Brand new Over/Under Non restricted Caliber: 12 gauge Chamber: 3" Capacity: 2 Barrel Length: 30" Barrel Finish: Blued Adjustable trigger Microcore® recoil pad Opening lever with black rubber overmoulding for better grip B-Fast® stock Wide receiver improves stability and balance Steelium® Plus barrels Optimachoke® HP chokes Weight: 5.5 kg Made in Italy

categories:Sporting GoodsGuns

15586 impressions

1199 views

This is a prestine Model14 American Classis in 243 cal. Not a mark on the stock ( no scratches, dings, divots) barrel has slight rub mark towards top of it that’s it. Comes with what you see, whole package. Gun, scope( Tasco World Class 6-18x50 with adjustable objective end), bipod ( 12-24in.), and strap. It’s a tack driver, bullets touching at 100yds. With my reloads. These American Classics are hard to find

categories:Sporting GoodsGuns

5283 impressions

503 views

Brand new 5-20x50mm 30mm Tube Second Focal Plane Trijicon produces battle-proven aiming systems that deliver rapid target acquisition and increased hit potential under any lighting conditions. Their self-luminous aiming systems empower you to execute any shot with complete confidence in bright light, low light or no light at all. With a stunning magnification range, a 30mm tube, and an impressive objective, the AccuPoint 5-20x50 looks mighty serious while delivering the power needed to get on target across long distances. This fine optic is also graced with a very handy third turret that re-focuses the reticle to eliminate parallax error. Sighting during twilight conditions is enhanced considerably by the remarkable 50mm objective, while the dual tritium/fiber optic reticle illumination system provides a vibrant aiming point under any conditions. A mounting base and rings are used to attach a riflescope to a firearm. A comfortable sight picture is contingent upon the height of the rings. A comfortable cheek-weld is the result of properly positioning the scope over the receiver. Mounting the scope close to the receiver is preferable, yet scopes with larger objectives need higher rings so the front bell can clear the barrel. It should be noted that in many mounting applications, a professional gunsmith's skills will be needed for proper installation. 30mm Main-Tube 6061-T6 Aluminum main-tube is waterproof to 10' Mil-Spec Finish Type III hard anodized per MIL-A-8625 , Class 2 dull & non reflective Multi-Layer Coated Lenses Provide superior clarity, zero distortion, flare/glare reduction Side-Focus Parallax Correction Third turret on saddle actuates parallax correction for long-range accuracy Fiber Optics and Tritium Illumination Proprietary battery-free technology provides a vivid aiming point without the need for failure-prone batteries Dual-Illuminated Standard Crosshair w/Green Dot Reticle A series of dots upon the cross hairs gives the shooter the ability to judge bullet drop and the proper hold over for accurate long range shot placement. Trijicon's proprietary tritium/fiber-optic illumination technology places a brilliant green dot at the intersection of the stadia. This scope has the reticle positioned in the rear or second focal plane so it will not magnify when the scope is zoomed to high power. This leaves the sight picture unobstructed for a clear view at all times. Reticle: Standard Crosshair w/Green Dot Main-Tube Diameter: 30mm Linear Field of View: 5x: 19.1' @ 100 yd / 6.3 m @ 100 m 20x: 5.1' @ 100 yd / 1.7 m @ 100 mExit Pupil Diameter5x: 10mm 20x: 2.5mmEye Relief5x: 3.8" / 96.5mm 20x: 4.1" / 104 mm Impact Point Correction: 1/4 MOA Maximum Windage/Elevation Adjustment Windage: 34 MOA Elevation: 34 MOA Weatherproofing: Waterproof to 10.0' Length: 13.6"/345mm w/o sunshade Weight: 29.4 oz / 0.83 kg w/ sunshade Coming with: Weatherproof Logo Sticker 3.0" Sunshade Pair of Lens Caps Limited Lifetime Warranty (15 Year Warranty on Tritium)

categories:Sporting GoodsGuns

8921 impressions

637 views

I have for sale a Mossberg MVP-LC 7.62 MM nato (308 cal) with a Vortex HS-T scope combo Viper HS-T 4-16x44. Brand new never fired a single shot, carbon fibre by pod. Thread on muzzle brake, butt stock adjustable and mag pole grips, metal clip, and spiralled bolt, super heavy flute barrel, adjustable trigger. Also included is a Cabela’s Armor extreme double long- gun case. And also included is a Cabela’s shooting Mat. I bought this just before covid hit , was planning to do some long range shooting at the range, but never happened. Firm on the price . I paid 3100.00

categories:Sporting GoodsGuns

9520 impressions

1221 views

Hunting season is here, and I have for sale or trade one of the best backpacks you can get. This backup is brand new, weatherproof, totally adjustable on side and width, has plenty of space and cand be adapted to any load or situation, including the person's size. Has a water carrier pocket so you can keep hydrate without stopping, meat, carry comparment, gun adjustable carry support, 74Lt load space, padded belt support and pockets, plenty of carabiner attachments, etc. It also has a full weatherproof bright oranje cover and it is framed. So all you can ask for, and from a very good brand cheap. I am asking $360 cash for it. this backup is not that easy to get in Canada and if you do, it is gonna cost you far more than that. I will also could concider trades for non restricted short barreled 12ga shotguns, 22Lr, 22mag, 17HMR rifles (Not Savage unless Overwatch or Mark II with wood or Aluminum stock, not Rossi neither) or non corrosive ammo in 7.62x39, 308 / 7.62×51, 5.56 / 223, 9mm, 22Lr,12 Ga, illuminated optics, AR 15, AR 10, Derya mt22, Ruger 10/22, MRX 5.56 magazines. Shipping is available at buyer's expense. Trades are only local and face to face. If you are interested please text me (403)615-7461

categories:Sporting GoodsCamping and Survival Gear

15630 impressions

665 views

This bullet is designed in the MatchKing® tradition, and manufactured to MatchKing® standards, and intended for rifles shooting magnum cartridges, such as the 338 Winchester Magnum and 338-378 Weatherby. This bullet will shoot well in 338 Winchester Magnum barrels with 1×12″ twist rate. While they are recognized around the world for record-setting accuracy, MatchKing® and Tipped MatchKing® bullets are not recommended for most hunting applications. Although MatchKing® and Tipped MatchKing® bullets are commonly used for varmint hunting, their design will not provide the same reliable explosive expansion at equivalent velocities in varmints compared to their lightly jacketed Hornet, Blitz or Varminter counterparts. Box quantity: 50

categories:Sporting GoodsGuns

8394 impressions

431 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2844 impressions

418 views

Brand new SureFire SFMB muzzle brake suppressor adapters greatly reduce both recoil impulse and muzzle rise so that your weapon tracks straight back, keeping you on target for faster shot-to-shot recovery. The proprietary Impulse Diffusion design minimizes side blast and rear-directed concussion effects. Precision machined from U.S. mill-certified heat-treated stainless steel bar stock and DLC-coated for extreme durability, they are available for a variety of weapon calibers and muzzle thread specs, and every SFMB serves as a rock-solid mounting adapter for SureFire’s combat-proven SOCOM Series Fast-Attach® suppressors. The SFMB design incorporates multiple bearing surfaces to ensure superior suppressor alignment. Blind pilot holes at the 3 o’ clock and 9 o’clock positions enable fine-tuning of recoil characteristics for individual shooting styles or ammunition characteristics. Blind pilot holes at the 6 o’clock position enable indexing the adapter at bottom dead center. All that’s required is a basic hand drill and appropriate drill bits. Offset porting delivers greatly reduced recoil impulse and muzzle rise, so the weapon tracks straight back to keep you on target for faster shot-to-shot recovery Multiple bearing surfaces for superior suppressor alignment Precision machined from U.S. mill-certified heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Inspected for all critical dimensions including concentricity and alignment Pilot holes for tuning of muzzle brake and to pin-and-weld to rifle barrel as needed DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Serves as rock-solid mounting adapter for SureFire SOCOM Series sound suppressors Labyrinth seals prevent carbon buildup on suppressor lock ring indexing system Model Number: SFMB-762-M18x1.5 Caliber: .308(7.62) Thread Pitch: M18X1.5

categories:Sporting GoodsGuns

8576 impressions

582 views

063912 I have for sale at Mossberg MVPLC 7.62 MM NATO ( 308 ) very low round, count, carbon fibre by pod . thread on muzzle, bake , ready for other attachments. mag pole but stock adjustable .and mag pole grips, metal clip, and spiralled bolt super heavy fluted barrel Very accurate bench shooter. Rail included.. scope And rings included. . package when purchased was $2500 with the vortex 4 to 16 x 44 viper I would include that scope if interested or the first focal plane West Hunter 4 x 16 x 44 First focal plane which ever you would prefer.

categories:Sporting GoodsGuns

18106 impressions

1879 views

Brand new Non-restricted Action: Lever Stock Type: Fixed Magazine Capacity: 16 LR, 21 S Caliber/Gauge: 22 S/L/LR Twist Rate: 1:16″ Safety: 1/4 Cock Sight: Brass Bead Front, Fully Adjustable Semi-Buckhorn with Diamond Insert Rear Barrel Material: Steel Stock Material: American Walnut Barrel Finish: Blue Receiver Finish: Nickel Plated Stock Finish: Brown Barrel Length: 17″ Length of Pull: 13″ Overall Length: 33-3/4″ Weight: 6 lb Barrel Type: Octagon Scope ability: Drilled and Tapped Buttplate/Pad: Nickel Plated Scope Mount Type: GB-CSM Made in USA

categories:Sporting GoodsGuns

11670 impressions

950 views

Brand new Non-restricted Lever Action Caliber: .22 LR Capacity: 16 LR/21 S Barrel Length: 20″ Barrel Type: Octagon Blued Steel Rate of Twist: 1:16 Overall Length: 38.5″ Weight: 6.75 lbs Receiver Finish: Nickel Plated Rear Sight: Fully Adj. Semi-Buckhorn w/ Diamond Insert Front Sight: Beaded Stock Material: American Walnut Buttplate/Pad: Nickel Plated Made in USA

categories:Sporting GoodsGuns

12211 impressions

774 views

Durable polymer receiver Ambidextrous mag release, selector switch, sling points and charging handle Fixed aluminum carrying handle with Picatinny rail segement for mounting optics, iron sights, lights, lasers, and other accessories M-LOK mounting surfaces on the 3 and 9 o'clock positions Easily accessible gas valve located at the bottom of the stock can be swapped out to an HPA system A single magazine fill can fire a minimum of 70 rounds Single barrel shotgun design with 5 or 10 shot options Magazine Capacity: 105 Round Mid-Cap GOM V2 Magazine Gas Type: Green Gas (internal gas reservoir located in the stock) Fire Modes: Semi-Auto Hopup: Yes, Fixed Package Includes: Gun, Magazine, Manual Must be 18+ to purchase https://www.18plus.ca/products/g-g-esg-b-10-shotgun?_pos=1&_psq=b-10&_ss=e&_v=1.0

categories:Sporting GoodsPaintball and Airsoft

5005 impressions

728 views

Brand new Non-restricted Caliber: 38-55 Win Capacity: 5 Rounds Action: Lever Action Barrel Length : 20" Barrel Type : Round Blued Steel Rate of Twist : 1:18 Overall Length : 38.3" Weight : 7.5 lbs. Receiver Finish : Polished Brass Rear Sight : Fully Adj. Semi-Buckhorn w/ Diamond Insert Front Sight : Ramp w/ .062" Ivory Bead Scopeability : Drilled and Tapped Scope Mount Type : Weaver 63B Stock Material : American Walnut Buttplate/Pad : Brass Length of Pull : 14" Safety : Transfer Bar Made in USA

categories:Sporting GoodsGuns

11422 impressions

782 views

Brand new The Magpul X-22 Backpacker stock takes the function of our full-size Hunter X-22 Takedown, and pares it down for ease of storage and transportation. Made for the Ruger 10/22 Takedown rifle, the X-22 Backpacker offers a minimalist solution for the hunter or outdoorsman who wants to transport their rifle in an efficient, convenient package without compromising shooting performance. Constructed of a durable advanced polymer, the X-22 Backpacker features an ergonomic hand guard, optional QD sling mounting capability, integrated storage compartment in the grip, a hinged storage compartment in the stock capable of storing up to 3 spare 10rd magazines, a MOE SL non-slip rubber butt pad, and a unique locking interface to attach the barrel assembly to the receiver when being transported. Fits all Ruger 10/22 Takedown rifles as well as the Tactical Solutions SBX barrel. Drop-in design compatible with all factory Ruger 10/22 Takedown Unique locking interface to attach the barrel assembly to the stock body when being transported Reinforced polymer construction for strength and durability Ergonomic hand guard Comes with interchangeable standard and ‚ optic height‚ cheek risers Optional QD sling mounting capability Integrated storage compartment in the grip Hinged storage compartment in the stock capable of storing up to 3 spare 10rd magazines MOE SL nonslip rubber butt pad Made in USA

categories:Sporting GoodsGuns

17852 impressions

1298 views

Brand new Patent-pending design provides more than 98% flash elimination; virtually eliminates muzzle rise Serves as a rock-solid mounting adapter for SureFire SOCOM suppressors Multiple bearing surfaces provide suppressor alignment and prevent tines from ringing inside suppressor Port direction may be timed to optimize for right hand, left hand or neutral Precision machined from U.S. mill-certified, heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Individually inspected for all critical dimensions, including concentricity and alignment DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Installation requires no permanent modifications to weapon Durable construction delivers a long service life Color: Black Model No.: WARCOMP-556-M15x1 Caliber: 5.56x45mm NATO Finish: Matte black DLC coating Fabric/Material: US mill-certified heat-treated stainless steel Threads per Inch: M15x1 Gun Model: Heckler & Koch G36/HK MR223 Length: 3.6 in Weight: 3.9 oz Included Accessories: Suppressor Adapter

categories:Sporting GoodsGuns

6545 impressions

626 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2874 impressions

502 views

Brand new Non-restricted Lever Action Caliber: .22 LR Capacity: 16+1 Barrel Length:  20″ Barrel Type:  Octagon Blued Steel Rate of Twist:  1:16 Overall Length:  38.5″ Weight:  6.75 lbs. Receiver Finish:  Nickel Plated Rear Sight:  Fully Adj. Semi-Buckhorn w/ Diamond Insert Front Sight:  Brass Bead Scopeability:  Drilled and Tapped Scope Mount Type:  GB-CSM Stock Material:  American Walnut Buttplate/Pad:  Nickel Plated Length of Pull:  14″ Safety:  1/4 Cock Best Uses:  Target/Hunting/Collector Embellishments/Extras:  Receiver Engraving with 24K Gold Plating. Made in USA

categories:Sporting GoodsGuns

13565 impressions

885 views

Modeled after its real steel counterpart, the ProForce release of the SIG SAUER® MCX Virtus Airsoft AEG (Auto Electric Gun) Rifle does not disappoint. With a Full CNC machined receiver, integrated M-LOK™ handguard, 3-position telescoping stock, open full-length picatinny rail for the addition of sights, and a modular locking accessory mounting system. The MCX Virtus is an airsoft BB slinging brute with 120 round mid-cap magazine that keeps you active and engaged on the firing line. Features: Type: airsoft Power: Electric Material: metal & polymer Overall Length: 737 mm (29 in) Weight: 3 kg (7 lbs) Action: semi-automatic/full-automatic Barrel Length: 295 mm (11.6 in) Magazine Capacity: 120 rounds Ammo Type: airsoft BBs 6mm Muzzle Velocity: 420 FPS

categories:Sporting GoodsPaintball and Airsoft

9953 impressions

875 views

Brand new The Magpul forward sling mount is a sling attachment point for the Mossberg 590A1 series of shotguns designed to clamp directly onto the barrel and magazine tube. The sling Mount can be configured to accept either a push-button QD sling swivel or a one point clip in style attachment sling. It is constructed from precision cast steel that is melonite coated for enhanced wear and corrosion resistance. Made in USA

categories:Sporting GoodsGuns

6978 impressions

641 views

The Chiappa Rhino 60DS 4.5mm Black, The newest addition to the Rhino family developed by Chiappa themselves and manufactured by Wingun. This ultra realistic imitation firearm comes in black, nickel and limited edition gold. The realistic feel isn't the only thing going for the gun, a single CO2 cartridge fires approximately 34 shots with adjustable iron sights makes this a perfect plinking pistol. The 60DS stays true to the Rhino system, with the iconic barrel placement and sleek futuristic design, there is no doubt you're shooting a Chiappa! The Specs: Full Metal body and barrel Imitation wood grips with integrated CO2 key Single and double action Works on a single CO2 Capsule Picatinny mounting rail 6 shots Weighs 1080g

categories:Sporting GoodsPaintball and Airsoft

5327 impressions

705 views

Brand new Non-restricted Action: Lever Caliber: .22LR Capacity: 15+1 Safety: Half Cock Hammer Barrel Material: Steel Receiver Material: Steel Stock Material: Wood Barrel Finish: Blue Receiver Finish: Blue Stock Finish: Brown Barrel Length: 18-1/2″ Overall Length: 35-1/2″ Weight: 5.52 lb Made in Italy

categories:Sporting GoodsGuns

13776 impressions

1817 views