Gun stock duplicator is new custom made it is complete unit and ready to use to dupliced stock ,carving parts or more On 110 volts For sale trade consider for quality gun ,mill lathe ,honda gen or ?

categories:Sporting Goods

1770 impressions

198 views

Chinese sling (two variants) $40 shipped Oiler $10 (still in package, photo of my personal one) Cleaning kit $15 shipped Amber shellac touchup: this service will help you restore flaking SKS/mosin/svt or any gun stock that uses shellac shipping extra

categories:GunsSporting Goods

75119 impressions

3335 views

Seeking: SKS whole gun without stock, hopefully really cheap or complete gun <$300 Mauser barreled actions, or complete receiver. $100-200? .22 w/i $150  12 gauge pump or semi w/i $200 or projects project gun welcomed too (no missing action parts. missing/broken handguard or stock, even missing sights is ok) Prefer local

categories:GunsSporting Goods

115473 impressions

5681 views

Czech K98k in 8x57 Manufactured after WWII at Brno factory.The L serial block id makes it 1946-1947. All numbers matching except the safety and cocking piece were numbered when factory was reusing some old parts. Matching number laminated stock. This is the K98k that was the predecessor to VZ24. It has the typical rampant lion crest. Turned-down bolt handle. Very clean example. Excellent shape. No rust. Value is $1600-$1900 condition depending. This one is very clean in excellent+ condition. Price is $1600 obo. Located in Calgary. Will ship within Canada. Buyer pays shipping. Valid PAL and gun transfer reference number will be required.

categories:GunsSporting Goods

7201 impressions

602 views

needs to go to a gun smith or used as parts

categories:GunsSporting Goods

744 impressions

90 views

Yildiz Pro White Adjustable 12GAx3″ 32″ barrels with Adjustable Comb Robust Boss locking system reduces felt recoil & muzzle flip 4140 Chromium Molybdenum High-Tensile Steel barrels, action & parts Right hand palm swell Exquisitely-grained  Grade 4 exhibition-grade Turkish walnut furniture Hinge pins are replaceable for ease of maintenance 733 chrome-lined bores for a lifetime of durability and performance Silver soldered ribs for longevity and barrel integrity Fitted Hard Case Comes with 5 chokes In excellent condition (spare a minor scratch on the butt stock shown in one of the photos) Less than 300 rounds through it, shoots great with no issues at all Can ship for extra Will entertain partial trades (of particular interest are Beretta 1301, Benelli M4, Beretta Ultima A400, Vortex Fury 5000 AB, Vortex Razor Long Range Scopes and Yugo SKS)

categories:GunsSporting Goods

34415 impressions

1221 views

used & tested working as it should CROSMAN CO2 357 6 SHOT SINGLE OR DOUBLE ACTION 177 AIRGUN in original box with all accs and MATCHING SERIAL NUMBERS complete as seen in pics OWN A PIECE OF HISTORY 200 OBO no returns due to parts swapping pictures tell everything

categories:GunsSporting Goods

31988 impressions

2880 views

Will BUY GUNS!!   Will buy singles, parts guns, accessories, or collections. Located in southern Alberta, but will travel if required Will pay fair prices! 403 818-0864

categories:GunsSporting Goods

3911 impressions

270 views

Brand new This is NOT a pistol but still needs a valid PAL to buy it. The LEGION Series from SIG SAUER expands to an all-inclusive P320-FLUX package. A fully modular platform comes complete with a LEGION gray FLUX chassis and integrated compensated LEGION slide. The P320-FLUX LEGION meshes a 9mm handgun with a PCC style platform, bringing the speed, maneuverability, and concealability of a pistol, combined with the stability of a carbine. Designed with feedback from the Special Operations Community, the P320-FLUX LEGION delivers a host of innovative features and enhancements, including a single-finger fast spring brace for rapid deployment, flared integral magwell, front picatinny mount for a variety of accessories, ambidextrous safety, dual mag release system, two 10-round magazines, and a non-reciprocating picatinny optic mount for endless customization. Rapid Deploying Stabilizing Brace Ambidextrous Dual Magazine Release System LEGION Gray Slide With Integrated Compensator Non-Reciprocating Picatinny Optic Mount Integrated Flared Magwell IMPORTANT NOTE: This product is a Parts Kit ONLY, FCU (serialized component) is NOT included The 30Rd magazines shown on the pictures NOT included due to magazine capacity restriction in Canada, will include 2x 10-Round P320 magazines The barrel on the Canadian import version will be 4.2” due to barrel length restrictions. You will still be able to utilize one of the compensator port integrated on the slide.

categories:Sporting Goods

2112 impressions

362 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

19901 impressions

731 views

Many Czech produced post-war Mausers were made with mostly late war and some newly produced parts. These were sold to various different militaries and on the commercial market many and of these were sold to the Israelis as well. The rifle features many late war stamped parts including the oversized winter trigger guard but does include a half size cleaning rod unlike the Kriegsmodell K98's produced by the Germans. It does not have a stock disk, as it just has a hole drilled in the butt cap for disassembly of the bolt. This particular example has a low serial number, but the serial number ranges are all over because of different contracts. The whole gun matches with the new forced match serial number. It has a scrubbed receiver, and has a beech wood stock and handguard in a nice brown color. The rifle bore is actually in very good shape, but there is some stubborn fouling stuck in there and I don't have a 32 Caliber cleaning brush to remove it but I'm sure if you use the proper brush it should come out pretty easy since it's not rust. Just shooting the rifle might even remove it. The muzzle crown is an excellent condition as pictured. The rifle does have minor some stock damage. It looks like a vice dent or some sort of hammering pattern, but it's only on the one side (pictured). Overall the gun is in very good original condition and the action is nice and smooth and it is unfired by me. This is a nice unique example of a k98 made by Brno, who is very well known for their quality produced firearms. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:GunsSporting Goods

16029 impressions

958 views

I’m offering Gunsmithing services for $75/hr plus parts and shop supplies. Full Disassembly and cleaning Scope Mounting \ Bore Sighting Trigger adjustment Scope Ring lapping (only if necessary) Broken Case extraction Stripped Screw repair Diagnosis \ Broken part repair \ replacement Stock repair Rust removal \ Repair Restoration Field Testing Let me know what you need Non-restricted and restricted only, Sorry I can’t work on anything that’s currently prohibited. Pal required   Also, I may be interested in purchasing damaged \ broken \ or seized guns

categories:Business and Services

447 impressions

121 views

All gunsmith related tools, parts,manuals gun digest back to 1951. Compressor,metal lathe lots of gun related books store counter all shelves everything must go

categories:Garage saleHousehold Items

1705 impressions

463 views

Tools,lathe,gun parts,manuals for guns,etc

categories:Tools and Equipment

385 impressions

126 views

Like new Beretta A400 Xtreme Plus Semi-Auto Shotgun - 12 Gauge. It has had about 200 rounds through it. meticulously taken care of. Comes will all original parts and case. 7809919289

categories:GunsSporting Goods

4880 impressions

347 views

Bought as a possible project but I changed my mind. Doesn't have a bolt or magazine. 23inch barrel, seems to have decent rifling but it's pretty dirty. Trigger feels decent, hopefully there are some other parts somebody can use.

categories:GunsSporting Goods

1858 impressions

224 views

Old ranger 12gauge shotgun for parts only

categories:GunsSporting Goods

8236 impressions

730 views

One vinyl 43" gun case $20 Two vinyl 45" gun cases $20 EACH Four Nylon 52" gun cases $25 EACH One Bushnell ScopeChief 4xpower $85 Three Weaver Scopes 4xpower $45 EACH Three Rifle Stocks $25 EACH Two gun grips $20 EACH

categories:GunsSporting Goods

1608 impressions

136 views

12 ga. double barrel, side by side, shotgun. manufactured by P [Paul] Webley] & Son of Shaftsbury Avenue London England. This firearm was manufactured before the manufacturer changed its name to Webley & Scott in 1897. 2.75 in. chambers. fixed chokes. double triggers. internal hammers. automatic safety. Hawkins recoil pad. double bead sight. All metal parts including the rib and both barrels are covered in intricate beautiful engraving. Wooden stock and wooden fore stock are both delicately checkered. Well cared for. Has not been fired for many decades. No rust or pitting on any metal parts. Stock has a few scratches and dents but no cracks. There is a small hairline crack on the upper right side of the fore stock. price includes an interesting looking old worn leather take down carrying case and a vintage cleaning kit in an old wooden box. more photos available on request. the shotgun was not stored in the leather carrying case.

categories:GunsSporting Goods

4145 impressions

359 views

12 ga. double barrel side by side shotgun. Made by G [George] Bate a famous English gunmaker from Birmingham England. double triggers. double exposed hammers. 2.5 inch chambers. all the metal parts of the firearm are covered with delicate intricate engraving. the barrels appear to be Damascus steel. There is no serial number from the manufacturer. There is a serial number sticker from the Canadian Firearms Registry on the side of the receiver from when the firearm was registered under the now defunct long gun registry. all old firearms records for this gunmaker were destroyed in the 1940's when the factory was bombed in WWII. The gun was made between the 1890's and the 1920's. G Bate Maker, changed its name to G Bate Ltd in the 1920's. in the 1990's the name was changed to Bate & Cross [Gunmaker] Ltd. it has been well cared for. there is no rust and no pitting. the wooden stock has some scratches and dents but is not cracked. it has not been fire for many decades.

categories:GunsSporting Goods

3754 impressions

365 views

You must have an exemption letter and be qualified to buy this pistol license wise . Alien Pistol Semi Automatic 9mm. Gas operated Pistol not standard blowback. Regarded as a pistol advanced beyond other pistols the Alien has many features not available on standard handguns. Included is the full kit plus 4 magazines for a total of 7 magazines and a spare gas pistol system and parts kit. These kits sell to the USA for $5000 without extra mags or parts. Pistol has lowest bore axis of any pistol. That means the Bore is lower than the hand holding the pistol leading to minimal muzzle flip. The pistol features an standard pistol sight rail "irons" and a Sight rail with A Red dot designed for the Alien. The toolless exchange design requires the shooter only to press out a pin to exchange slides. The process takes less than 15 seconds. This pistol has been fired for a total of 500 rounds. By far the most accurate pistol I have ever fired in over 40 years. From the Laugo Arms website The Laugo Arms Alien Full Kit is the ultimate package for enthusiasts and competitive shooters. Iron Sight Top Rail and Optic Top Rail equipped with a Laugo Arms red dot sight are both included for maximum versatility. A magwell and Elornis Industries holster system complete the setup for optimal performance at the range. FULL KIT INCLUDES: Laugo Arms Alien pistol FINISH: Duotone Black / Green Three (3) 17 Round Magazines (10rnd Limited Capacity Magazines also available) Standard Fiber Optic Iron Sight Top Rail Optic Top Rail with Laugo Red Dot Sight Aluminum Magwell Elornis Holster and Adjustable Mounting System Cleaning Supplies Tool kit Dry-Fire Training Chamber Insert Custom Hard Case – Large Willing to take Gold and Silver Bullion on Trade. I don't have an exemption letter so I cannot accept trades of pistols. I am looking for a Winchester Deluxe 1892 takedown model with a 16" barrel in .357 magnum but that's all for firearms trades. If you have any questions about the pistol please ask as long as you have the exemption status.

categories:GunsSporting Goods

22511 impressions

2377 views