paper patched ( .4035 to .4045 ) medium hardness 8/9 which were very accurate in my original 40-70 and 40-50 sharps rifles. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

10578 impressions

522 views

Ramp extensions for triton trailer or similar design factory made aluminum they extend width by 9” per side they were used to load side by side on to trailer shown in pictures overall length of each 67 1/4” paid 400 originally excellent condition

categories:Auto and TrailersUtility Trailers

12283 impressions

1076 views