Alberta Buy and Sell / End Table

Browse the latest buy and sell ads across Alberta
Photo of WW2 1943 Canadian/British holster
$95
WW2 1943 Canadian/British holster
Here is a Canadian/British origin and the C broad arrow marking), and cross-referencing the images (including the faint stamping that reads “Z.L.&T. LTD 1943” along with the C broad arrow symbol), this is an original Canadian WWII Pattern 1937 (P37) web pistol holster. Features •  Khaki/tan heavy cotton canvas construction, typical of British/Commonwealth web gear from the era to save on leather due to wartime shortages. •  Flap closure with brass snap (often called a “lift-the-dot” fastener in some variants). •  Brass or metal belt hanger and loops on the back for attachment to P37 web belts or pistol belts. •  Angled design for right-side hip carry, with a reinforced muzzle end. •  Markings: “Z.L.&T. LTD 1943” refers to the manufacturer Zephyr Looms & Textiles Ltd. (Toronto, Canada), a known WWII contractor for Canadian military gear. The “C broad arrow” (often stylized as C↑ or C with an arrow inside) is the Canadian government property/acceptance mark, indicating it was issued for Canadian forces (part of the British Commonwealth system, where the broad arrow denotes ordnance property, and the “C” specifies Canada). This holster was designed primarily for revolvers like the Webley Mk IV .455 or Enfield No. 2 .38, which were standard for Canadian troops early in WWII. However, similar P37 holsters were also used or adapted for the Canadian-made Inglis Browning Hi-Power 9mm pistol (produced from 1944 onward). Original Canadian WWII P37 canvas holsters in good used condition (like this one, with intact hardware and no major tears) typically sell for $150–$350 on sites like eBay, GunsInternational, or militaria forums/auctions. Factors influencing price include: Invasion date1943 date (pre-U.S. entry into the war, during the British Commonwealth’s initial buildup). Clear markings (the C broad arrow and manufacturer stamp add provenance). Condition: This appears solid but field-used, so more toward the $200–$300 range. Recent comparable sales include similar Z.L.&T. Ltd.-made holsters from 1943–1945 fetching $200–$300. Can ship anywhere in Canada Please see my other ads for collectable military accessories.
categories:Sporting Goods
301 impressions
25 views
Chestermere, AB1 day ago
Photo of WW2 1940 Original Canadian WWII P37 canvas holster
$80.00
WW2 1940 Original Canadian WWII P37 canvas holster
Here is a Canadian/British origin and the C broad arrow marking), and cross-referencing the images (including the faint stamping that reads “Z.L.&T. LTD 1940” along with the C broad arrow symbol), this is an original Canadian WWII Pattern 1937 (P37) web pistol holster. Features •  Khaki/tan heavy cotton canvas construction, typical of British/Commonwealth web gear from the era to save on leather due to wartime shortages. •  Flap closure with brass snap (often called a “lift-the-dot” fastener in some variants). •  Brass or metal belt hanger and loops on the back for attachment to P37 web belts or pistol belts. •  Angled design for right-side hip carry, with a reinforced muzzle end. •  Markings: “Z.L.&T. LTD 1940” refers to the manufacturer Zephyr Looms & Textiles Ltd. (Toronto, Canada), a known WWII contractor for Canadian military gear. The “C broad arrow” (often stylized as C↑ or C with an arrow inside) is the Canadian government property/acceptance mark, indicating it was issued for Canadian forces (part of the British Commonwealth system, where the broad arrow denotes ordnance property, and the “C” specifies Canada). This holster was designed primarily for revolvers like the Webley Mk IV .455 or Enfield No. 2 .38, which were standard for Canadian troops early in WWII. However, similar P37 holsters were also used or adapted for the Canadian-made Inglis Browning Hi-Power 9mm pistol (produced from 1944 onward). Original Canadian WWII P37 canvas holsters in good used condition (like this one, with intact hardware and no major tears) typically sell for $150–$350 on sites like eBay, GunsInternational, or militaria forums/auctions. Factors influencing price include: Rarity of the early 1940 date (pre-U.S. entry into the war, during the British Commonwealth’s initial buildup). Clear markings (the C broad arrow and manufacturer stamp add provenance). Condition: This appears solid but field-used, so more toward the $200–$300 range. Recent comparable sales include similar Z.L.&T. Ltd.-made holsters from 1943–1945 fetching $200–$300. Can ship anywhere in Canada Please see my other ads for collectable military accessories.
categories:GunsSporting Goods
894 impressions
33 views
Chestermere, AB1 day ago
Photo of Antique Swedish Husqvarna Model 1887 Nagant 7.5mm Revolver, Shoots SMOKELESS .32 S&W Ammo!!!
$4500
Antique Swedish Husqvarna Model 1887 Nagant 7.5mm Revolver, Shoots SMOKELESS .32 S&W Ammo!!!
Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.
categories:GunsSporting Goods
16333 impressions
632 views
Calgary, AB3 days ago
Photo of Anschutz MPR 64 22LR, EP5 5-25x56 Rifle Scope
$2700
Anschutz MPR 64 22LR, EP5 5-25x56 Rifle Scope
Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g
categories:GunsSporting Goods
74407 impressions
2274 views
Calgary, AB5 days ago
Photo of Custom, Pre-made, (Your) T-Shirt, Wall Hanging, Baby, Memory, or Lap Quilts or Covid Face Mask Made to Your Specifications
Varies
Custom, Pre-made, (Your) T-Shirt, Wall Hanging, Baby, Memory, or Lap Quilts or Covid Face Mask Made to Your Specifications
I am a local business in the City of Lethbridge who makes various types of quilts to your style and taste. I have several machines in which I work from like several sit down sewing machines to an APQS "Freddie" long arm machine and an APQS "George" quilting sit down machine. I specialize in edge to edge and free motion quilting! I can take your unfinished quilt and turn it into a eye popping stand out masterpiece or do a simple (or intricate) edge to edge quilting with various pantographs I have on hand. I can turn those old t-shirts from your closet, stuffed in the back or box, and change them into a t-shirt quilt that will bring back loads of memories or a tear to your eye. Specializing in custom, memory or pre-made baby blankets, table runners, lap & full size quilts, wall hangings, place mats, your favorite sports team or super-hero blanket for your bed, camp-fire, or snuggle under it while watching a movie in the theater or in front of the television with your favorite show. A gift for your mother, grandmother, grand-daughter/son, daughter, sister, father, friend, or that special someone in your life to show them how much you care or have something from you that they can wrap themselves in. Making one of a kind pieces, as no two quilts are ever the same. If you can't find that certain blanket or quilt out there that you really want with the colors you are looking for, then have one made from me or pick from my pre-made selection. Pieces can be picked up from me or shipped to you (or shipped to me to start and mailed back). Call, text, or send me a message to my email address so we can chat about what masterpiece you want to start...prices vary from piece to piece so call or write soon! I am Dolores from "A Quilt by Dolores"
categories:CollectiblesHousehold Items
14409 impressions
1598 views
Lethbridge, AB3 weeks ago
Photo of Brand new TAC-12 "M3 Super 90" 12GA 20" Semi Auto/ Pump Action Shotgun $850
$850
Brand new TAC-12 "M3 Super 90" 12GA 20" Semi Auto/ Pump Action Shotgun $850
Brand New Non-Restricted Action: Semi Auto/ Pump Caliber: 12GA Capacity: 5 Barrel Length: 20" Ghost Ring Iron Sights Dual-Mode Capability Inertia-Driven Operating System Rough texture touchpoints Lifetime Warranty Coming with: Manual and choke tube kit. By using the receiver of an existing non-restricted shotgun we have been able to add M3 style components to achieve the same look, feel and function of the legendary M3 Super 90, but without the prohibited classification. The TAC-12 “M3 Super 90” is a dual-mode semi-automatic and pump action 12GA shotgun. It can be quickly converted from autoloading to pump by simply turning a spring loaded ring located on the end of the forearm. The M3 was developed in the 1980’s for special operations and elite law enforcement units who required a shotgun that could adapt to various tactical roles. It’s dual-mode system allows for effective operation of both standard and special purpose ammunition, (i.e. rubber, tear, flare, etc.) on the fly. The M3 was designed to operate under the most adverse conditions and boasts easy handling, accuracy and a high rate of fire. Notable adopters include the Canadian JTF2, Czech 601st Special Forces Group and French GIGN. The TAC-12 “M3 Super 90” features a 20” barrel threaded for interchangeable chokes. It has a 3” chamber and is fed by a 5-shot tubular magazine (6 shots, 2.75”). The extended magazine tube features a barrel clamp for additional durability. There is a magazine cut-off/chamber-dump button so the shooter can directly chamber a special round without having to cycle through the entire magazine. Fixed on top of the receiver are 3-dot ghost-ring sights for fast target acquisition, and tapped holes for the addition of an optional top picatinny rail. The stock is fixed polymer with non-slip grip checkering, with a rubber buttpad and a sling loop located on both sides. The pump handle is ergonomically shaped with non-slip channels for use with gloves or in wet environments. As the original, it is operated by the proven inertia system. This system delivers unmatched reliability, cleaner operation, and lightning-fast cycling in a lightweight, ultra-durable design. With fewer moving parts and minimal maintenance, it handles the toughest conditions with ease.
categories:GunsSporting Goods
6384 impressions
503 views
Calgary, AB4 weeks ago
Photo of Food Counter Attendant
$15.00
Food Counter Attendant
Education: Secondary (high) school graduation certificate or equivalent experience Experience: Experience an asset Responsibilities/Tasks: Greet and welcome guests with a smile, eye contact, and a sincere 'thank you'. Take guest orders including coffees, Iced Capps®, donuts, muffins and more! Build delicious sandwiches and wraps Follow Tim Hortons standards and guidelines when preparing products for our guests as well as follow all operating guidelines for each piece of equipment Clear and clean tables, trays, and chairs Operate dishwashers to wash dishes, glassware and flatware Scour pots and pans Keep records of the quantities of food used Package take-out food Rotational back of the house Clean and sanitize kitchen including work surfaces, cupboards, storage areas, appliances and equipment Handle and store cleaning products Receive, unpack and store supplies in refrigerators, freezers, cupboards and other storage areas Remove kitchen garbage and trash Sweep, mop, wash and polish floors Experience and specialization: Electronic cash register Food dispensers Grill Additional information on Weight handling: Up to 23 kg (50 lbs) Job Types: Full-time, Part-time, Permanent Work conditions and physical capabilities: Fast-paced environment Multi-tasker Standing for extended periods Physically demanding Personal suitability: Efficient interpersonal skills Flexibility Team player Work Location: In person
categories:Business and ServicesJobs
5363 impressions
669 views
Westlock, AB1 month ago
Showing 21 of 102 records